Motion of a cylinder in a viscous electroconductive medium with a magnetic field

The method of force sources is used to consider the planar problem of the motion of a circular cylinder in a viscous electroconductive medium with a magnetic field. The conventional and magnetic Reynolds numbers are assumed to be small. Expressions are obtained for the hydrodynamic reaction forces of the medium, acting on the moving cylinder. It is shown that as a result of the flow anisotropy in the medium, caused by the magnetic field, in addition to the resistance forces on bodies moving at an angle to the field, there are deflecting forces perpendicular to the velocity vector. The velocity field disturbances at great distances from the moving cylinder are determined.The problems of viscous electroconductive flow about solid bodies in the presence of a magnetic field constitute one of the divisions of magnetohydrodynamics. Motion of an electroconductive medium in a magnetic field gives rise to inductive electromagnetic fields and currents which interact with the velocity and pressure hydrodynamic fields in the medium [1, 2]. Under conditions of sufficiently strong interaction, the number of independent flow similarity parameters in MHD is considerably greater than in conventional hydrodynamics. This circumstance complicates the theoretical analysis of MHD flow about bodies, and therefore we must limit ourselves to consideration of individual particular flow cases.Here we consider the linear problem of the motion of an infinite circular cylinder in a viscous incompressible medium with finite electroconductivity located in a uniform magnetic field.There are many studies devoted to the flow of a viscous electroconductive medium with a magnetic field about solid bodies (see, for example, [3–5]). Because of this, some of the results obtained here include previously known results, which will be indicated below. In contrast to the cited studies, the examination is made by the method of force sources, suggested in [6]. This method permits obtaining integral equations for the distribution of the forces acting on the surface of the moving body. Their solution is obtained for small Reynolds and Hartmann numbers. Then the nature of the velocity disturbances at great distances from the body are determined. These results are compared with conventional viscous flow about a cylinder in the Oseen approximation.     

The effects of cactus inspired spines on the aerodynamics of a cylinder

The effect of cactus-like spines on the topology and the dynamics of the flow past a stationary or pivoted cylinder are experimentally studied. The experiments are performed either in a water channel or a wind tunnel at low to moderate Reynolds number (390–12 500). The instantaneous velocity field is recorded using TR-PIV and investigated for three different configurations: no spines, short spines (0.1D) and long spines (0.2D). The results show how the spines are able to slow the flow past the cylinder and then increase the recirculation area by up to 128% while the maximum fluctuating kinetic energy intensity is decreased by up to 35%. Moreover, the spines have a significant effect on the vortex shedding and the dynamic pressure at the surface of the cylinder, thus significantly reducing both the amplitude and the frequency at which a pivoted cylinder oscillates.     

Transient flow around an impulsively started cylinder using a dynamic mesh method

The finite volume method (FVM) with a dynamic mesh method (DMM) to deal with the moving boundary was applied to the simulation of two-dimensional incompressible viscous flow past a circular cylinder that is impulsively started into rotation and translation. The non-dimensional rotating to translating speed ratio α is varied from 0.28 to 2.07, with the Reynolds number being 200 for the range of α. The computation covers a period, during which the cylinder translates seven times its diameter. The current scheme handles the impulsively moving boundary directly by DMM, which is implemented using both mesh deforming and local remeshing. The instantaneous asymmetrical flow configurations for various α are presented and compared with the experimental visualizations. Quantitatively, the velocity distributions with drag and lift coefficients are also compared with the experimental and numerical results. Results show that the flow is strongly influenced by the rotation. Comparisons are found to be satisfactory.     

Free vibrations of an elastic cylinder in a cross flow and their effects on the near wake

