常见炸药的稳定同位素比值分析方法研究进展

炸药的深度比对与溯源对于爆炸案事件的侦破具有重大意义,以不同地域来源的原料或不同生产工艺生产的炸药,其组成元素的稳定同位素比值具有差异,因而稳定同位素比值可作为炸药深度比对与溯源的重要指标.稳定同位素比值质谱法(IRMS)作为一种高精度的稳定同位素比值测量手段,已逐渐发展成熟,与元素分析仪、气相色谱仪、液相色谱仪等仪器...     

稳定性氢同位素分析在牛肉产地溯源中的应用

探讨了利用高温热解炉和同位素比率质谱仪(IRMS)联用测定肉品中稳定性氢同位素比率的方法,并利用此方法测定了我国不同地域来源脱脂牛肉、牛尾毛中氢同位素比率.分析了牛组织中氢同位素组成与地域经度、纬度及海拔高度变化的关系,以及稳定性氢同位素用于牛肉产地溯源的可行性.结果表明,不同地域来源牛组织中δ2H值的差异显著,其与当地饮水中氢同位素组成密切相关,而且有随着地理纬度增加而减小的趋势; 牛尾毛与牛肉中δ2H值的相关性显著.稳定性氢同位素是用于牛肉产地溯源的一项很有潜力的指标,且牛肉和牛尾毛中的氢同位素组成均可反映牛来源地的信息.     

Stable isotope variation as a tool to trace the authenticity of beef

Organic beef coming principally from Germany was analysed for the hydrogen, carbon, oxygen, nitrogen and sulfur stable isotopic composition to test the possibility of tracing back the geographical origin. Since there is a well-known pattern of D/H and ¹⁸O/¹⁶O in meteoric water and in ground water, there is an existing link to tissue water in the beef. By including the stable isotope ratios of the other elements of life further information is available: soils show different isotope ratios of ¹⁵N/¹⁴N and ³⁴S/³²S depending on the geological composition, cultivation and atmospheric sulfur deposition. As organic farming is mainly obliged to use only their produced fodder, that ratio is reflected in the beef as well.Different organic beef samples from various German farms have been collected and analysed over nearly two years. To check the differentiation of foreign beef, samples from Argentina and Chile were also included in the study. The analyses of meat samples indicate that it is possible to trace back the region (e.g. Argentina and Germany) by using isotopes of oxygen and hydrogen. A local geographical differentiation can be done by using the stable isotopes of nitrogen and sulfur, as was demonstrated for three farms in Colonia Bay. An optimal differentiation also depends on the quality of further information (e.g. the season, kind of cattle breeding or the declaration of the local geographical origin). Certainly authenticity of beef is not only linked with the geographical origin but can also reflect the differentiation of organic and conventional farming. The fodder of organic cattle farming consists mainly of C₃ plants and the use of C₄ plants is more usual in conventional cattle farming. A ¹³C/¹²C ratio above –20 appears as a limit for organic farming. Increased values have to be controlled based on their authenticity.     

Sr isotope measurements in beef—analytical challenge and first results

The strontium isotope ratio ((87)Sr/(86)Sr) in beef, derived from 206 European cattle, has been measured. These cattle were located in 12 different European regions within France, Germany, Greece, Ireland, Italy, Spain and the UK. As animal protein is known to be a difficult material on which to conduct Sr isotope analysis, several investigations were undertaken to develop and improve the sample preparation procedure. For example, Sr isotope analysis was performed directly on freeze-dried meat and defatted dry mass from the same samples. It was found that enormous differences-sometimes exceeding the measurement uncertainty-could occur between the fractions and also within one sample even if treated in the same manner. These variations cannot be definitely allocated to one cause but are most likely due to inhomogeneities caused by physiological and biochemical processes in the animals as post mortem contamination during analytical processing could be excluded. For further Sr isotope measurements in meat, careful data handling is recommended, and for the authentic beef samples within this project, it was decided to use only freeze-dried material. It can be demonstrated, however, that Sr isotope measurements in beef proteins are a valuable tool for authentication of geographic origin. Although partly overlapping, some of the European sampling sites could be discriminated even by only using (87)Sr/(86)Sr.     

