Partially nanowire-structured TiO2 electrode for dye-sensitized solar cells

Partially nanowire-structured TiO₂ was prepared by a hydrothermal processing followed by calcination in air. The hydrogen titanate powder as-synthesized was calcined at 300 °C for 4 h to obtain the partially nanowire-structured TiO₂. A dye-sensitized solar cell (DSC) with a film thickness of 5.6 μm, fabricated using the partially nanowire-structured TiO₂ showed better performance than using a fully nanowire-structured TiO₂ or a conventional equi-axed TiO₂ nanopowder. The short-circuit current density (J_SC), the open-circuit voltage (V_OC), the fill factor (FF) and the overall efficiency (η) are 11.9 mA/cm², 0.754 V, 0.673 and 6.01 %, respectively. The effects of one-dimensional nanostructure and electron expressway concept are discussed.     

Addition of TiO2 nanowires in different polymorphs for dye-sensitized solar cells

TiO₂ (B) and TiO₂ anatase nanowires were prepared at 150 °C for 120 h by a hydrothermal method followed by calcination in air at 400 °C for 2 h and at 700 °C for 2 h for TiO₂ (B) and TiO₂ anatase, respectively. Although dye-sensitized solar cells (DSC) with fully nanowire electrodes showed a rather low light-to-electricity conversion efficiency of 1.33 % for TiO₂ (B) and 2.42% for TiO₂ anatase, 10 wt % nanowire-dispersed electrodes in a P-25 TiO₂-nanoparticle matrix demonstrated improved efficiency of 6.17 % for TiO₂ (B) and 6.53% for TiO₂ anatase, these exceeding that of pure P-25 electrodes in this work (η=5.59%). The dominant mechanisms of the improvement at 10 wt% for the two different polymorphs are thought to be different, i.e., a light-scattering and film-thickness increment for the TiO₂ (B) system, whereas there is an improved conduction path through the matrix for the TiO₂ anatase system.      

A novel architecture of poly(tetrafluoroethylene)-framed TiO2 electrodes for dye-sensitized solar cells

A novel architecture of polytetrafluoroethylene (PTFE)-framed TiO₂ electrodes is developed for dye-sensitized solar cells. The PTFE-framed TiO₂ electrodes with various thicknesses have been successfully fabricated, ranging from 20 to 160 μm. The optimal energy conversion efficiency of 9.04% is achieved with a film thickness of 60 μm. The PTFE-framed structure not only provides tunable film thickness but a reliable and cost-effective way for the mass production of photo-electrodes.     

Improved charge transport in dye-sensitized solar cells employing viscous non-volatile electrolytes

Dye-sensitized solar cells (DSSCs) employing a viscous non-volatile electrolyte were prepared by utilizing anatase TiO₂ nanorods (synthesized via oriented attachment) as a photoanode material. One promising way to enhance the photovoltaic performance of DSSCs employing viscous electrolytes is to increase ion conductivity by increasing the salt concentration. This is accompanied by an acceleration of the charge recombination reaction and the limiting of the overall conversion efficiency. The results showed that a TiO₂ nanorod electrode enables more favorable electron transport than a conventional nanoparticle-based electrode due to the improved electron diffusion length and the large intrinsic surface area.     

两步电泳沉积制备TiO2光阳极用于高效染料敏化太阳能电池

采用不同沉积电压制备TiO₂光阳极,研究电压对薄膜沉积速率、厚度和形貌的影响。通过台阶仪、光学照片、扫描电子显微镜（SEM）、电化学交流阻抗谱、开路电压衰减曲线对光阳极和电池进行系统表征,并测试了染料敏化太阳能电池器件的电流密度-电压（J-V）曲线,计算其光电转换效率。结果表明,提高沉积电压时,光阳极薄膜的沉积速率加快,膜厚也增加,但是电压过高时,薄膜会有裂缝和覆盖不全的问题,这会对电池的效率造成负面影响。综合考虑低沉积电压条件下薄膜均匀无裂缝和高沉积电压条件下沉积速率快的优点,采用先30 V电压、后60 V电压的电泳沉积方式来制备光阳极,结果呈现协同效果,既降低了制备时间又得到高质量的薄膜,在无其他修饰的情况下,电池的光电转换效率可以达到7.29%。     

