Generation of a high-quality partially coherent dark hollow beam with a multimode fiber

We report the experimental generation of a high-quality partially coherent dark hollow beam (DHB) by coupling a partially coherent beam into a multimode fiber (MMF) with a suitable incidence angle. The interference experiment of the generated partially coherent DHB passing through double slits is demonstrated. It is found that the coupling efficiency of the MMF, the quality, and the coherence of the generated partially coherent DHB are closely controlled by the coherence of the input beam.     

Displacements and deformations of a vortex light beam produced by the diffraction grating with embedded phase singularity

Properties of vortex light beams produced by a diffraction grating with groove bifurcation (“fork” structure) are studied in the case of small diffraction angles. Analytical expressions are derived for the amplitude distribution of a diffracted beam generated from an incident Gaussian beam with arbitrary radius and wavefront curvature, transversely shifted and inclined with respect to the nominal axis (normal to the grating crossing it at the bifurcation point). In such situations, the output beam becomes asymmetric; the optical vortex core and the intensity maximum displace orthogonally to the incident beam shift direction. The nearest vicinity of the vortex core preserves its circular symmetry and the optical vortex remains locally isotropic. The effects of misalignment depend on the incident beam characteristics, the diffraction order and the propagation distance behind the grating. Experimental measurements support the results of calculations.     

Fiber-optic beam shaper based on multimode interference

A new method of fiber-optic based beam shaping is investigated both numerically and experimentally. A cylindrically symmetric method of lines (MoLs) is developed to simulate the device. The device is fabricated by fusion splicing a predetermined length of multimode fiber (MMF) to a single-mode fiber. The multimode interference (MMI) effects create ring-shaped field profiles at certain positions inside the MMF. The shaped beam can be used in medical applications requiring particular irradiation patterns.     

直线感应加速器束心偏移轨迹的计算

给出了直线感应加速器在磁体失准情况下电子束质心运动轨迹的计算机模型.利用坐标变换求磁体失准后的三维磁场分布,并采用束包络方程和束心偏移方程耦合求解的方法计算束心的运动轨迹.磁体失准度与束流质心偏移的定量关系的计算研究对磁体安装定位及校正线圈使用是有意义的.     

涡旋光束与相位全息光栅不对准时的衍射特性研究

研究了涡旋光束与相位全息光栅不对准时衍射光束的解析特性.利用理论推导的方法得出涡旋光束经相位全息光栅接收后一阶衍射光束的解析表达式.然后通过仿真分析分别得出在发生正常对准、横向偏移、角向倾斜及横向偏移和角向倾斜两者同时出现时衍射光束的质心偏移特性和中心强度变化特性.研究表明: 拉盖尔-高斯光束经相位全息光栅衍射后得到的光场表达式为合流超几何函数形式.光束与相位全息光栅间的不对准会引起衍射光束质心的偏移,而且光束质心的偏移量随入射光束偏移距离和偏离角的增加而增加,与入射光束的偏移方向和方位角无关.角向倾斜时 关键词： 拉盖尔-高斯光束 相位全息光栅 横向偏移 角向倾斜     

Variation of the speckle contrast in a graded-index fibre by misalignment of the incident beam

The speckle pattern observed at the output end of a multimode fibre is closely related to the modal noise. In this paper, the average contrast of the speckle pattern is studied as a function of the radial position in the output end plane for three kinds of misalignment of the incident beam, i.e. defocusing, axial misalignment and angular misalignment. It is found that a variation of the speckle contrast is very sensitive to all kinds of misalignment of the incident beam and that its varying form strongly depends on the kind of misalignment of the incident beam. The speckle contrast at the centre of the output end plane is also examined as a function of the magnitude of misalignment. It is found that the contrast increases from a minimum value in the correct alignment to a certain saturated value with an increase of misalignment.     

Generalized beams in ABCDGH systems

For a generalized beam at the source plane passing through co-located aperture and a propagation path consisting of an off-axis x-y asymmetric ABCDGH system, the receiver plane irradiance expression is derived using the Collins integral. A collection of source beam profiles that are obtainable from the generalized beam formulation are illustrated. Plots are given for viewing the progress of selected generalized beam types along the propagation axis, containing a single thin lens, co-centric and misaligned in the x-direction. The received power falling onto a finite aperture surface is calculated for various misalignment situations.     

扩束准直光学系统中光学元件失调对高斯光束传输变换的影响分析

基于广义惠更斯-菲涅尔衍射积分公式, 以高斯光束为激光束模型,推导了激光光束通过失调扩束准直光学系统的传输公式,分析了光学元件失调对扩束准直光学系统输出光束传输特性的影响,并在此基础上进行了仿真。实验结果表明,高斯光束通过失调扩束准直光学系统时,出射光束变为偏心高斯光束,光学元件失调程度越大,输出光束越偏离光轴,光束质量越差。在同样的失调下,长焦距光学元件对输出光束影响更大,因此在激光扩束准直光学系统中,调整长焦距光学元件更为重要。     

