Effects of a 10 T external magnetic field on the thermal decomposition of Fe, Ni, and Co acetyl acetonates

The current investigation is centered on the thermal decomposition (700 degrees C) of acetyl acetonates of Ni, Co, and Fe in a closed reactor that was conducted by employing an external magnetic field (MF) of 10T. Interestingly, reactions of Co and Ni acetyl acetonates under a 10T MF produce Co and Ni nanoparticles (NPs) coated with carbon, while Fe acetyl acetonate produces Fe3O4 uncoated with carbon. Additionally, it is observed that all the as-formed magnetic particles tend to align in one dimension along applied MF; thus, this process can be used to fabricate large arrays of magnetic nanoparticles. The effect of an applied MF to synthesize morphologically and compositionally different products from corresponding precursors with their mesoscopic organization is the key theme of the present paper, explained with a plausible mechanism.     

Mixed valency in the high-temperature phases of transition metal molybdates, A MoO4 ( A =Fe, Co, Ni)

Transition metal molybdates of the formulaAMoO₄ whereA=Fe, Co or Ni exhibit a first-order phase transition between 670K–970K. An investigation of the lowtemperature (lt) and high-temperature (ht) phases by x-ray photoelectron spectroscopy, x-ray absorption spectroscopy, magnetic susceptibility and other physical methods shows that the phase transition is associated with a valence change of the typeA ²⁺+Mo⁶⁺αA ³⁺+Mo⁵⁺ in the cases of iron and cobalt molybdates. Contribution No. 311 from the Solid State and Structural Chemistry Unit.     

Low Temperature Specific Heat Capacity of 3d Transition Metal Chlorine Boracites (T3B7O13Cl; T=Cr,Mn, Fe,Co, Ni,Cu, Zn or Mg)

The heat capacities of eight chlorine boracites T₃B₇O₁₃Cl (T=Cr, Mn, Fe, Co, Ni, Cu, Zn or Mg) have been measured in the temperature range 2 to 100 K. Magnetic phase transitions occur below 20 K in the compounds studied except in the two non-magnetic substances Zn₃B₇O₁₃Cl and Mg₃B₇O₁₃Cl. The magnetic specific heat capacities give information on magnetic ground state of the transition metals and the entropy related to the phase transitions. This revised version was published online in July 2006 with corrections to the Cover Date.     

Photoabsorption of Fe,Co, and Ni atoms embedded in Al-clusters near 3p-ionization threshold of impurity

Photoionization cross sections of Fe, Co, and Ni atoms inside Al jellium-clusters (containing up to 90 atoms) in the energy range near the 3p ionization threshold of the impurity atom are calculated using the time-dependent local spin-density approximation. The spectra are dominated by resonances and depend markedly on the cluster size. It is obtained that the resonances have an autoionization character and are caused by the interference between discrete electronic transitions from the 3p shell of the impurity atom to unfilled d shells of the jellium-cluster and ionization excitations ofd electrons. For comparison, within the same approach, photoionization cross sections of atomic Fe, Co, and Ni are computed.     

Determination of the 54Fe(n, 2n)53gFe and 54Fe(n, 2n)53mFe cross sections averaged over a 235U fission neutron spectrum

The reaction cross sections averaged over a ²³⁵U fission neutron spectrum have been measured for the ⁵⁴Fe(n, 2n)^53gFe and ⁵⁴Fe(n, 2n)^53mFe threshold reactions. The values found are, respectively: (1.14±0.13) mb, and (0.52±0.16) mb. The measured cross sections are referred to the (111±3) mb standard cross section of the ⁵⁸Ni(n, p)^58m+gCo reaction. The (81.7±2.2) mb standard cross section value for the ⁵⁴Fe(n, p)⁵⁴Mn reaction, was also used as a monitor to check the results obtained with the Ni standard, leading to an excellent agreement.     

