ProteinA亲合膜色谱柱的性能及从人血浆中纯化免疫球蛋白的研究

以木纤维为基质,与甲基丙烯酸环氧丙酯共聚接枝合成了复合膜介质,用复合膜介质制备了ｐｒｏｔｅｉｎＡ亲合膜色谱柱,考察了ｐｒｏｔｅｉｎＡ亲合膜色谱柱液相流动特性和吸附性能。实验证明：流速与亲合膜色谱柱柱压呈线性关系,当流速为３ｍＬ／ｍｉｎ时,柱压为１６０ｋＰａ。免疫球蛋白（ＩｇＧ）浓度和上样速度是影响ｐｒｏｔｅｉｎＡ键合容量的重要因素,对其进行了优化研究。用动态吸附法确定了对人ＩｇＧ动态最大吸附能力可达２１．７ｍｇ／ｇ（干介质）。     

Membrane affinity chromatography for analysis and purification of biopolymers

Summary Affinity columns suitable for HPLC were prepared by immobilization of various ligands of protein A, human IgG, human IgM and pectinase on GMA modified cellulose membrane. The adsorption capacity, affinity efficiency and activity recovery of various IgGs on these affinity columns were measured. It was observed that the length of the coupling arm plays a very important role in affinity efficiency, and the effect of eluent flow-rate on adsorption capacity was very small. The protein A column was exploited for the process monitoring of dog IgG in clinical experiments on immuno-adsorption therapy. A pectinase column was used for the determination of polygalacturonase inhibiting proteins first purified on a hydroxyapatite column. It took only about 2.5 min for analysis at a flow-rate of 1.0 mL min⁻¹. The high speed analysis of biopolymers could be performed at a flow rate of 6.0 mL min⁻¹ within 15 s. Membrane affinity chromatography gives good reproducibility, high efficiency, low column-pressure and is rapid. It can also be used for micro-scale purification of biopolymers.     

Separation of planar chiral ferrocene derivatives on beta-cyclodextrin-based polymer supports prepared via ring-opening metathesis graft-polymerization

A plastic microfluidic system, containing porous poly(vinylidene fluoride) (PVDF) membranes adsorbed with bovine serum albumin (BSA), is demonstrated for high resolution chiral separation of racemic tryptophan and thiopental mixtures. Microfluidic networks on poly(dimethylsiloxane) (PDMS) substrates are fabricated by capillary molding technique. This miniaturized chiral separation system consists of two layers of PVDF membranes which are sandwiched between two PDMS slabs containing microchannels facing the membranes. On-line adsorption of BSA onto the membranes is employed for the preparation of chiral stationary phase and the evaluation of solution conditions in an effort to achieve maximum protein adsorption. Variations in the mobile phase conditions, including solution pH and ammonium sulfate concentration, are studied for their effects on chiral separation. Based on the large surface area to volume ratio of porous membrane media, adsorbed BSA onto the PVDF membranes enables high resolution separation of racemic mixtures with sample consumption of sub-nanogram or less in the integrated microfluidic networks. In addition, the membrane pore diameter in the submicron range eliminates the constraints of diffusional mass-transfer resistance during protein adsorption and chiral chromatographic processes.     

The streaming potential method for the characterization of ultrafiltration organic membranes and the control of cleaning treatments

Streaming potential measurement of ultrafiltration (UF) membranes have been realised a new design. This new design is more convenient to determine the streaming potential on a function of the pressure for all kinds of modules (planar, hollow fiber.h.). The effects of pH, ionic strength and size of pores have been studied. Isoelectric points of different materials (polyethersulfone, celloulse acetate, cellulose triacetate and polysulfone membranes) have been experimentally determined from ν variations with pH at a given ionic are, respectively, 3.1, 4.2, 3.4 and 0.5. The study of the charge organic membranes studied has been shown that adsorbing ions are those of water itself. Then the surface charge of the membrane is a dependent on the pH and at the isoelectric point, the charge density and the streaming potential vanished. The polyethersulfone membrane surface has been modified with TX100 adsorption and the modification observed with our design compared to contact angle and permeabilities measurements. The orientation angle of the surfactant at the membrane surface is obtained: θ=5°, and shows that a flat adsorption occurs. The impact of membranes cleaning procedures have been studied in term of permeability completed by streaming potential measurements. It appeared clearly that streaming potential is a useful tool for the control of cleaning procedures.     

