Determination of molecular parameters from polymer solutions in shear flow

A light scattering photometer with a double cylinder shear cell has been developed which allows detection not only in one plane as usual, but in a half-spherical range around the scattering volume. The anisotropic scattering behavior of oriented and deformed polymer molecules in dilute solution was investigated. All measurements were performed on polystyrene in several viscous solvents. From measurements in the plane of flow the average orientation angle was determined. By variation of detector position and wavelength of the primary beam, the determination of all three axes of the molecular gyration space of polymer coils was possible. Compared to predictions of the well-known dynamic theories by Kuhn, Rouse and Zimm, corresponding orientation data were found while the molecular deformation ratio shows much lower values than expected.     

Measuring the size of polymers with negative radii using MALS/QELS: an exploration of the thermodynamic radius

The concept of 'size' in polymer science can have several interpretations, including definitions that rely on either statistical or equivalent-hard-sphere measures of the spatial extent of macromolecules in solution. A definition such as that of the equivalent thermodynamic radius (R(T)), which relies on the second virial coefficient of the polymer solution, offers the possibility of a zero or even a negative size parameter for macromolecules, depending on whether the polymer solution is in a theta or poor thermodynamic state, respectively. Here, we present the results of multi-angle light scattering measurements of R(T) for polystyrene and poly(methyl methacrylate), showing positive, negative, and zero values for this radius, depending on dilute solution thermodynamics. These results are augmented with measurements of the hydrodynamic radius, using quasi-elastic light scattering, and with random-walk-based calculations of the root-mean-square and viscometric radii. Re-examination of the literature provides additional examples of negative radii of polymers and oligomers.     

Properties of cellulose acetate in solution. II. Light scattering and elasticity measurements on gels in benzyl alcohol

Kinetic studies are reported for the light scattering and elasticity of thermally reversible gels of cellulose acetate in benzyl alcohol over a range of temperature and polymer concentration. The small-angle light scattering data are found to be described by exponential correlation functions, and it is concluded that the scattering has its origin in the nonrandom character of the crosslinking in the gels studied. The elasticity is discussed in terms of the density of crosslinks in the gels. Thus, the kinetics studied by light scattering and elasticity measurements are independently related to temperature and polymer concentration.     

Morphology of a liquid-crystalline polyester film

Morphological studies are reported for a thermotropic liquid crystalline polyester. Small angle light scattering studies were carried out as a function of temperature using H_v and V_v polarization with photographic as well as photometric techniques. No scattering was observed from a thin film cast from a dilute solution of the polymer in a highly volatile solvent. When the film was heated, scattering of light was observed above the glass transition temperature of the polyester. The scattering was found to be azimuthally dependent with V_v intensities being much higher than the corresponding H_v intensities. The size of the morphological features responsible for SALS patterns were calculated and were found not to change significantly with temperature ranging from glass transition temperature to the solid-nematic transition temperature of the polyester. The WAXS pattern of solution cast polymer was representative of an amorphous structure. Solution cast films heat treated under various conditions (all above the T_g of the polymer) contained crystalline as well as amorphous structures. The maximum apparent crystallinity for annealed samples was of the order of 30%.     

Adsorption of block polyampholyte micelles in monolayers at the silicon water interface

 The adsorption of the diblock polyampholyte poly (methacrylic acid)-block-poly((dimethylamino)ethyl methacrylate) from aqueous solution on silicon substrates was investigated as a function of polymer concentration and pH. Dynamic light scattering and electrokinetic measurements were used to characterize the polyampholyte in solution. The amount of polymer adsorbed was determined by ellipsometry and lateral structures of the polymer layer were investigated by scanning force microscopy. The amount of polymer adsorbed was found to be strongly influenced by the pH of the polymer solution, while the size of the polyampholyte micelles adsorbed on the surface was hardly affected by pH during adsorption. From investigations by scanning force microscopy well-seperated micelles were seen in the dried monolayers adsorbed directly from solution. The structures at the surface are correlated to structures in solution, and the adsorbed amount depends on the relative charge of the micelles and the surface. Received: 13 September 1999 Accepted in revised form: 8 December 1999     

Effect of mixed solvent on solution properties and gelation behavior of poly(vinyl alcohol)

