Ordered arrays of gold nanostructures from interfacially assembled Au@PNIPAM hybrid nanoparticles

In this Article, we report on the assembly of hybrid Au@PNIPAM core-shell particles at the air/water interface, their transfer onto solid substrates, and the controlled combustion of the organic material to produce arrays of gold nanoparticles. A detailed investigation on the assembly behavior of such soft hybrid colloids at the air/water interface was performed by correlating the surface pressure-area isotherms with SEM and AFM images from samples transferred at different surface pressures. The hybrid particles display a complex behavior at the interface, and we could distinguish three distinct phases with varying interparticle spacings at different compression. The transfer process presented enables the decoration of topologically structured substrates with gold nanoparticle arrays, and the order of the initial monolayers is retained in the arrays of inorganic gold nanoparticles. The change in monolayer morphology upon compression can therefore be used to tailor the interparticle distance between approximately 650 and 300 nm without exchanging the colloids. More sophisticated gold nanostructures can be patterned into symmetric arrays using a similar protocol, which we demonstrate for nanostars and nanorods.     

Spectroscopic studies of the stability of monolayers of 2-docosylamino-5-nitropyridine at the air/water interface

Monolayers of 2-docosylamino-5-nitropyridine (DCANP) at the air/water interface were investigated by UV/Vis spectroscopy. The combination of this method with the classic constant-area relaxation technique yields insight into the longtime stability and the collapse behavior of monolayers. We have demonstrated that monolayers of DCANP are certainly stable under standard deposition conditions. At surface pressures above 20 mN/m monolayer instabilities lead to the formation of a three-dimensional head-to-head multilayered structure.     

Nystatin in Langmuir monolayers at the air/water interface

The paper presents a thorough characteristics of Langmuir monolayers formed at the air/water interface by a polyene macrolide antibiotic-nystatin. The investigations are based on the analysis of pi/A isotherms recorded for monolayers formed by this antibiotic at different experimental conditions. A significant part of this work is devoted to the stability and relaxation phenomena. It has been found that nystatin forms at the air/water interface monolayers of the LE state. A plateau region, observed during the course of the isotherm compression, is suggested to be due to the orientational change of nystatin molecules from horizontal to vertical position. Quantitative analysis of the desorption of the monolayer material into bulk water indicates that the solubility of nystatin monolayers increases with surface pressure. At low surface pressures, the desorption of nystatin from a monolayer is controlled both by dissolution and by diffusion. However, at the plateau and in the post-plateau region, the desorption does not achieve a steady state and the monolayer is less stable than in the pre-plateau region. However, the presence of membrane lipids, even at a low mole fraction, considerably increases the stability of nystatin monolayers. This enables the application of the Langmuir monolayer technique to study nystatin in mixture with cellular membrane components, aiming at verifying its mode of action and the mechanism of toxicity.     

Structural and topographical characteristics of dipalmitoyl phosphatidic acid in Langmuir monolayers

Dipalmitoyl phosphatidic acid (DPPA) monolayers at the air-water interface were studied from surface pressure (Pi)-area (A) isotherms and at the microscopic level with Brewster angle microscopy (BAM) under different conditions of temperature, pH, and ionic strength. BAM images were recorded simultaneously with Pi-A isotherms during the monolayer compression-expansion cycles. DPPA monolayers show a structural polymorphism from the liquid-expanded (LE)-liquid-condensed (LC) transition region at lower surface pressures toward liquid-condensed and solid (S) structures at higher surface pressures. An increase in temperature, pH, or ionic strength provokes an expansion in the monolayer structure. The results obtained from the Pi-A measurements are confirmed by the monolayer topography and relative reflectivity. The measurements of relative reflectivity upon monolayer compression showed an increase in relative monolayer thickness of 1.25 and 3.3 times throughout the full monolayer compression from the liquid-expanded to the liquid-condensed and solid states, respectively.     