Alteration of the carbon and nitrogen stable isotope composition of beef by substitution of grass silage with maize silage

This study investigated the effect of substituting grass silage (C3 photosynthetic plant product) with maize silage (C4 photosynthetic plant product) on the natural abundance carbon (delta13C) and nitrogen (delta15N) stable isotope composition of bovine muscle tissue. Forty-five continental crossbred heifers were assigned to one of three diets consisting of 3 kg of a barley-based concentrate plus grass silage, maize silage or an equal mixture (dry matter basis) of grass silage and maize silage, fed ad libitum, for 167 days. Substitution resulted in less negative delta13C values (P<0.001) in lipid-free muscle and in lipid, and also a lower delta15N (P<0.001) in lipid-free muscle. Feeding of maize silage was clearly reflected in the delta13C of muscle, with each 10% difference in the dietary C4 carbon intake resulting in a 0.9 to 1.0 per thousand shift of delta13C in lipid-free muscle and a 1.0 to 1.2 per thousand in lipid. Minimum detectable mean differences (95% confidence, power 0.80, n=15) in this experiment were about 0.5 per thousand and 1.0 per thousand for delta13C of lipid-free muscle and lipid, respectively, and about 0.5 per thousand for delta15N of lipid-free muscle. The power analysis presented here is useful for estimating minimum isotopic differences that can be detected between any two groups of beef samples with a given number of replicates. It is concluded that carbon stable isotope ratio analysis of meat can be used to quantify C3/C4 dietary constituents in beef production.     

Stable carbon, nitrogen, and oxygen isotope analysis as a potential tool for verifying geographical origin of beef

Stable isotope analysis of organic elements such as carbon and nitrogen has been employed as a powerful tool for provenance determination of food materials, because isotopic compositions of the materials reflect many factors in natural environment. In this study, we examined carbon, nitrogen, and oxygen isotope signatures of beef from Australia, Japan, and USA, in order to confirm the method as a potential tool for verifying geographical origin of beef commercially distributed in Japan. Defatted dry matter of beef from USA was characterized by higher carbon isotopic composition (-13.6 per thousand to -11.1 per thousand) than that from Japan (-19.6 per thousand to -17.0 per thousand) and Australia (-23.6 per thousand to -18.7 per thousand). That from Australia was characterized by higher oxygen isotopic composition (+15.0 per thousand to +19.4 per thousand) than that from Japan (+7.3 per thousand to +13.6 per thousand) and USA (+9.5 per thousand to +11.7 per thousand). The oxygen isotopic composition in Japanese beef showed a positive correlation with the isotopic composition of cattle drinking water, the difference in which is clearly latitude dependent. These results suggest that a comparison of carbon, nitrogen, and oxygen isotopic compositions is applicable as a potential tool to discriminate the provenance of beef not only between different countries (i.e. Australia, Japan, and USA) but also among different regions within Japan.     

A simple rapid method to precisely determine 13C/12C ratios of plant methoxyl groups

Stable isotope ratios of individual plant components have become a valuable tool for the determination of the geographical origin and authenticity of foodstuff. A recently published method with considerable potential in this context is the measurement of the deuterium/hydrogen (D/H) isotope ratios of plant matter methoxyl groups. The method entailed cleavage of methyl ethers or esters with hydriodic acid (HI) to form gaseous methyl iodide (CH₃I) and then measurement of the δ²H value of this gas. Here, as a follow up to a previous study, we describe a method for the rapid and precise δ¹³C analysis of plant matter methoxyl groups using gas chromatography/combustion/isotope ratio mass spectrometry (GC/C/IRMS). Conditions for sample preparation were investigated for isotope discrimination effects, the GC conditions optimized, the reproducibility of the measurement of standards undertaken, and the precision of the method defined. The reproducibility of the δ¹³C value determined for a CH₃I standard on 20 consecutive measurements was found to be 0.17‰. The method was also tested on four methoxyl‐rich plant components: vanillin, lignin, wood and pectin. The analytical precision obtained, expressed as the average standard deviation, for these compounds was found to be better than 0.13‰. The described procedure which is simple and rapid, allowing preparation and analysis of a sample within 1 h, produces accurate and reproducible isotopic measurements. We suggest that this validated δ¹³C method when employed together with the recently published δ²H method for two‐dimensional stable isotope studies of organic matter containing methoxyl groups will be of considerable value, e.g. for proving the authenticity of foodstuff. Copyright © 2009 John Wiley & Sons, Ltd.     