In this work, the static and dynamic light scattering measurements were used to investigate the solution properties and the aging effects on PVA/DMSO/water ternary system in dilute region at 25 °C. It was found that the phase separation and aggregate behavior occurs rapidly and obviously when DMSO mole fraction (X₁) in the solvent mixture is between 0.2 and 0.33, especially at 0.25. In this solvent composition range, a broad peak which indicates phase separation and chain aggregation can be observed from static light scattering measurement. However, when DMSO mole fraction is increased to 0.37, no such peak is present. For this ternary system, the gelation mechanism and the relationship between the phase separation behavior and the gelation of the formed physical gels were also investigated through the gelation kinetic analyses in the dilute and semi-dilute region. It is concluded that the cononsolvency effect in the dilute solution is not the sole origin that affects the phase separation, aggregation, and gelation behavior for the ternary system in a higher polymer concentration range. The hydrodynamic factors such as the higher viscosity and slower polymer chain diffusion that are resulted from higher polymer concentration should be also considered.     

Interactions of quaternary ammonium salt-type gemini surfactants with sodium poly(styrene sulfonate)

The interactions of cationic gemini surfactants, 1,2-bis(alkyldimethylammonio)ethane dibromide (m-2-m: m is hydrocarbon chain length, m = 10 and 12), and an anionic polymer, sodium poly(styrene sulfonate) (PSS), have been characterized by several techniques such as tensiometry, fluorescence spectroscopy, and dynamic light scattering. The surface tension of gemini surfactant/PSS mixed systems decreases with surfactant concentration, reaching break points, which are taken as critical aggregation concentrations (cac). The surface tension at the cac of mixtures is higher than that of single surfactants, and it is found that at concentrations above the cac, the surfactant molecules are associated with the polymer in the bulk. The 12-2-12/PSS mixed system shows higher surface activity than both 10-2-10/PSS and the monomeric surfactant of dodecyltrimethylammonium bromide/PSS systems. Fluorescence measurements of these mixed systems suggest the formation of a complex with a highly hydrophobic environment in the bulk of the solution. Additionally, dynamic light scattering measurements show that the hydrodynamic diameter of the 12-2-12/PSS mixed system is smaller than that of PSS only at low concentration, indicating interactions between surfactant and polymer. These result from the electrostatic attraction between ammonium and sulfate headgroups as well as the hydrophobic interaction between their hydrocarbon chains.     

Solution properties of dendronized poly(hydroxy ethyl methacrylate) polymers

Four generations of dendronized polymers with a methacrylate backbone and hydroxy‐functionalized aliphatic polyester dendrons based on 2,2‐bis(methylol)propionic acid were studied in solutions by rheological measurements, dynamic light scattering, turbidimetry, and ¹H NMR self‐diffusion measurements to reveal the effect of increasing hydrophilicity and molecular size on their solution properties. The studied polymers were interesting new amphiphiles with a hydrophobic main chain and a hydrophilic shell. Evidence of aggregation upon the heating of the first‐generation polymer in an aqueous solution was obtained by dynamic light scattering and turbidimetry, reflecting the effect of the hydrophobic polymer backbone, whereas the higher generation polymers did not show aggregation upon heating. Although the dimensions of the polymers were observed to increase with increasing generation, all the polymers exhibited low viscosities and Newtonian flow behavior in both aqueous and dimethyl sulfoxide solutions. The relative viscosities of the polymers in water and dimethyl sulfoxide showed that the conformation of the polymers was somewhat more open in dimethyl sulfoxide, and this led to higher viscosities than those in water, in agreement with the ¹H NMR diffusion measurements, by which the dimensions were found to be larger for the polymers dissolved in dimethyl sulfoxide. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3674–3683, 2006     

Molecular motion in polymer networks and concentrated solutions from photon correlation spectroscopy

The dynamics of well-characterised polymer networks have been studied from Rayleigh light scattering linewidth measurements using photon correlation spectroscopy. The linewidth dependence on scattered wave-vector and on the degree of chemical cross-linking can be described by a model of whole molecule diffusion which is restricted by certain sites along it being cross-linked into the network. Linewidths of uncross-linked polymer solutions of similar concentrations have been found to be smaller by about a factor of two.     

