Miscibility and morphologies of poly(arylene ether phenyl phosphine oxide/sulfone) copolymer/vinyl ester resin mixtures and their cured networks

Nonreactive bisphenol A‐based poly(arylene ether triphenyl phosphine oxide/diphenyl sulfone) statistical copolymers and a poly(arylene ether triphenyl phosphine oxide) homopolymer, each having a number‐average molecular weight of about 20 kg/mol, were synthesized and solution‐blended with a commercial dimethacrylate vinyl ester resin. Free‐radical cured systems produced morphologies that were a function of both the amount of phosphonyl groups and the weight percentage of the copolymers. For example, highly hydrogen‐bonded poly(arylene ether phenyl phosphine oxide) homopolymer/vinyl ester resin mixtures were homogeneous in all proportions both before and after the formation of networks. Copolymers containing low amounts (≤30 mol %) of the phosphonyl groups displayed phase separation either before or during cure. The phase‐separated cured materials generally had phase‐inverted morphologies, such as a continuous thermoplastic copolymer phase and a particulate, discontinuous vinyl ester network phase, except for systems containing a very low copolymer content. The resin modified with a copolymer containing 30 mol % phosphine oxide comonomer showed improved fracture toughness, suggesting the importance of both phase separation and good adhesion between the thermoplastic polymer and the crosslinked vinyl ester filler phase. The results suggested that the copolymers with high amounts of phosphine oxide should be good candidates for interphase sizing materials between a vinyl ester matrix and high‐modulus carbon fibers for advanced composite systems. Copolymers with low amounts of phosphonyl groups can produce tough, vinyl ester‐reinforced plastics. The char yield increases with the concentration of bisphenol A poly(arylene ether phosphine oxide) content, suggesting enhanced fire resistance. The incorporation of thermoplastic copolymers sustains a high glass‐transition temperature but does not significantly affect the thermal degradation onset temperature. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2409–2421, 2000     

Synthesis of hydrolytically stable phosphorus-containing polymers via polycondensation and their utilization in polymer blends

Amorphous polyarylene ether homo- and copolymers were synthesized which were based upon bisphenol A and either 4, 4'-dichlorodiphenylsulfone, 4, 4'-difluorobenzophenone or 4, 4'-difluorodiphenyl phenylphosphine oxide. Solution blends were prepared from these homo- and copolymers with linear bisphenol A based polyhydroxyether, which was used as a model for the epoxy or vinyl ester thermosetting matrix resins for composite materials. It was observed that transparent, single Tg blends could be prepared from the phosphine oxide containing homopolymer and a 50/50 phosphine oxide/dichlorodiphenylsulfone copolymer. The other homopolymers produced materials with two Tg's, implying that they were definitely phase separated systems. Thermogravimetric analysis was also conducted and the phosphine oxide blends produced high char yields suggesting utilization in fire-resistant applications. The miscibility of the phosphine oxide material has been attributed to specific hydrogen bonding interactions observed between the phosphine oxide bond and the secondary hydroxyl group in the polyhydroxy ether. This hydroxyl functionality is also present in the epoxy and vinylester precursors and it is suggested that these materials could be utilized as interface sizings for carbon fibers, which would produce a graded microstructure between the fiber and the polymer matrix systems.     

含三苯基氧磷结构聚芳醚醚酮酮的合成与表征

以苯酚、对二溴苯及苯基磷酰二氯为原料合成出二(4-苯氧基苯基)苯基氧磷(BPOPPO)。 三氯化铝(AlCl₃)为催化剂,通过缩聚反应,BPOPPO与对苯二甲酰氯(TPC)反应制备出一种含有三苯基氧磷结构的聚醚醚酮酮(P-PEEKK)树脂。 采用傅里叶变换红外光谱仪(FT-IR)、差示扫描量热仪(DSC)、热重分析仪(TGA)和广角X射线衍射(WAXD)等技术手段对P-PEEKK树脂的结构和性能进行表征。 结果表明,P-PEEKK树脂属于非晶聚合物,玻璃化转变温度(T_g)较高,为190.5 ℃;热分解温度(T_5%)为515 ℃,耐热性能较好;极限氧指数(LOI)为42,阻燃性能好,为难燃材料;易溶解于氯仿、1,2-二氯乙烷、N,N-二甲基乙酰胺等有机溶剂中,溶解性能较好,便于涂膜加工;拉伸强度为62 MPa,力学性能较好。     