Fluid-structure interactions resulting from the free vibrations of a two-dimensional elastic cylinder in a cross flow are not well understood. Experimental data pertaining to the interaction behavior is rather scarce, especially that related to the phenomenon of synchronization where the vortex shedding frequency is approximately equal to the natural frequency of the fluid-structure system. The present investigation attempts to examine this problem experimentally using a laser vibrometer to assess the bending displacements and a laser Doppler anemometer to measure the velocities in the wake. Experiments were carried out over a range of reduced velocities. The reduced velocity was first varied by using cylinders of different materials and then by changing the free stream velocity, while maintaining the cylinder diameter constant. A proper choice of materials and reduced velocity allowed the synchronization phenomenon to be investigated. For the range of reduced velocity investigated, the vibration amplitude of the cylinder is finite, even at synchronization, and increases with reduced velocity. The results further show that more than one mode of vibration is excited away from synchronization; however, only the first mode is evident at synchronization. In addition, the near-wake flow behind the elastic cylinder, at three different Reynolds numbers in the sub-critical range, was measured in detail and the data was used to analyse the vibration effects on the mean and turbulence field compared to those measured behind a relatively rigid cylinder at the same Reynolds numbers. It is found that cylinder vibrations have little or no effect on the mean drag and the normalized mean field. However, cylinder vibrations enhance turbulent mixing, thus resulting in a substantial increase in the turbulent intensities. This implies that the large-scale vortical motion is also affected. Nevertheless, turbulence structure in the inertial sub-range is not affected by cylinder vibrations. The slopes of the velocity spectra in this range is still measured to be −5/3 for the freely vibrating cylinders investigated. Received: 20 December 1998/Accepted: 20 September 1999     

A comparison of tracer and PIV results in visualizing water flow around a cylinder close to the free surface

 Sheridan et al. (1997) have recently published particle-image-velocimetry (PIV) results showing water flow patterns around a cylinder at various values of shallow immersion. These results have been compared with a turbulent-flow tracer study of some of the same flow configurations. In shallow-immersion cylinder comparison tests, the streaklines of the tracer technique offer a virtually identical impression of the principal flow characteristics when compared with the PIV velocity vectors. Received: 30 March 1998/Accepted: 9 April 1999     

Laminar viscous flow through regular arrays of parallel solid cylinders

Solutions are found for the Stokes equations of motion for a viscous fluid flowing either parallel or perpendicular to the axes of cylinders in square, rectangular, triangular and hexagonal arrays. This is done by matching a solution outside one cylinder to a sum of solutions with equal singularities inside every cylinder of an infinite array. Some of the terms in the solution are indeterminate but these indeterminacies are resolved. The resulting solutions are several terms of a power series in the density.High density approximations are found for the longitudinal case when the cylinders overlap.For low densities the mean velocity for transverse flow found to be independent of orientation of the array and is half the mean velocity for parallel flow in the same pressure field to several orders of magnitude of the volume concentration of cylinders.     

Mixed convection cooling of a heated circular cylinder by laminar upward-directed slot jet impingement

An experimental and numerical study has been carried out to investigate the heat transfer characteristics of a horizontal circular cylinder exposed to a slot jet impingement of air. A square-edged nozzle is mounted parallel with the cylinder axis and jet flow impinges on the bottom of the cylinder. The study is focused on low Reynolds numbers ranging from 120 to 1,210, Grashof numbers up to Gr = 10Re ² and slot-to-cylinder spacing from 2 to 8 of the slot width. The flow field is greatly influenced by the slot exit velocity and the buoyancy force due to density change. A Mach–Zehnder Interferometer is used for measurement of local Nusselt number around the cylinder at 10° interval. It is observed that the average Nusselt number decreases with increasing the jet spacing and increases with rising the Reynolds number. A finite volume method utilizing a curvilinear coordinate transformation is used for numerical modeling. The numerical results show good agreement with the experimental results. The flow and thermal field are seen to be stable and symmetric around the cylinder over the range of parameters studied.     

Simulation of cross-flow-induced vibration of cylinder arrays by surface vorticity method

The surface vorticity method (SVM), which is a fast and practical grid-free two-dimensional (2-D) method, and a fluid–structure interaction model incorporating the effects of cylinder motions and displacements is used to simulate the vortex-induced vibration of cylinder arrays at sub-critical Reynolds number Re=2.67×10⁴. The SVM is found to be most suitable for simulating a 2-D cylinder row with large-amplitude vibrations where the vorticity field and the fluid forces of the cylinder row change drastically, and the effect of the stream on the transverse direction vibration is very significant. The fluidelastic instability of a flexible cylinder row at small pitch ratio is also investigated, and the critical reduced velocity of the cylinder row at a reduced damping parameter S_G=1.29 is calculated, which is in good agreement with experimental and analytical results of the unsteady model. Vortex-induced vibration of a staggered cylinder array is simulated using different structural parameters. When the cylinders are relatively more flexible, the flow pattern changes dramatically and the fluid–structure interaction has a dominant impact on the flow field. Compared with grid-based methods, the grid-free SVM is a fast and practical method for the simulation of the FIV of cylinder arrays due to vortex shedding at sub-critical Reynolds numbers.     

