Allylstannation: VII. Preparation of carboxylic acid 1-alkene-4-yl and 1-alkyne-4-yl esters by transalkoxylation of 4-n-dibutylchlorostannoxy-1-alkenes and 4-n-dibutylchlorostannoxy-1-alkynes with acyl chlorides

Carboxylic acid 1-alkene-4-yl and 1-alkyne-4-yl, esters (RCH(CH₂CHCH₂)OCOR′ ad RCH(CH₂CCH)OCOR′, R = R′ or R ≠ R′ = alkyl or alkenyl group) can be readily prepared in high yields by transalkoxylation reactions between 4-n-dibutylchlorostannoxy-1-alkenes or 4-n-dibutylchlorostannoxy-1-alkynes with acyl chlorides. This represents a general route for preparation of esters containing allyl or propargyl groups.     

Living cationic polymerization route to poly(oligooxyethylene carbonate) vinyl ethers

The addition of dialkyl (R = Me or Et) carbonates to poly(oxyethylene)-based solid polymeric electrolytes resulted in enhanced ionic conductivities. Relatively high conductivities in lithium batteries with solutions of lithium salts in di(oligooxyethylene) carbonates such as R( OCH₂ CH₂ )_nOC(O) O ( CH₂CH₂O )_mR (R = Et, n = 1, 2, or 3, m = 0, 1, 2, or 3) and related carbonates were obtained. In this respect, related comb-shaped poly(oligooxyethylene carbonate) vinyl ethers of the type  CH₂CH(OR) were prepared [R = ( OCH₂ CH₂ )_nOC(O) O ( CH₂CH₂O )_mR′; (1) n = 2 or 3, m = 0, R′ = Et; (2) n = 2 or 3; m = 3, R′ = Me]. The direct preparation of derived target polymers of this class by polymerization of the corresponding vinyl ether-type monomers could not be achieved because of a rapid in situ decarboxylative decomposition of these monomers (as formed) during the final step of their synthesis. Instead, a prepolymer was prepared by a living cationic polymerization of CH₂CH (OCH₂CH₂ )_n O C(O) CH₃ (n = 2 or 3). The hydrolysis of its pendant ester groups, followed by the reaction of the hydrolyzed prepolymer with each of several alkyl chloroformates of the type Cl C(O) O( CH₂CH₂O )_mR′ (m = 0, 2, or 3, R′ = Me or Et) resulted in the corresponding target polymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2171–2183, 2002     

Stéréosélectiveté de la condensation aldolique. Réaction du benzaldéhyde et d'énolates carbéniates magnésiens α-chlorés

Alkyl chloracetates III (R′ = H) and phenylchloracetates III (R′ = Ph) condense with PhCHO in the presence of (i-Pr)₂NMgBr giving alkyl-2-chloro-3-hydroxy-3-phenyl propionates (RS, RS) (I) and (RS, SR) (II) in equal ratio ($\text{1}\text{1}$) for III (R′ = H) and in the ratio $\text{65}\text{35}$ for III (R′ = Ph) irrespective of the group R. When the same reaction is performed with alkyl chloropropionates III (R′ = CH₃) the isomer ratio is dependent upon the group R. These results are interpreted by considering a planar (R′ = H or Ph) or pyramidal (R′ = CH₃) geometry of the intermediate enolate-carbeniate.     

Activating effects of unsaturated and cyclopropyl groups in gas phase pyrolysis of acetates. Paper XVIII

The activating effects of a number of unsaturated groups and a cyclopropyl group have been evaluated in a solvent free system by determining the absolute rate constants, and energies and entropies of activation in the vapor phase pyrolysis of secondary and tertiary esters of the type RC(R′CH₃) OAc where R′ = H or CH₃ and R = c-Pr, i-Pr, CH₃, CH₂?CH, CH₂?CHCH₂, C₆H₅; the cyclopropyl showed only a moderate activating effect. The results are in contrast to the very significant activating effect of a cyclopropyl group in solvolysis of cyclopropylcarbinyl derivatives. Apparently marked activation by this group occurs only when a highly developed positive center forms adjacent to it. The lack of marked activation by the cyclopropyl group supports a mechanism for ester pyrolysis which involves a modest, but detectable, charge separation in the transition state [2] but questions a mechanism in which an intimate ion-pair was proposed [3].     

