Column Solid-Phase Extraction with 2-Acetylmercaptophenyldiazoaminoazobenzene (AMPDAA) Impregnated Amberlite XAD-4 and Determination of Trace Heavy Metals in Natural Waters by Flame Atomic Absorption Spectrometry

A column solid-phase extraction (SPE) preconcentration method was developed for the determination of Cd, Co, Cu, Ni and Zn ions in natural water samples by flame atomic absorption spectrometry. The procedure is based on the retention of analytes in the form of 2-acetylmercaptophenyldiazoaminoazobenzene (AMPDAA) complexes on a short column of AMPDAA-XAD-4 resin from buffered sample solution and subsequent elution with hydrochloric acid plus sodium chloride. Important SPE parameters were optimized using model solutions. The loading half-time, t_1/2, for Cd, Co, Cu and Zn was found to be less than 5min, and for Ni the value was 12min. The detection limit for Cd, Co, Cu, Ni and Zn was 0.028, 0.064, 0.042, 0.023 and 0.16µgL^–1, respectively, and the quantification limit was 0.043, 0.11, 0.099, 0.044 and 0.29µgL^–1, respectively. The AMPDAA-XAD-4 resin has good selectivity for Cd, Co, Cu, Ni and Zn over several electrolytes, especially over earth alkaline metals with tolerance limits of 0.05molL^–1. The method was validated by analysing a standard reference material (GBW 08301), and it was found that the results agree with those quoted by the manufactures. The developed method was applied to the determination of trace metal ions in tap water and river water samples with satisfactory results.     

Non-Extractive Simultaneous Spectrophotometric Determination of Trace Quantities of Palladium(II) and Tungsten(VI)

A second order derivative spectrophotometric method has been developed for the simultaneous determination of Palladium(II) and Tungsten(VI) using 3,4-dihydroxybenzaldehyde isonicotinoylhydrazone (3,4-DHBINH) as a new complexing agent. The Pd(II) reacts with 3,4-DHBINH in the pH range from 3 to 7 to form green colored solution. The absorbance calibration curves were constructed for palladium(II) at 362 nm (0.53～6.40 μg/ml) and tungsten(VI) at 374 nm (0.92～11.40 μg/ml). The metal ions interfere with each other in determination of zero order as well as the first order spectrophotometry. The optimum condition for maximum color development and other analytical parameters were evaluated. The method was applied successfully for the determination of palladium in hydrogenation catalyst and tungsten in industrial waste water samples.     

催化动力学光度法对食品中痕量元素分析的研究进展

随着人们生活水平的不断提高,食品中痕量元素的含量越来越引起人们的关注.综述了近十年来催化动力学光度法在食品分析中对痕量元素进行测定的研究情况,并对催化动力学光度法在食品分析中的应用前景和研究方向进行了展望.     

Cloud Point Extraction Simultaneous Spectrophotometric Determination of Zn(II), Co(II) and Ni(II) in Water and Urine Samples by 1-(2-Pyridylazo)2-Naphthol Using Partial Least Squares Regression

A cloud-point extraction (CPE) process using the nonionic surfactant Triton X-114 to simultaneous extraction and spectrophotometric determination of Zn(II), Co(II) and Ni(II) from aqueous solution using partial least squares (PLS) regression is investigated. The method is based on the color reaction of these cations with 1-(2-pyridylazo)2-naphthol and subsequent micelle-mediated extraction of products. The optimum extraction and reaction conditions such as pH, reagents concentration and effect of time have been studied. Linearity was obeyed in the range 2–150, 5–250 and 2–150 ng mL⁻¹ of Zn(II), Co(II) and Ni(II) respectively. The relative standard error (RSE) for the simultaneous determination of 15 test samples of different concentrations of Zn(II), Co(II) and Ni(II) was 4.38%;, 1.18% and 2.42%, respectively. The total relative standard error (RSE_t) for applying the PLS method to 15 synthetic samples in the linear ranges of these metals was 2.36%. The interference effect of some anions and cations was also tested. The method was applied to the simultaneous determination of Zn(II), Co(II) and Ni(II) in water and human urine samples.     

