Effect of reduction treatment on copper modified activated carbons on NO(x) adsorption at room temperature

Activated carbon was impregnated with copper salt and then exposed to reductive environment using hydrazine hydrate or heat treatment under nitrogen at 925 °C. On the obtained samples, adsorption of NO(2) was carried out at dynamic conditions at ambient temperature. The adsorbents before and after exposure to nitrogen dioxide were characterized by X-ray diffraction (XRD), thermal analysis, scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM-EDX), X-ray photoelectron spectroscopy (XPS), N(2)-sorption at -196 °C, and potentiometric titration. Copper loading improved the adsorption capacity of NO(2) as well as the retention of NO formed in the process of NO(2) reduction on the carbon surface. That improvement is linked to the presence of copper metal and its high dispersion on the surface. Even though both reduction methods lead to the reduction of copper, different reactions with the carbon surface take place. Heat treatment results in a significant percentage of metallic copper and a reduction of oxygen functional groups of the carbon matrix, whereas hydrazine, besides reduction of copper, leads to an incorporation of nitrogen. The results suggest that NO(2) mainly is converted to copper nitrates although the possibility to its reduction to N(2) is not ruled out. A high capacity on hydrazine treated samples is linked to the high dispersion of metallic copper on the surface of this carbon.     

Electrophoretic motion of a nanorod along the axis of a nanopore under a salt gradient

Wood-based activated carbon was modified by deposition of silver using Tollens method. Adsorbents with various contents of silver were used to study NO(2) and NO (the product of NO(2) reduction by carbon) retention. The surface of the initial and exhausted materials was characterized using adsorption of nitrogen, XRD, SEM/EDX, FTIR and TA. The results indicated that with an increasing content of silver on the surface the capacities to retain NO(2) and NO increase until the plateau is reached. The performance depends on the dispersion of nanoparticles and their chemistry. Highly dispersed small silver metal particles promote formation of chelates with NO(2) and/or with NO. An excess of Tollens reagent results in formation of larger silver crystals and silver oxide nanoparticles. If sufficiently dispersed, they also enhance the retention of NO(2) via formation of nitrates deposited in the pore system. The surface of the carbon matrix is also active in NO(2) retention, providing the small pores and edges of graphene layers, where the reductions of NO(2)/oxidation of carbon take place.     

Low-temperature catalytic adsorption of NO on activated carbon materials

The catalytic adsorption of NO on activated carbon materials provides an appropriated alternative for the control of low-concentration emissions of this air pollutant. The surface complexes formed upon NO adsorption at 30 degrees C were studied by X-ray photoelectron spectroscopy (XPS) and temperature-programmed desorption (TPD). The effects of the addition of O2 and the presence of copper as a catalyst were studied. Copper assisted the oxygen transfer to the carbon matrix. For the Cu-impregnated carbon sample, the presence of O2 favored NO adsorption by increasing the breakthrough time, the adsorption capacity, and the formation of nitrogen and oxygen complexes of higher thermal stabilities, which mainly desorbed as NO and CO2.     

Complexity of ammonia interactions on activated carbons modified with V2O5

A micro/mesoporous wood-based activated carbon was modified with different loadings of vanadium pentoxide via incipient impregnation with ammonium vanadate solution followed by heating in nitrogen at 500 degrees C. The materials were used as adsorbents for ammonia. Both adsorption and desorption curves were recorded. The initial and exhausted samples were characterized by Fourier transform infrared spectroscopy (FTIR), potentiometric titration, thermal analysis and adsorption of nitrogen. An improvement in ammonia uptake compared to the virgin carbon was observed, and the adsorption capacity was found linearly dependent on the metal content. Water increases ammonia adsorption capacity via dissolution of the gas, but it also competes with ammonia because both of them are preferentially adsorbed on the same vanadium oxide sites (vanadyl oxygens). Even though an increase in the interactions strength between ammonia and the adsorbents' surface has been reached compared to previous studies, some weakly adsorbed ammonia was still released from the surface during air purging.     

胺类分子在LiMOR分子筛中吸附的量子化学研究

 采用量子化学方法(ONIOM,B3LYP/6-31G(d,p):HF/3-21G)研究了锂型丝光沸石(LiMOR)的结构及其对胺类分子的吸附性能. 在校正基组迭加误差的基础上计算得到氨、甲胺、二甲胺和三甲胺分子的吸附热分别为117.6,132.7,122.2和106.0 kJ/mol,表明胺分子在LiMOR分子筛上吸附强度的次序为三甲胺＜氨＜二甲胺＜甲胺. 通过结构优化得到了吸附复合物的平衡几何参数、电子结构数据以及N-H键伸缩振动频率,胺分子与分子筛之间的主要作用力为氮上的孤对电子和锂离子之间的静电作用力,胺分子与分子筛骨架氧之间的弱氢键作用对其吸附有一定的稳定作用.     