蛋白A连续床亲和毛细管色谱柱的制备及性能考察

人免疫球蛋白 G(HIg G)是一种重要的生物大分子 ,是人血浆中的主要成分之一 ,通常采用免疫学的方法测定 .蛋白 A(Protein A)与免疫球蛋白 (HIg G)的 Fc区之间具有很强的特异性亲和作用 ,因而固载蛋白 A的亲和介质可用于免疫球蛋白及单克隆抗体的分离、纯化和分析测定[1～ 3 ] .根据固定相存在形式的不同 ,毛细管色谱柱主要有开管、填充和连续床柱 3种方式 .连续床具有相比高、易制备 (一步合成 )、孔径易控制、不需烧塞子和易改性等优点 .连续床与其它常用的亲和介质 (如球型凝胶颗粒、灌流色谱基质 [4、 5] 、膜介质 [6,7] 等 )相比具…     

Various approaches to modify biomaterial surfaces for improving hemocompatibility

In this paper, the mechanism of thrombus formation on the surface of polymeric materials and the various approaches of modifying biomaterial surfaces to improve their hemocompatibility are reviewed. Moreover, the blood compatibility of the cellulose membrane grafted with O-butyrylchitosan (OBCS) by using a radiation grafting technique was studied. Surface analysis of grafted cellulose membrane was verified by attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) and electron spectroscopy for chemical analysis (ESCA), which confirmed that OBCS was successfully grafted onto the cellulose membrane surfaces. Blood compatibility of the grafted cellulose membranes was evaluated by platelet rich plasma (PRP) contacting experiments and protein adsorption experiments using blank cellulose membranes as the control. The blood compatibility of OBCS grafted cellulose membranes is better than that of blank cellulose membranes. These results suggest that the photocrosslinkable chitosan developed here has the potential of serving in blood-contacting applications in medical use.     

Immobilization of lipase onto cellulose ultrafine fiber membrane for oil hydrolysis in high performance bioreactor

Practical application of biphasic enzyme-immobilized membrane bioreactors (EMBR) requires efficient loading of the enzyme with retention of enzymatic activity. Here, we report a method to fabricate an ultrafine fiber membrane conjugated to lipase with high levels of enzyme loading and activity retention. A cellulose acetate (CA) non-woven ultrafine fiber membrane was prepared with 200 nm nominal fiber diameter by electrospinning, followed by alkaline hydrolysis to obtain regenerated cellulose (RC). The RC ultrafine fiber membrane was oxidized by exposure to NaIO₄, simultaneously generating aldehyde groups to couple with pentaethylenehexamine (PEHA) as a spacer for lipase immobilization. A biphasic EMBR was assembled with the PEHA-modified and lipase-immobilized membranes. The effect of operation variables, namely aqueous-phase system, reaction pH, accelerant (sodium taurocholate) content, reaction temperature, and membrane usage on the performance of this bioreactor was investigated with the hydrolysis of olive oil. A bioreactor activity as high as 9.83 × 10⁴ U/m² was obtained under optimum operational conditions.     

Removal of aromatic compounds in the aqueous solution via micellar enhanced ultrafiltration: Part 1. Behavior of nonionic surfactants

The effects of nonionic surfactants having different hydrophilicity and membranes having different hydrophobicity and molecular weight cut-off on the performance of micellar-enhanced ultrafiltration (MEUF) process were examined. A homologous series of polyethyleneglycol (PEG) alkylether having different numbers of methylene groups and ethylene oxide groups was used for nonionic surfactants. Polysulfone membranes and cellulose acetate membranes having different molecular cut-off were used for hydrophobic membranes and hydrophilic membranes, respectively. The concentration of surfactant added to pure water was fixed at the value of 100 times of critical micelle concentration (CMC). The flux through polysulfone membranes decreased remarkably due to adsorption mainly caused by hydrophobic interactions between surfactant and membrane material. The decline of solution flux for cellulose acetate membranes was not as serious as that for polysulfone membranes because of hydrophilic properties of cellulose acetate membranes. The surfactant rejections for the cellulose acetate membranes increased with decreasing membrane pore size and with increasing the hydrophobicity of surfactant. On the other hand the surfactant rejections for polysulfone membranes showed totally different rejection trends with those for cellulose acetate membranes. The surfactant rejections for the polysulfone membranes depend on the strength of hydrophobic interactions between surfactant and membrane material and molecular weight of surfactants.     