Synthesis and properties of phosphorus polyesters with systematically altered phosphorus environment

Monomers with phosphorus-containing substituents were incorporated into aromatic-aliphatic polyesters to develop polymeric halogen-free flame retardants as additives for poly(butylene terephthalate) (PBT). They were built into the polyester backbone of PBT substituting 1,4-butane diol as monomer by phosphorus-containing aromatic-aliphatic diols. Starting from 10-(2,5-bis(2-hydroxyethoxy)phenyl)-9,10-dihydro-9-oxa-10-phospha-phenanthrene-10-oxide (DOPO-HQ-GE), the chemical structure of the phosphorus monomers was systematically varied resulting in new polymers with diphenyl phosphine oxide substituents and bridged phosphine oxide units. The polymers were prepared by transesterification polycondensation in the melt in lab-scale as well as in a 2.4 l-autoclave. The properties of the polyesters were determined and compared to the DOPO-based polyester with respect to the achieved molar mass and polydispersity, solid state structure, glass transition temperature, thermal stability and combustion behavior.It was found that the different phosphorus substituents lead to different glass transition temperatures. The polymers containing bridged phosphorus structural units showed higher glass transition temperatures T_g and resulted in higher char yields after thermal decomposition. Both phosphine oxide structures showed only one-step decomposition with a shoulder at the end of the step. In contrast, two separate steps were observed in the polyesters with DOPO-substituents. The results indicated that the phosphorus polyesters under discussion are suitable to adjust the flame retarding mechanism.     

Calixarenes functionalized with phosphine oxide and diamide functions as extractants and ionofores for rare-earth metals

Calixarene-based ligands with phosphine oxide and diamide functions at wide and narrow rims are synthesized and studied as extracting agents for liquid extraction and ionophores for polymeric electrochemical ion sensors. Calixarene ligands are compared with corresponding phosphine oxide and diamide ligands which are not attached to the calixarene platform. Extraction and sensor properties of the ligands were studied in different metal ion solution with special attention paid to rare-earth metals. Attachment of phosphine oxide groups to the calixarene platform leads to the sharp increase of both extraction and sensing ability of the corresponding systems comparing to non-bonded phosphine oxide. In case of the diamide derivatives attached to the calixarene performance of corresponding ligands was similar to those of non-bonded diamides.     

Effect of Phosphorus Content on Thermal Behaviour of Diglycidyl Ether of Bisphenol-A/phosphorus Containing Amines

Curing of diglycidyl ether of bisphenol-A (DGEBA) with phosphorus containing amide amines i.e. bis[3(3’-aminobenzamido phenyl)]methyl phosphine oxide (MB),bis[3(4’-aminobenzamido phenyl)]methyl phosphine oxide (PB), tris[3(3’-aminobenzamidophenyl)] phosphine oxide (MT) and tris[3(4’-aminobenzamido phenyl)] phosphine oxide (PT)and conventionally used curing agent 4,4’-diaminodiphenyl sulfone (D) was studied by DSC. The amines MB, PB, MT and PT were synthesised in the laboratory and were characterized by determining elemental composition, melting point, and amine equivalent. Structural characterization was done by ¹H-NMR and FTIR. The onset temperature of curing depended on the nucleophilicity of the amines and was in the orderMT≈MB<PT<PB<D. The exothermic peak temperatures were in the orderD>PB>PT>MT≈MB. The char residue of cured epoxy resin was significantly higher when phosphorus was incorporated in the cured network. Using mixed amine formulations based on amine D and P-containing amines and the molar ratio of these amines could easily control the curing characteristics. A linear relationship between char yield and P-content was observed in such formulations. This revised version was published online in August 2006 with corrections to the Cover Date.     