Vortex shedding from a square cylinder in presence of a moving wall

A numerical study on the flow past a square cylinder placed parallel to a wall, which is moving at the speed of the far field has been made. Flow has been investigated in the laminar Reynolds number (based on the cylinder length) range. We have studied the flow field for different values of the cylinder to wall separation length. The governing unsteady Navier–Stokes equations are discretized through the finite volume method on a staggered grid system. A SIMPLE type of algorithm has been used to compute the discretized equations iteratively. A shear layer of negative vortex generates along the surface of the wall, which influences the vortex shedding behind the cylinder. The flow‐field is distinct from the flow in presence of a stationary wall. An alternate vortex shedding occurs for all values of gap height in the unsteady regime of the flow. The strong positive vortex pushes the negative vortex upwards in the wake. The gap flow in the undersurface of the cylinder is strong and the velocity profile overshoots. The cylinder experiences a downward force for certain values of the Reynolds number and gap height. The drag and lift are higher at lower values of the Reynolds number. Copyright © 2005 John Wiley & Sons, Ltd.     

Numerical solution for the flow of viscoelastic fluids around an inclined circular cylinder.

Finite difference solutions have been obtained by the perturbation method to investigate the influence of shear thinning and elasticity on the flow around an inclined circular cylinder of finite length in a uniform flow. In this numerical analysis a generalized upper-convected Maxwell model, in which the viscosity changes according to the Cross model, has been used.The local flow over the cylinder is only slightly deflected. However, in the wake flow behind the cylinder the particle path is remarkably influenced by the axial flow and rapidly flows up parallel to the cylinder's axis. Then it gradually rejoins direction of the incoming flow. It is found that viscoelastic fluids are prone to flow axially in the vicinity of the cylinder. The numerical predictions generally agree with the flow visualization results.The numerical solutions also demonstrate that elasticity has a strong effect on the velocity profile especially around both ends of the cylinder; elasticity increases the asymmetric profiles of both circumferential velocity and axial velocity with respect to equal to 90° and decreases a difference in the circumferential velocity between the windward end and the leeward end.For non-Newtonian fluids, the length of the wake flow is influenced by not only the Reynolds number but also the cylinder diameter and it is larger for the cylinder with the smaller diameter at the same Reynolds number.Partly presented at the 9th Australasian Fluid Mechanics Conference, University of Auckland, New Zealand, 8–12 December, 1986     

幂律流体圆柱绕流的格子波尔兹曼模拟简

基于插值补充格子波尔兹曼方法和幂律流体的本构方程,建立了贴体坐标系下适用于幂律流体的格子波尔兹曼模型,模拟了幂律流体的圆柱绕流问题,采用非平衡外推格式处理圆柱表面的速度无滑移边界,利用应力积分法确定曳力系数和升力系数,并与基于标准的格子波尔兹曼方法和有限容积法获得的数值数据进行对比,吻合良好. 进行了网格无关性验证之后,分析了稳态流动时,不同雷诺数下幂律指数对于尾迹长度、分离角、圆柱表面黏度分布、表面压力系数及曳力系数的影响,以及非定常流动中,幂律指数对于流场、曳力系数、升力系数和斯特劳哈尔数的影响. 获得的变化规律与基于其他数值模拟方法得到的结果相一致,充分验证了模型的有效性和正确性. 结果表明：插值补充格子波尔兹曼方法可以用来模拟幂律流体在具有复杂边界流场内的流动问题,通过引入不同的非牛顿流体本构方程,该方法还可以进一步应用于其他类型的非牛顿流体研究中.     