The effect of NaCl on the adsorption of human IgG onto CM-Asp–PEVA hollow fiber membrane-immobilized nickel and cobalt metal ions

Over the past decade, immobilized metal-affinity adsorbents have attracted increasing interest for purification of natural and recombinant immunoglobulin G (IgG). In this work, nickel and cobalt metal ions complexed with CM-Asp (carboxymethylaspartate) immobilized on poly(ethylenevinyl alcohol) (PEVA) hollow fiber membranes were evaluated for purification of human IgG from serum. The buffer system and NaCl had important effects on human serum protein adsorption in both adsorbents. Efficient purification of IgG was accomplished in sodium phosphate buffer without NaCl at pH 7.0. Under this condition, the electrostatic interactions are important for adsorption. The Ni(II)-CM-Asp–PEVA had a protein adsorption capacity of 17.5 mg of IgG mL^?1 fiber when human serum diluted was loaded in crossflow filtration mode and the eluted IgG had a purity of 82.6 % (based on total protein and IgG, IgM, HSA, and Trf nephelometric analysis). Fitting the experimental IgG adsorption data to the Langmuir and Langmuir–Freundlich models showed that Ni(II)-CM-Asp and Co(II)-CM-Asp had Langmuirean and non-Langmuirean behavior, respectively, with positive cooperativity for IgG-Co(II)-CM-Asp binding, probably due to multipoint interactions (n = 2.12 ± 0.31). Thus, these membranes can be considered as alternative adsorbents for the purification or depletion of IgG from human serum.     

Effect of aging on UF membranes by a streaming potential (SP) method

In this paper we have determined, by a streaming potential (SP) method, the isoelectric point (IEP) of a new cellulose membrane, the regenerated cellulose material. This membrane is more hydrophilic than the classical cellulose acetate material and less sensitive to protein adsorption, with an IEP of 3.4.Furthermore, we have validated an SP method as a new method to control aging of porous membranes. We validate the SP technique on a surface of 30 cm² for a membrane with a molecular weight cut-off of 10 kDa.In this new field of research where nondestructive techniques are not many, we have shown, for the first time, the efficiency of coupling permeability and SP measurements to control aging of mesoporous polymer membranes.     

Initial evaluation of protein A modified capillary‐channeled polymer fibers for the capture and recovery of immunoglobulin G

A novel protein A affinity chromatography stationary phase has been developed from polypropylene capillary‐channeled polymer fibers modified with a recombinant protein A ligand for the capture and recovery of immunoglobulin G (IgG) with high specificity and yield. An SPE micropipette tip format was employed so that solvent, protein, and antibody consumption was minimized. The adsorption modification of the fiber surfaces with protein A was evaluated as a function of feed concentration and volume. Optimal modification of the fiber surface with protein A yielded a 5.7 mg/mL (bed volume) ligand capacity with the modified fibers showing stability across numerous solvent environments. Performance was evaluated through exposure to human IgG and myoglobin, individually and as a mixture. Myoglobin was used as a surrogate for host cell proteins common to growth media. The efficacy of the selective binding to the ligand is demonstrated by the 2.9:1 (IgG/protein A) binding stoichiometry. Elution with 0.1 M acetic acid yielded an 89% recovery of the captured IgG based on absorption measurements of the collected eluents. Regeneration was possible with 10 mM NaOH. Protein A modified polypropylene capillary‐channeled polymer fibers show promising initial results as an affinity phase for efficient capture and purification of IgG.     

Fouling and protein adsorption effect of low-temperature plasma treatment of membrane surfaces

Adsorption of proteins and the effect of the chemical nature of membrane surfaces on protein adsorption were investigated using¹⁴C-tagged albumin and several microporous membranes (polyvinilydene fluoride, PVDF; nylon; polypropylene, PP; and polycarbonate, PC). The membrane surfaces were modified by exposing them to low-temperature plasma of several different monomers (n-butane, oxygen, nitrogen alone or as mixtures) in a radiofrequency plasma reactor. Transients in the permeability of albumin solutions through the membranes and changes in flux of distilled water through the membranes before and after adsorption of albumin were used to investigate the role of protein adsorption on membrane fouling. The results show that the extent of adsorption of albumin on hydrophobic membranes was considerably more than that on hydrophilic membranes. The hydrophilic membranes were susceptible to electrostatic interactions and less prone to fouling. A pore-blocking model was successfully used to correlate the loss of water flux through pores of defined geometry     

Use of cellulose derivatives on gold surfaces for reduced nonspecific adsorption of immunoglobulin G