Heats of formation and thermal stability of substituted 1,1′-Azobis(tetrazole) compounds with an extended nitrogen chain

The molecular structures of 1,1′-Azobis(tetrazole) (N₁₀) and monosubstituted compounds involving  F,  CH₃,  CN,  NH₂,  OH,  OCH₃,  N₃,  NF₂,  NO₂, and  CH₂NO₂ groups are investigated using density functional theory. The heats of formation of these compounds are investigated using ab initio composite methods. Intrinsic reaction coordinate calculations are performed to determine the energies along the decomposition pathways. The optimized geometries of the N₁₀ compounds indicate planar configurations consisting of aromatic nitrogen–nitrogen and carbon–nitrogen bonds. The stability and energy content of the substituted compounds are highly correlated with the nature of the substituents. Electron-donating groups reduce the heats of formation but increase the exothermicity of the decomposition. The decomposition of the N₁₀ compounds is classified into two general pathways: (1) a scheme involving straight-up decomposition and (2) a scheme involving functional rearrangement. Compounds undergoing decomposition pathway (1) are more exothermic with lower rate-determining activation barriers than those undergoing the latter pathway (2).     

New dithiazinanes and bis‐dithiazinanes‐bearing pendant ethylamines: Structure and reactivity

The structure and reactivity of a series of new ethylaminedithiazinanes and bis‐diethylaminedithiazinanes synthesized from formaldehyde, NaSH, and N,N‐dimethyl‐ethylene‐diamine ( 1 ), N‐methyl‐ethylene‐diamine ( 2 ), and N‐ethyl‐ethylene‐diamine ( 3 ) are reported. Compound 1 afforded 2‐([1,3,5]‐dithiazinan‐5‐yl)‐ethylene‐N,N‐dimethyl‐amine ( 4 ). The reaction of 4 with dry CH₂Cl₂ gave N‐{2‐([1,3,5]dithiazinan‐5‐yl)‐ethylene}‐N‐chloromethyl‐N,N‐dimethyl‐ammonium chloride ( 5 ) in high yield, whereas in wet CH₂Cl₂ and DMSO provided a mixture of 5 with N‐{2‐([1,3,5]‐dithiazinan‐5‐yl)‐ethylene}‐N,N‐dimethyl‐ammonium hydrochloride ( 6 ).bis‐{2‐([1,3,5]‐Dithiazinan‐5‐yl)‐ethylene‐N‐alkyl‐amino}‐methylene‐disulfides ( 7 ) and ( 8 ) formed by two dithiazinanes linked through the chain  (CH₂)₂ NRCH₂ S S CH₂ NR (CH₂)₂‐ ( 7 R = methyl, 8 R = ethyl) reacted with CH₂Cl₂ giving after neutralization of the hydrolysis products the ethylaminedithiazinanes with different pendant N‐groups [ (CH₂)₂NMeH₂⁺( 9 );  (CH₂)₂NEtH₂⁺ ( 10 );  (CH₂)₂NMeH ( 11 );  (CH₂)₂NEtH ( 12 );  (CH₂)₂NMeHBH₃ ( 13 )  (CH₂)₂NEtHBH₃ ( 14 ).  (CH₂)₂NMe₂BH₃ ( 15 ), and  (CH₂)₂NEtMeBH₃.( 16 )]. The x‐ray diffraction analyses of compounds 5 , 6 , 9 , and 10 are reported. Variable temperature NMR experiments afforded the Δ G^≠ of the ring interconversion of the six‐membered heterocycles 6 , 9 , and 10 . © 2010 Wiley Periodicals, Inc. Heteroatom Chem 22:59–71, 2011; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.20657     

Chemistry of the 2,3-oxaphosphabicyclo[2.2.2]octene ring system: Extrusion of metaphosphates

