Ligand-free Sonogashira coupling reactions with heterogeneous Pd/C as the catalyst

A variety of aryl iodides were coupled with aromatic and aliphatic terminal alkynes to give the corresponding 1,2-disubstituted aromatic alkynes in good yields by using only 0.4 mol % of the heterogeneous 10 % Pd/C as the catalyst without a ligand, copper salt, or amine in an aqueous medium.     

Pd nanoparticles supported on amphiphilic porous organic polymer as an efficient catalyst for aqueous hydrodechlorination and Suzuki-Miyaura coupling reactions

Developing efficient and recyclable heterogeneous catalysts for organic reactions in water is important for the sustainable development of chemical industry. In this work, Pd nanoparticles supported on DABCO-functionalized porous organic polymer was successfully prepared through an easy copolymerization and successive immobilization method. Characterization results indicated that the prepared catalyst featured big surface area, hierarchical porous structure, and excellent surface amphiphilicity. We demonstrated the use of this amphiphilic catalyst in two case reactions, i.e. the aqueous hydrodechlorination and Suzuki-Miyaura coupling reactions. Under mild reaction conditions, the catalyst showed high catalytic activities for the two reactions. In addition, the catalyst could be easily recovered and reused for several times. Also, no obvious Pd leaching and aggregation of Pd nanoparticles occurred up during the consecutive reactions.     

Effective heterogeneous palladium catalysis of the reactions of organoboron compounds with aryl halides

Reactions of [Ph₄B]Na and ArB(OH)₂ with aryl halides are effectively catalyzed by heterogeneous palladium catalysts (PdCl₂C, Pd(0)/C, and palladium black) to give cross-coupling products in high yields. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1399–1401, July, 1997.     

The effect of hydrogen bonding on allylic alkylation and isomerization reactions in ionic liquids

Neutral allylic alkylation reactions, in which a base is generated in situ and which hence require no external bases, can significantly be retarded when carried out in the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF(4)]). Evidence suggests that the base or base precursor enters into hydrogen bonding with the imidazolium cation and is thus made less readily available for deprotonation of pre-nucleophiles. However, the reaction proceeds well in the presence of stronger bases that are capable of deprotonation. Whilst the phenomenon of hydrogen bonding in ionic liquids can be detrimental to reactions such as allylic alkylation, it can be exploited to suppress unwanted allylic isomerization.     

Pd-catalyzed asymmetric allylic substitution reactions using P-chirogenic diaminophosphine oxides: DIAPHOXs

This paper describes the development of a new class of chiral phosphorus ligand: aspartic acid-derived P-chirogenic diaminophosphine oxides, DIAPHOXs, and their application to several Pd-catalyzed asymmetric allylic substitution reactions. Pd-catalyzed asymmetric allylic alkylation was initially examined in detail using diaminophosphine oxides 1a, resulting in the highly enantioselective construction of quaternary stereocenters. Mechanistic investigations revealed that 1a is activated by N,O-bis(trimethylsilyl)acetamide-induced tautomerization to afford a trivalent diamidophosphite species 12, which functions as the actual ligand. Furthermore, asymmetric allylic amination was examined using Pd-DIAPHOX catalyst systems, providing a variety of chiral allylic amines.     

Screening of a phosphite-phosphoramidite ligand library for palladium-catalysed asymmetric allylic substitution reactions: the origin of enantioselectivity

We have designed a new library of readily available, highly modular phosphite-phosphoramidite ligands for asymmetric allylic substitution reactions. They are easily prepared in one step from commercially available chiral 1,2-amino alcohols. The introduction of a phosphoramidite moiety into the ligand design is highly advantageous for the product outcome. This ligand library affords high reaction rates (TOFs of up to 800 mol (mol h)(-1)) and enantioselectivities (ees of up to 99%) and, at the same time, contains a broad range of disubstituted hindered and unhindered substrate types. NMR study of the Pd-pi-allyl intermediates provide a deeper understanding of the effect of the ligand parameters on the origin of enantioselectivity.     