Synthesis and characterization of arylene ether imide reactive oligomers and polymers containing diaryl alkyl phosphine oxide groups

The diamine monomer bis(m-aminophenyl) methyl phosphine oxide (DAMPO) was synthesized via nitration and reduction of diphenyl methyl phosphine oxide. Rigorous purification of this monomer enabled its utilization in the synthesis of high molecular weight poly(ether imide)s. Both thermoplastic materials and thermosetting systems, endcapped with either phthalic or phenylethynylphthalic anhydride, respectively, have been produced. Major emphasis has been placed on polyimides derived from 2,2′-bis(4-(3,4-dicarboxyphenoxy) phenyl) propane dian- hydride, also known as bisphenol-A dianhydride, or BPADA. High molecular weight homo- and copolyimides based on BPADA/DAMPO had glass transition temperature values in the range of 215–223°C, and were totally amorphous. They displayed higher modulus and tensile strength values than the polyetherimide control based on meta-phenylene diamine and also generated high TGA char yields in air. Phenylethynyl crosslinkable materials were effectively cured at 380°C to produce networks that are ductile, very solvent resistant and also generate high char yields, which suggest their possible utilization in fire resistant matrix systems. © 1998 John Wiley & Sons, Ltd.     

Markovnikov hydroformylation catalyzed by ROPAC in the presence of phosphine and phosphine oxide ligands

Rhodium-catalyzed hydroformylation of 1-octene in the presence of different phosphine and phosphine oxide ligands has been investigated. The molecular structure of new phosphine ligand, fluorenylidine methyl phenyl diphenylphosphine, was determined by single-crystal X-ray crystallography. Parameters such as different ligands, molar ratio of ligand to rhodium complex, ratio of olefin to rhodium complex, pressure of CO : H₂ mixture, and time of the reaction were studied. The linear aldehyde was the main product when the phosphine ligands were used as auxiliary ligands while the selectivity was changed to the branched products when the related phosphine oxide ligands were used. Under optimized reaction conditions, in the presence of [Rh(acac)(CO)(Ph₃P)]-di(1-naphthyl)phenyl phosphine oxide, conversion of 1-octene reached 97% with 87% selectivity of branched aldehyde.     

Synthesis and characterization of novel polyimide from bis‐(3‐aminophenyl)‐4‐(trifluoromethyl)phenyl phosphine oxide

A novel diamine, bis‐(3‐aminophenyl)‐4‐(trifluoromethyl)phenyl phosphine oxide (mDA3FPPO), containing phosphine oxide and fluorine moieties was prepared via the Grignard reaction from an intermediate, 4‐(trifluoromethyl)phenyl diphenyl phosphine oxide, that was synthesized from diphenylphosphinic chloride and 4‐(trifluoromethyl)bromobenzene, followed by nitration and reduction. The monomer was characterized by Fourier transform infrared (FTIR), ¹H NMR, ³¹P NMR, ¹⁹F NMR spectroscopies; elemental analysis; melting point measurements; and titration and was used to prepare polyimides with a number of dianhydrides such as pyromellitic dianhydride (PMDA), 5,5′‐[2,2,2‐trifluoro‐1‐(trifluoromethyl)ethyliden]‐bis‐1,3‐isobenzofuranedione (6FDA), 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride (BTDA), and 4,4′‐oxydiphthalic dianhydride (ODPA). Polyimides were synthesized via a conventional two‐step route; preparation of polyamic acids, followed by solution imidization, and the molecular weight were controlled to 20,000 g/mol. Resulting polyimides were characterized by FTIR, NMR, DSC, and intrinsic viscosity measurements. Refractive‐index, dielectric constant, and adhesive properties were also determined. The properties of polyimides were compared with those of polyimides prepared from 1,1‐bis‐(4‐aminophenyl)‐1‐phenyl‐2,2,2‐trifluoroethane (3FDAm) and bis‐(3‐aminophenyl) phenyl phosphine oxide (mDAPPO). The polyimides prepared from mDA3FPPO provided high glass‐transition temperatures (248–311 °C), good thermal stability, excellent solubility, low birefringence (0.0030–0.0036), low dielectric constants (2.9–3.1), and excellent adhesive properties with Cu foils (107 g/mm). © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3335–3347, 2001     