The 2,3-oxaphosphabicyclo[2.2.2]octene 3-oxide (or sulfide) ring system is of considerable value because it easily fragments on being heated or irradiated (254 nm) to provide three-coordinate phosphoryl species. The system is synthesized by O-insertion with peracids into a C P bond of 7-phosphanorbornene derivatives with a variety of P-substituents. With rare exception, the insertion has been found to proceed with retention of the configuration at phosphorus, as established by X-ray and NMR techniques. The thermal fragmentation that produces the metaphosphate derivatives EtO PO₂, EtO P(S)O, and Et₂N PO₂ follows first-order kinetics, and is independent of the concentration of a trapping agent for these species. Solvent effects and activation parameters join in defining a retrocycloaddition mechanism that ejects the free metaphosphate. The species Ph PO₂ can also be easily generated either thermally or photochemically. Metaphosphates have been found to attack ethereal oxygen in epoxides and oxetanes, and may undergo anchimeric participation with a properly placed methoxy group on the substituent used in the 2,3-oxaphosphabicyclo[2.2.2]octene precursor.     

SN-2-artige massenspektrometrische Fragmentierungen bei substituierten N-Alkylpiperidinen. 10. Mitteilung über das massenspektrometrische Verhalten von Stickstoffverbindungen [1]

An S_N2-type fragmentation was observed on mass spectrometric analysis of N-(ω-X-alkyl)-2-alkylpiperidines (X = NRCOR′,  CONH₂,  COOR,  NH₂). The molecular ion after loss of the 2 alkyl substituent on the piperidine ring may eject the neutral piperideine on attack of the substituent X on the α-carbon of the N-substituted alkyl-chain. Through this process a cyclic fragment ion is formed. The influence of its ring size and of the substituent X on the stability of this fragment was investigated. The S_N2 reaction is favoured in the case of production of five- and six-membered rings.     

The fragmentations of [M-H]- anions derived from underivatised peptides. The side-chain loss of H2S from Cys. A joint experimental and theoretical study

Loss of H₂S is the characteristic Cys side‐chain fragmentation of the [M? H]^? anions of Cys‐containing peptides. A combination of experiment and theory suggests that this reaction is initiated from the Cys enolate anion as follows: RNH‐^?C(CH₂SH)CONHR′ Ø [RNHC(?CH₂)CONHR′ (HS^?)] Ø [RNHC(?CH₂)CO‐HNR′‐H]^?+H₂S. This process is facile. Calculations at the HF/6‐31G(d)//AM1 level of theory indicate that the initial anion needs only ≥20.1 kcal mol^?1 of excess energy to effect loss of H₂S. Loss of CH₂S is a minor process, RNHCH(CH₂SH)CON^?‐R′ Ø RNHCH(CH₂S^?)CONHR′ Ø RNH ^?CHCONHR+CH₂S, requiring an excess energy of ≥50.2 kcal mol^?1. When Cys occupies the C‐terminal end of a peptide, the major fragmentation from the [M–H]^? species involves loss of (H₂S+CO₂). A deuterium‐labelling study suggests that this could either be a charge‐remote reaction (a process which occurs remote from and uninfluenced by the charged centre in the molecule), or an anionic reaction initiated from the C‐terminal CO₂^? group. These processes have barriers requiring the starting material to have an excess energy of ≥79.6 (charge‐remote) or ≥67.1 (anion‐directed) kcal mol^?1, respectively, at the HF/6‐31G(d)//AM1 level of theory. The corresponding losses of CH₂O and H₂O from the [M? H]^? anions of Ser‐containing peptides require ≥35.6 and ≥44.4 kcal mol^?1 of excess energy (calculated at the AM1 level of theory), explaining why loss of CH₂O is the characteristic side‐chain loss of Ser in the negative ion mode. Copyright © 2003 John Wiley & Sons, Ltd.     

Formation of β-distonic oxonium ions: Study of ROCH2CH2OR′ radical cations

Radical cations derived from the ethers ROCH₂CH₂OR′ (R, R′ = H, CH₃, C₂₅) were studied, since β-distonic oxonium ions are often prepared from ionized ethers of glycol. The first step in the fragmentation is a 1,5-transfer of an α-hydrogen to oxygen of a terminal alkoxy group leading to a δ-distonic oxonium ion. This step is thermo-neutral and reversible in the ROCH₂CH₂OH radical cations and exothermic and irreversible in the dialkyl ether radical cations. Depending on R and R,′ these δ-distonic oxonium ions fragment by three reactions: the loss of an alcohol or a water molecule, the formation of a β-distonic oxonium ion ˙CH₂CH₂O(H)⁺R and a 1,4-H migration between carbon atoms. Competition between these processes is discussed.     