Simplified batch equilibration for D/H determination of non‐exchangeable hydrogen in solid organic material

Hydrogen isotopic analysis of organic materials has been widely applied in studies of paleoclimate, animal migration, forensics, food and flavor authentication, and the origin and diagenesis of organic matter. Hydrogen bound to carbon (C‐H) generally retains isotopic information about the water present during organic matter synthesis and associated biosynthetic fractionations, but hydrogen bound to other elements (O, S, or N) can readily exchange with atmospheric water vapor and reflects recent exposure to water or vapor. These two pools must be separated to obtain meaningful information from isotope ratios of organic materials. Previously published analytical methods either replace exchangeable H chemically or control its isotopic composition, usually by equilibration with water or waters of known isotopic composition. In addition, the fraction of H that is exchangeable can vary among samples and is itself of scientific interest. Here we report an improved and automated double‐equilibration approach. Samples are loaded in a 50‐position autosampler carousel in an air‐tight aluminum equilibration chamber. Water vapor of known isotopic composition is pumped through the chamber at 115°C for at least 6 h. After flushing with dry N₂ and being cooled, the carousel is rapidly transferred from the equilibration chamber to a He‐purged autosampler attached to a pyrolysis elemental analyzer connected to an isotope ratio mass spectrometer. By equilibrating two aliquots of each sample with two isotopically distinct waters, it is possible to calculate both (1) the D/H ratio of non‐exchangeable H, and (2) the fraction of H that is exchangeable. Relative to previous double‐equilibration techniques, this approach offers significant reductions in sample size and labor by allowing simultaneous equilibration of several tens of samples. Copyright © 2009 John Wiley & Sons, Ltd.     

Bulk and compound-specific isotopic characterisation of illicit heroin and cling film

Comparative analysis involves various but complementary methods and can be used for forensic intelligence purposes to group seizures of heroin into batches. Much forensic analysis now combines expertise in the traditional area of drugs investigation with a detailed understanding of supply, packaging, distribution, and drugs intelligence. It was the intention of this research to determine whether illicit heroin seizures and packaging material can be grouped according to isotopic compositions, and to explore factors that affect the isotopic compositions. In order to achieve these aims, 14 samples of seized heroin, thirteen provided by Avon and Somerset Constabulary (UK), were analysed by elemental analysis/isotope ratio mass spectrometry (EA/IRMS) and gas chromatography/combustion/isotope ratio mass spectrometry (GC/C/IRMS) for carbon and hydrogen isotopes. These tests elucidated that a combination of the delta13C, delta15N, delta18O and delta2H results from EA/IRMS is able to distinguish between most samples of bulk heroin. We speculate that the delta13C values of the alkaloids, obtained by GC/C/IRMS, give indications of different geographical or temporal origins of some of the heroin samples. GC/C/IRMS of the cutting agent, caffeine, provides a means to link dilution events. Fifteen retail cling film samples and seven cling film samples from heroin seizures were analysed by EA/IRMS. A multivariate comparison of the carbon, hydrogen and oxygen isotope ratios was able to distinguish between most of the samples. This technique enabled the cling films from the heroin to be grouped according to seizure. Three solvents were tested on two samples of cling film of known composition. Methanol and chloroform were both found to extract material from PVC and from non-PVC cling films. Water-treated PVC was indistinguishable from the untreated PVC and thus water was found to be the most suitable solvent when washing cling film prior to IRMS analysis.     

The Impact of Grape Varieties to Wine Isotopic Characterization

This paper highlights the results of a study regarding the impact of geo-climatic conditions, the influence of grape varieties, and harvest year on the isotopic characterization of a wine from a specific vineyard area, using stable isotope ratio analysis by continuous flow mass spectrometry CF-IRMS. This analytical technique has made a significant contribution on wine characterization, by proving the botanical and geographical origin of the wine raw material.

A great variability was observed to sap ¹⁸O and ²H isotopic ratios for different types of vine (Vitis vinifera plant) from the studied area, Dealu Mare-Valea Calugareasca, reflecting the significant influence of variety on isotopic features. On the other hand, the comparison of stable isotopic fingerprints for rainfall water and sap revealed a close approximation value for ¹⁸O isotopic ratio, and an insignificant variation coefficient of ¹³C isotopic ratio in wine varieties (about 2.85%).

The results of isotopic characterization for grape vine sap and original wines for different varieties existing in Dealu Mare-Valea Calugareasca vineyard indicates the relevance of meteorological and viticulture parameters like precipitation, date of vintage, and grape cultivar for wine authentication process.     