Highly selective palladium catalyzed kinetic resolution and enantioselective substitution of racemic allylic carbonates with sulfur nucleophiles: asymmetric synthesis of allylic sulfides,allylic sulfones,and allylic alcohols

We describe the highly selective palladium catalyzed kinetic resolutions of the racemic cyclic allylic carbonates rac-1 a-c and racemic acyclic allylic carbonates rac-3 aa and rac-3 ba through reaction with tert-butylsulfinate, tolylsulfinate, phenylsulfinate anions and 2-pyrimidinethiol by using N,N'-(1R,2R)-1,2-cyclohexanediylbis[2-(diphenylphosphino)-benzamide] (BPA) as ligand. Selectivities are expressed in yields and ee values of recovered substrate and product and in selectivity factors S. The reaction of the cyclohexenyl carbonate 1 a (>/=99 % ee) with 2-pyrimidinethiol in the presence of BPA was shown to exhibit, under the conditions used, an overall pseudo-zero order kinetics in regard to the allylic substrate. Also described are the highly selective palladium catalyzed asymmetric syntheses of the cyclic and acyclic allylic tert-butylsulfones 2 aa, 2 b, 2 c, 2 d and 4 a-c, respectively, and of the cyclic and acyclic allylic 2-pyrimidyl-, 2-pyridyl-, and 4-chlorophenylsulfides 5 aa, 5 b, 5 ab, 6 aa-ac, 6 ba and 6 bb, respectively, from the corresponding racemic carbonates and sulfinate anions and thiols, respectively, in the presence of BPA. Synthesis of the E-configured allylic sulfides 6 aa, 6 ab, 6 ac and 6 bb was accompanied by the formation of minor amounts of the corresponding Z isomers. The analogous synthesis of allylic tert-butylsulfides from allylic carbonates and tert-butylthiol by using BPA could not be achieved. Reaction of the cyclopentenyl esters rac-1 da and rac-1 db with 2-pyrimidinethiol gave the allylic sulfide 5 c having only a low ee value. Similar results were obtained in the case of the reaction of the cyclohexenyl carbonate rac-1 a and of the acyclic carbonates rac-3 aa and rac-3 ba with 2-pyridinethiol and lead to the formation of the sulfides 5 ab, 6 ab, and 6 bb, respectively. The low ee values may be ascribed to the operating of a "memory effect", that is, both enantiomers of the substrate give the substitution product with different enantioselectivities. However, in the reaction of the racemic carbonate rac-1 a as well as of the highly enriched enantiomers 1 a (>/=99 % ee) and ent-1 a (>/=99 % ee) with 2-pyrimidinethiol the ee values of the substrates and the substitution product remained constant until complete conversion. Similar results were obtained in the reaction of the cyclic carbonates rac-1 a, ent-1 a (>/=99 % ee) and ent-1 c (>/=99 % ee) with lithium tert-butylsulfinate. Thus, in the case of rac-1 a and 2-pyrimidinthiol and tert-butylsulfinate anion as nucleophiles the enantioselectivity of the substitution step is, under the conditions used, independent of the chirality of the substrate; this shows that no "memory effect" is operating in this case. Hydrolysis of the carbonates ent-1 a-c, ent-3 aa and ent-3 ba, which were obtained through kinetic resolution, afforded the enantiomerically highly enriched cyclic allylic alcohols 9 a-c (>/=99 % ee) and acyclic allylic alcohols 10 a (>/=99 % ee) and 10 b (99 % ee), respectively.     

Dicyano-Functionalized MCM-41-Supported Palladium Complex as An Efficient Catalyst for Allylation of Aldehydes and Ketones

Dicyano-functionalized MCM-41-supported palladium complex was prepared from dicyano-functionalized MCM-41 and palladium chloride. This complex exhibited high catalytic activity in the allylation of aldehydes and ketones with allylic chlorides in the presence of SnCl2. This polymeric palladium complex can be recovered and reused without noticeable loss of activity.     