This study addresses the design of protein-repellent gold surfaces using hydroxyethyl- and ethyl(hydroxyethyl) cellulose (HEC and EHEC) and hydrophobically modified analogues of these polymers (HM-HEC and HM-EHEC). Adsorption behavior of the protein immunoglobulin G (IgG) onto pure gold and gold surfaces coated with cellulose polymers was investigated and described by quartz crystal microbalance with dissipation monitoring (QCM-D), atomic force microscopy (AFM) and contact angle measurements (CAM). Surfaces coated with the hydrophobically modified cellulose derivatives were found to significantly outperform a reference poly(ethylene glycol) (PEG) coating, which in turn prevented 90% of non-specific protein adsorption as compared to adsorption onto pure gold. HEC and EHEC prevented around 30% and 60% of the IgG adsorption observed on pure gold, while HM-HEC and HM-EHEC were both found to completely hinder biofouling when deposited on the gold substrates. Adsorption behavior of IgG has been discussed in terms of polymer surface coverage and roughness of the applied surfaces, together with hydrophobic interactions between protein and gold, and also polymer-protein interactions.     

Lipase bound cellulose nanofibrous membrane via Cibacron Blue F3GA affinity ligand

Cellulose (Cell) nanofibrous membranes were prepared by nucleophilic reaction of the cellulose hydroxyl with the triazinyl chloride of Cibacron Blue F3GA (CB) ligand and studied as affinity membranes for lipase enzyme. Cell nanofibrous membranes containing fibers with 200 nm average diameters were prepared by electrospinning of cellulose acetate (CA), followed by alkaline hydrolysis. The CB capacity of the Cell nanofibrous membranes was optimized by lengthening the nucleophilic reaction time and increasing CB concentration and ionic strength. The equilibrium adsorption isotherms of CB on the Cell nanofibrous membranes followed a typical Langmuir monolayer adsorption behavior. At 242 mg CB/g of Cell, the maximum lipase adsorption capacity (q_m) and the dissociation constant (K_d) values were 41.02 mg/g and 0.25 mg/mL, respectively. Optimal lipase adsorption capacity was obtained at pH 4.0, its isoelectric point, with added NaCl on Cell membranes 86 mg CB capacity per g of Cell. A facile lipase loading capacity of 16.21 mg/g of CB–Cell was achieved under moderated conditions and could be optimized to reach at least 150 mg/g. The CB–Cell bound lipase had similar catalytic rate and retained 86.2% activity as in its free form. These findings clearly show that the CB bound Cell nanofibrous membrane is a highly efficient ultra-high specific porous support for lipase enzyme and is potentially versatile for immobilizing other enzymes and as affinity membrane for proteins.     

Structure and microporous formation of cellulose/silk fibroin blend membranes: Part II. Effect of post-treatment by alkali

Blend membranes (RCF1) were prepared from mixture solution of cellulose and silk fibroin (SF) in cuoxam by coagulating with acetone–acetic acid (4:1 by volume). The blend membranes were subjected to post-treatment with 10% NaOH aqueous solution, and their structure and properties were characterized by FT-IR, X-ray diffraction, DSC, SEM and DMTA. In previous work, cellulose/SF blend membranes (RCF2) prepared by coagulating with 10% NaOH aqueous solution formed a microporous structure, in which the SF as a pore former was almost completely removed from the membrane. However, when the blend membranes RCF1 were immersed in 10% NaOH aqueous solution for post-treatment, a strong hydrogen bonding between cellulose and SF inhibited the removal of SF. Although alkali is a good solvent for SF, the blend membranes RCF1 such obtained from cellulose and SF were alkali resistant. The crystallinity and the mean pore size of the blend membranes slightly decreased with increasing post-treatment time. This work provided a cellulose/silk blend membrane, which can be used under alkaline medium.     

Microfiltration performance of regenerated cellulose membrane prepared at low temperature for wastewater treatment

A series of regenerated cellulose membranes with pore diameters ranging from 21 to 52 nm have been prepared by dissolving cellulose in 5 wt% LiOH/12 wt% urea aqueous solution re-cooled to −12 °C. The influences of cellulose concentration on the structure, pore size, and the mechanical properties of the membrane were studied by using Wide angle X-ray diffraction, scanning electron micrography and tensile testing. Their pore size, water permeability, equilibrium-swelling ratio and fouling behaviors of the cellulose membranes were characterized. The water-soluble synthetic and natural polymers as organic matter were used to evaluate the microfiltration performance of the regenerated cellulose membrane for wastewater treatment in aqueous system. The results revealed that the organic matter with molecular weight more than 20 kDa effected significantly on the membrane pore density, and reducing factor a _2, whereas that having molecular weight less than 20 kDa exhibited a little influence on the membrane pore size reducing factor a ₁. Furthermore, a simple model to illustrate of microfiltration process of the RC membrane for wastewater treatment was proposed.     