A study of the new cubic,ordered perovskites BaLaMRuO6 (M = Mg,Fe, Co,Ni, or Zn) and the related phases La2MRuO6 (M = Mg,Co, Ni,or Zn) by 99Ru Mössbauer spectroscopy and other techniques

⁵⁷Fe and ⁹⁹Ru Mössbauer spectroscopy, coupled with magnetic susceptibility measurements down to 4.2 K, have been used to study the electronic and magnetic properties of the new cubic-ordered perovskites BaLaMRuO₆ (M = Mg, Fe, Co, Ni, or Zn). The ruthenium is present in the +5 oxidation state in all the compounds except BaLaFeRuO₆ which contains iron(III) and ruthenium(IV). All the compounds exhibit long-range antiferromagnetic order, with Néel temperatures in the range 20–40 K. Mössbauer spectra for the new compound La₂CoRuO₆ and the isostructural cubic perovskites La₂MRuO₆ (M = Mg, Ni, or Zn) confirm the presence of ruthenium(IV) in these phases and indicate that they are not ordered magnetically at 4.2 K.     

Sol–Gel Synthesis and Magnetic Studies of Titanium Dioxide Doped with 10% M (M=Fe,Mn and Ni)

TiO₂ nanocrystals doped with 1%, 5% and 10% Co/TiO₂ and 10% M (M=Fe, Mn and Ni) were prepared by the sol–gel technique and characterized using X-ray diffraction and SQUID. The as-prepared samples are found to be paramagnetic at room temperature, with the magnetic susceptibility following the Curie–Weiss law in the investigated range of 2–370 K. However, transformation from paramagnetism to room-temperature ferromagnetism (RTFM) for the 5% Co/TiO₂ was observed by hydrogenating the sample at 573 K while the 1% sample remained paramagnetic. As the percentage of Co was increased from 5% to 10% the Curie temperature increased from 390 K to 470 K determined via extrapolation. Transformation from paramagnetism to room-temperature ferromagnetism (RTFM) was also observed by hydrogenation of 10% Fe/TiO₂ at 573 K for 6 h. X-ray diffraction of the hydrogenated sample shows only single phase TiO₂ structure suggesting that the observed RTFM may be intrinsic but magnetic studies may suggest the possibility of Fe nanoparticles.     

Synthesis,characterization, electrical conductivity,and catalytic studies of some coordination polymers of salen-type schiff base

Coordination polymers of Mn(II), Fe(II), Co(II), Ni(II), Cu(II), Zn(II), and Cd(II) with the salen-type Schiff base 4,4′-bis[(N-ethanesalicylaldehydediamine-5)azo]biphenyl have been prepared and characterized by elemental analyses, IR and electronic spectra, magnetic susceptibility measurements, and thermogravimetric analysis. Thermogravimetric analysis confirms the coordination of H₂O in complexes. The ¹H NMR spectrum of ligand clearly indicates the presence of OH and azomethine groups. The octahedral geometry have been suggested for Mn(II), Fe(II), Co(II), and Ni(II) complexes, and square planar Cu((II), whereas tetrahedral is suggested for Zn(II) and Cd(II) polychelates. Thermal data have been analyzed for kinetic parameters by both Coat-Redfern and Broido methods. Solid-state dc conductivity of ligand and its polychelates was measured in their compressed pellet form over 313–413 K temperature range. Solidstate conductivity lies in the range 4.361 × 10⁻¹¹ to 7.241 × 10⁻¹⁰ Ohm⁻¹ cm⁻¹ indicating their semiconducting behavior. Oxidation of styrene with selected catalysts was tested using H₂O₂ as an oxidant.     

Comparisons of an external magnetic field effect and chemical effect on X-ray <Emphasis Type="Italic">Kβ</Emphasis>/<Emphasis Type="Italic">Kα</Emphasis> intensity ratio and line-shape of some Chromium compounds

The effect of chemical composition and external magnetic field on the Kβ/Kα intensity ratio and line-shape of some chromium compounds have been investigated using the energy dispersive X-ray fluorescence analysis. The measurements were done using the 22.69 keV photon energy and energy dispersive Si(Li) semiconductor detector. The samples are located in the external magnetic field of intensities 0.6 T and 1.2 T. The experimental results obtained for B = 0 are compared with other experimental and theoretical values. The results have shown that the X-ray Kβ/Kα intensity ratios, chemical shifts, asymmetry indices and full widths at half maximum (FWHM) values can change when irradiation is conducted in a magnetic field.     