Dimethylformamide as a carbon monoxide source in fast palladium-catalyzed aminocarbonylations of aryl bromides

Dimethylformamide (DMF) acts as an efficient source of carbon monoxide and dimethylamine in the palladium-catalyzed aminocarbonylation (Heck carbonylation) of p-tolyl bromide to provide the dimethylamide. Addition of amines to the reaction mixture in excess delivers the corresponding aryl amides in good yields. The amines employed, benzylamine, morpholine, and aniline, all constitute good reaction partners. The reaction proceeds smoothly with bromobenzene and more electron-rich aryl bromides, but electron-deficient aryl bromides fail to undergo aminocarbonylation. The reactions are conducted at 180-190 degrees C for 15-20 min with microwave heating in a reaction mixture containing imidazole and potassium tert-butoxide: the latter is required to promote decomposition of the DMF solvent at a suitable rate. The beneficial effects of controlled microwave irradiation as an energy source for the rapid heating of the carbonylation reaction mixture are demonstrated. The carbonylation procedure reported herein, which relies on the in situ generation of carbon monoxide, serves as a convenient alternative to other carbonylation methods and is particularly applicable to small-scale reactions where short reaction times are desired and the direct use of carbon monoxide gas is impractical.     

Ammonolysis of Glyoxal at the Air-Water Nanodroplet Interface

The reactions of glyoxal (CHO)₂) with amines in cloud processes contribute to the formation of brown carbon and oligomer particles in the atmosphere. However, their molecular mechanisms remain unknown. Herein, we investigate the ammonolysis mechanisms of glyoxal with amines at the air-water nanodroplet interface. We identified three and two distinct pathways for the ammonolysis of glyoxal with dimethylamine and methylamine by using metadynamics simulations at the air-water nanodroplet interface, respectively. Notably, the stepwise pathways mediated by the water dimer for the reactions of glyoxal with dimethylamine and methylamine display the lowest free energy barriers of 3.6 and 4.9 kcal ⋅ mol⁻¹, respectively. These results showed that the air-water nanodroplet ammonolysis reactions of glyoxal with dimethylamine and methylamine were more feasible and occurred at faster rates than the corresponding gas phase ammonolysis, the OH+(CHO)₂ reaction, and the aqueous phase reaction of glyoxal, leading to the dominant removal of glyoxal. Our results provide new and important insight into the reactions between carbonyl compounds and amines, which are crucial in forming nitrogen-containing aerosol particles.     

Carbon-nitrogen place exchange on NO exposed beta-Mo2C

Atomic nitrogen and oxygen were deposited on beta-Mo(2)C through dissociative adsorption of NO. Reflectance absorbance infrared spectroscopy (RAIRS), thermal desorption, and synchrotron X-ray photoelectron spectroscopy (XPS) measurements were used to investigate the interplay between atomic nitrogen, carbon, and oxygen in the 400-1250 K region. The combination of the high resolution and high surface sensitivity offered by the synchrotron XPS technique was used to show that atomic nitrogen displaces interstitial carbon onto the carbide surface. Thermal desorption measurements show that the burnoff of the displaced carbon occurs at approximately 890 K. The incorporation of nitrogen into interstitial sites inhibits oxygen dissolution into the bulk. RAIRS spectroscopy was used to identify surface oxo, terminal oxygen, species formed from O(2) and NO on beta-Mo(2)C.     

Electrochemical behavior of nitrogen gas species adsorbed onto boron-doped diamond (BDD) electrodes

The adsorption of nitrogen species, in neutral electrolyte solutions, onto boron-doped diamond (BDD) electrode surfaces from dissolved NO2, NO, and N2O gases was induced at 0 V/SCE. Modified BDD electrode surfaces showed a different electrochemical response toward the hydrogen evolution reaction than did a nonmodified electrode surface in electrolyte base solution. The formation of molecular hydrogen and nitrogen gaseous species was confirmed by the online differential electrochemical mass spectrometry (DEMS) technique. Among the three nitrogen oxides gases, NO2 substantially modifies the electrolyte via hydrolysis leading to the formation of NO3- and its adsorption on the BDD electrode surface. The BDD/(NO3-) interface was the only N2O and N2 species generating system.     