Preparation of poly(alkylenebenzimidazole) by ruthenium complex catalyzed polycondensation of 3,3′‐diaminobenzidine with α,ω‐diols

The reactions of 3,3′‐diaminobenzidine with 1,12‐dodecanediol in 1 : 1–1:3 molar ratios in the presence of RuCl₂(PPh₃)₃ catalyst give poly(alkylenebenzimidazole), [ (CH₂)₁₁ O (CH₂)₁₁ Im / (CH₂)₁₀ Im ]_n (Im: 5,5′‐dibenzimidazole‐2,2′‐diyl) (I_a‐I_d) in 71–92% yields. The relative ratio between the [(CH₂)₁₁ O (CH₂)₁₁ Im ] unit (A) and the [‐ (CH₂)₁₀ Im ] unit (B) in the polymer chain varies depending on the ratio of the substrates used. The polymer I_a obtained from the 1 : 3 reaction contains these structural units in a 98 : 2 ratio. The polymers are soluble in polar solvents such as DMF (N,N‐dimethylformamide), DMSO (dimethyl sulfoxide), and NMP (N‐methyl‐2‐pyrrolidone) and have molecular weights M_n (M_w) of 4,200–4,800 (4,800–6,500) by GPC (polystyrene standard). The polymerization of the diol and 3,3′‐diaminobenzidine in higher molar ratios leads to partial cross‐linking of the resulting polymers I_e and I_f via condensation of imidazole NH group with CH₂OH group. Similar reactions of 3,3′‐diaminobenzidine with α,ω‐diols, HO(CH₂)_mOH (m = 4–10), in a 1 : 3 molar ratio give the polymers containing [ (CH₂)_m−1 O (CH₂) _m−1 Im ] and [ (CH₂) _m−2 Im ] units with partial cross‐linked structures. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1383–1392, 1999     

Thermally stable rigid π-allylnickel compounds, (π-CHRCR′CR2)Ni(PPhMe2)C6Cl5

The reaction of C₆Cl₅Ni(PPhMe₂)₂Cl with CHRCR′CH₂MgX (X = Br or Cl) yields π-allylnickel compounds, (π-CHRCR′CH₂)Ni(PPhMe₂)C₆Cl₅ (Ia, R = R′ = H; Ib, R = H, R′ = CH₃; Ic, R = CH₃, R′ = H), which are stable in the solid state below ca. 150°C and are fairly stable in solution in the absence of oxygen. The π-allyl group was found by PMR spectroscopy to be rigid even in the presence of an excess of PPhMe₂, P(OEt)₃ or P(OMe)₃.     

Site Selectivity in the Gas-Phase Ionic Phenylation of Alcohols and Alkyl Chlorides

Free, unsolvated phenylium ions formed by the spontaneous β decay of [1,4-³H₂]benzene have been allowed to react with gaseous alcohols (ROH: R = Et, CF₃CH₂, Pr, or i-Pr; partial pressure: 3–56 Torr) and alkyl chlorides (R′Cl: R′ = Pr, i-Pr, or Bu; partial pressure: 20–450 Torr), in the presence of a thermal radical scavenger (O₂: 4 Torr). Phenylium ion confirms its considerable site selectivity, demonstrated by the distinct preference toward the n-centre of the substrate (46–100%), although significant insertion into the alkyl group of alcohols is observed as well. Phenylium ion displays significant positional selectivity even between different n-type sites in a bidentate molecule such as CF₃CH₂OH. An affinity F < O < Cl trend is observed, which indicates a direct relationship between the polarizability of the n-centre of the molecule and its orienting properties toward phenylium ion. The stability features of the ionic intermediates from addition of phenylium ion with ROH or R′Cl have been evaluated, as well as their fragmentation and isomerization mechanisms. The behaviour of phenylium ion toward the selected substrates in the gas phase is discussed and compared with previous mechanistic hypotheses from related nuclear-decay studies.     