Trace Analysis by Heavy Ion Induced X-Ray Emission

 Various K-, L- and M-shell X-ray production cross sections are measured for heavy ion impact on elements in the range Z ₂ = 13 to 83. The ion species range from Z ₁ = 10 to 36, and ion energies from 1 to 16 MeV are used. Enhanced cross sections are observed when the projectile K- or L- binding energy is similar to the energy of the target K-, L- or M-shell. This effect is used to improve the analysis sensitivity for selected elements. As an example trace analysis of Fe in glass with V, Mn, Co and Ni ions is investigated. Results are compared with proton induced X-ray emission analysis on the same samples. In these samples Fe-K_α X-ray production is similar for irradiation with 3 MeV protons and 14 MeV Ni ions. However the signal to background ratio is four times higher for the irradiation with Ni ions as compared to irradiation with protons. Advantages and drawbacks of heavy ion induced X-ray emission for quantitative analysis compared to proton induced X-ray emission analysis are discussed.     

Synthesis,structural, and biological studies of some bivalent metal ion complexes with the tridentate Schiff base ligand

New complexes of a Schiff base derived from 2-hydroxy-5-chloroacetophenone and glycine with Mn(II), Fe(II), Co(II), Ni(II), Cu(II), Zn(II), Cd(II), and UO₂(VI) have been synthesized. The ligand and the complexes have been characterized on the basis of analytical data, electrical conductance, IR, ESR, and electronic spectra, magnetic susceptibility measurements and thermogravimetric analysis. The ligand acts as a dibasic tridentate (ONO) donor molecule in all the complexes except the Zn(II) complex, where it acts as a monobasic bidentate (OO) donor. Antibacterial activities of the ligand and its metal complexes have been determined by screening the compounds against various Gram(+) and Gram(−) bacterial strains. The solid state d.c. electrical conductivity of the ligand and its complexes has been measured over 313–398 K and the complexes were found to be of semiconducting nature. The article is published in the original.     

Cesium carbonate supported on hydroxyapatite coated Ni0.5Zn0.5Fe2O4 magnetic nanoparticles as an effi cient and green catalyst for the synthesis of pyrano[2,3-c]pyrazoles

Cesium carbonate supported on hydroxyapatite coated Ni0.5Zn0.5Fe2O4 magnetic nanoparticles (Ni0.5Zn0.5Fe2O4@Hap-Cs2CO3) was found to be magnetically separable, highly efficient, green and recyclable heterogeneous catalyst. The synthesized nanocatalyst has been characterized with several methods (FT-IR, SEM, TEM, XRD and XRF) and these analyzes confirmed which the cesium carbonate is well supported to catalyst surface. After full characterization, its catalytic activity was investigated in the synthesis of pyranopyrazole derivatives and the reactions were carried out at room temperature in 50:50 water/ethanol with excellent yields (88-95%). More importantly, the Ni0.5Zn0.5Fe2O4@Hap-Cs2CO3 was easily separated from the reaction mixture by external magnetic field and efficiently reused at least six runs without any loss of its catalytic activity. Thus, the developed nanomagnetic base catalyst is potentially useful for the green and economic production of organic compounds.     

Low-temperature solution synthesis of the non-equilibrium ordered intermetallic compounds Au3Fe, Au3Co, and Au3Ni as nanocrystals

Alloys and intermetallic compounds of Au with the 3d transition metals Fe, Co, and Ni are nonequilibrium phases that have many useful potential applications as catalytic, magnetic, optic, and multifunctional magneto-optic materials. However, the atomically ordered Au-M (M = Fe, Co, Ni) intermetallics are particularly elusive from a synthetic standpoint. Here we report the low-temperature solution synthesis of the L12 (Cu3Au-type) intermetallic compounds Au3Fe, Au3Co, and Au3Ni using n-butyllithium as a reducing agent. Reaction pathway studies for the Au3Co system indicate that Au nucleates first, followed by Co incorporation to form the intermetallic. The nonequilibrium intermetallic nanocrystals have been characterized by powder XRD, TEM, EDS, selected area electron diffraction, and nanobeam electron diffraction, which collectively confirm the compositions and superlattice structures.     