Small solid particles and liquid lenses at fluid/fluid interfaces

The behaviour of small solid particles and liquid droplets at fluid interfaces is of wide interest, in part because of the roles they play in the stability of foams and emulsions. Here we focus on solid particles at liquid interfaces, both singly and in highly structured monolayers. We briefly mention small oil lenses on water in connection with the determination of line tension, τ. Particles are surface-active in the sense that they often adhere quite strongly to liquid surfaces, although of course they are not usually amphiphilic. The three-phase contact line around a particle at an interface is associated with an excess free energy resulting in a tendency of the line to contract (positive τ, which is a 1D analogue of surface tension) or to expand (negative τ). Positive line tension acts so as to push the contact angle of a particle with the fluid interface further away from 90°, i.e. to force the particle towards the more “wetting” of the two bulk phases. It also leads to activation barriers to entry and departure of particles from an interface. The behaviour of particle monolayers at octane/water interfaces is also discussed . It is found that, for monodisperse spherical polystyrene particles containing ionisable sulphate groups at the surface, highly ordered monolayers are formed. This appears to result from very long range electrostatic repulsion mediated through the oil phase. Surface pressure–surface area isotherms are discussed for particle monolayers and it is shown, using light microscopy, that at monolayer “collapse” particles are not expelled from the monolayers but rather the monolayer folds, remaining intact. This has an important bearing on methods, involving the use of the Langmuir trough, for the experimental determination of contact angles and line tensions in particulate systems. Received: 18 July 1999/Accepted: 30 August 1999     

Monolayers of mono- and bidisperse spherical polymer particles at the air/water interface and Langmuir-Blodgett layers on solid substrates

Monodisperse spherical polymer particles with anionic and cationic shells were studied for their monolayer formation and compression behaviour on an aqueous subphase as a function of pH and salt (KCl) concentration. In addition, monolayers of monodisperse and bidisperse mixtures of 434 and 214 nm sized anionic particles were studied for their morphology by scanning electron microscopy (SEM). The anionic particles were prepared by soap-free emulsion polymerization of styrene and acrylic acid, and the cationic particles from styrene and 2-acryloxyethyl trimethylammonium chloride. Independent of the chemical nature of the shell, the particles formed monolayers at high salt or acid concentration in the subphase. However, at neutral pH and if no salt was present in the subphase only a part of the spheres formed monolayers, while the residual particles disappeared into the subphase. The origin of this behaviour is discussed in terms of ionization and electrostatic shielding of the polar groups.Compressed monolayers of monodisperse particles consisted of randomly oriented domains of up to 20 particles with small holes in between, the holes not exceeding two particle diameters in size. Films of bidisperse mixtures were highly disordered. If small particles were present in excess, they formed a fairly disordered monolayer and the large particles were situated on top or below this layer. If the number ratio of both sorts of particles approached unity, the texture became disordered and bi- and multilayered aggregates were observed.     

Hydrolysis and Condensation of Alkyltrimethoxysilanes in Monomolecular Films

Hydrolysis and condensation of monomolecular alkyloxysilane films by the Langmuir technique is presented. Octadecyltrimethoxysilane formed monolayers on aqueous subphases with different properties depending on the bulk pH. At pH 1 a solid condensed film was directly formed with a molecular area of 23 Ų and a surface pressure/surface area variation similar to that on non-ionized stearic acid. At pH 5.6 and 11 several phase transitions were observed during the compression of the monolayer with a final collapse at a molecular area of 20 Ų. Relaxation measurements confirmed the stability of the films for longer than 12 hours at different surface pressures below a critical value.     

Effect of molecular surface packing on the enzymatic activity modulation of an anchored protein on phospholipid Langmuir monolayers

The catalytic activity of a glycosylphosphatidylinositol (GPI)-anchored alkaline phosphatase has been studied in Langmuir phospholipid monolayers at different surface pressures. The enzyme substrate, p-nitrophenyl phosphate, was injected into the subphase of mixed enzyme/lipid Langmuir monolayers. Its hydrolysis product was followed by monitoring the absorbance at 410 nm in situ in the monolayer subphase of the Langmuir trough. Several surface pressures, corresponding to different molecular surface densities, were attained by lateral compression of the monolayers. The morphology of the monolayers, observed by fluorescence microscopy, showed three different types of domains owing to the heterogeneous partition of the enzyme within the mixed enzyme/lipid film. The catalytic activity was modulated by the enzyme surface density, and it increased until a pressure of 18 mN/m was reached, but it decreased significantly when the equilibrium in-plane elasticity (surface compressional modulus) increased more noticeably, resulting in alterations in the interface morphology. A model for the modulation of the enzyme orientation and catalytic activity by lipid/enzyme surface morphology and enzyme surface packing at the air/liquid interface is proposed. The results might have an important impact on the comprehension of the enzymatic activity regulation of GPI-anchored proteins in biomembranes.     