平面剪切来流作用下串列布置三圆柱流致运动特性研究

基于四步半隐式特征线分裂算子有限元方法,对Re=100时,剪切来流作用下串列三圆柱体双自由度流致振动问题进行了数值计算. 首先,与现有文献结果进行对比验证该方法的正确性. 然后,着重分析剪切率、固有频率比和折减速度三个关键参数对串列三圆柱体结构流致动力响应及流场特性的影响. 数值计算结果表明:剪切率、固有频率比与折减速度对结构振幅和运动轨迹的影响较大. 随剪切率的增大,上游圆柱最大振幅的变化与单圆柱工况类似. 中下游圆柱最大振幅会增大且会出现双向共振现象,同时,发生共振响应区域会扩大. 随固有频率比的增大,上游圆柱顺流向锁定区间范围会减小,而中下游圆柱双向锁定区间会扩大. 另一方面,均匀来流作用下,结构运动轨迹以"8"字形和不规则形状为主. 随剪切率的增大,锁定区间内运动轨迹会由"8"字形转变为"雨滴"形. 在大剪切率与高固有频率比工况下,中游圆柱体结构运动轨迹会出现"双雨滴"形状. 最后,通过对流场特性的分析,揭示了剪切来流作用下串列三圆柱结构流致运动响应的内在机理.      

幂律流体圆柱绕流的格子波尔兹曼模拟

基于插值补充格子波尔兹曼方法和幂律流体的本构方程,建立了贴体坐标系下适用于幂律流体的格子波尔兹曼模型,模拟了幂律流体的圆柱绕流问题,采用非平衡外推格式处理圆柱表面的速度无滑移边界,利用应力积分法确定曳力系数和升力系数,并与基于标准的格子波尔兹曼方法和有限容积法获得的数值数据进行对比,吻合良好. 进行了网格无关性验证之后,分析了稳态流动时,不同雷诺数下幂律指数对于尾迹长度、分离角、圆柱表面黏度分布、表面压力系数及曳力系数的影响,以及非定常流动中,幂律指数对于流场、曳力系数、升力系数和斯特劳哈尔数的影响. 获得的变化规律与基于其他数值模拟方法得到的结果相一致,充分验证了模型的有效性和正确性. 结果表明:插值补充格子波尔兹曼方法可以用来模拟幂律流体在具有复杂边界流场内的流动问题,通过引入不同的非牛顿流体本构方程,该方法还可以进一步应用于其他类型的非牛顿流体研究中.      

The Slip Velocity at the Edge of a Porous Medium: Effects of Interior Resistance and Interface Curvature

Singularity methods are used to analyze creeping planar flow in the annulus between concentric cylinders, when a portion of the annulus is filled with an array of regularly spaced rods adjacent to the inner cylinder. The rods are evenly spaced on concentric circles, and the circles are spaced such that the array resembles a square lattice bent into a circle. The rods and inner cylinder are stationary, and steady rotation of the outer cylinder generates the flow. The quantity of interest is the slip velocity, the mean velocity at the interface between the array and the unfilled portion of the annulus. The primary part of the study concerns the influence of the interior rods on the interfacial velocity, and to this end the velocity is found as successive circles of rods are removed, starting with the circle closest to the inner cylinder. The calculations are carried out for solid volume fractions from 0.0001 to 0.1, and these show that the slip velocity is virtually unchanged as the interior circles of rods are removed, until only one circle remains and then the velocity is of order 10% larger than that for the full array. Hence the velocity at the edge of a sparse porous medium depends minimally on the hydrodynamic resistance of the obstacles in the interior. In the secondary part of the study, it is found that curvature of the interface does not influence the velocity there.     

Development of a hybrid finite volume/element solver for incompressible flows

In this paper, we report our development of an implicit hybrid flow solver for the incompressible Navier–Stokes equations. The methodology is based on the pressure correction or projection method. A fractional step approach is used to obtain an intermediate velocity field by solving the original momentum equations with the matrix‐free implicit cell‐centred finite volume method. The Poisson equation derived from the fractional step approach is solved by the node‐based Galerkin finite element method for an auxiliary variable. The auxiliary variable is closely related to the real pressure and is used to update the velocity field and the pressure field. We store the velocity components at cell centres and the auxiliary variable at cell vertices, making the current solver a staggered‐mesh scheme. Numerical examples demonstrate the performance of the resulting hybrid scheme, such as the correct temporal convergence rates for both velocity and pressure, absence of unphysical pressure boundary layer, good convergence in steady‐state simulations and capability in predicting accurate drag, lift and Strouhal number in the flow around a circular cylinder. Copyright © 2007 John Wiley & Sons, Ltd.     