Syntheses, structures, and magnetic properties of the face-centered cubic clusters [Tp(8)(H(2)O)(12)M(6)Fe(8)(CN)(24)](4+) (M = Co, Ni)

Reactions between K[TpFe(CN)3] (Tp- = hydrotris(1-pyrazolyl)borate) and M(ClO4)2 x 6H2O (M = Co or Ni) in a mixture of acetonitrile and methanol afford, upon crystallization via THF vapor diffusion, [Tp8(H2O)12Co6Fe8(CN)24](ClO4)4.12THF x 7H2O (1) and [Tp8(H2O)12Ni6Fe8(CN)24](ClO4)4.12THF x 7H2O (2). Both compounds contain cyano-bridged clusters with a face-centered cubic geometry, wherein octahedral CoII or NiII centers are situated at the face-centering sites. The results of variable-temperature magnetic susceptibility measurements indicate the presence of ferromagnetic exchange coupling within both molecules to give ground states of S = 7 and 10, respectively. Low-temperature magnetization data reveal significant zero-field splitting, with the best fits for the Co6Fe8 and Ni6Fe8 clusters yielding D = -0.54 and 0.21 cm-1, respectively; ac magnetic susceptibility measurements performed on both samples showed no evidence of the slow relaxation effects associated with single-molecule magnet behavior.     

Phase Transitions in Crystalline [M(H2O)6](ClO4)2 (M=Mg,Mn, Fe,Co, Ni,Cu, Zn,Cd and Hg)

The results of DSC measurements in the temperature range 140–370 K on nine crystalline compounds of the type [M(H₂O)₆](ClO₄)₂, where M=Mg, Mn, Fe, Co, Ni, Cu, Zn, Cd and Hg, are discussed. Anomalies detected in the DSC curves are related to the existence of solid-solid phase transitions and/or to the melting points of these compounds. In consequence of two different hypothetical structural modifications of [Fe(H₂O)₆](ClO₄)₂, two DSC curves are obtained. For the compounds with M=Fe, Cd and Hg, new phase transitions have been discovered. The transition temperatures of the other phase transitions are in good agreement with literature data obtained by adiabatic calorimetry. For the compounds with M=Mg, Ni and Cd, DTA measurements were also carried out and the melting points of theses compounds were established. This revised version was published online in August 2006 with corrections to the Cover Date.     

Metal‐Organic Niccolite: Synthesis,Structures, Phase Transition,and Magnetic Properties of [CH3NH2(CH2)2NH2CH3][M2(HCOO)6] (M=divalent Mn,Fe, Co,Ni, Cu and Zn)

We report the synthesis, crystal structures, thermal and magnetic characterizations of a family of metal‐organic frameworks adopting the niccolite (NiAs) structure, [dmenH₂²⁺][M₂(HCOO)₆²⁻] (dmen=N,N′‐dimethylethylenediamine; M=divalent Mn, 1Mn ; Fe, 2Fe ; Co, 3Co ; Ni, 4Ni ; Cu, 5Cu ; and Zn, 6Zn ). The compounds could be synthesized by either a diffusion method or directly mixing reactants in methanol or methanol–water mixed solvents. The five members, 1Mn , 2Fe , 3Co , 4Ni , and 6Zn are isostructural and crystallize in the trigonal space group P 1c, while 5Cu crystallizes in C2/c. In the structures, the octahedrally coordinated metal ions are connected by anti–anti formate bridges, thus forming the anionic NiAs‐type frameworks of [M₂(HCOO)₆²⁻], with dmenH₂²⁺ located in the cavities of the frameworks. Owing to the Jahn–Teller effect of the Cu²⁺ ion, the 3D framework of 5Cu consists of zigzag Cu‐formate chains with Cu OCHO Cu connections through short basal Cu O bonds, further linked by the long axial Cu O bonds. 6Zn exhibits a phase transition probably as a result of the order–disorder transition of the dmenH₂²⁺ cation around 300 K, confirmed by differential scanning calorimetry and single crystal X‐ray diffraction patterns under different temperatures. Magnetic investigation reveals that the four magnetic members, 1Mn , 2Fe , 3Co , and 4Ni , display spin‐canted antiferromagnetism, with a Néel temperature of 8.6 K, 19.8 K, 16.4 K, and 33.7 K, respectively. The Mn, Fe, and Ni members show spin‐flop transitions below 50 kOe. 2Fe possesses a large hysteresis loop with a large coercive field of 10.8 kOe. The Cu member, 5Cu , shows overall antiferromagnetism (both inter‐ and intra‐chains) with low‐dimensional characteristics.     