Stable isotope ratio measurements of royal jelly samples for controlling production procedures: impact of sugar feeding

The carbon and nitrogen stable ratios of royal jelly (RJ) samples from various origins are determined using an elemental analyser linked online to an isotope ratio mass spectrometer to evaluate authenticity and adulteration. The (13)C/(12)C and (15)N/(14)N stable isotope ratios are measured in more than 500 RJs (domestic, imported and derived from feeding experiments) in order to obtain isotopic measurements that take into account seasonal, botanical and geographical effects. Authenticity intervals are established for traditional beekeeping practices, without feeding, in the range -22.48 to -27.90‰ for δ(13)C. For these samples, the δ(15)N values range from -1.58 to 7.98‰, depending on the plant sources of pollen and nectar. The δ(13)C values of the commercial samples vary from -18.54 to -26.58‰. High δ(13)C values are typical of sugar cane or corn syrups which have distinctive isotopic (13)C signatures because both plants use the C4 photosynthetic cycle, in contrast to most RJs which are derived from C3 plants. These differences in the (13)C-isotopic composition allow the detection of the addition of such sugars. RJs from traditional sources and from industrial production by sugar feeding are thus successfully distinguished.     

Geographical traceability of wheat and its products using multielement light stable isotopes coupled with chemometrics

The present study was aimed to investigate the variation of stable isotopic ratios of carbon, nitrogen, hydrogen, and oxygen in wheat kernel along with different processed fractions from three geographical origins across 5 years using isotope ratio mass spectrometry (IRMS). Multiway ANOVA revealed significant differences among region, harvest year, processing, and their interactions for all isotopes. The region contributed the major variability in the δ¹³C ‰, δ²H ‰, δ¹⁵N ‰, and δ¹⁸O‰ values of wheat. Variation of δ¹³C ‰, δ¹⁵N ‰, and δ¹⁸O ‰ between wheat whole kernel and its products (break, reduction, noodles, and cooked noodles) were ?0.7‰, and no significant difference was observed, suggesting the reliability of these isotope fingerprints in geographical traceability of wheat‐processed fractions and foods. A significant influence of wheat processing was observed for δ²H values. By applying linear discriminant analysis (LDA) to the whole dataset, the generated model correctly classified over 91% of the samples according to the geographical origin. The application of these parameters will assist in the development of an analytical control procedure that can be utilized to control the mislabeling regarding geographical origin of wheat kernel and its products.     

Hydropyrolysis as a preparative method for the compound-specific carbon isotope analysis of fatty acids

Compound-specific stable carbon isotope analysis by gas chromatography/combustion/isotope ratio mass spectrometry is an effective and risk-free means of investigating fatty acid metabolism. Straightforward analysis, however, leads to poor chromatographic resolution, while derivatization adds carbon thereby corrupting the starting stable isotopic composition. Hydropyrolysis is a new approach which defunctionalizes fatty acids to yield the corresponding n-alkanes thus retaining the carbon skeleton intact and improving chromatography, allowing the faithful measurement of carbon isotope ratios.     

Differentiation of the geographical origin of durum wheat semolina samples on the basis of isotopic composition

The identification of the geographical origin of foods is attracting great interest from consumers and producers since it may be used as a criterion for guaranteeing quality and authenticity. Stable isotope techniques can provide useful information on the origin of food products. The natural abundance isotopic ratios of carbon, oxygen and nitrogen were determined and a comparison made between the isotopic content of samples originating from Italy and those of samples originating from other countries (Canada, Turkey, Australia). A correlation was found between the isotopic composition and geographical origin of the samples. The relationship between isotopic content and the latitude has been confirmed.     

Determination of the geographical origin of Brazilian wines by isotope and mineral analysis

In the present research, we studied wines from three different south Brazilian winemaking regions with the purpose of differentiating them by geographical origin of the grapes. Brazil's wide territory and climate diversity allow grape cultivation and winemaking in many regions of different and unique characteristics. The wine grape cultivation for winemaking concentrates in the South Region, mainly in the Serra Gaúcha, the mountain area of the state of Rio Grande do Sul, which is responsible for 90% of the domestic wine production. However, in recent years, two new production regions have developed: the Campanha, the plains to the south and the Serra do Sudeste, the hills to the southeast of the state. Analysis of isotopic ratios of ¹⁸O/¹⁶O of wine water, ¹³C/¹²C of ethanol, and of minerals were used to characterize wines from different regions. The isotope analysis of δ¹⁸O of wine water and minerals Mg and Rb were the most efficient to differentiate the regions. By using isotope and mineral analysis, and discrimination analysis, it was possible to classify the wines from south Brazil.     