Solid Phase Extraction and Spectrophotometric Determination of Silver with 2-(2-Quinolylazo)-5-diethylaminoaniline as Chromogenic Reagent

 A new chromogenic reagent, 2-(2-quinolylazo)-5-diethylaminoaniline(QADEAA), was synthesized. A highly sensitive, selective and rapid method for the determination of silver was developed. It is based on the rapid reaction of silver (I) with QADEAA and the solid phase extraction of colored chelate using reversed-phase separation cartridge. At pH 6.5 in the presence of sodium dodecyl sulfonate (SDS), QADEAA reacts with silver to form a violet chelate in a molar ratio of 1:2 (silver to QADEAA). This chelate was enriched by solid phase extraction. The retained chelate can be eluted from the cartridge with ethanol. In ethanol medium, the molar absorptivity of the chelate is 1.36×10⁵ L·mol⁻¹·cm⁻¹ at 590 nm. Beer’s law is obeyed in the range 0.01–0.6 μg L⁻¹. The relative standard deviation for eleven replicate samples of 0.01 μg L⁻¹ level is 1.9%. The detection limit reaches the 0.02 μg L⁻¹ level. This method shows satisfactory results when used for the determination of silver in water. Correspondence: Department of Chemistry, Yuxi Teacher’s College, Yuxi, 653100, P.R. China. e-mail: hugiufena@163.com Received 19 August 2002; accepted 20 October 2002     

Spectrophotometric Determination of Trace Chromium(VI) in Mass Chromium(III)

There is little conclusive evidence of the toxic effects of Cr(III) so far, but Cr(VI) has carcinogenic activity, so the analysis of the chromine ions is very important in environmental research and the quality control of industry products. Usually Cr(III) and Cr(VI) interfere with each other in the species analysis, the measurement of Cr(VI) of numerous previous papers is related to the Cr(VI) samples, which contain a little Cr(III). When the amount of trivalent chromine exceeds ten …     

Determination of Trace Amounts of Palladium(II) by Solid-Phase Spectrophotometry

A simple and sensitive method for solid-phase spectrophotometric determination of palladium(II) at µgL^–1 level based on the reaction product of Pd²⁺ with disodium 1-nitroso-2-hydroxynaphthalene-3,6-disulphonate (Nitroso R salt) previously immobilized on Dowex 1×1 anion exchanger has been developed. The experimental factors (wavelength, pH, amount of resin, concentration of Pd²⁺ solution, volume of solution sample, equilibration time) were optimized. The advantages of this procedure as opposed to solution methods are discussed. The results obtained with synthetic solutions clearly indicate the suitability of the proposed method for real samples analysis.     

Some Arylidene-2-Pyridylhydrazone Derivatives as Reagents for Spectrophotometric Determination of Palladium (II)

Abstract

A method for spectrophotometric determination of palladium by complexation with Arylidene-2-pyridylhydrazone derivatives in 50% (V/V) ethanolic solution are described-Pd(II) forms a 1:1 complex with the reagents. Beer's law is obeyed over the range 0.2-6.5 μg ml^?1. The effect of pH, effect of excess reagent, stability of complexes as well as the tolerance amount of many metal ions have been reported. The method is applied, with fair accuracy, to the determination of pd(II) in synthetic solutions.     

Synthesis of New Reagent Benzyloxybenzaldehydethiosemicarbazone (BBTSC): Selective,Sensitive and Extractive Spectrophotometric Determination of Pd(II) in Water Samples and Synthetic Mixtures

A new reagent, benzyloxybenzaldehydethiosemicarbazone (BBTSC) was synthesized and a new method was developed for the simple, highly selective and extractive spectrophotometric determination of palladium(II) with BBTSC at wave length 365 nm. The metal ion formed a yellow colored complex with BBTSC in acetate buffer of pH 5.0, which was easily extractable into cyclohexanol with 1:1 (Metal: Ligand) composition. The method obeys Beer's law in the range of 5–60 ppm. The molar absorptivity and Sandell's sensitivity were found to be 0.4 × 10⁴ Lt. mol^?1 cm^?1 and 0.02661 μg cm^?2, respectively. The correlation co‐efficient of the Pd(II)‐BBTSC complex was 0.9657, which indicated an excellent linearity between the two variables. The repeatability of the method was checked by finding the relative standard deviation (RSD) (n = 10), which was 0.321% and its detection limit 0.016875 μg.mL^?1. The instability constant of the method was calculated by Asmus' method as 3.5714 × 10^?4. The interfering effect of various cations and anions were also studied. The proposed method was successfully applied for the determination of palladium(II) in synthetic and water samples. The results were compared with those obtained using an atomic absorption spectrophotometer, testing the validity of the method.     

2-(2-Thiazolylazo)-p-cresol(TAC) as a Reagent for the Spectrophotometric Determination of Lead(II)

Abstract

The reaction between lead(II) and 2-(2-Thiazolylazo)-p-Cresol(TAC) in the presence of TERGITOL NPX (4 mg/ml) at an apparent pH 9.0–10.0 results in an intensely colored complex which is stable for at least 4 hr.