Structural and Thermal Characterisation of Nadimide Resins

A series of hexachloronadimides containing phosphine oxide in the backbone were synthesized by the reaction of bis(3-amino phenyl) methyl phosphine oxide (BAP) with pyromellitic dianhydride (PMDA)/3,3’,4,4’-benzophenone tetracarboxylic acid dianhydride (BTDA)/2,2-bis(3,4-dicarboxy phenyl) hexafluoropropane dianhydride (6F) and hexachloronadic anhydride in glacial acetic acid/acetone. Structural characterisation of the resins was carried out by infrared, nuclear magnetic resonance spectroscopy and elemental analysis. Thermal characterisation of uncured resin was done by differential scanning calorimetry and thermogravimetric analysis. The decomposition temperature of uncured resins were above 310±10°C with T _max 330±10°C in nitrogen atmosphere. Char yield at 800°C ranged from 37–42%. This revised version was published online in July 2006 with corrections to the Cover Date.     

Triphenyl phosphine oxide and carbazole-based polymer host materials for green phosphorescent organic light-emitting diodes

Four novel polymers, poly(3,6-9-decyl-carbazole-alt-1,3-benzene)(PB13CZ), poly(3,6-9-decyl-carbazole-altbis(4-phenyl)(phenyl) phosphine oxide)(PTPPO38CZ), poly(3,6-9-decyl-carbazole-alt-2,4-phenyl(diphenyl) phosphine oxide)(PTPPO13CZ) and poly(3,6-9-decyl-carbazole-alt-bis(3-phenyl)(phenyl) phosphine oxide)(PTTPO27CZ) were synthesized, and their thermal, photophysical properties and device applications were further investigated to correlate the chemical structures with the photoelectric performance of bipolar host materials for phosphorescent organic light emitting diodes. All of them show high thermal stability as revealed by their high glass transition temperatures and thermal decomposition temperatures at 5% weight loss. These polymers have wide band gaps and relatively high triplet energy levels. As a result, the spin coating method was used to prepare the green phosphorescent organic light emitting diodes with polymers PTPPO38 CZ, PTPPO13 CZ and PTTPO27 CZ as the typical host materials. The green device of polymer PTPPO38 CZ as host material shows electroluminescent performance with maximum current efficiency of 2.16 cd·A~(-1), maximum external quantum efficiency of 0.7%, maximum brightness of 1475 cd·m~(-2) and reduced efficiency roll-off of 7.14% at 600 cd·m~(-2), which are much better than those of the same devices hosted by polymers PTTPO27 CZ and PTPPO13 CZ.     

Polyimide-silver nanocomposite containing phosphine oxide moieties in the main chain: Synthesis and properties

<正>New flame-retardant polyimide-silver nanocomposite containing phosphine oxide moiety in the main chain was synthesized by a convenient ultraviolet irradiation technique.A precursor such as AgNO_3 was used as the source of the silver particles.Polyimide 6 as a source of polymer was synthesized by polycondensation reaction of bis(3-aminophenyl) phenyl phosphine oxide 4 with pyromellitic anhydride 5 in the presence of iso-quinoline as base and in m-cresol solution.The resulting composite film was characterized by FTIR spectroscopy,X-ray diffraction(XRD),transmission electron microscopy(TEM),thermogravimetry(TGA) and differential scanning calorimetry(DSC).The average size of the nanometer Ag particles is about 10 nm.The temperature of 5 and 10%weight loss and also the char yield at 600℃of polyimide-silver nanocomposite 6a were higher than the pure PI 6.     

