Copper(I)‐Catalyzed Cycloaddition of Azides to Multiple Alkynes: A Selectivity Study Using a Calixarene Framework

Copper(I)‐catalyzed addition of limited amounts of azides to multiple alkynes, which led to statistical mixtures of triazole/acetylene derivatives or, in other cases, resulted in preferred formation of multiple triazoles, was studied at pre‐organizable calixarene platforms bearing up to four propargyl groups. Depending on calixarene structures and reaction conditions, the unprecedented specific or selective formation of exhaustively triazolated calixarenes or a complete loss of the selectivity were observed. Both autocatalytic copper activation and a local copper(I) concentration increase due to copper–triazole complexation were thoroughly studied as the most expected reasons for the selectivity and both were disproved. Mixed triazolated/propargylated calixarenes and their copper(I) complexes proved not to be involved in the cascade‐like process that was modeled to be driven by an intramolecular transfer of two copper(I) ions from a just‐formed binuclear copper intermediate to the adjacent acetylene unit.     

Immobilized polytriazole complexes of copper(I) onto graphene oxide as a recyclable nanocatalyst for synthesis of triazoles

An efficient solid‐supported catalyst for the Huisgen [3 + 2] cycloaddition reaction between azides and alkynes was prepared from copper(I) iodide and 1,2,3‐triazole‐functionalized graphene oxide. This catalyst was then used for the efficient synthesis of β‐hydroxy‐1,2,3‐triazoles giving access to these products in excellent yields. In this protocol, the catalyst was shown to have high activity, air‐stability and recyclability. The formation of copper triazolide is very straightforward and energetically desirable. The catalyst can be isolated from copper‐catalysed azide–alkyne cycloaddition reactions.     

On the Mechanism of Copper(I)‐Catalyzed Azide–Alkyne Cycloaddition

The copper(I)‐catalyzed azide–alkyne cycloaddition (CuAAC) reaction regiospecifically produces 1,4‐disubstituted‐1,2,3‐triazole molecules. This heterocycle formation chemistry has high tolerance to reaction conditions and substrate structures. Therefore, it has been practiced not only within, but also far beyond the area of heterocyclic chemistry. Herein, the mechanistic understanding of CuAAC is summarized, with a particular emphasis on the significance of copper/azide interactions. Our analysis concludes that the formation of the azide/copper(I) acetylide complex in the early stage of the reaction dictates the reaction rate. The subsequent triazole ring‐formation step is fast and consequently possibly kinetically invisible. Therefore, structures of substrates and copper catalysts, as well as other reaction variables that are conducive to the formation of the copper/alkyne/azide ternary complex predisposed for cycloaddition would result in highly efficient CuAAC reactions. Specifically, terminal alkynes with relatively low pK_a values and an inclination to engage in π‐backbonding with copper(I), azides with ancillary copper‐binding ligands (aka chelating azides), and copper catalysts that resist aggregation, balance redox activity with Lewis acidity, and allow for dinuclear cooperative catalysis are favored in CuAAC reactions. Brief discussions on the mechanistic aspects of internal alkyne‐involved CuAAC reactions are also included, based on the relatively limited data that are available at this point.     

Experimental investigation on the mechanism of chelation-assisted, copper(II) acetate-accelerated azide-alkyne cycloaddition

A mechanistic model is formulated to account for the high reactivity of chelating azides (organic azides capable of chelation-assisted metal coordination at the alkylated azido nitrogen position) and copper(II) acetate (Cu(OAc)(2)) in copper(II)-mediated azide-alkyne cycloaddition (AAC) reactions. Fluorescence and (1)H NMR assays are developed for monitoring the reaction progress in two different solvents, methanol and acetonitrile. Solvent kinetic isotopic effect and premixing experiments give credence to the proposed different induction reactions for converting copper(II) to catalytic copper(I) species in methanol (methanol oxidation) and acetonitrile (alkyne oxidative homocoupling), respectively. The kinetic orders of individual components in a chelation-assisted, copper(II)-accelerated AAC reaction are determined in both methanol and acetonitrile. Key conclusions resulting from the kinetic studies include (1) the interaction between copper ion (either in +1 or +2 oxidation state) and a chelating azide occurs in a fast, pre-equilibrium step prior to the formation of the in-cycle copper(I)-acetylide, (2) alkyne deprotonation is involved in several kinetically significant steps, and (3) consistent with prior experimental and computational results by other groups, two copper centers are involved in the catalysis. The X-ray crystal structures of chelating azides with Cu(OAc)(2) suggest a mechanistic synergy between alkyne oxidative homocoupling and copper(II)-accelerated AAC reactions, in which both a bimetallic catalytic pathway and a base are involved. The different roles of the two copper centers (a Lewis acid to enhance the electrophilicity of the azido group and a two-electron reducing agent in oxidative metallacycle formation, respectively) in the proposed catalytic cycle suggest that a mixed valency (+2 and +1) dinuclear copper species be a highly efficient catalyst. This proposition is supported by the higher activity of the partially reduced Cu(OAc)(2) in mediating a 2-picolylazide-involved AAC reaction than the fully reduced Cu(OAc)(2). Finally, the discontinuous kinetic behavior that has been observed by us and others in copper(I/II)-mediated AAC reactions is explained by the likely catalyst disintegration during the course of a relatively slow reaction. Complementing the prior mechanistic conclusions drawn by other investigators, which primarily focus on the copper(I)/alkyne interactions, we emphasize the kinetic significance of copper(I/II)/azide interaction. This work not only provides a mechanism accounting for the fast Cu(OAc)(2)-mediated AAC reactions involving chelating azides, which has apparent practical implications, but suggests the significance of mixed-valency dinuclear copper species in catalytic reactions where two copper centers carry different functions.     