两步电泳沉积制备TiO2光阳极用于高效染料敏化太阳能电池

采用不同沉积电压制备TiO₂光阳极,研究电压对薄膜沉积速率、厚度和形貌的影响。通过台阶仪、光学照片、扫描电子显微镜(SEM)、电化学交流阻抗谱、开路电压衰减曲线对光阳极和电池进行系统表征,并测试了染料敏化太阳能电池器件的电流密度-电压(J-V)曲线,计算其光电转换效率。结果表明,提高沉积电压时,光阳极薄膜的沉积速率加快,膜厚也增加,但是电压过高时,薄膜会有裂缝和覆盖不全的问题,这会对电池的效率造成负面影响。综合考虑低沉积电压条件下薄膜均匀无裂缝和高沉积电压条件下沉积速率快的优点,采用先30 V电压、后60 V电压的电泳沉积方式来制备光阳极,结果呈现协同效果,既降低了制备时间又得到高质量的薄膜,在无其他修饰的情况下,电池的光电转换效率可以达到7.29%。     

Preparation of nanocrystalline TiO2 thin film at low temperature and its application in dye-sensitized solar cell

The electrophoretic deposition combined with common pressure hydrothermal treatment was employed to prepare nanocrystalline TiO₂ thin film from suspension of tetra-n-butyl titanate and P25 at low temperature. The tetra-n-butyl titanate was hydrolyzed and crystallized into anatase to interconnect nanocrystalline TiO₂ particles and to stick them to a conductive substrate by common pressure hydrothermal treatment to improve the electron transport properties of the deposited thin film. A dye-sensitized solar cell based on TiO₂ thin film prepared by the low temperature method yielded the conversion efficiency of 6.12%. Due to the relative slower electron transport rate in the deposited film, its conversion efficiency was slightly lower than that of the cell with TiO₂ thin film prepared by the conventional high temperature sintering method. Since it is free of high temperature sintering step, this method can be used to prepare nanocrystalline TiO₂ thin film on plastic polymer conductive substrate for fabrication of flexible dye-sensitized solar cell.     

TiO2 nanorods branched on fast-synthesized large clearance TiO2 nanotube arrays for dye-sensitized solar cells

A large clearance TiO₂ nanotube arrays (LTAs) has been synthesized by a not more than 12 h anodization duration and based on this a branched TiO₂ nanotube arrays (BLTs) has been achieved through TiO₂ nanorods branch-like grown on the LTAs. Some key factors and probable mechanisms of the fabrication processes on two novel nanoarchitectures are discussed. Exhilaratingly, it is found that the obtained LTAs has demonstrated large pore diameter and void spaces (pore diameter ∼350 nm; void spaces ∼160 nm; and tube length ∼3.5 μm), and the synthesized hierarchical BLTs, compared with conventional TiO₂ nanotube arrays, has shown a much stronger dye absorption performance and an approximately double of the solar cell efficiency (in our case from 1.62% to 3.18% under simulated AM 1.5 conditions).     

Advanced composite gel electrolytes prepared with titania nanotube fillers in polyethylene glycol for the solid-state dye-sensitized solar cell

A novel inorganic–organic composite solid electrolyte is prepared by using TiO₂ nanotubes (TiNTs) as filler in polyethylene glycol (PEG) and effectively used for the fabrication of solid-state dye-sensitized solar cells (DSSCs). Comparably high conversion efficiency 4.43% has been observed by using the newly designed inorganic–organic (PEG–TiNTs) composite solid electrolyte. By performing several experiments by using PEG–TiNTs composite solid electrolytes, it was observed that the appropriate ratios of TiNTs and PEG are important to obtain higher conversion efficiency. Moreover, the morphologies, chemical interactions of PEG and TiNTs and their performance to the DSSCs are studied extensively by FESEM, DSC, and XPS measurements.     