Phospha‐Michael addition to enone‐containing triglyceride derivatives as an efficient route to flame retardant renewable thermosets

A novel phosphorus‐containing vegetable oil (PETR) was prepared through phospha‐Michael addition of a diphenyl phosphine oxide to the enone derivative of high‐oleic sunflower oil (ETR). The reaction was investigated using the enone derivative of methyl oleate under conventional thermal heating and microwave irradiation. The kinetic study showed a great enhancement of reaction rate for the microwave‐initiated addition. The crosslinking of ETR with diaminodiphenylmethane (DDM) via aza‐Michael addition was also investigated under microwave irradiation, showing a noticeable acceleration of the curing. The new phosphorus‐containing triglyceride was crosslinked with DDM to obtain phosphorus‐containing vegetable oil‐based thermosets of different phosphorus contents. Limiting oxygen index values from 26.4 to 35.0 for the final materials were obtained, demonstrating that the flame retardant properties of vegetable oil‐based thermosets can be improved by adding covalently bonded phosphorus to the polymer. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and characterization of new aromatic poly(amide-imide)s derived from bis(3-trimellitimidophenyl) phenyl phosphine oxide and various aromatic diamines

New aromatic poly(amide-imide)s with high inherent viscosities were prepared by direct polycondensation reaction of diimide-diacid (I) and aromatic diamines using triphenyl phosphite in N-methyl-2-pyrrolidone (NMP)/pyridine solution containing dissolved CaCl₂. The bis(3-trimellitimidophenyl) phenyl phosphine oxide (I) was readily obtained by the condensation reaction of bis(3-aminophenyl) phenyl phosphine oxide (BAPPO) with trimellitic anhydride. The resulting poly(amide-imide)s showed high thermostability. Their decomposition temperatures at 10% weight loss in nitrogen atmosphere were above 532 °C and the anaerobic char yield at 800 °C ranged from 56% to 74%. Almost all the poly(amide-imide)s showed high glass transition temperature above 233 °C by differential scanning calorimetry (DSC) measurements. These polymers were readily soluble in various organic solvents and by their casting into transparent, tough and flexible films can be easily achieved.     

Synthesis of high refractive‐index melt‐stable aromatic polyphosphonates

The synthesis of aromatic polyphosphonates based on the step polymerization of various bisphenols and dichlorophenyl phosphine oxide was investigated. The effect of catalyst, type, concentration, and polymerization time were systematically varied to obtain high molecular weight polymers. Very high molecular weight tough, ductile materials with a high degree of optical clarity were synthesized. In contrast with the aromatic polycarbonates, the refractive index was increased from 1.58 to 1.60 (for the bisphenol A‐based system) and 1.64 for a biphenol‐based system. The latter was still an amorphous soluble polymer as a result of the non‐coplanar nature of the phenyl phosphine oxide bond, unlike the analogous polycarbonate. Hydrolytically stable melt‐processable cumyl phenol end‐capped polyphosphonates were successfully achieved for the first time. Rheological studies show that these end‐capped systems are melt‐stable at 200 °C, whereas the systems of initially higher molecular weight but without any well‐defined end capping clearly degraded quickly probably as a result of an acid‐catalyzed hydrolysis process. Extensive high char yields were produced upon pyrolysis in either nitrogen or air, suggesting good fire resistance. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2904–2910, 2001     

Synthesis and characterization of UV‐curable phosphorus containing hybrid materials prepared by sol–gel technique