利用特征向量法分析有源失调腔的2维模场

 利用一种用于光腔模式及光束传输模拟计算的特征向量法计算有源腔的2维失调,通过对谐振腔几何关系的求解,以及对增益进行薄层模型处理,最后利用特征向量法计算有源腔失调后的模式分布,发现失调造成了模式强度分布不均匀,并带来模式阶数的改变。计算了相应的光束质量因子,结果表明:在一定失调范围内,失调可能会带入新的模式竞争;谐振腔在一定范围的失调情况下,各阶模式的光束质量可能变好,也有可能变差,随着模式阶数的增加光束质量整体趋势是越来越差;原来简并的模式可能不再简并。该方法可以为计算失调后谐振腔的模场带来方便。     

Observation of collimation and decollimation of an atomic beam in a misaligned standing wave

This paper reports an experimental study on the collimation and decollimation of an atomic beam in a misaligned standing wave, in which the effective detuning caused by the Doppler effect is affected by the longitudinal velocity of the atomic beam. The experiment shows that in a strong field with red detuning between laser field and atomic transition frequency, laser heating in a normal standing wave becomes laser cooling in a misaligned standing wave for an approriate misalignment angle. For blue detuning, laser cooling in a standing wave can also become laser heating in a misaligned standing wave for an appropriate condition. These results ca be used in controling atomic motion.     

Gyrokinetics of Coaxial-Cavity Electron Cyclotron Maser

Based on the gyrokinetics of free-electron masers, the energy-transfer rate and starting current are derived for a coaxial-cavity electron cyclotron maser (gyrotron oscillator) with the misalignment of the inner-rod axis to the outer-cavity axis taken into account. The effect of the finite cavity length is included in the derivation. The stable term of the instability which results from the contribution of the guiding-center distribution is of significance, although it is usually neglected in a cylindrical-cavity gyrotron. It is found that the structure misalignment has more serious influence on the performance of the coaxial cavity gyrotron than the beam misalignment.     

同轴腔自由电子回旋脉塞的输出功率

 介绍了同轴腔自由电子回旋脉塞输出功率受电子束错位的影响,并就德国卡鲁斯研究中心(FZK)正在建造的波长为2mm、输出功率为1.5MW的同轴腔回旋脉塞,进行了数值计算分析。结果表明:电子束错位会使输出功率下降,但对工作模TE_82,16,1模的影响,比对竞争模TE_27,16,1模的影响更小。     

Study of Electron Beam Misalignment in a Submillimeter Wave Gyrotron

Electron beam misalignment in a submillimeter-wave gyrotron strongly affects its total efficiency as well as excitation of rotating and counterrotating modes. Some of misalignment phenomena were studied theoretically and experimentally.     

Performance of a 80 W copper vapor laser with “alignment free” unstable CAT-EYE resonator and other configurations using intra-cavity apertures

Performance of a kinetically enhanced copper vapor laser (KE-CVL) with various stable/unstable “alignment free” CAT-EYE resonator configurations are presented here in this paper. The laser used in the experiment was a 45 mm bore (∼2 l discharge volume) kinetically enhanced copper vapor laser developed in our laboratory and capable of generating maximum power of ∼80 W (at ∼9.8 kHz). The efficiency of the laser was ∼1.4% and beam divergence of ∼3.5 mrad in a plane-plane standard multimode cavity. For the first time performance of unstable CAT-EYE resonator is demonstrated with a CVL/KE-CVL. On using unstable CAT-EYE resonator the divergence of the laser beam reduced to ∼0.22 mrad (∼20-fold reduction as compared to conventional plane-plane cavity), ∼40 W output power and with excellent misalignment tolerance. The laser output power was found to be within ∼5% drift/decline with misalignment angle of about 4 mrad between the mirrors. This is a significant improvement in comparison to standard conventional unstable resonator (M ∼ 50) CVL where ∼0.5 mrad divergence is achieved with power drift/decline of about 45% at ∼4 mrad misalignment angle.Off-axis unstable CAT-EYE unstable resonator was also demonstrated for the first time with further reduction in beam divergence to ∼0.13 mrad and with output power of ∼28 W. The misalignment tolerance was found to be highest in case of off-axis unstable CAT-EYE resonator with decline/drift in laser power of only ∼10% for misalignment angle as high as ∼8 mrad. Performance with intra-cavity apertures in plane-plane type CAT-EYE resonator for transverse mode control is also presented for the first time in CVLs. It is observed that the laser beam divergence reduces significantly to 1.25 mrad (a factor of 2) on using an aperture of ∼3.5 mm at the CAT-EYE reflector as compared to its normal (R = F = d) configuration without aperture. In case of stable CAT-EYE resonator the average beam divergence reduces from 8 mrad to 4 mrad (factor of 2) on using intra-cavity aperture of about 3 mm. It was also observed that high misalignment tolerance was retained on using intra-cavity apertures in almost all the CAT-EYE resonators. Use of intra-cavity mesh was also demonstrated for the first time with stable CAT-EYE resonator for improving the beam focus-ability. Average beam divergence was reduced by a factor of 2.5 (from 8 mrad to 3 mrad) on using intra-cavity mesh. These new configurations in CAT-EYE resonators in KE-CVLs are found to be effective in improving and controlling the laser beam divergence significantly with additional characteristic of high misalignment tolerance.     

