Photohole screening effects in polythiophenes with pendant groups

We compare two mechanisms that dominate the temperature-dependent changes in electronic structure for poly(3-hexylthiophene-2,5 diyl) (P3HT). Structural changes in the relative orientation and configuration of the aromatic ring backbone are observed to occur over a wide range in temperature and affect the local final state screening in photoemission. There are also changes in conductivity and carrier concentration at lower temperatures leading to altered long-range intramolecular screening of photoholes and final state effects that affect excitation spectroscopies including photoemission. For polyethylenedioxythiophene (PEDOT), temperature-dependent changes in the structure and configuration of the polymer backbone are not as significant, although temperature-dependent final state effects are observed.     

Thermochromic properties of low-melting ionic uranyl isothiocyanate complexes

Temperature-dependent yellow-to-red colour changes of uranyl thiocyanate complexes with 1-alkyl-3-methylimidazolium cations have been studied by different spectroscopic methods and this phenomenon is attributed to changes in the local environment of the uranyl ion, including the coordination number, as well as to cation-anion interactions.     

Effect of residual monomer on the spectroscopic properties of polythiophenes

The addition of some small molecules can red shift UV-Visible absorption and quench the fluorescence of poly(3-octadecylthiophene).     

Photo-physical and electro-optical properties of polythiophenes bearing tetrahydropyran side groups

Photo-physical and electro-optical properties of regio-regular polythiophenes functionalized with tetrahydropyran (THP) moieties tethered to the main chain by alkyl spacers are reported. Three sets of polymers were characterized. One consisted of polythiophenes in which THP groups were attached by either ethyl or undecyl side chains. The former exhibited solid state quantum yield of photoluminescence (Φ_pl) of 12%, while the undecyl analog exhibited a value of only 2.7%. Non-optimized polymer LEDs displayed orange and red emission for the ethyl and undecyl analogs, respectively. A second series of polymers investigated was based on random copolymers of 3-(2-(2-tetrahydropyranyloxy)ethyl)thiophene) and 3-hexyl, dodecyl or hexadecyl-thiophene. Polymers possessing shorter alkyl chains possessed shorter solid-state absorption and emission wavelengths but greater quantum yields of luminescence. The third series was based on random copolymers 3-(2-(2-tetrahydropyranyloxy)ethyl)thiophene) with various amounts of 3-hexylthiophene. As the 3-hexylthiophene content was reduced, the solid-state absorption and emission wavelengths decreased, while quantum yields of luminescence increased. Differences in luminescent properties are explained on the basis of extent of interchain aggregation induced by π–π intermolecular interactions and/or local ordering/disordering of alkyl chains.     

Cooperative effects in the photophysical properties of self-associated triguanosine diphosphates

The present study deals with the photophysical properties of triguanosine diphosphate in aqueous solutions, which are compared with those of the 2'-deoxyguanosine monophosphate. They are studied by steady-state absorption and fluorescence spectroscopy as well as by time-resolved fluorescence spectroscopy with femtosecond resolution. The temperature, salt and concentration dependence of the absorption and fluorescence spectra reveal that association of the trimers takes place. The resulting aggregates could correspond to a tetraplex structure. The aggregate fluorescence quantum yield is higher and the fluorescence lifetime much longer than those of the monomer. These results show the interaction between guanosine residues that may manifest itself via self-solvation, hydrogen bonding and/or delocalization of the excitation.     

Reactive polythiophenes with zincke salt structure: Synthesis,polymer reactions,and chemical properties

Polythiophenes with reactive Zincke salt structure, such as PThThPy⁺DNP(Cl^?)Th , were synthesized by the oxidation polymerization of 3′‐(4‐N‐(2,4‐dinitrophenyl)pyridinium chloride)‐2,2′:5′,2″‐terthiophene ( ThThPy⁺DNP(Cl^?)Th ) with iron(III) chloride or copper(II) trifluoromethanesulfonate. The reaction of PThThPy⁺DNP(Cl^?)Th with R‐NH₂ (R = n‐hexyl (Hex) and phenyl (Ph)) substituted the 2,4‐dinitrophenyl group into the R group with the elimination of 2,4‐dinitroaniline to yield PThThPy⁺R(Cl^?)Th . Similarly, model compounds, ThThPy⁺R(Cl^?)Th (R = Hex and Ph), were also synthesized. In contrast to the photoluminescent ThThPyTh and PThThPyTh , the compounds PThThPy⁺DNP(Cl^?)Th , PThThPy⁺R(Cl^?)Th , and ThThPy⁺R(Cl^?)Th showed no photoluminescence because their internal pyridinium rings acted as quenchers. Cyclic voltammetry measurements suggested that PThThPy⁺DNP(Cl^?)Th received an electrochemical reduction of the pyridinium and 2,4‐dinitrophenyl groups and oxidation of the polymer backbone. PThThPy⁺DNP(Cl^?)Th was electrically conductive (ρ = 2.0 × 10^?6 S cm^?1) in the non‐doped state. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