两种固定化金属螯合复合亲和膜色谱介质制备

以纤维素滤纸为基质,通过碱处理、环氧活化、偶联亚氨基二乙酸二钠、固定化Ｃｕ＾２＋后制得了大孔纤维素亲和膜。另外,在活化后的膜上通过共价交联覆盖上琼脂糖,制得了具有类似“三明治”结构且性能优于的复合亲和膜,装柱后分别制得固定化金属螯合亲和膜色谱柱。对两种亲和膜进行牛血清白蛋白等温吸附测定显示,两者的最大吸附量分别为１．１７ｍｇ／ｃｍ＾２和１．３０ｍｇ／ｃｍ＾２,与传统的琼脂糖凝胶类介质吸附量相当,表     

Evaluation of the permeability of modified cellulose acetate propionate membranes for use in biosensors based on hydrogen peroxide detection

Phase inversion cellulose acetate propionate membranes showed lowpermeability to hydrogen peroxide aqueous solutions. Their permeability wasincreased by alkaline hydrolysis of the ester linking units. However, thepermeability remained lower than that of an unsubstituted cellulose membrane.The inclusion of hydroxypropyl cellulose in the membrane formulation, followedby an alkaline hydrolysis step, increased permeability to hydrogen peroxideaqueous solutions to 29% of that of an unsubstituted cellulose membrane.     

Oriented immobilized anti‐hIgG via Fc fragment‐imprinted PHEMA cryogel for IgG purification

Antibodies are used in many applications, especially as diagnostic and therapeutic agents. Among the various techniques used for the purification of antibodies, immunoaffinity chromatography is by far the most common. For this purpose, oriented immobilization of antibodies is an important step for the efficiency of purification step. In this study, F_c fragment‐imprinted poly(hydroxyethyl methacrylate) cryogel (MIP) was prepared for the oriented immobilization of anti‐hIgG for IgG purification from human plasma. Non‐imprinted poly(hydroxyethyl methacrylate) cryogel (NIP) was also prepared for random immobilization of anti‐hIgG to compare the adsorption capacities of oriented (MIP/anti‐hIgG) and random (NIP/anti‐hIgG) cryogel columns. The amount of immobilized anti‐hIgG was 19.8 mg/g for the NIP column and 23.7 mg/g for the MIP column. Although the amount of immobilized anti‐hIgG was almost the same for the NIP and MIP columns, IgG adsorption capacity was found to be three times higher than the NIP/anti‐hIgG column (29.7 mg/g) for the MIP/anti‐hIgG column (86.9 mg/g). Higher IgG adsorption capacity was observed from human plasma (up to 106.4 mg/g) with the MIP/anti‐hIgG cryogel column. Adsorbed IgG was eluted using 1.0 m NaCl with a purity of 96.7%. The results obtained here are very encouraging and showed the usability of MIP/anti‐hIgG cryogel prepared via imprinting of Fc fragments as an alternative to conventional immunoaffinity techniques for IgG purification. Copyright © 2012 John Wiley & Sons, Ltd.     

Immobilized metal affinity composite membrane based on cellulose for separation of biopolymers

Ｕｐｔｏｄａｔｅ,ｒａｐｉｄｐｕｒｉｆｉｃａｔｉｏｎｏｆｍｉｘｅｄｐｒｏｔｅｉｎｉｎｌａｒｇｅｓｃａｌｅｈａｓｂｅｅｎａｎｉｍｐｏｒｔａｎｔｒｅｓｅａｒｃｈｐｒｏｊｅｃｔｉｎｂｉｏｅｎｇｉｎｅｅｒｉｎｇｐｒｏｄｕｃｔｐｒｏｃｅｓｓｉｎｇ.Ｉｍｍｏｂｉｌｉｚｅｄｍｅｔａｌｉｏｎａｆｆｉｎｉｔｙｃｈｒｏｍａｔｏｇｒａｐｈｙ(ＩＭＡＣ)ｉｓａｎｅｆｆｉｃｉｅｎｔｍｅｔｈｏｄｅｘｔｅｎｓｉｖｅｌｙｕｓｅｄｆｏｒａｆｆｉｎｉｔｙｐｕｒｉｆｉｃａｔｉｏｎｏｆｂｉｏｌｏｇｉｃａｌｌｙａｃｔｉｖｅｓｕｂｓｔａｎｃｅ…