Phage Langmuir monolayers and Langmuir–Blodgett films

Stable, insoluble Langmuir monolayer films composed of Staphylococcus aureus-specific lytic bacteriophage were formed at an air–water interface and characterized. The phage monolayer was very strong, withstanding a surface pressure of ～40 mN/m at 20 °C. The surface pressure–area (Π–A) isotherm possessed a shoulder at ～7 × 10⁴ nm²/phage particle, attributed to a change in phage orientation at the air–water interface from horizontal to vertical capsid-down/tail-up orientation as surface pressure was increased. The Π–A-dependence was accurately described using the Volmer equation of state, assuming horizontal orientation to an air–water interface at low surface pressures with an excluded area per phage particle of 4.6 × 10⁴ nm². At high pressures phage particles followed the space-filling densely packed disks model with a specific area of 8.5 × 10³ nm²/phage particle. Lytic phage monolayers were transferred onto gold-coated silica substrates from the air–water interface at a constant surface pressure of 18 mN/m by Langmuir–Blodgett method, then dried and analyzed by scanning electron microscopy (SEM) and ellipsometry. Phage specific adsorption (Γ) in Langmuir–Blodgett (LB) films measured by SEM was consistent with that calculated independently from Π–A isotherms at the transfer surface pressure of 18 mN/m (Γ = 23 phage particles/μm²). The 50 nm-thickness of phage monolayer measured by ellipsometer agreed well with the horizontal phage average size estimated by SEM. Surface properties of phage Langmuir monolayer compare well with other monolayers formed from nano- and micro-particles at the air–water interface and similar to that of classic amphiphiles 1,2-diphytanoyl-sn-glycero-3-phosphocholine (phospholipid) and stearic acid.     

Two applications of metal cyanide square grid monolayers: studies of evolving magnetic properties in layered films and templating Prussian blue family thin films

Two applications of previously described square grid network monolayers prepared at the air/water interface are explored. The monolayer networks are single layers of Prussian blue like mixed-metal cyanide networks that are formed via the interface-directed condensation of amphiphilic pentacyanometallate complex and subphase metal ions. In the first application, the monolayers are deposited onto solid supports and the magnetic properties of the networks are evaluated, as the transferred films evolve from a monolayer to a bilayer to multilayers. In the second application, the network monolayers are used to derivatize a surface, providing a seed layer for the subsequent deposition of solid-state metal cyanide molecule-based magnets. Improved surface wetting results in continuous, transparent magnetic films.     

On the interaction of dipalmitoyl phosphatidylcholine with normal long-chain alcohols in a mixed monolayer: a thermodynamic study

This study investigated the mixed monolayer behavior of dipalmitoyl phosphatidylcholine (DPPC) with normal long-chain alcohols at the air/water interface. Surface pressure–area isotherms of mixed DPPC/C₁₈OH and DPPC/C₂₀OH monolayers at 37°C were obtained and compared with previous results for the mixed DPPC/C₁₆OH system. The negative deviations from additivity of the areas and the variation of the collapse pressure with composition imply that DPPC and long-chain alcohols were miscible and formed non-ideal monolayers at the interface. At lower surface pressures, it seems that the attractive intermolecular force was dominant in molecular packing in the mixed monolayers. At higher surface pressures, the data suggest that the molecular packing in mixed DPPC/C₁₆OH monolayers may be favored by the packing efficiency or geometric accommodation. Furthermore, negative values of excess free energy of mixing were obtained and became significant as the hydrocarbon chain length of alcohols increased, which indicates there were attractive interactions between DPPC and long-chain alcohols. In each free energy of mixing–composition curve, there was only one minimum and thus a phase separation did not exist for mixed DPPC/long-chain alcohol monolayers.     

Langmuir-Blodgett-Kuhn and self-assembled films of asymmetrically substituted poly(paraphenylene)

Asymmetrically substituted poly(paraphenylene) (PhPPP) with hydrophilic and hydrophobic side chains was investigated. The polymer behavior at the air-water interface was studied on the basis of surface pressure-area (pi-A) isotherms and compression/expansion hysteresis measurements. PhPPP can form stable monolayers with an area per repeat unit of A=0.20+/-0.02 nm2 and a collapse pressure in the range of pi=25 mN/m. Then, Langmuir-Blodgett-Kuhn (LBK) films of PhPPP were prepared by horizontally and vertically transferring the Langmuir monolayers onto hydrophilic solid substrates at pi=12 mN/m. Cross-section analysis of the AFM tapping-mode topography images of a single transferred monolayer reveals a thickness of d0=0.9+/-0.1 nm. Taking into account the obtained monolayer thickness, curve-fitting calculations of angular scan data of LB monolayers measured using surface plasmon resonance (SPR) spectroscopy lead to a value for the refractive index of n=1.78+/-0.02 at lambda=632.8 nm. Next, the spontaneous formation of a PhPPP monolayer by adsorption from solution was studied ex situ by atomic force microscopy and UV-vis spectroscopy and in situ by using SPR spectroscopy. Stable self-assembled monolayers of PhPPP can be formed on hydrophilic surfaces with a thickness similar to that of the monolayer obtained using the LB method. The characterization results confirmed the amphiphilic character and the self-assembly properties of PhPPP, as well as the possibility of preparing homogeneous monolayer and multilayer films.     