Vibration response of misaligned rotors

Misalignment is one of the common faults observed in rotors. Effect of misalignment on vibration response of coupled rotors is investigated in the present study. The coupled rotor system is modelled using Timoshenko beam elements with all six dof. An experimental approach is proposed for the first time for determination of magnitude and harmonic nature of the misalignment excitation. Misalignment effect at coupling location of rotor FE model is simulated using nodal force vector. The force vector is found using misalignment coupling stiffness matrix, derived from experimental data and applied misalignment between the two rotors. Steady-state vibration response is studied for sub-critical speeds. Effect of the types of misalignment (parallel and angular) on the vibration behaviour of the coupled rotor is examined. Along with lateral vibrations, axial and torsional vibrations are also investigated and nature of the vibration response is also examined. It has been found that the misalignment couples vibrations in bending, longitudinal and torsional modes. Some diagnostic features in the fast Fourier transform (FFT) of torsional and longitudinal response related to parallel and angular misalignment have been revealed. Full spectra and orbit plots are effectively used to reveal the unique nature of misalignment fault leading to reliable misalignment diagnostic information, not clearly brought out by earlier studies.     

Integrated receiver architectures for board-to-board free-space optical interconnects

In many computer and server communications copper cables and wires are currently being used for data transmission and interconnects. However, due to significant shortcomings, such as long transmission time, high noise level, unstable electrical properties, and high power consumption for cooling, researchers are increasingly turning their research interests toward alternatives, such as fiber optic interconnects and free-space optical communication technologies. In this paper, we present design considerations for an integrated receiver for high-speed free-space line-of-sight optical interconnects for distortion-free data transmission in an environment with mechanical vibrations and air turbulences. The receiver consists of an array of high-speed photodiodes for data communication and an array of quadrant photodiodes for real-time beam tracking in order to compensate for the beam misalignment caused by vibrations in servers. Different configurations for spatially positioning the quadrant and data photodiodes are discussed for 4×4 and 9×9 multielement optical detector arrays. We also introduce a new beam tracking device, termed the strip quadrant photodiodes, in order to accurately track highly focused optical beams with very small beam diameter.     

High-peak-power diode-pumped passively Q-switched Nd:YVO<Subscript>4</Subscript> laser

We report on a passively Q-switched diode-pumped Nd:YVO₄ laser polarized along the a axis (corresponding to the smallest value of emission cross section at 1064 nm), generating 157-μJ pulses with 6.0-ns time duration (>20 kW peak power) and 3.6 W of average power at 1064 nm with good beam quality (M²<1.4). The selection of the polarization was performed by a novel technique relying on the birefringence of the laser crystal and on the misalignment sensitivity of the resonator. Received: 30 September 2002 / Revised version: 22 November 2002 / Published online: 19 March 2003 RID="*" ID="*"Corresponding author. Fax: +39-382/422583, E-mail: agnesi@ele.unipv.it     

Degradation of beam quality and depolarization of the laser beam in a step-index multimode optical fiber

The characteristics of a laser beam are altered during propagating through large-core multimode optical fibers. The distribution of modes excited by the input laser beam is modified by means of mode coupling on transmission through the fiber, leading to the degradation of beam quality and the depolarization of the delivered beam. The relationship between the beam quality factor (M²) of output beam from a large-core multimode fiber and the fiber length, as well as the relationship between the degree of polarization (V) of output beam from such a fiber and the fiber length, are introduced in this paper. When a laser beam was well launched into a large-core step-index multimode fiber, M² of the output beam was a compound tanh function of the fiber length. A linear polarization beam that well launched into such fiber suffered depolarization. The V of the output beam was an exponent function of fiber length. And the misalignment between beam axis and fiber axis made the beam quality degrade faster but made no difference of the utmost M² in the aligned and misaligned conditions. Also, the misalignment condition made the polarization of output beam degrade faster.     

Writing a superlattice with light forces

In atom lithography the conventional roles played by light and matter are reversed. Instead of using a solid mask to pattern a light beam, a mask of light is used to pattern a beam of neutral atoms. In this paper we report the production of different chromium dot arrays with quadratic symmetry. The lattice period depends on the relative polarization and the phase of the two standing waves generating the light mask. A small angular misalignment of the laser beams breaks the high symmetry and a chromium superlattice is written, that is a continuous periodic change between two different quadratic lattices. The structures exhibit lines with a FWHM below 50 nm and clearly separated chromium dots with a FWHM below 70 nm. Received: 30 September 1999 / Revised version: 14 February 2000 / Published online: 5 April 2000     

双池算法软件在对准偏差计算中的应用

提出了一种高精度的对准偏差算法－双池算法。根据这种算法，将暗场对准系统中扫描采集的光电对准信号，通过求出整个扫描曲线的对称点以代替传统的极值点或阈值点，使重复对准精度达０．１１μｍ（３σ）。文中对双池算法的原理、特点及数学表达式进行了详细的论述，并给出了实验结果。