钯催化芳香硝基化合物与烯烃的选择性还原羰化酰胺化反应

与芳香胺相比,芳香硝基化合物具有廉价易得、官能团兼容性好等优点,作为氮源在下游含氮化学品合成中具有广泛的应用.目前烯烃羰化酰胺化反应绝大多数以胺类化合物为氮源,其中直链和支链酰胺产物的选择性主要是通过具有特定电子和位阻特性的配体调控实现.已报道的芳香硝基化合物的还原酰胺化反应研究中,需要外加还原剂或者利用金属羰基化合物Mo(CO)6释放的CO为羰基源和还原剂.本文发展了一种毋须外加还原剂的钯催化芳香硝基化合物与烯烃的还原羰化酰胺化反应新方法.研究发现,钯金属催化剂(特别是离子型)的抗衡阴离子是还原羰化酰胺化反应中化学选择性和羰化区域选择性的关键因素.抗衡阴离子为氯离子、硼酸为助剂时,最优钯前驱物K2PdCl4的产物主要为支链酰胺,此时不同的膦配体并不能调控其区域选择性,这与胺的烯烃酰胺化反应可以通过配体调控羰化的区域选择性表现出明显的不同.含氮中间体原位捕捉、硝基化合物还原下游可能中间体对照实验等研究表明,芳香硝基化合物在以一氧化碳为还原剂的催化还原体系下被完全脱氧还原为氮烯(Ar-N:),再经过烯酰胺中间体进一步烯键还原得到相应的支链酰胺;当离子型钯前驱物的抗衡阴离子配位性较弱时,最优钯前驱物为Pd(CH3CN)4(OTf)2时,以直链酰胺为主要产物,此时不同的膦配体可以调控酰胺化的区域选择性.同样的机理研究表明,在该催化剂体系下芳香硝基化合物首先被还原为芳基胺,然后再发生与现有报道类似的胺类化合物的烯烃羰化酰胺化反应.这两个催化反应体系都表现出了较好的底物适用性,并且可以高效地应用于除草剂(敌稗)的一步合成.本文为以硝基化合物为起始氮源,通过催化控制生成特定含氮中间体,从而可控合成不同的含氮化学品提供了一条新思路.     

Role of surface chemistry in adsorption of phenol on activated carbons

Two samples of activated carbon of wood origin were oxidized using ammonium persulfate. The structural properties and surface chemistry of the samples and their oxidized counterparts were characterized using sorption of nitrogen and Boehm titration, respectively. Phenol adsorption from solution (at trace concentrations) was studied at temperatures close to ambient without maintaining a specific pH of the solution. The results showed, as expected, that the phenol uptake is dependent on both the porosity and surface chemistry of the carbons. Furthermore, phenol adsorption showed a strong dependence on the number of carboxylic groups due to two factors: (1) phenol reacts with carboxylic groups on the carbon surface, forming an ester bond, and (2) carboxylic groups on the carbon surface remove the pi-electron from the activated carbon aromatic ring matrix, causing a decrease in the strength of interactions between the benzene ring of phenol and the carbon's basal planes, which decreases the uptake of phenol.     

活性炭纤维吸附脱除NO过程中NO氧化路径分析

在小型固定床吸附实验台上开展了黏胶基活性炭纤维吸附脱除NO的实验研究。采用H₂O₂溶液浸渍以及热处理方法对活性炭纤维表面进行修饰,以获得表面孔隙结构接近而含氧官能团含量不同的样品;考察样品在惰性氮气气氛、含氧气氛下吸附脱除NO的效果,以及表面含氧含氮官能团的变化规律。探讨了含氧官能团在NO催化氧化过程中的作用及含氧气氛下O₂对于NO转化为NO₂的影响,分析了活性炭纤维表面吸附的NO向NO₂的主要转化途径。结果表明,在氮气气氛下活性炭纤维表面C-O官能团对吸附态的NO起到氧化作用,吸附态NO被C-O官能团氧化生成-NO₂官能团;在含氧气氛下活性炭纤维吸附NO后表面出现-NO₂、-NO₃官能团,通过长时间实验测定三种样品在含氧气氛下对NO吸附的效果,发现三种样品稳定时催化氧化效果一致,表明含氧官能团对初始NO的物理吸附影响较大,而对整个吸附过程影响较小。吸附在活性炭纤维表面上的NO与环境气氛中的游离态O₂发生氧化反应是NO转变为NO₂的主要途径。     