Modulating catalytic activity of polymer‐based cuAAC “click” reactions

The copper(I)‐catalyzed azide–alkyne cycloaddition (CuAAC) reaction is used to synthesize complex polymer architectures. In this work, we demonstrate the control of this reaction at 25 °C between polystyrene (PSTY) chains through modulating the catalytic activity by varying the combinations of copper source (i.e., Cu(I)Br or copper wire), ligand (PMDETA and/or triazole ligand), and solvent (toluene or DMF). The fastest rate of CuAAC was found using Cu(I)Br/PMDETA ligand in toluene, reaching near full conversion after 15 min at 25 °C. For the same catalysts system, DMF also gave fast rates of “click” (95% conversion in 25 min). Cu(0) wire in toluene gave a conversion of 98% after 600 min, a much higher rate than that observed for the same catalyst system used in DMF. When the PSTY had a chemically bound triazole ring close to the site of reaction, the rate of CuAAC in toluene increased significantly, 97% in 180 min at 25 °C, in agreement with our previously published results. This suggests that rapid rates can be obtained using copper wire and will have direct applications to the synthesis of compound where air, removal of copper, and reuse of the copper catalyst are required. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Boronic Acid Catalysis for Mild and Selective [3+2] Dipolar Cycloadditions to Unsaturated Carboxylic Acids

Herein, the concept of boronic acid catalysis (BAC) for the activation of unsaturated carboxylic acids is applied in several classic dipolar [3+2] cycloadditions involving azides, nitrile oxides, and nitrones as partners. These cycloadditions can be used to produce pharmaceutically interesting, small heterocyclic products, such as triazoles, isoxazoles, and isoxazolidines. These cycloadducts are formed directly and include a free carboxylic acid functionality that can be employed for further transformations, thereby avoiding prior masking or functionalization. In all cases, BAC provides faster reactions, under milder conditions, with much improved product yields and regioselectivities. In some instances, such as triazole formation from the reaction of azides with 2‐alkynoic acids, catalysis with ortho‐nitrophenylboronic acid circumvents the undesirable product decarboxylation observed when using thermal activation. By using NMR spectroscopic studies, the boronic acid catalyst was shown to provide activation by a LUMO‐lowering effect in the unsaturated carboxylic acid, likely via a monoacylated hemiboronic ester intermediate.     

Copper(I)-doped Wyoming’s montmorillonite for the synthesis of disubstituted 1,2,3-triazoles

A new catalytic system based on copper(I)-doped Wyoming’s montmorillonite was elaborated. This system was studied and was found to catalyze the formation of 1,4-disubstituted 1,2,3-triazoles when starting from azides and alkynes. It was used for the synthesis of a few triazole derivatives to show its usefulness.     

Fixed-charge labels for simplified reaction analysis: 5-hydroxy-1,2,3-triazoles as byproducts of a copper(I)-catalyzed click reaction

High-resolution multistage mass spectrometric studies of isotope-labelled derivatives of a fixed-charge labelled sugar triazole assisted the identification of 5-hydroxy-1,2,3-triazoles as byproducts of the copper(I)-catalyzed cycloaddition of azides and terminal alkynes. Reaction optimization with inclusion of the auxiliary ligand, tris(benzyltriazolylmethyl)amine furnished an improved ligation protocol in which formation of the 5-hydroxytriazole is mitigated.     

Copper‐Chelating Azides for Efficient Click Conjugation Reactions in Complex Media

The concept of chelation‐assisted copper catalysis was employed for the development of new azides that display unprecedented reactivity in the copper(I)‐catalyzed azide–alkyne [3+2] cycloaddition (CuAAC) reaction. Azides that bear strong copper‐chelating moieties were synthesized; these functional groups allow the formation of azide copper complexes that react almost instantaneously with alkynes under diluted conditions. Efficient ligation occurred at low concentration and in complex media with only one equivalent of copper, which improves the biocompatibility of the CuAAC reaction. Furthermore, such a click reaction allowed the localization of a bioactive compound inside living cells by fluorescence measurements.     