A family of main-chain polymeric Lewis acids: synthesis and fluorescent sensing properties of boron-modified polythiophenes

A new family of main-chain organoborane polymeric Lewis acids (PTh-BAr) that contain Lewis acidic boron groups embedded into a polythiophene backbone has been prepared under mild conditions through tin-boron exchange reaction. When phenyl and pentafluorophenyl groups are attached to boron, blue and green luminescence is observed, respectively, while the attachment of ferrocenyl substituents leads to a characteristic red color. The incorporation of readily accessible highly Lewis acidic groups into the conjugated polymer backbone provides an opportunity for sensing of Lewis basic substrates. For instance, treatment of the polymer containing phenyl substituents on boron with pyridine leads to efficient quenching of the fluorescence, while the polymer containing ferrocenyl groups changes color from dark red to light orange.     

Incorporation of a conjugated side‐chain in regioregular polythiophenes: Chiroptical properties and selective oxidation

The synthesis, aggregation, and optical properties of a chiral, regioregular polythiophene, substituted with a conjugated substituent, are described. The polymer was prepared using a Stille coupling reaction. The fact that the side‐chain contributes to the absorption (UV‐vis), emission (fluorescence), and redox behavior (cyclic voltammetry) of the material demonstrates that the substituent contributes to the electronic properties. It was shown that the conjugated side‐chain chirally stacks in conditions in which the polymer backbone aggregates, which demonstrates the ability of conjugated polymers to induce a (chiral) lamellar organization of conjugated moieties, present in their side‐chain. The aggregation of both the side‐chain and the backbone was monitored using UV‐vis and CD spectroscopy. Finally, it is shown that the conjugated side‐chain can selectively be oxidized, without oxidizing the polythiophene backbone. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1891–1900, 2009     

Soluble alkyl substituted polygermanes: Thermochromic behavior

We have prepared a number of high molecular weight, soluble, symmetrical dialkyl substituted germanium homopolymers and germanium-silicon copolymers. In solution, the absorption of the homopolymers was ～ 20 nm red shifted from the crossponding silicon derivatives. This was somewhat unexpected based on theoretical predictions and has been rationalized on the basis of conformational arguments. In the solid state, samples of poly(di-n-hexylgermane) and poly(di-n-octylgermane) are strongly thermochromic. The effect is attributed to the conformational locking of the backbone which is caused by the crystallization of the side groups. In this regard, the germanium derivatives behave similarly to the corresponding silicon polymers, and the convergence of the long wavelength absorptions for both types of polymers is consistent with theoretical predictions. The germanium-silicon copolymers are also strongly thermochromic, but the long wavelength absorption is somewhat blue shifted (8 nm) from the respective homopolymers. As expected, the new germanium homo and copolymers are quite sensitive to light and readily undergo chain scission to produce lower molecular weight materials.     

Reactive regioregular oligothiophenes and polythiophenes with Zincke salt structure: Synthesis,reactions, and chemical properties