In this study, a series of ultraviolet (UV)‐curable organic–inorganic hybrid coating materials containing phosphorus were prepared by sol–gel approach from acrylate end‐capped urethane resin, acrylated phenyl phosphine oxide oligomer (APPO), and inorganic precursors. TEOS and MAPTMS were used to obtain the silica network and Ti:acac complex was employed for the formation of the titania network in the hybrid coating systems. Coating performance of the hybrid coating materials applied on aluminum substrates was determined by the analysis techniques, such as hardness, gloss, impact strength, cross‐cut adhesion, taber abrasion resistance, which were accepted by international organization. Also, stress–strain test of the hybrids was carried out on the free films. These measurements showed that all the properties of the hybrids were enhanced effectively by gradual increase in sol–gel precursors and APPO oligomer content. The thermal behavior of the hybrid coatings was investigated by thermogravimetric analysis (TGA) analysis. The flame retardancy of the hybrid materials was examined by the limiting oxygen index (LOI); the LOI values of pure organic coating (BF) increased from 31 to 44 for the hybrid materials containing phosphorus (BF‐P:40/Si:10). The data from thermal analysis and LOI showed that the hybrid coating materials containing phosphorus have higher thermal stability and flame resistance properties than the organic polymer. Besides that, it was found that the double bond conversion values for the hybrid mixtures were adequate in order to form an organic matrix. The polycondensation reactions of TEOS and MAPTMS compounds were also investigated by ²⁹Si‐NMR spectroscopy. SEM studies of the hybrid coatings showed that silica/titania particles were homogenously dispersed through the organic matrix. In addition, it was determined that the hybrid material containing phosphorus and silica showed fibrillar structure. Copyright © 2009 John Wiley & Sons, Ltd.     

Mixed (PS/PO)‐Stabilized Geminal Dianion: Facile Diastereoselective Intramolecular C?H Activations by a Related Ruthenium–Carbene Complex

A new unsymmetrical geminal dianion that contained both a phosphine oxide moiety and a phosphine sulfide moiety has been synthesized. Its reactivity towards Ru^II was explored, which led to the formation of a highly reactive carbene complex that evolved at room temperature to yield a kinetic orthometalated Ru^II complex through C? H activation of the phenyl group of the phosphine oxide moiety. This insertion was found to be thermally reversible and a second C? H insertion occurred at a phenyl group of the phosphine sulfide moiety to form the thermodynamic orthometalated Ru^II complex in a diastereospecific manner. DFT calculations fully rationalized the experimental findings in terms of the relative energies of the kinetic and thermodynamic products and allowed the mechanism of this process to be fully understood.     

Tripodal Phosphine Oxide Ligand with Tetrazole Functionality

Russian Journal of General Chemistry - Tris[2-(3′-cyanopropoxy)phenyl]phosphine oxide has been obtained via the alkylation of tris(2hydroxyphenyl)phosphine oxide with 4-bromobutyronitrile in...     

Blends of Aromatic Polyethers Bearing Polar Pyridine Units and Their Evaluation as High Temperature Polymer Electrolytes

Aromatic polyethers containing polar pyridine units in the main chain have been synthesized using different difluoride monomers. Copolymers of 2,5-(4′,4″dihydroxy biphenyl)-pyridine and 3,3′,5,5′-tetramethyl-[1,1′-biphenyl]-4,4′-diol with bis(4-fluorophenyl) sulfone or phenyl phosphine oxide difluoride or decafluorobiphenyl (PTMPySF, PTMPyPO, PTMPyDF) were synthesized. These polymeric structures despite their common structural characteristics, showed totally different behavior in terms of solubility and acid doping ability. Blends of these copolymers have been prepared in order to be evaluated in terms of fuel cell relevant parameters like acid doping ability and conductivity. In most cases flexible membranes were obtained by solution casting. The acid doping ability was controlled based on the blend constituents and composition. The doped membranes exhibited high conductivity values, in the range of 10⁻³ S/cm at room temperature which is increased at 2.5 × 10⁻² S/cm at temperatures up to 180 °C.     

The preparation of polymeric organophosphorus ligands for catalyst attachment

Polystyrene crosslinked with divinylbenzene (2 or 20%) was converted to polystyrene-lithium by treatment with a 1:1 complex of butyl-lithium- tetramethylethylenediamine in cyclohexane. The lithiated polymer was allowed to react with chlorodiphenylphosphine to produce polystyryldiphenylphosphine. The radial distribution and percent substitution of phosphine could be controlled over a wide range by controlling the reaction time and temperature. Rhodium (I) hydrogenation catalysts could be prepared from these polymeric ligands.