Uniformly carbon-covered alumina and its surface characteristics

Uniformly carbon-covered alumina (CCA) was prepared via the carbonization of sucrose highly dispersed on the alumina surface. The CCA samples were characterized by XRD, XPS, DTA-TG, UV Raman, nitrogen adsorption experiments at 77 K, and rhodamine B (RB) adsorption in aqueous media. UV Raman spectra indicated that the carbon species formed were probably conjugated olefinic or polycyclic aromatic hydrocarbons, which can be considered molecular subunits of a graphitic plane. The N(2) adsorption isotherms, pore size distributions, and XPS results indicated that carbon was uniformly dispersed on the alumina surface in the as-prepared CCA. The carbon coverage and number of carbon layers in CCA could be controlled by the tuning of the sucrose content in the precursor and impregnation times. RB adsorption isotherms suggested that the monolayer adsorption capacity of RB on alumina increased drastically for the sample with uniformly dispersed carbon. The as-prepared CCA possessed the texture of alumina and the surface properties of carbon or both carbon and alumina depending on the carbon coverage.     

An XPS and STM study of the size effect in NO adsorption on gold nanoparticles

The effect of the gold particle size, temperature of the model gold catalyst, and NO pressure on the composition of the adsorption layer was studied by in situ XPS and STM methods. Adsorption of nitric oxide was carried out on gold nanoparticles with a mean size of 2?C7 nm prepared on the thin film surface of alumina. In high-vacuum conditions (P _NO ?? 10^?5 Pa), only atomically adsorbed nitrogen is formed on the surface of gold nanoparticles. At about 1 Pa pressure of NO and in the temperature range from 325 to 475 K, atomically adsorbed nitrogen coexists with the N₂O adsorption complex. The surface concentration of the adsorbed species changes with a change in both the mean gold particle size and adsorption temperature. The saturation coverage of the surface with the nitrogen-containing complexes is observed for the sample with a mean size of gold particles of 4 nm. The surface of these samples is mainly covered with atomically adsorbed nitrogen, the saturation coverage of adsorbed nitrogen of about ??0.6 monolayer is attained at T = 473 K. The change in the composition of the adsorption layer with temperature of the catalysts agrees with the literature data on the corresponding temperature dependence of the selectivity of N₂ formation observed in the catalytic reduction of NO with carbon monoxide on the Au/Al₂O₃ catalyst. The dependences of the composition of the adsorption layer on the mean size of Au nanoparticles (size effect) and temperature of the catalyst are explained by the sensitivity of NO adsorption to specific features of the gold surface.     

Synthesis of Pyridazine Dicarboxamides via Highly Selective Palladium‐catalyzed Aminocarbonylation

Highly selective palladium‐catalyzed aminocarbonylation of 3,6‐diiodopyridazine with various primary and secondary amines including amino acid esters was carried out. Because of the simple carbon monoxide insertion regarding both iodoarene functionalities, the corresponding 3,6‐diamides were synthesized in moderate to high yields. The exclusive formation of amides, that is, the missing of 2‐ketoamides which might be formed via double carbon monoxide insertion, can be explained by the close proximity of the nitrogen of the aromatic ring to the iodo substituent. The unexpected selectivity of the aminocarbonylation is rationalized by a mechanistic approach.     

NO adsorption on the stoichiometric and reduced SnO2(110) surface

The adsorption of NO molecules on the perfect and defective (110) surfaces of SnO₂ was studied with first-principles methods at the density-functional theory level. It was found that NO mainly interacts via the nitrogen atom with the bridging oxygens of the stoichiometric surface while the coordinatively unsaturated surface Sn atoms are less reactive. On the oxygen-deficient surface, NO is preferentially adsorbed at the vacancy positions, with the nitrogen atom close to the former surface oxygen site. Regardless of the adsorption site, the unpaired electron is located mainly on the NO molecule and only partly on surface Sn atoms. The results for the SnO₂ surface are compared to literature results on the isostructural TiO₂ rutile (110) surface. Dedicated to Professor Karl Jug on the occasion of his 65th birthday     

Role of surface-bound intermediates in the oxygen-assisted synthesis of amides by metallic silver and gold