Über Chalkogenolate. 138. Untersuchungen über Dialkylester von Chalkogenokohlensäuren 1. O,Se-Dialkylmonoselenocarbonate

On chalcogenolates. 138. Studies on Dialkyl Esters of Chalcogenocarbonic A cids. 1. O, Se-Dialkyl Monoselenocarbonates The esters RSe? CO? OR′ with R = R′ = C₂H₅ as well as with R = ⁿC₃H₇ and R′ = CH₃, C₂H₅ have been prepared by reaction of sodium alkane selenolates with alkyl esters of chloroformic acid. The compounds have been characterized by means of electron absorption, infrared, nuclear magnetic resonance (¹H, ¹³C, and ⁷⁷Se), and mass spectra.     

Synthesis of a Stable Selenoaldehyde by Self‐Catalyzed Thermal Dehydration of a Primary‐Alkyl‐Substituted Selenenic Acid

The unprecedented dehydration of a selenenic acid (RCH₂SeOH) to a selenoaldehyde (RCH?Se) has been demonstrated. A primary‐alkyl‐substituted selenenic acid was synthesized for the first time by taking advantage of a bulky cavity‐shaped substituent. Upon heating in solution, the selenenic acid underwent thermal dehydration to produce a stable selenoaldehyde, which was isolated as stable crystals and crystallographically characterized. Investigation of the reaction mechanism revealed that this β dehydration reaction involves two processes, both of which reflect the characteristics of a selenenic acid: 1) dehydrative condensation of two molecules of selenenic acid to generate a selenoseleninate intermediate [RCH₂SeSe(O)CH₂R], an isomer of a selenenic anhydride, and 2) subsequent β elimination of the selenenic acid from this intermediate to form a C?Se double bond, which establishes the self‐catalyzed β dehydration of the selenenic acid.     

New insight into the substituent effects on the hydrolytic deamination of saturated and unsaturated cytosine

Ab initio calculations were carried out to understand the effect of electron donating groups (EDG) and electron withdrawing groups (EWG) at the C5 position of cytosine (Cyt) and saturated cytosine (H₂Cyt) of the deamination reaction. Geometries of the reactants, transition states, intermediates, and products were fully optimized at the B3LYP/6-31G(d,p) level in the gas phase as this level of theory has been found to agree very well with G3 theories. Activation energies, enthalpies, and Gibbs energies of activation along with the thermodynamic properties (ΔE, ΔH, and ΔG) of each reaction were calculated. A plot of the Gibbs energies of activation (ΔG^‡) for C5 substituted Cyt and H₂Cyt against the Hammett σ-constants reveal a good linear relationship. In general, both EDG and EWG substituents at the C5 position in Cyt results in higher ΔG^‡ and lower σ values compared to those of H₂Cyt deamination reactions. C5 alkyl substituents ( H,  CH₃,  CH₂CH₃,  CH₂CH₂CH₃) increase ΔG^‡ values for Cyt, while the same substituents decrease ΔG^‡ values for H₂Cyt which is likely due to steric effects. However, the Hammett σ-constants were found to decrease at the C5 position of cytosine (Cyt) and saturated cytosine (H2Cyt) on the deamination reaction. Both ΔG^‡ and σ values decrease for the substituents Cl and Br in the Cyt reaction, while ΔG^‡ values increase and σ decrease in the H₂Cyt reaction. This may be due to high polarizability of bromine which results in a greater stabilization of the transition state in the case of bromine compared to chlorine. Regardless of the substituent at C5, the positive charge on C4 is greater in the TS compared to the reactant complex for both the Cyt and H₂Cyt. Moreover, as the charges on C4 in the TS increase compared to reactant, ΔG^‡ also increase for the C5 alkyl substituents ( H,  CH₃,  CH₂CH₃,  CH₂CH₂CH₃) in Cyt, while ΔG^‡ decrease in H₂Cyt. In addition, analysis of the frontier MO energies for the transition state structures shows that there is a correlation between the energy of the HOMO–LUMO gap and activation energies.     