The composition of the complex is 1:2 cation: TAC and the log of the formation constant is 11.92 ± 0. 40. Beer's law is obeyed up to 6.0μg.ml^?1 of lead(II) at 650nm.

The apparent molar absorptivity at 650 nm is 2.07 × 10⁴ 1. mole^?1.cm^?1 and the detection limit was obtained as 10.0 ng.ml^?1 of lead(II).

The method is applied to determination of lead(II) in copper-base alloy.     

微波消解-溶出伏安法对食品中铜、铅、镉的同时测定

采用微波消解结合同位镀汞阳极溶出伏安法对茶叶、紫菜和西洋菜等食品中的铜、铅、镉进行了测定,并优化了微波消解、电解缓冲液、富集电位等实验条件。采用标准加入法定量,Cu、Pb、Cd的线性范围分别为0.040~1.768、0.080~1.768、0.040~1.768 mg/L,相关系数分别为0.998 4、0.998 2、0.997 0,检出限分别为0.008、0.016、0.008 mg/L,相对标准偏差(n=5)分别为4.1%、0.92%、2.0%。该方法测定茶叶、紫菜、西洋菜等实际样品的铜、铅、镉含量,加标回收率分别为98%~109%、94%~103%、100%~112%;将测定结果与原子吸收光谱法检测结果对比,表明此方法简便、快速,且具有较高的灵敏度、较好的选择性和可靠性。     

2-[2-(4-甲基喹啉)-偶氮]-5-二乙氨基苯酚固相萃取光度法测定水和食品中的镉

研究了新试剂2[2(4甲基喹啉)偶氮]5二乙氨基苯酚(QADP)与镉的显色反应。在pH为8.0的硼酸氢氧化钠缓冲介质中,TritonX100存在下,QADP与镉反应生成2∶1稳定络合物。体系最大吸收波长λmax=590nm,摩尔吸光系数ε=1.56×105L·mol-1·cm-1。样品中的镉用强阴离子交换固相萃取柱固相萃取预分离和富集后用该方法测定,结果令人满意。     

Rapid and Sensitive Spectrophotometric Determination of Hafuium(IV) With 2-(5-Bromo-2-Pyridylazo)-5-Diethylaminophenol

Abstract

Hafnium(IV) reacts with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol in the pH range 3.3–11.0 to yield a sparingly soluble red-coloured chelate that can be dissolved with Triton X-100. Effect of initial pH of metal ion and order of addition of reagents was studied in detail. The 1:3 complex adheres to Beer's law over the concentration range 0.02–1.12 μg/ml of Hf(IV), has a molar absorptivity 1.33x10⁵ 1 mol^?1cm^?1, Sandell sensitivity 1.3 ng cm^?2, formation constant (log K) 11.94 and the method had a relative standard deviation of ± 1.5%. Effect of 60 diverse ions on the determination of hafnium(IV) was studied. This fairly selective method is the most sensitive so far reported for the spectrophotometric determination of hafnium(IV).     

Selective Determination of Trace Mercury (II) after Preconcentration with 4-(2-Pyridylazo)-Resorcinol-Modified Nanometer-Sized SiO2 Particles from Sample Solutions

A rapid, selective method that utilize 4-(2-Pyridylazo)-resorcinol (PAR)-modified nanometer SiO₂ (nanometer SiO₂–PAR) as a new solid-phase extractant for preconcentration of trace mercury (II) has been developed. The adsorption property of nanometer SiO₂–PAR for metal ions was studied by selectively extracting different metal ions from aqueous solutions. The results revealed an excellent affinity of the nanometer SiO₂–PAR for mercury (II) in presence of interfering metal ions at pH 4. The main parameters of solid-phase extraction such as shaking time, elution and sample dilution effect were studied. The extractant shows rapid kinetic sorption, and the adsorption equilibrium of mercury (II) on nanometer SiO₂–PAR was achieved in less than 2 min. The adsorbed mercury (II) was easily eluted by 4 mL of 6 mol L⁻¹ HCl. The maximum preconcentration factor was 50. The maximum static adsorption capacity was 276 μmol g⁻¹ at pH 4. The detection limit (3σ) was 0.43 μg L⁻¹ for cold vapor atomic absorption spectrometry (CVAAS), and the relative standard deviation of the eight replicate determinations was 2.4% for the determination of 2.0 μg of Hg(II) in 100 mL water sample. The method was applied to the determination of trace mercury (II) in sample solutions with satisfactory results.     