Polyreactions in ordered systems: Polymerization of octadecyl methacrylate in monolayers at the gas–water interface

The ultraviolet-initiated polymerization of octadecyl methacrylate (ODMA, octadecyl 2-methyl-2-propenoate) as a monomolecular layer at the gas-water interface was studied. The polymerization was carried out at 27°C at the nitrogen-water interface; air inhibits the polymerization. At 27°C the ODMA monolayer exhibits three different states which were characterized by surface pressure-area diagrams and by surface potential measurements. The ODMA monolayer was polymerized under constant surface pressure in the range between 0 and 10 dyne/cm. The polymerization was followed by recording the contraction of the film. The conversion was determined by comparison of the area per monomer unit during polymerization with the area of mixed monolayers formed from ODMA and poly-ODMA as well as by infrared spectroscopy. The polymerization in the condensed state of the monolayer (at high surface pressure) is considerably faster than in the expanded state (at low surface pressure). As the polymer has a condensing effect on the monomer in the mixed monolayer, autocatalysis is suggested at low surface pressures. The resulting polymer was studied by x-ray diffraction. The structure of the freshly collapsed film is determined by the conformation of the polymer at the interface; the data after crystallizing the same sample from the melt point to higher tacticity of the poly-ODMA prepared in monolayers than that of poly-ODMA prepared by normal radical polymerization in solution.     

Structural and topographical characteristics of adsorbed WPI and monoglyceride mixed monolayers at the air-water interface

In this work we have analyzed the structural and topographical characteristics of mixed monolayers formed by an adsorbed whey protein isolate (WPI) and a spread monoglyceride monolayer (monopalmitin or monoolein) on the previously adsorbed protein film. Measurements of the surface pressure (pi)-area (A) isotherm were obtained at 20 degrees C and at pH 7 for protein-adsorbed films from water in a Wilhelmy-type film balance. Since the surface concentration (1/A) is actually unknown for the adsorbed monolayer, the values were derived by assuming that the A values for adsorbed and spread monolayers were equal at the collapse point of the mixed film. The pi-A isotherm deduced for adsorbed WPI monolayer in this work is practically the same as that obtained directly by spreading. For WPI-monoglyceride mixed films, the pi-A isotherms for adsorbed and spread monolayers at pi higher than the equilibrium surface pressure of WPI are practically coincident, a phenomenon which may be attributed to the protein displacement by the monoglyceride from the interface. At lower surface pressures, WPI and monoglyceride coexist at the interface and the adsorbed and spread pi-A isotherms (i.e., the monolayer structure of the mixed films) are different. Monopalmitin has a higher capacity than monoolein for the displacement of protein from the air-water interface. However, some degree of interactions exists between proteins and monoglycerides and these interactions are higher for adsorbed than for spread films. The topography of the monolayer corroborates these conclusions.     

Dynamic elasticity of films formed by poly(<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide) microparticles on a water surface

Surface dilatational dynamic elasticity ε of films formed by cross-linked poly(N-isopropylacrylamide) microparticles on a water/air interface has been determined as a function of polymer surface concentration Γ. The experimental dependences exhibit two maxima of ε at surface pressures π of nearly 6 and 35 mN/m. In the region of the second maximum, the pattern of the dependence is governed by a method used to vary Γ. At π > 25 mN/m, film compression leads to the formation of a metastable monolayer, while the gradual addition of a microparticle dispersion results in the establishment of equilibrium between the monolayer and surface aggregates. In the region of π values corresponding to the second maximum of ε, slow relaxation processes with a characteristic time substantially longer than 10 s occur in the system. At π > 35 mN/m, the film collapses due to the displacement of microgel particles from the water surface.     