Modular phosphite-oxazoline/oxazine ligand library for asymmetric pd-catalyzed allylic substitution reactions: scope and limitations-origin of enantioselectivity

A library of phosphite-oxazoline/oxazine ligands L1-L15 a-h has been synthesized and screened in the Pd-catalyzed allylic substitution reactions of several substrate types. These series of ligands can be prepared efficiently from easily accessible hydroxyl amino acid derivatives. Their modular nature enables the substituents/configurations in the oxazoline/oxazine moiety, alkyl backbone chain and in the biaryl phosphite moiety to be easily and systematically varied. By carefully selecting the ligand components, therefore, high regio- and enantioselectivities (ee values up to 99 %) and good activities have been achieved in a broad range of mono- and disubstituted linear hindered and unhindered liner and cyclic substrates. The NMR studies on the Pd-pi-allyl intermediates provide a deeper understanding about the effect of the ligand parameters on the origin of enantioselectivity. It also indicates that the nucleophilic attack takes place predominantly at the allylic terminal carbon atom located trans to the phosphite moiety.     

Small Pd nanoparticles supported in large pores of mesocellular foam: an excellent catalyst for racemization of amines

Highly dispersed palladium nanoparticles (1–2 nm) supported in large‐pore mesocellular foam (MCF; 29 nm) were synthesized. The Pd‐nanocatalyst/MCF system was characterized by transmission electron microscopy (TEM), powder X‐ray diffraction (XRD) and X‐ray photoelectron spectroscopy (XPS). The performance of the Pd nanocatalyst obtained was examined for amine racemization. The Pd nanocatalyst showed higher activity and selectivity toward racemization of (S)‐1‐phenylethyl amine than any other amine racemization catalyst reported so far and it could be reused several times. Our data from TEM and XRD suggest a restructuring of the Pd nanocatalyst from amorphous to crystalline and an increase in Pd nanocatalyst size during the racemization reaction. This led to an unexpected increase of activity after the first use. The Pd nanocatalyst obtained can be integrated with other resolving processes of racemic organic compounds to increase the yield of chiral organic products.     

Celite‐Polyaniline supported palladium catalyst for chemoselective hydrogenation reactions

Polyaniline coated on particles of celite is used as support to load palladium catalyst. This heterogenized Celite?PANI?Pd system, is used as an efficient catalyst for chemoselective hydrogenation reactions. The catalyst is characterized by usual spectral, analytical techniques and studied for hydrogenation reactions at ambient conditions. The mild reaction conditions allow the control over the reactions and excellent selectivity is achieved in number of conversions. Hydrogenation of a carbon–carbon double bond was favored over other polar π‐bond systems, while labile functional groups such as benzyl ether, benzyl esters, cyano, nitro and halogen remained unaffected. Primary amines were converted to N,N‐dimethyl amines with formaldehyde, the double bond of coumarin was selectively hydrogenated without opening of the lactone functionality.     

Use of allyl, 2-tetrahydrofuryl, and 2-tetrahydropyranyl ethers as useful C3-, C4-, and C5-carbon sources: palladium-catalyzed allylation of aldehydes

Palladium-diethylzinc or palladium-triethylborane catalytically promotes self-allylation of 2-(allyloxy)tetrahydrofurans, 2-(allyloxy)tetrahydropyrans, and their hydroxy derivatives on the rings (ribose, glucose, mannose, deoxyribose, deoxyglucose). All the reactions proceed at room temperature and provide polyhydroxyl products, sharing a structural motif of a homoallyl alcohol, in good to excellent yields with high levels of stereoselectivity. Useful C3-unit elongation, which makes the best use of an allyl ether as a protecting group and a nucleophilic allylation agent, is demonstrated. Mechanisms for the umpolung reaction (of an allyl ether into an allylic anion) and stereoselectivity associated with allylation of aldehydes are discussed.     

A new magnetically recoverable heterogeneous palladium catalyst for phosphonation reactions in aqueous micellar solution

A new heterogeneous palladium complex of 2‐aminothiophenol supported on nanomagnetic γ‐Fe₂O₃ was synthesized and characterized using various methods. The catalyst was used as a magnetically recoverable heterogeneous palladium catalyst for phosphonation reactions via C ? P bond formation. Using this method, a wide range of electrophilic benzenes was coupled successfully with phosphite esters (triethyl/tri‐isopropyl/triphenylphosphite and diethyl/di‐isopropyl/diphenylphosphite) in aqueous micellar solution to generate the corresponding arylphosphonates in good to high yields. The catalyst was separated using an external magnet and reused for six consecutive cycles without any significant loss of its reactivity. Copyright © 2015 John Wiley & Sons, Ltd.