Photocrosslinking of polymers containing cinnamoyl groups: The change in polymer coil dimension during the reaction in solution

Intra- and intermolecular photocrosslinking reactions of poly(2-cinnamoyloxyethyl methacrylate) (PCEMA) and copoly(CEMA/MMA) in dilute solution under u.v. light irradiation at 30°C were studied by u.v. absorption, light scattering, GPC and viscosity measurements. The contraction of polymer coils proceeds due to predominant intramolecular photodimerization in very dilute solution. When the polymer concentration increases, competition between intra- and intermolecular photodimerization is observed, and the volume of polymer coils increases gradually due to the increase in molecular weight caused by the intermolecular reaction overcoming the contraction caused by the intramolecular reaction. The contribution of intramolecular crosslinking is much more important in the presence of oxygen than in its absence, showing that the shorter lifetime of the excited singlet state makes intermolecular photodimerization difficult.     

Characteristics of several kinds of polyethylene gel estimated by small‐angle light scattering under cross polarization

Unusual phenomenon was confirmed in the gelation of polymer solution when branched low molecular weight polyethylene (B‐LMWPE) and ultrahigh molecular weight polyethylene (UHMWPE) solutions were quenched at their gelation temperature. That is, polarized light scattering (Hv scattering) from B‐LMWPE gels containing 95% solvent yielded a four‐leaf clover type as like the scattering from a perfect spherulite under Hv scattering but the corresponding polarized optical microscopy (POM) showed dark image showing no spherulite with Maltese cross color indicating considerable orientation fluctuation between the optical axes with respect to the radial axis of the spherulite. Hv scattering from pristine UHMWPE gels containing more than 99% solvent had an X‐type pattern, which became clearer with time. The corresponding POM images change from being dark, indicating no superstructure, to being slightly brighter, indicating the presence of indistinct superstructures. To analyze this unusual phenomenon of Hv scattering from B‐LMWPE and UHMWPE gels, new models were proposed using a statistical approach and optically anisotropic elements in three‐dimensional space. The theoretical patterns were in agreement with observation. Thus, it came to a conclusion that Hv scattering from the gels is attributed to strong distance correlation between polar and rotational angles of two optically anisotropic elements in the polymer‐rich phase. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Structural properties of thermoresponsive poly(N-isopropylacrylamide)-poly(ethyleneglycol) microgels

We present investigations of the structural properties of thermoresponsive poly(N-isopropylacrylamide) (PNiPAM) microgels dispersed in an aqueous solvent. In this particular work poly(ethyleneglycol) (PEG) units flanked with acrylate groups are employed as cross-linkers, providing an architecture designed to resist protein fouling. Dynamic light scattering (DLS), static light scattering (SLS), and small angle neutron scattering (SANS) are employed to study the microgels as a function of temperature over the range 10 °C ≤ T ≤ 40 °C. DLS and SLS measurements are simultaneously performed and, respectively, allow determination of the particle hydrodynamic radius, R(h), and radius of gyration, R(g), at each temperature. The thermal variation of these magnitudes reveals the microgel deswelling at the PNiPAM lower critical solution temperature (LCST). However, the hydrodynamic radius displays a second transition to larger radii at temperatures T ≤ 20 °C. This feature is atypical in standard PNiPAM microgels and suggests a structural reconfiguration within the polymer network at those temperatures. To better understand this behavior we perform neutron scattering measurements at different temperatures. In striking contrast to the scattering profile of soft sphere microgels, the SANS profiles for T ≤ LCST of our PNiPAM-PEG suspensions indicate that the particles exhibit structural properties characteristic of star polymer configurations. The star polymer radius of gyration and correlation length gradually decrease with increasing temperature despite maintenance of the star polymer configuration. At temperatures above the LCST, the scattered SANS intensity is typical of soft sphere systems.     

Mutual macromolecular crowding as the basis for polymer solution non‐ideality

Semidilute polymer solutions differ greatly from dilute solutions in properties such as viscosity, relaxation time, elastic modulus, colloid osmotic pressure, and light scattering. Previously, Matsuoka and Cowman proposed a single semiempirical expression for the nonideality contribution due to the concentration and intrinsic viscosity dependence, which has no other adjustable parameters, but quantitatively fits data for flexible, semiflexible, and rigid polymers in good solvents. In this report, the excluded volume theory as proposed by Ogston and Laurent is generalized to include mutual crowding between identical polymers based on hydrodynamic volumes, and applied to derive the expression for the nonideality contribution to specific viscosity, colloid osmotic pressure, and light scattering. Additionally, consideration of the contribution of mutual macromolecular crowding to the effective solvent viscosity allows prediction of polymer relaxation time and elastic modulus in semidilute solutions. This theoretical approach now allows the prediction of semidilute polymer solution properties based only on concentration and intrinsic viscosity, and conversely allows intrinsic viscosity (and thus average molecular weight) to be calculated from measurements made on semidilute solutions of known concentration. Copyright © 2016 John Wiley & Sons, Ltd.     