Fragmentation in chemical ionization mass spectrometry and the proton affinity of the departing neutral

Chemical ionization mass spectra of six 5,6-dihydro-2-methyl-1,4-oxathiins, and some of the sulfoxides and sulfones derived therefrom, have been determined employing hydrogen, methane and isobutane as reagent gases. The major fragmentation reaction of the protonated molecule, [R′COX·H]⁺, involves loss of the neutral HX molecule. For the sulfides and sulfones, with X ranging from OH to N(CH₃)C₆H₅, it is observed that the importance of this fragmentation is inversely correlated with the proton affinity of the departing HX molecule in both the H₂ and CH₄ chemical ionization. For the sulfoxides no consistent correlation is observed and this is attributed to the interference of competing and/or consecutive fragmentation reactions. In the isobutane chemical ionization mass spectra only the protonated molecule is observed for most of the compounds studied.     

Strukturuntersuchungen an SIVN3-Gruppierungen. IV [1-3]

N-chloralkyl-nitridochloro Complexes of Molybdenum (VI). [Cl₅MoN-R]⁻ with R = CCl₃, C₂Cl₅. Crystal Structure of (AsPh₄)₂[(MoOCl₄)₂CH₃CN] In the reaction of tetraphenyl arsonium chloride with the complexes Cl₃PO (Cl₄)-MoN R (R=CCl₃, C₂Cl₅) the POCl₃ is displaced by chloride and yields [Cl₅MoN R] ⁻. From the i.r. spectra a structure with six-coordinated molybdenum and a MoN triple bond can be deduced. By reaction with water in acetonitrile the molybdenum is reduced to Mo(V) and the nitride ligand is removed yielding (AsPh₄)₂[(MoOCl₄)₂CH₃CN]. The crystal structure of this compund was determined with X-ray diffraction data. In the tetragonal structure (space group P4/n) AsPh₄⁺ cations and two different anions were found: square pyramidal [MoOCl₄]⁻ and [MoOCl₄ · NCCH₃]⁻ in which the nitrile is bonded in trans position to the oxygen. The short Mo O distances of 165 pm indicate a strong π-bonding.     

Über Chalkogenolate. 81. Untersuchungen über N-Hydroxydithiocarbamidsäure 3. Ester der N-Hydroxydithiocarbimidsäure und -carbamidsäure

On Chalcogenolates. 81. Studies on N-Hydroxy Dithiocarbamic Acid. 3- Esters of N-Hydroxy Dithiocarbimic Acid and Dithiocarbamic Acid The reaction between hydroxylamine, carbon disulfide, and alkyl halide leads to the corresponding ester of N-hydroxy dithiocarbimic acid HO? N?C(SR)₂ with R = CH₃, C₂H₅; R₂ = ? CH₂? CH₂? . The phenyl ester of N-hydroxy dithiocarbamic acid HO? NH? CS(SC₆H₅) has been prepared by reaction of hydroxylammonium chloride with the phenyl ester of chlorodithioformic acid. N-Methyl hydroxylammonium chloride reacts with carbon disulfide and alkyl iodide to form the corresponding ester of the dithiocarbamic acid HO? N(CH₃)? CS(SR) with R = CH₃, C₂H₅. The unstable compounds have been characterized by different methods.     

Spectroscopically tracing the reactions of octahydridosilsesquioxane (H8Si8O12) with organic molecules

This article studies the reactions and mechanisms of H₈Si₈O₁₂ (T₈H₈) molecules with n-propanol, acetone, allyl alcohol, n-butylamine, allylamine, acetic acid, and 1-octene in air, at room temperature, and without catalysts. The reaction between T₈H₈ and n-propanol involves both the highly polarized Si O and Si H bonds and results in cage breakage and forming Q⁴ and Q³ structures with  OC₃H₇ in the reaction product. T₈H₈ also reacts with acetone, and the resultant product possesses Si OCH(CH₃)₂. Allyl alcohol is less reactive to cause T₈H₈ decomposition, and the resultant product contains Si OCH₂CHCH₂ and Si OCH₂(CH₂)₃CHCH₂. However, it is found that basically T₈H₈ does not react with acetic acid and 1-octene. In the reactions of T₈H₈ with n-butylamine and allylamine, the resultant products contain Si NH(CH₂)₃CH₃ and Si NHCH₂CHCH₂, respectively. For the reaction with T₈H₈, allylamine is less active than n-butylamine. Possible mechanisms for the T₈H₈ reactions are discussed.