TiO2/SnO2复合空心球在染料敏化太阳能电池中的应用

采用模板辅助法制备了SnO2/TiO2复合空心球,样品直径为1.5~4.0μm,比表面积达到了92.9 m^2·g^-1,复合空心球表现出优越的光散射性能.以这种复合空心球作为染料敏化太阳能电池的光阳极,电池的光电转换效率可达到7.72%,高于SnO2微米球(2.70%)和TiO2微米球(6.26%).此外,以锐钛矿型TiO2纳米晶作为底层,SnO2/TiO2复合空心球作为光散射层制备的双层结构光阳极,电池光电转换效率进一步提升至8.43%.     

Sponge-like TiO2 layers for dye-sensitized solar cells

A titanium oxide layer used in a dye-sensitized solar cell (DSSC) has to meet two opponent properties to enable high conversion efficiency: a large surface area (for high dye loading) and good connection between TiO₂ grains (for efficient extraction of electrons toward the front contact). In order to meet a trade-off between these criteria a preparation method for TiO₂ paste formulation based on Pechini sol–gel method and commercial nanocrystalline TiO₂ powder has been developed. A series of TiO₂ pastes with different molar ratios between titanium isopropoxide, citric acid and ethylene glycol (1:X:4X) in the paste have been examined. The structure and morphology as well as cross-cut tests of deposited and sintered TiO₂ layers have been analyzed. Results reveal that the paste with X = 8 exhibits the best properties, resulting in an overall conversion efficiency of DSSC under standard test conditions (100 mW/cm², 25 °C, AM 1.5G) up to 6.6% for ionic liquid based electrolyte.     

Controllable hydrothermal synthesis of nanocrystal TiO2 particles and their use in dye-sensitized solar cells

A simple method for the controllable hydrothermal synthesis of nanocrystalline anatase TiO2(nc-TiO2) particles involving the selection of suitable organic alkali peptizing agents is reported.A dye-sensitized solar cell(DSSC) with square-like nc-TiO2 particles with side lengths about 8-13 nm-prepared using tetraethylammonium hydroxide(TEAOH)-in the photoelectrode showed higher photovoltaic performance than two other DSSCs with square-like nc-TiO2 particles with side lengths about 7-10 nm-prepared using tetrabutylammonium hydroxide-or elongated nc-TiO2 particles with lengths about 18-35 nm and width about 10 18 nm-prepared using tetramethylammonium hydroxide(TMAOH)-in the photoelectrodes.When a scattering layer prepared from sub-micron size spheres or cone-like nc-TiO2 particles-synthesized using a higher concentration of TMAOH-was added on top of the photoelectrode fabricated from nc-TiO2 synthesized with TEAOH,the energy conversion efficiency of the DSSC was markedly increased from 6.77% to 8.18%.     

Molecular engineering of organic sensitizers containing indole moiety for dye-sensitized solar cells

Three organic dyes, JK-77, JK-78, and JK-79 containing indole unit are designed and synthesized. Nanocrystalline TiO₂ dye-sensitized solar cells were fabricated using these dyes. Under standard global AM 1.5 solar condition, the JK-79 sensitized solar cell gave a short circuit photocurrent density of 13.62 mA cm⁻², open-circuit voltage of 0.705 V, and a fill factor of 0.74, corresponding to an overall conversion efficiency η of 7.18%. We found that the η of JK-79 was higher than those of other two cells due to the higher V_oc. The improved V_oc value is attributed to the suppression of dark current owing to the blocking effect of a long alkyl chain.     

Applicability of silanol to sensitizing dye for dye-sensitized solar cell

Applicability of silanols to dye-sensitized solar cells was investigated for the first time with bis(4-azobenzene)silanediol as a model compound. The silanol dye showed high adsorption ability on the surface of TiO₂ electrode and effective electron transfer from the light-excited dye to the electrode was confirmed, exhibiting the effectiveness of the silanol dyes for the sensitizers.     

In vitro corrosion study of different TiO2 nanotube layers on titanium in solution with serum proteins

Titanium oxide nanotubes prepared by anodization have received considerable attention in the biomaterials domain. The objective of this study was to demonstrate the electrochemical behavior of different diameter TiO(2) nanotube layers on titanium in phosphate buffered saline (PBS) and Dulbecco's minimum essential medium+10% fetal calf serum (D-FCS) using open circuit potentials (OCP), electrical impedance spectroscopy (EIS), and a potentiodynamic polarization test. The results showed that the nanotubes had higher OCP, higher resistance of the inter barrier layer (R(b)), and lower I(pass) in the two test solutions compared to the smooth Ti, especially the 30 nm diameter nanotubes. The corrosion resistance of the nanotubes in D-FCS was higher than in PBS because of protein adsorption from the D-FCS solution as suggested by scanning electron microscope (SEM) images. In addition, protein aggregates of 30 nm diameter nanotubes caused the model of EIS spectra to transform from two-layer to three-layer. The corrosion behavior of the nanotubes for use as a dental implant material is discussed.     