Reusable polymer-supported catalyst for the [3+2] Huisgen cycloaddition in automation protocols

[reaction: see text] A polymer-supported catalyst for Huisgen's [3+2] cycloaddition reaction between azides and alkynes was prepared from copper(I) iodide and Amberlyst A-21. This catalyst was then used in an automated synthesis of 1,4-disubstituted 1,2,3-triazoles giving access to these products in good yields. The catalyst has shown good activity, stability, and recycling capabilities.     

Electrochemically Generated Copper(I)-Catalyzed Click Chemistry: Triazole Synthesis and Insights into Their Photophysical Properties

Herein, we report the electro-click (e-CLICK) reaction via electrochemically generated copper(I) catalytic species. The reaction worked under constant potential electrolysis (−0.25 V) with copper(II) nitrate and 2,2′-bipyridine serving as pre-catalyst and ligand respectively. The reaction accommodates electronically different organic azides and terminal alkynes to afford 1,2,3-triazoles in good synthetic yields with excellent 1,4-regioselectivity. Compared to traditional click chemistry, the developed e-CLICK methodology avoids the use of external reducing agents such as sodium ascorbate. Absorptive properties of selected triazole products were assessed by UV-visible electronic spectra. Triazole ( 3 e ) was further applied for the spectrophotometric detection of Co²⁺ and Cu²⁺ species.     

Enantioselective Copper‐Catalyzed Azide–Alkyne Click Cycloaddition to Desymmetrization of Maleimide‐Based Bis(alkynes)

A copper catalyst system derived from TaoPhos and CuF₂ was used successfully for catalytic asymmetric Huisgen [3+2] cycloaddition of azides and alkynes to give optically pure products containing succinimide‐ and triazole‐substituted quaternary carbon stereogenic centers. The desired products were obtained in good yields (60–80 %) and 85:15 to >99:1 enantiomeric ratio (e.r.) in this click cycloaddition reaction.     

Catalytic "active-metal" template synthesis of [2]rotaxanes, [3]rotaxanes, and molecular shuttles, and some observations on the mechanism of the cu(i)-catalyzed azide-alkyne 1,3-cycloaddition

A synthetic approach to rotaxane architectures is described in which metal atoms catalyze covalent bond formation while simultaneously acting as the template for the assembly of the mechanically interlocked structure. This "active-metal" template strategy is exemplified using the Huisgen-Meldal-Fokin Cu(I)-catalyzed 1,3-cycloaddition of azides with terminal alkynes (the CuAAC "click" reaction). Coordination of Cu(I) to an endotopic pyridine-containing macrocycle allows the alkyne and azide to bind to metal atoms in such a way that the metal-mediated bond-forming reaction takes place through the cavity of the macrocycle--or macrocycles--forming a rotaxane. A variety of mono- and bidentate macrocyclic ligands are demonstrated to form [2]rotaxanes in this way, and by adding pyridine, the metal can turn over during the reaction, giving a catalytic active-metal template assembly process. Both the stoichiometric and catalytic versions of the reaction were also used to synthesize more complex two-station molecular shuttles. The dynamics of the translocation of the macrocycle by ligand exchange in these two-station shuttles could be controlled by coordination to different metal ions (rapid shuttling is observed with Cu(I), slow shuttling with Pd(II)). Under active-metal template reaction conditions that feature a high macrocycle:copper ratio, [3]rotaxanes (two macrocycles on a thread containing a single triazole ring) are also produced during the reaction. The latter observation shows that under these conditions the mechanism of the Cu(I)-catalyzed terminal alkyne-azide cycloaddition involves a reactive intermediate that features at least two metal ions.     

A fluorogenic ‘click’ reaction of azidoanthracene derivatives

Fluorogenic reactions have broad applications in biolabeling, combinatorial synthesis of fluorescent dyes, and materials development. It was recently reported that the highly selective and efficient Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAC) reaction can be employed in designing new types of fluorogenic reactions. In this study, we report a fluorogenic reaction using anthracene azides as starting materials. The fluorescence of the anthryl core can be greatly inhibited upon introducing electron-donating azido groups in the proximity. Such weakly fluorescent anthracene azides demonstrate high reactivity with a variety of alkynes under the CuAAC conditions producing a strongly fluorescent triazole product with high quantum yields. This reaction can be used in the synthesis and screening of fluorescent dyes combinatorially. Compared with most existing methods, the fluorogenic CuAAC reaction is a much milder and simpler technique to prepare large libraries of fluorescent dyes without further purification. In order to demonstrate the efficiency of using anthracene azides for biolabeling applications, both small molecules and biomolecules including the multialkyne-derivatized cowpea mosaic virus and tobacco mosaic virus had been studied.     