Photophysical and viscometric properties of naphthalene-labeled acrylamide/N,N-dimethyl maleimido propyl ammonium propane sulfonate copolymer

 The synthesis, viscometric, and fluorescence properties of a water-soluble zwitterionic sulfobetaine copolymer, poly(ADMMAPS)/NA, are reported. When fluorescent hydrophobes (naphthyl group) are incorporated into the zwitterionic copolymer, the photophysical response may effectively probe solution behavior on the microscopic level. Experimental results indicate that I _E/I _M steadily increases with increases in polymer concentration. I _E/I _M in aqueous solution is greater than that in aqueous potassium chloride solution. Dynamic light scattering (QELS) measurements show that hydrodynamic diameters of the naphthalene-labeled zwitterionic sulfobetaine copolymer increase with an increasing salt concentration. Viscosity studies reveal that the polymer coil expanded as more salt is added. In fluorescence quenching study, the reduction in the quenching efficiency of Tl⁺ with salt addition can arise from enhanced compartmentalization of naphthalene labels as added electrolyte enhances intrapolymer micellization. The intrapolymer micelle is easily formed, indicating that the thallium ion has difficulty reacting with bound naphthalenes located in the polymer coil. The naphthalene-labeled zwitterionic sulfobetaine copolymer is depicted as a compacted polymer coil conformation in deionized water because of intra-and inter-associations. Consequently, salt addition breaks up the associations and enhances the intrapolymer micellization. The microscopic and macroscopic behaviors of zwitterionic sulfobetaine copolymer differ a lot from those of the corresponding cationic copolymer. Received: 4 February 1997 Accepted: 1 May 1997     

Multivariable structural characterization of semicrystalline polymer blends by small‐angle light scattering

A new multi‐variable‐measurement approach for characterizing and correlating the nanoscale and microscale morphology of crystal‐amorphous polymer blends with melt‐phase behavior is described. A vertical small‐angle light scattering (SALS) instrument optimized for examining the scattering and light transmitted from structures ranging from 0.5 to 50 μm, thereby spanning the size range characteristic of the initial‐to‐late stages of thermal‐phase transitions (e.g., melt‐phase separation and crystallization) in crystal‐amorphous polymer blends, was constructed. The SALS instrument was interfaced with differential scanning calorimetry (DSC), and simultaneous SALS/DSC/transmission measurements were performed. We show that the measurement of transmitted light and SALS under H_V (cross‐polarized) optical alignments during melting can be used to reliably measure the thermodynamic (e.g., crystal melting and melt‐phase separation temperatures) and structural variables (e.g., crystalline fraction within the superstructures and volume fraction of superstructures) necessary for describing the multiphase behavior of crystal‐amorphous blends in one combined measurement. We also evaluate the orientation correlations of crystalline volume elements within the superstructures. Our results indicate that simultaneous measurement of transmitted light can provide a reliable estimate of the total scattering from density and orientation fluctuations and the melt‐phase separation temperature of polymer blends. For solution‐cast poly(?‐caprolactone)/poly(D,L‐lactic acid) blends, our multivariable measurements during melting provide the parameters necessary to generate a crystal–liquid and liquid–liquid phase diagram and characterize the solid‐state morphology. This opens up the challenge to explore use of our vertical SALS instrument as a rapid and convenient method for developing structure–property relationships for crystal‐amorphous polymer blends. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2714–2727, 2002     

Structural and rheological properties of hydrophobically modified polysaccharide associative networks