Characterization of neutron transmuted zinc traces in pure copper materials by isotope dilution mass spectrometry

The neutron transmutation doping (NTD) of highly pure copper with zinc was investigated as a promising means of achieving controlled gradation of the zinc content in the range 1-20 microg g(-1). The doping process leads to the enrichment of two stable isotopes 64Zn and 66Zn in a ratio which differs from that of natural isotopic distribution. Mass spectrometric investigations by thermal ionization mass spectrometry (TIMS) were performed to validate the results obtained by gamma spectrometry. The investigations included both determination of the isotopic ratios of the doped zinc isotopes and the analysis of the accumulated zinc contents by isotope dilution (ID) analysis. Thereby a sample-specific correction of the blank could be performed because the isotope 68Zn was not influenced, because of the transmutation process. The results obtained by TIMS prove the strict proportionality of the doped zinc content, in the range 5 to 20 microg g(-1), to the neutron fluence. Comparison with gamma spectrometric results showed a very good agreement within the uncertainties.     

Hydropyrolysis of steroids: a preparative step for compound-specific carbon isotope ratio analysis

Compound-specific stable carbon isotope analysis by gas chromatography/combustion/isotope ratio mass spectrometry is an important method for the detection of steroid abuse in athletes. However, steroids in their natural form exhibit poor chromatographic resolution, while derivatization adds carbon thereby corrupting the starting stable isotopic composition. Hydropyrolysis is a new approach, which defunctionalizes steroids but leaves their carbon skeleton intact. The process improves chromatography, allowing the faithful measurement of carbon isotope ratios and enabling a more effective apportionment for the source of steroids and their metabolites.     

Characterization of neutron transmuted zinc traces in pure copper materials by isotope dilution mass spectrometry

The neutron transmutation doping (NTD) of highly pure copper with zinc was investigated as a promising means of achieving controlled gradation of the zinc content in the range 1–20 μg g^–1. The doping process leads to the enrichment of two stable isotopes ⁶⁴Zn and ⁶⁶Zn in a ratio which differs from that of natural isotopic distribution. Mass spectrometric investigations by thermal ionization mass spectrometry (TIMS) were performed to validate the results obtained by gamma spectrometry. The investigations included both determination of the isotopic ratios of the doped zinc isotopes and the analysis of the accumulated zinc contents by isotope dilution (ID) analysis. Thereby a sample-specific correction of the blank could be performed because the isotope ⁶⁸Zn was not influenced, because of the transmutation process. The results obtained by TIMS prove the strict proportionality of the doped zinc content, in the range 5 to 20 μg g^–1, to the neutron fluence. Comparison with gamma spectrometric results showed a very good agreement within the uncertainties.     

Elemental,Isotopic, and Pesticide Analysis of Wild and Cultivated Berries

ABSTRACT

The focus of this study was to investigate differences in isotopic, elemental, and trace pesticide concentrations of wild and cultivated berries from Transylvania. To emphasize differences based on geographical origin, stable isotopic ratios of ²H/¹H, ¹⁸O/¹⁶O, and ¹³C/¹²C were determined by isotopic ratio mass spectrometry. Elemental fingerprinting of berries was performed by inductively coupled plasma mass spectrometry. The determination of trace pesticides in berries was performed by gas chromatography–mass spectrometry. Differences between wild and cultivated berries were evaluated using multivariate statistical analysis. The results suggest that multielemental, isotopic, and trace pesticide fingerprinting is feasible for sample differentiation.     

A method for carbon stable isotope analysis of methyl halides and chlorofluorocarbons at pptv concentrations

A pre-concentration system has been validated for use with a gas chromatography/mass spectrometry/isotope ratio mass spectrometer (GC/MS/IRMS) to determine ambient air (13)C/(12)C ratios for methyl halides (MeCl and MeBr) and chlorofluorocarbons (CFCs). The isotopic composition of specific compounds can provide useful information on their atmospheric budgets and biogeochemistry that cannot be ascertained from abundance measurements alone. Although pre-concentration systems have been previously used with a GC/MS/IRMS for atmospheric trace gas analysis, this is the first study also to report system validation tests. Validation results indicate that the pre-concentration system and subsequent separation technologies do not significantly alter the stable isotopic ratios of the target methyl halides, CFC-12 (CCl(2)F(2)) and CFC-113 (C(2)Cl(3)F(3)). Significant, but consistent, isotopic shifts of -27.5 per thousand to -25.6 per thousand do occur within the system for CFC-11 (CCl(3)F), although the shift is correctible. The method presented has the capacity to separate these target halocarbons from more than 50 other compounds in ambient air samples. Separation allows for the determination of stable carbon isotope ratios of five of these six target trace atmospheric constituents within ambient air for large volume samples (相似文献