Thermal and electrical studies of some polychelates

Polychelates of Mn(II), Fe(II), Co(II), Ni(II), and Cu(II) with 4,4′-dihydroxy-3,3′-diacetylbiphenyl-dithioxamide (DDBDO) have been prepared. Their structures were determined by visible reflectance spectroscopy and magnetic measurements in conjunction with thermogravimetric and IR measurements. Elemental analysis indicates a 1∶1 metal-ligand stoichiometry and the association of water molecules with the central metal. The decomposition temperature of the chelates is in the order Ni(II)>Fe(II)>Co(II)>Mn(II)>Cu(II). Thermal activation energies (E _a ), calculated with the help of Freeman-Carroll and Sharp-Wentworth methods, are in agreement with each other. The polychelates were found to be semiconductive, and the activation energy obtained from semiconducting behavior follows the order Co(II)>Ni(II)>Fe(II)>Cu(II)>Mn(II). The probable structure, such as six coordinated octahedral for Mn(II) and Fe(II) polychelates and four coordinated square planar for Co(II), Ni(II), and Cu(II) polychelates, have been suggested.     

Electrothermal vaporization dynamic reaction cell inductively coupled plasma mass spectrometry for the determination of Fe,Co, Ni,Cu, and Zn in biological samples

Slurry sampling electrothermal vaporization dynamic reaction cell inductively coupled plasma mass spectrometry (ETV-DRC-ICP-MS) has been applied to determine Fe, Co, Ni, Cu, and Zn in biological samples. The influences of instrument operating conditions and slurry preparation on the ion signals were reported. Pd was used as the modifier. The effectiveness of the ETV sample introduction technique and dynamic reaction cell in alleviating various spectral interferences in ICP-MS analysis has been demonstrated. This method has been applied to determine Fe, Co, Ni, Cu, and Zn in NIST SRM 1573a tomato leaves reference material and NRCC DORM-2 dogfish muscle reference material and also real samples such as a tea and a swordfish sample purchased locally. Since the sensitivities of the elements studied in slurry and aqueous solution were different, an analyte addition technique was used for the determinations. The analytical results of the reference materials agreed with the certified values. The precision between sample replicates was better than 6% for all determinations. The method detection limit estimated from analyte addition curves was 0.01, 0.006, 0.007, 0.004, and 0.006 μg g⁻¹ for Fe, Co, Ni, Cu, and Zn, respectively, in the original biological samples.     

Transition metal complexes of a Schiff base: synthesis,characterization, and antibacterial studies

Synthesis of a new Schiff base derived from 2-hydroxy-5-methylacetophenone and glycine and its coordination with compounds Mn(II), Fe(II), Co(II), Ni(II), Cu(II), Zn(II), Cd(II), and UO₂(VI) are described. The ligand and complexes have been characterized on the basis of analytical, electrical conductance, infrared, ESR and electronic spectra, magnetic susceptibility measurements, and thermogravimetric analysis. The ligand is a dibasic tridentate (ONO) donor in all the complexes except Zn(II), where it is a monobasic bidentate (OO) donor. The solid state DC electrical conductivity of ligand and its complexes have been measured over 313–398 K, and the complexes were semiconducting. Antibacterial activities of ligand and its metal complexes have been determined by screening the compounds against various Gram (+) and Gram (?) bacterial strains.     

Some Mo¨ssbauer and X-ray investigations of theα2-Snformation during the reduction of SnCl2 water solutions

Tin structures with very high values of the isomer shifts (δ = +4.3 ± 0.1 mm/sec and δ = +7 ± 0.4 mm/sec) of the Mo¨ssbauer lines, have been observed not only in thin tin films but also in bulk samples. The samples have been obtained by the reduction of SnCl₂ water solutions with Mg, carried out either in the presence of ferromagnetic impurities (Fe, Co, Ni) or in an external magnetic field. The parallel X-ray studies are in accordance with the RHEED observations of thin tin films. The temperature dependence of the Mo¨ssbauer effect on samples rich inα₂-Snhas been studied and microcalorimetric measurements on samples containingβ₁-Snandα₂-Snhave also been performed.