The phase behavior of hydrophobically modified chitosans (HMCs) in aqueous solution has been investigated using scattering and rheology experiments. We observed four regions on the phase diagram of the associative polymer: (i) a supernatant phase (unimers phase) at low polymer concentration; (ii) a dilute solution of intermolecularly bridged flowerlike micelles at intermediate concentration; (iii) an associative gel phase at high polymer content; and (iv) a phase separation. In the present paper, we discuss the structural and dynamical properties of the HMC associative networks (c > c*) at a fixed hydrophobic degree of substitution of 2% and fixed alkyl side chains (stickers) length C8 (domains iii and iv of the phase diagram). As the polymer concentration is increasing, a connecting network is formed from the percolation of bridges between micellar aggregates. In this regime, small-angle neutron scattering and light scattering measurements show that -50-nm flower aggregates are acting like junction points in the network. The effect of the concentration, the stress, and the shear on the structure of the network is discussed. In particular, we observe bridge-to-loop transitions and then the formation of microgels or a low-connected network under shear. Therefore, our results are compared to recent theoretical models and to the results reported for telechelic systems.     

Matched ring diblock and linear triblock copolymers in dilute solution

A unique diblock copolymer ring and its linear triblock copolymer precursor composed of polystyrene and polydimethylsiloxane have been characterized by static and dynamic light scattering in dilute solution. The measurements were carried out with cyclohexane as the solvent over a temperature range of 12–35°C. Cyclohexane has the useful property that it is nearly isorefractive with the PDMS so that the PDMS block segments are invisible to the light-scattering technique and it is a theta solvent for polystyrene at 34.5°C. The block polymers in this work contain 35.1 wt % of styrene as determined by proton NMR. In the linear triblock polymer, the polystyrene is the center block with PDMS blocks on each side. Static light scattering measurements give 4.31 × 10⁴ for the average molecular weight of the whole polymer. Light scattering also shows that the apparent theta temperature for the linear triblock is shifted by 15°C to a value of 20°C at which point the second virial coefficient drops sharply and phase separation begins to induce aggregation. The diblock ring, however, shows a strongly positive second virial coefficient and no aggregation even at 12°C which is the limit of these experiments. The diffusion coefficients of cyclic diblock (D_c) and linear triblock copolymer (D₁) are measured by dynamic light scattering. The ratio of diffusion coefficients of cyclic and linear copolymers at 14.9°C and 30°C are D_c/D_l = 1.13 and 1.107 respectively. These compare well with prediction of 1.18 for this ratio from consideration of the hydrodynamics of matched linear and cyclic polymer chains. Dynamic light scattering quantitatively confirms that the linear copolymer experiences a solvent quality change near 20°C but the cyclic polymer remains in good solvent over the entire experimental temperature range. © 1993 John Wiley & Sons, Inc.     

部分水解聚丙烯酰胺柠檬酸铝体系临界交联浓度的研究

采用落球粘度计、核孔膜过滤、动态光散射 (DLS)和2 7Al NMR法 ,研究了高分子量、低浓度的部分水解聚丙烯酰胺 (HPAM)与柠檬酸铝 (AlCit)体系形成交联聚合物溶液 (LPS)的临界交联浓度 .研究结果表明 ,HPAM AlCit体系在聚合物浓度较低时 ,溶液中主要发生形成交联聚合物线团 (LPC)的交联反应 ,此时形成的是LPS ,聚合物浓度增加到某一临界值后 ,体系中形成线团后 ,存在线团间的交联 ,此时形成的是弱凝胶 .不同方法所测得的HPAM AlCit体系的临界交联浓度基本相同 ,对于粘均相对分子质量为 1 4× 10 7的HPAM ,在NaCl浓度为 2 0 0 0mg L ,交联比 2 0∶1时形成的交联体系 ,其临界交联浓度在 2 0 0～ 30 0mg L间 .     

Interaction of cylindrical polymer brushes in dilute and semi-dilute solution

We present a systematic study of flexible cylindrical brush-shaped macromolecules in a good solvent by small-angle neutron scattering (SANS), static light scattering (SLS), and by dynamic light scattering (DLS) in dilute and semi-dilute solution. The SLS and SANS data extrapolated to infinite dilution lead to the shape of the polymer that can be modeled in terms of a worm-like chain with a contour length of 380 nm and a persistence length of 17.5 nm. SANS data taken at higher polymer concentration were evaluated by using the polymer reference interaction site model (PRISM). We find that the persistence length reduce from 17.5 nm at infinite dilution to 5.3 nm at the highest concentration (volume fraction 0.038). This is comparable with the decrease of the persistence length in semi-dilute concentration predicted theoretically for polyelectrolytes. This finding reveals a softening of stiffness of the polymer brushes caused by their mutual interaction.