Micellization of PEO/PS block copolymers at the air/water interface: a simple model for predicting the size and aggregation number of circular surface micelles

Isotherms of monolayers of poly(ethylene oxide) (PEO) and polystyrene (PS) triblock copolymers spread at the air/water interface were obtained by film balance technique. In a low concentration regime, the PEO segments surrounding the PS cores behave the same way as in monolayers of PEO homopolymers. Langmuir-Blodgett (LB) films prepared by transferring the monolayers onto mica at various surface pressures were analyzed by atomic force microscopy (AFM). The results reveal that these block copolymers form micelles at the air/water interface. Within the micelles, the PS blocks act as anchoring structures at the interface. In several cases, aggregation patterns were modified by the dewetting processes that occur in Langmuir-Blodgett films transferred to solid substrates. High transfer surface pressures and metastable states favored these changes in morphology. A flowerlike surface micelle model is proposed to explain the organization of the surface circular micelles. The model can be generalized and applied to diblock copolymers as well. The model permits prediction of the aggregation number and the size of circular surface micelles formed by PEO/PS block copolymers at the air/water interface.     

Effect of the conditions of transfer on the structure and optical properties of Langmuir graphene oxide films during deposition on a substrate

The effect the solvent and transfer pressure of graphene oxide (SLGO) Langmuir–Blodgett films on the physicochemical properties of monolayers, and on their structural and optical properties, is studied. Examination of the physicochemical properties of SLGO monolayers on subphase surfaces that are formed from SLGO dispersions in different organic solvents reveals that monolayer behavior is virtually independent of the solvent. Electron microscope and optical studies show that the monolayers formed from SLGO dispersions in DMF and acetone have the highest transfer coefficients. It is concluded that the structural heterogeneity of the surfaces of graphene oxide films results from simultaneous effect of electrostatic interactions between graphene oxide particles and Van der Waals interactions with the solvation shell of the particles. Studies focusing on the effect the pressure of transferring a graphene oxide monolayer onto the surface of a solid substrate has on structural features of LB films show that films produced at low surface pressures have more homogeneous structures.     

Molecular reorganization of paired assemblies of T-shaped rod-coil amphiphilic molecule at the air-water interface

A T-shaped aromatic amphiphilic molecule based on linear oligo(ethylene oxide) was synthesized. We suggest that its peculiar interfacial behavior at the air-water interface and the structure of the Langmuir-Blodgett monolayer are associated with its peculiar T-shape and competing steric and amphiphilic interactions at different surface pressures. At low surface pressure, uniform and smooth monolayers were formed. Upon compression, the molecular reorganization from spherical to cylindrical transformation occurred, as caused by the submerging of the oligo(ethylene oxide) chains, providing for efficient pi-pi interactions of the central core. At the highest surface pressure, the monolayer collapses into bilayer domains, following a bicontinuous network formation which tends to transform into a perforated film. The unique shape of T-like rigid aromatic cores makes their structural reorganization very peculiar with paired, dimerlike molecular packing dominating in gas and solid states. This paired aggregation is so strong that it is preserved in the course of flipping and formation of vertically oriented backbones.     

Structural and shear characteristics of adsorbed sodium caseinate and monoglyceride mixed monolayers at the air-water interface

The structural and shear characteristics of mixed monolayers formed by an adsorbed Na-caseinate film and a spread monoglyceride (monopalmitin or monoolein) on the previously adsorbed protein film have been analyzed. Measurements of the surface pressure (pi)-area (A) isotherm and surface shear viscosity (eta(s)) were obtained at 20 degrees C and at pH 7 in a modified Wilhelmy-type film balance. The structural and shear characteristics of the mixed films depend on the surface pressure and on the composition of the mixed film. At surface pressures lower than the equilibrium surface pressure of Na-caseinate (at pipi(e)(CS) have important repercussions on the shear characteristics of the mixed films.     

超分子聚合物刷PVP-Chol表面图案化及其力诱导的可逆结构转变

傅里叶变换红外（FT-IR）光谱、表面压力-分子面积（π-A）等温线和原子力显微镜（AFM）结果表明,聚乙烯吡咯烷酮（PVP）与胆固醇分子（Chol）在溶液中和气/液界面上可通过氢键作用形成刷状的超分子聚合物PVP-Chol。当表面压力低于2.5 m N·m^-1时,界面膜主要由富含胆固醇的微区与PVP-Chol纳米纤维构成的微区共存。在相对较低的表面压力下（ < 2.5 m N·m^-1）,PVP-Chol微区形貌随界面膜压缩发生有序的变化：从最初的无规结构逐渐变为月牙形、心形和圆形结构;表面压超过2.5 m N·m^-1后,圆形的PVP-Chol微区最终消失并转变为少量的纤维聚集体结构。值得注意的是,在1.0 m N·m^-1之前,PVP-Chol纳米纤维高度随AFM成像过程中压电陶瓷外加电压的变化在1.8到4.3 nm之间出现了可逆转变,表明扫描探针针尖与样品之间的作用力可诱导超分子聚合物刷PVP-Chol发生从圆柱状到椭柱状的可逆结构转变。