A highly active and reusable copper(I)-tren catalyst for the "click" 1,3-dipolar cycloaddition of azides and alkynes

The copper(I) complex [Cu(C18(6)tren)]Br 1 (C18(6)tren = tris(2-dioctadecylaminoethyl)amine) which exhibits a good stability towards aerobic conditions is a versatile, highly reactive and recyclable catalyst for the Huisgen cycloaddition of azides with terminal or internal alkynes and is a useful catalyst for the preparation of "click" dendrimers.     

Copper, nickel, and zinc cyclam-amino acid and cyclam-peptide complexes may be synthesized with "click" chemistry and are noncytotoxic

We describe the synthesis of cyclam metal complexes derivatized with amino acids or a tripeptide using a copper(I)-catalyzed Huisgen "click" reaction. The linker triazole formed during the synthesis plays an active coordinating role in the complexes. The reaction conditions do not racemize the amino acid stereocenters. However, a methylene group adjacent to the triazole is susceptible to H/D exchange under ambient conditions, an observation which has potentially important implications for structures involving stereocenters adjacent to triazoles in click-derived structures. The successful incorporation of several amino acids is described, including reactive tryptophan and cysteine side chains. All complexes are formed rapidly upon introduction of the relevant metal salt, including synthetically convenient cases where trifluoroacetate salts of cyclam derivatives are used directly in the metalation. None of the metal complexes displayed any cytotoxicity to mammalian cells, suggesting that the attachment of such complexes to amino acids and peptides does not induce toxicity, further supporting their potential suitability for labeling/imaging studies. One Cu(II)-cyclam-triazole-cysteine disulfide complex displayed moderate activity against MCF-10A breast nontumorigenic epithelial cells.     

Synthesis and Antibacterial Evaluation of 1,2,3‐Triazole‐based Quinazolines Using Click Chemistry in the Presence of Salophen Schiff Base Ligand

The reaction of 2‐chloro‐4‐(prop‐2‐ynyloxy)quinazoline or 2‐chloro‐N‐(prop‐2‐ynyl)quinazolin‐4‐amine with aromatic azides in the presence of the salophen Schiff base ligand afforded new derivatives of 1,2,3‐triazole‐based quinazoline scaffold in high‐to‐excellent reaction yields. The main advantage of this procedure is that the toxicity of the copper catalyst used could be decreased to 2 mol% by complexation with the salophen ligand. All the synthesized compounds were screened for their in vitro antibacterial activities against the Gram‐positive and Gram‐negative bacteria using the well‐diffusion method.     

Biodegradable microcapsules designed via 'click' chemistry

Dextrans modified with alkyne and azide groups through hydrolysable carbonate esters form degradable microcapsules after Cu(I) catalysed 'click' reaction between azides and alkynes yielding triazole cross-links.     

Peptidotriazoles on solid phase: [1,2,3]-triazoles by regiospecific copper(i)-catalyzed 1,3-dipolar cycloadditions of terminal alkynes to azides

The cycloaddition of azides to alkynes is one of the most important synthetic routes to 1H-[1,2,3]-triazoles. Here a novel regiospecific copper(I)-catalyzed 1,3-dipolar cycloaddition of terminal alkynes to azides on solid-phase is reported. Primary, secondary, and tertiary alkyl azides, aryl azides, and an azido sugar were used successfully in the copper(I)-catalyzed cycloaddition producing diversely 1,4-substituted [1,2,3]-triazoles in peptide backbones or side chains. The reaction conditions were fully compatible with solid-phase peptide synthesis on polar supports. The copper(I) catalysis is mild and efficient (>95% conversion and purity in most cases) and furthermore, the X-ray structure of 2-azido-2-methylpropanoic acid has been solved, to yield structural information on the 1,3-dipoles entering the reaction. Novel Fmoc-protected amino azides derived from Fmoc-amino alcohols were prepared by the Mitsunobu reaction.     

SiO2-NHC-Cu(I): an efficient and reusable catalyst for [3+2] cycloaddition of organic azides and terminal alkynes under solvent-free reaction conditions at room temperature

A novel SiO₂-NHC-Cu(I) 3b was developed and used as a highly efficient catalyst for [3+2] cycloaddition of organic azides and terminal alkynes. In the presence of SiO₂-NHC-Cu(I) 3b (1 mol %), the reactions of terminal alkynes with organic azides underwent smoothly to generate the corresponding regiospecific 1,4-disubstituted 1,2,3-triazoles in excellent yields under solvent-free reaction conditions at room temperature. Furthermore, catalyst 3b was quantitatively recovered from the reaction mixture by a simple filtration and reused for 10 cycles without loss of its activity.