Polythiophenes with reactive Zincke salt structure, P4ThPy⁺DNP(Cl^?)‐a and P5ThPy⁺DNP(Cl^?)‐a , were synthesized by the oxidation polymerization of oligothiophenes, such as 3'‐(4‐N‐(2,4‐dinitrophenyl)pyridinium chloride)?2,2':5',2'';5'',2'''‐quarterthiophene ( 4ThPy⁺DNP(Cl^?) ) and 4''‐(4‐N‐(2,4‐dinitrophenyl)pyridinium chloride)?2,2';5',2'';5'',2''';5''',2''''‐quinquethiophene ( 5ThPy⁺DNP(Cl^?) ), with iron(III) chloride. The reaction of P5ThPy⁺DNP(Cl^?)‐a with R‐NH₂ [R = n‐hexyl (Hex) and phenyl (Ph)] substituted the 2,4‐dinitrophenyl group into the R group with the elimination of 2,4‐dinitroaniline to yield P5ThPy⁺R(Cl^?) . Similarly, model compounds, 4ThPy⁺R(Cl^?) and 5ThPy⁺R(Cl^?) (R = Hex and Ph), were also synthesized. In contrast to the photoluminescent 4ThPy and 5ThPy , the compounds P4ThPy⁺DNP(Cl^?)‐a , P5ThPy⁺DNP(Cl^?)‐a , and P5ThPy⁺R(Cl^?) showed no photoluminescence because their internal pyridinium rings acted as quenchers. Cyclic voltammetry measurements suggested that P4ThPy⁺DNP(Cl^?)‐a , P5ThPy⁺DNP(Cl^?)‐a , and P5ThPy⁺R(Cl^?) received an electrochemical reduction of the pyridinium and 2,4‐dinitrophenyl groups and oxidation of the polymer backbone. P4ThPy⁺DNP(Cl^?)‐a and P5ThPy⁺DNP(Cl^?)‐a were electrically conductive (ρ = 3.0 × 10 ^{? 6} S cm ^{? 1} and 2.1 × 10 ^{? 6} S cm ^{? 1}, respectively) in the nondoped state. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 481–492     

Structure–property studies and orientation effects of polythiophenes containing mesogenic side chains

Liquid crystalline materials display unique properties, which can be exploited in organic light emitting diodes. Polythiophene model compounds containing phenyl groups linked with azomethine, ester, and alkoxy groups [thiophene‐3‐alkyloxy benzoyloxy aniline series (N series) and thiophene‐3‐alkoxy phenoxy amino benzoate series (R Series)] were synthesized. Molecular orbital calculations were performed and the predicted band gaps compared to understand the effects of spacer length and linkage. The experimental photoabsorption characteristics are compared with the theoretically predicted band gap. Photoabsorption and emission studies on N series and R series polymers as the function of polarizer angle suggest that polymers of both series emit polarized light in all base color ranges. The electroemission characteristics of the above‐synthesized polymers were also recorded as the function of polarizer angle. The results show that the compounds also emit polarized electroemission, and the EL polarization ratio decreases with the increase of alkoxy chain length for N and R polymers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1463–1477, 2008     

Synthesis and photovoltaic properties of two-dimensional conjugated polythiophenes with bi(thienylenevinylene) side chains

Three two-dimensional (2-D) conjugated polythiophenes with bi(thienylenevinylene) side chains (biTV-PTs), P1, P2, and P3, were designed and synthesized for application in polymer solar cells. The absorption spectral, electrochemical, and photovoltaic properties of the biTV-PTs were investigated and compared with those of poly(3-hexylthiophene) (P3HT). The biTV-PTs show a broad absorption band from 350 to 650 nm; especially, the absorption spectrum of P3 displays a broad plateau and much stronger absorbance than that of P3HT in the wavelength range from 350 to 480 nm. Cyclic voltammograms reveal that the onset oxidation and reduction potentials of the biTV-PTs positively shifted by ca. 0.2 V in comparison with those of P3HT, indicating that the HOMO energy level of the biTV-PTs is ca. 0.2 eV lower than that of P3HT. Polymer solar cells (PSCs) were fabricated based on the blend of the polymers and 1-(3-methoxycarbonyl)propyl-1-phenyl-[6,6]-C-61 (PCBM) with a weight ratio of 1:1. The open circuit voltage of the PSCs based on the biTV-PTs is ca. 0.1 V higher than that of P3HT, which is benefited from the lower HOMO levels of the biTV-PTs. The maximum power conversion efficiency (PCE) of the PSCs based on P3 reached 3.18% under AM 1.5, 100 mW/cm2, which is 38% increased in comparison with that (2.41%) of the devices based on P3HT under the same experimental conditions. The results indicate that the 2-D conjugated biTV-PTs are promising polymer photovoltaic materials.     

Non-ionic polythiophenes: a non-aggregating folded structure in water

The non-aggregating nature of a water-soluble pi-conjugated polythiophene has been characterised by concentration independent thermal denaturing.     