间羧基偶氮羧光度法测定痕量铬的研究

研究了间羧基偶氮羧与Cr2 O2 -7的褪色反应 ,建立了一种新的测定痕量Cr(VI)的光度方法 .发现其在高氯酸介质中具有高灵敏的褪色反应 ,摩尔吸收系数达到 3 .5× 10 6L/mol·cmCr(VI)量在 0～ 48μg范围内符合比尔定律     

催化动力学光度法测定痕量甲醛

基于在硫酸介质中,甲醛对溴酸钾氧化甲基橙褪色反应的催化作用,建立了测定痕量甲醛的催化动力学光度法。在选定的条件下,方法的线性范围为0~0.16 mg/L,表观摩尔吸光系数为1.18×105L.mol-1.cm-1,检出限为2.8μg/L。利用此法测定了饮料、废水和空气中的痕量甲醛,测定结果的相对标准偏差(RSD)小于5%(n=5),回收率为93%~106%,结果满意。     

Trace Spectrophotometric Determination of Dichlorvos using Diphenyl Semicarbazide (DPC) in Environmental and Agricultural Samples

A new and highly sensitive spectrophotometric method is developed for the determination of sub ppm levels of the widely used organophosphorus insecticide dichlorvos. The method is based on alkaline hydrolysis of dichlorvos to dichloroacetaldehyde followed by coupling with diphenyl semicarbazide (DPC) in alkaline medium. The absorption maxima of the wine red dye compound formed is measured at 490 nm. Beer's law is obeyed over the concentration range of 4.3 to 34 μg in a final solution volume of 25 mL (0.18–1.36 ppm). The molar absorptivity, Sandell's sensitivity and correlation coefficient were found to be 2.9 × 10⁵ l mole^?1 cm^?1, 0.013 μg cm^?2 and 0.9999, respectively. The standard deviation and relative standard deviation were found to be ± 0.007 and 1.90%, respectively. The lower limit of detection is 0.04 μg. The method is simple, sensitive and free from interferences of other pesticides and diverse ions. Other organophosphorous pesticides do not interfere with the proposed method. The method has been satisfactorily applied to the determination of dichlorvos in environmental and agricultural samples.     

微波消解-石墨炉原子吸收光谱法测定纸质食品包装材料中的痕量镉

建立了微波消解–石墨炉原子吸收光谱法测定纸质食品包装材料中痕量镉的检验方法。样品经微波消解后,以硝酸镍为基体改进剂,试验确定了石墨炉原子吸收法测定镉的最佳仪器条件。镉的质量浓度在0～10μg/L与吸收峰面积呈良好的线性关系,线性相关系数r=0.9997,检出限为0.025μg/L。将该法用于纸质食品包装材料中痕量镉的测定,并进行加标回收试验,回收率为96.0%～105.5%,相对标准偏差不大于4.4%(n=10)。     

Simple,Selective, and Sensitive Spectrophotometric Method for Determination of Trace Amounts of Nickel（Ⅱ）, Copper （Ⅱ）, Cobalt （Ⅱ）, and Iron （Ⅲ） with a Novel Reagent 2-Pyridine Carboxaldehyde Isonicotinyl Hydrazone

A selective and sensitive reagent of 2-pyridine carboxaldehyde isonicotinyl hydrazone（2-PYAINH） was synthesized and studied for the spectrophotometric determination of nickel, copper, cobalt, and iron in detail. At a pH value of 7.0, 9,0, 9.0, and 8.0, respectively, which greatly increased the selectivity; nickel, copper, cobalt, and iron reacted with 2-PYAINH to form a 1：2 yellow-orange, 1：2 yellow-green, 1：2 yellow and 1：1 yellow complexes, with absorption peaks at 363, 352, 346, and 359 nm, respectively. Under the optimal conditions, Beer＇s law was obeyed over the ranges of 0.01-1.4, 0.01-1.5, 0.01-2.7, and 0.01-5.4 mg/L respectively. The apparent molar absorptivity and Sandell＇s sensitivities were 8.4×10^4, 5.2×10^4, 7.1×10^4, and 3.9×10^4 L·mol^-l·cm^-1, respectively, and 0.00069, 0.0012, 0.00078, and 0.0014 μg·cm2, respectively. The detection limits were found to be 0.001, 0.002, 0.003, and 0.01 mg/L, respectively. The detailed study of various interfering ions to make the method more sensitive was carried out and selective and several real samples were analyzed with satisfactory results.     

经巯基葡聚糖凝胶分离富集的痕量铁的催化动力学光度法测定

经巯基葡聚糖凝胶分离富集的痕量铁的催化动力学光度法测定崔丽君，李慧芝，徐广通，申晓峰（山东建筑材料工业学院应用化学系济南２５００２２）关键词催化动力学光度法，巯基葡聚糖凝胶，铁（Ⅲ）用催化动力学方法测定痕量元素的报道日渐增多，对铁的测定已有报道［１～...