A general mechanism for the oxygen-assisted synthesis of amides over metallic gold and silver surfaces has been derived from the study of acetaldehyde and dimethylamine in combination with previous work, allowing detailed comparison of the two surfaces' reactivities. Facile acetylation of dimethylamine by acetaldehyde occurs with high selectivity on oxygen-covered silver and gold (111) crystals via a common overall mechanism with different rate-limiting steps on the two metals. Adsorbed atomic oxygen activates the N-H bond of the amine leading to the formation of an adsorbed amide, which attacks the carbonyl carbon of the aldehyde, forming an adsorbed hemiaminal. Because aldehydes are known to form readily from partial oxidation of alcohols, our mechanism also provides insight into the related catalytic coupling of alcohols and amines. The hemiaminal β-H eliminates to form the coupled amide product. On silver, β-H elimination from the hemiaminal is rate-limiting, whereas on gold desorption of the amide is the slow step. Silver exhibits high selectivity for the coupling reaction for adsorbed oxygen concentrations between 0.01 and 0.1 monolayer, whereas gold exhibits selectivity more strongly dependent on oxygen coverage, approaching 100% at 0.03 monolayer. The selectivity trends and difference in rate-limiting steps are likely due to the influence of the relative stability of the adsorbed hydroxyl groups on the two surfaces. Low surface coverages of oxygen lead to the highest selectivity. This study provides a general framework for the oxygen-assisted coupling of alcohols and aldehydes with amines over gold- and silver-based catalysts in either the vapor or the liquid phase.     

Solid-phase synthesis of urea and amide libraries using the T2 triazene linker

Starting from Merrifield resin, primary amines were immobilized in two steps by triazene linkage (T2-linker). While reaction with isocyanates gave rise to resin-bound urea derivatives, acylation by acid chlorides or anhydrides furnished amides bound to solid support via the nitrogen atom, therefore representing a novel backbone amide linker. Cleavage from the resin was conducted using dilute trimethylsilyl chloride or trifluoroacetic acid, respectively, to yield ureas and amines/amides in a library format (altogether 60 examples; manual synthesis: 17 ureas, 6 mono-alkylated ureas [including dihydroxylation and ozonolysis/Wittig reaction]; automated synthesis: 15 ureas, 15 amides) in high purities and good overall yields. The synthesis of a small library (4 x 4 member) was successfully conducted on a Bohdan Neptune synthesizer.     

Catalytic reduction of NO by CO over Pd — doped Perovskite-type catalysts

The perovskite type oxides (nominal formula LaTi_0.5Mg_0.5O₃) with addition of Pd were prepared by annealing the ethanol solution of precursors in nitrogen flow at 1200°C and characterized by X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and temperature programmed desorption of NO (NO-TPD). Their activity was evaluated for NO reduction by CO under stoichiometric and oxidizing conditions and for direct decomposition of NO. Pd substituted samples exhibited high NO reduction activity and selectivity towards N₂. Nearly complete elimination of NO was achieved at 200°C. Two simultaneous reactions, NO reduction by CO and direct decomposition of NO as well as two forms of NO adsorption were observed on the surface of Pd substituted perovskite samples. The distribution of Pd in different catalytically active sites or complexes on at the catalyst surface may be responsible for the proceeding of two reactions: NO reduction with CO and direct NO decomposition.      

Interactions of NO2 with amine-functionalized SBA-15: effects of synthesis route

SBA-15 mesoporous silica was modified using (3-aminopropyl)trimethoxysilane (APTMS) following co-condensation or grafting methods and then used as a NO(2) adsorbent at room temperature. The samples were characterized before and after exposure to NO(2) by SEM-EDX, N(2) adsorption at 77 K, potentiometric titration, thermal analysis, and FTIR spectroscopy. Even though, regardless of the synthesis route, the addition of propylamine groups leads to a significant enhancement in the amount of NO(2) adsorbed (from 21 to 124 mg(NO(2))/g), a higher retention of NO(2) and NO (released as a result of surface reactions) was measured on the grafted silica than on all of the co-condensed samples. In the case of the latter materials, improvements in both NO(2) adsorption capacity and NO retention were found for the samples treated with NaOH. This behavior is related to the higher reactivity of deprotonated propylamine groups (formed during NaOH treatment) with NO(2), the presence of silanol groups, and the residual amount of sodium present in the samples. The mechanism of NO(2) adsorption on propylamine groups involves the formation of nitramine and/or nitrosamine. Analysis of the spent materials indicates that the porosity of co-condensed materials is not affected to the same extent by adsorption of NO(2) as that of the grafted silica.