Experimental investigation of the flow-induced vibration of a curved cylinder in convex and concave configurations

Experiments have been conducted to investigate the two-degree-of-freedom vortex-induced vibration (VIV) response of a rigid section of a curved circular cylinder with low mass-damping ratio. Two curved configurations, a concave and a convex, were tested regarding the direction of the flow, in addition to a straight cylinder that served as reference. Amplitude and frequency responses are presented versus reduced velocity for a Reynolds number range between 750 and 15 000. Results for the curved cylinders with concave and convex configurations revealed significantly lower vibration amplitudes when compared to the typical VIV response of a straight cylinder. However, the concave cylinder showed relatively higher amplitudes than the convex cylinder which were sustained beyond the typical synchronisation region. We believe this distinct behaviour between the convex and the concave configurations is related to the wake interference taking place in the lower half of the curvature due to perturbations generated in the horizontal section when it is positioned upstream. Particle-image velocimetry (PIV) measurements of the separated flow along the cylinder highlight the effect of curvature on vortex formation and excitation revealing a complex fluid–structure interaction mechanism.     

旋转圆柱绕流流场特性分析

对雷诺数Re = 20000 ~ 90000、相对转速ɑ = 0 ~ 0.72的旋转圆柱后方流场进行了实验测量, 分析了旋转圆柱后方不同剖面处的速度分布规律和湍流度分布规律. 采用LES方法对旋转圆柱绕流问题进行了数值模拟, 分析旋转圆柱周围流场特性和自由剪切层变化规律, 最后通过理论模型对流场变化进行分析, 得出如下结论: 当圆柱逆时针旋转时, 同一雷诺数下随着相对转速的增加, 旋转圆柱尾迹区域下方速度突变处的位置随着相对转速的增加而上移, 而上方速度突变处的位置不变, 雷诺数的增加使旋转圆柱尾迹区域下方速度突变处位置有小幅度的下移. 通过数值模拟发现, 圆柱旋转之后, 圆柱后方下侧涡的位置明显上移, 且幅度较大. 下方的自由剪切层有明显的上移, 上方的自由剪切层位置变化较小. 最后通过理论分析发现, 圆柱后侧下方涡位置的上移对圆柱升力影响十分显著, 在高雷诺数、低相对转速的条件下, 旋转圆柱后侧下方涡位置的改变对旋转圆柱的升力、尾流区自由剪切层的变化起到了重要的影响.      

AN EVALUATION OF THE BOUNCE-BACK BOUNDARY CONDITION FOR LATTICE BOLTZMANN SIMULATIONS

The bounce-back boundary condition for lattice Boltzmann simulations is evaluated for flow about an infinite periodic array of cylinders. The solution is compared with results from a more accurate boundary condition formulation for the lattice Boltemann method and with finite difference solutions. The bounce-back boundary condition is used to simulate boundaries of cylinders with both circular and octagonal cross-sections. The convergences of the velocity and total drag associated with this method are slightly sublinear with grid spacing. Error is also a function of relaxation time, increasing exponentially for large relaxation times. However, the accuracy does not exhibit a trend with Reynolds number between 0·1 and 100. The square lattice Boltzmann grid conforms to the octagonal cylinder but only approximates the circular cylinder, and the resulting error associated with the octagonal cylinder is half the error of the circular cylinder. The bounce-back boundary condition is shown to yield accurate lattice Boltzmann simulations with reduced computational requirements for computational grids of 170×170 or finer, a relaxation time less than 1·5 and any Reynolds number from 0·1 to 100. For this range of parameters the root mean square error in velocity and the relative error in drag coefficient are less than 1 per cent for the octagonal cylinder and 2 per cent for the circular cylinder. © 1997 John Wiley & Sons, Ltd.     

Averaged fluid velocities near a cylinder in turbulent flow in an open channel: Experiment

The results of experiments in which a circular cylinder located near the bottom of a rectangular channel was exposed to transverse statistically stationary turbulent subcritical flow with free surface are presented. The particle image velocimetry (PIV) was used to obtain data on the averaged velocity field near the cylinder. The gradients of the longitudinal velocity component were used to determine the shear stresses on the bottom of the channel. It is shown that the presence of the cylinder in the flow causes considerable averaged vertical velocities and a significant change in the shear stresses on the bottom of the channel.