Role of polythiophenes as electroactive materials

Semiconducting polythiophenes display electroactive properties which make them excellent candidates for applications as electroactive materials. Ability to undergo doping and to switch between different oxidation states allow tuning the chemical and physical properties of polythiophenes. Furthermore, the ability to integrate polythiophenes into copolymers, hybrid composites with metals and inorganic materials make them useful in electronic and biomedical applications. The capability to vary the properties of the final material with low production cost and high processability into thin films makes polythiophenes desirable materials for many applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3327–3346     

Excitonic coupling in polythiophenes: comparison of different calculation methods

In conjugated polymers the optical excitation energy transfer is usually described as Forster-type hopping between so-called spectroscopic units. In the simplest approach using the point-dipole approximation the transfer rate is calculated based on the interaction between the transition dipoles of two spectroscopic units. In the present work we compare this approach with three others: The line-dipole approximation, the Coulomb integral between the transition densities, and a quantum-chemical calculation of the interacting dimer as entity. The latter two approaches are based on the semiempirical method ZINDO. The line-dipole approximation is an attractive compromise between computational effort and precision for calculations of the excitonic coupling in extended conjugated polymers.     

Synthesis and properties of conjugated fluoroalkyl ether-substituted polythiophenes prepared in organic solvent and supercritical carbon dioxide

A number of new fluoroalkyl ether-containing polythiophenes are synthesized via oxidative polymerization in supercritical CO₂ (scCO₂) and chloroform. In both cases, high-molecular-mass polymers with high yields are prepared. The properties of the polymers synthesized in scCO₂, such as molecular mass, polydispersity, conjugation, and UV absorption, are similar to the properties of the polymers obtained in chloroform. All poly(fluoroalkyl ether thiophenes) show solubility in DMF, toluene, THF, chloroform, and acetone. The glass-transition temperatures of the polymers are in the range 58–82°C, and the temperatures corresponding to 10% loss in their weight are in the ranges 248–294 and 260–303°C for poly(fluoroalkyl ether thiophenes) synthesized in scCO₂ and chloroform, respectively. All polymers fluoresce in the blue region with emission maxima at 506 to 526 nm. Because of the unique combination of fluoroalkyl and carbonyl groups, poly(fluoroalkyl ether thiophenes) feature good solubility in scCO₂, which is a promising alternative solvent for the oxidative polymerization of fluoroalkyl ether thiophenes.     

可逆热色性化合物的研究进展

本文就可逆热色性化合物的研究现状和发展趋势进行了评述, 着重介绍了可逆热色性化合物的类别、变色原理及应用等。     

Conducting polythiophenes with a broad spectrum of reactive groups

The development of reliable and reproducible chemistries for the immobilization of biomolecules to a conducting polymer is a key challenge in the design and preparation of a CP‐based biosensor. In this article, the syntheses and electropolymerization of a series of new 3‐alkylthiophene derivatives functionalized with the most used reactive groups in immobilization chemistry, including maleimide, azide, and anhydride, are described. Despite the nucleophilic or electrophilic nature of the reactive groups, the synthesized thiophene monomers exhibit rather good polymerizability, and the reactive groups withstand the polymerization conditions and are correctly incorporated into the resulting electroactive polymers. The reactivity of the pendant reactive groups of the resulting polymers to attach biomolecules has been examined with different redox‐active, photoactive compounds as well as recognition elements as model compounds. It has been confirmed that with well‐established procedures developed for the immobilization of enzymes, the model compounds can be easily and selectively bound onto these new conducting polymers without the loss of their optical and electrochemical activity. Therefore, these conductive materials with a broad spectrum of reactive groups will provide a useful platform for developing CP‐based biosensors for a wide range of applications. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4547–4558, 2005     

Cooperative effects in polymolecular nitrogen clusters

The structures and stabilities of the van der Waals clusters (N₂) _n (n = 2–8) have been evaluated using ab initio calculations at the MP2(full)/6–311+G* and CCSD(full)/6–311+G* level of theory. At n = 2–4, the formation of planar and three-dimensional structures is possible. At n > 4, only “globular” structures can be formed, whose formation energies increase with the cluster size. As the number of interacting molecules increases, the examined systems exhibit cooperative effects associated with non-additive enhancement of nonbonded intermolecular interactions.