Quasi-solid-state dye-sensitized solar cell based on a polymer gel electrolyte with in situ synthesized ionic conductors

A polymer gel electrolyte with in situ synthesized Acac-Py-I₂ ionic conductors was prepared for fabricating a quasi-solid-state dye-sensitized solar cell (QS-DSSC). The in situ synthesized Acac-Py-I₂ ionic conductors show weaker influence on the liquid electrolyte absorbency of the polymer gel electrolyte than that of Acac-Py-I₂ ionic conductors dissolved in liquid electrolyte. Owing to the higher liquid electrolyte absorbency, the polymer gel electrolyte with in situ synthesized Acac-Py-I₂ ionic conductors shows higher ionic conductivity than that of polymer gel electrolyte with Acac-Py-I₂ ionic conductors absorbed from liquid electrolyte. QS-DSSC containing the polymer gel electrolyte with in situ synthesized Acac-Py-I₂ ionic conductors shows 3.815% energy conversion efficiency, which is 21.6% higher than that of QS-DSSC containing polymer gel electrolyte with Acac-Py-I₂ ionic conductors absorbed from liquid electrolyte.     

Structure of TiO2 in TiO2-SiO2 prepared by a complexing agent-assisted sol-gel procedure

Many types of TiO₂-SiO₂ (Ti:Si=50:50 mol%) were prepared by the sol-gel procedure with and without 2-methyl-2, 4-pentanediol (MPD) as an organic ligand. The effect of MPD on the gel structure and the properties of the TiO₂ crystals were studied by XRD and raman spectroscopy, and the effect of the sol standing time on the properties of the TiO₂ crystals were also studied by XRD spectroscopy. In the gels with MPD, anatase of TiO₂ appeared at approximately 580°C, and the crystal structures were similar despite the difference in the gel preparation procedure. The titania gels with MPD were presumed to be dispersed in the silica gel matrix without any Ti-O-Si bond. In the presence of MPD, the formation of titania gels is controlled and the specified TiO₂ crystal is produced.     

Synthesis of new truxene based organic sensitizers for iodine-free dye-sensitized solar cells

Developing arylamine photosensitizers with high extinction coefficients, proper electronic structures, and steric properties is warranted for the dye-sensitized solar cells (DSCs) employing iodine-free redox shuttles. Two new organic sensitizers (M21 and M22) featuring unsymmetrical truxene-based triarylamine donor have been synthesized and compared to its reference sensitizer M4. The effects of unsymmetrical truxene-based triarylamine donors were investigated by their absorption spectra, electrochemical and photovoltaic properties. The incorporation of strong electron donor unit (i.e., dipropylfluorene and 4-methoxybiphenyl) has resulted in an improved light harvesting capacity, and thus photocurrent as well as efficiency of cells. M22 sensitized DSCs employing the Co(II/III)tris(1,10-phenanthroline)-based redox electrolyte affords a short circuit photocurrent of 13.1 mA cm⁻², an open circuit voltage of 861 mV, and a fill factor of 0.70, corresponding to an overall conversion efficiency of 7.89% under standard AM 1.5 sunlight.     

Synthesis of sensitizers containing donor cascade of triarylamine and dimethylarylamine moieties for dye-sensitized solar cells

Four triarylamine derivatives (XS6-9) containing N,N-dimethylaryl amine units as secondary electron-donating groups are designed and synthesized. These dyes were applied into nanocrystalline TiO₂ dye-sensitized solar cells through standard operations. For a typical device the maximal monochromatic incident photon-to-current conversion efficiency (IPCE) can reach 93%, with a short-circuit photocurrent density (J_sc) 10.8 mA cm⁻², an open-circuit photovoltage (V_oc) 690 mV, and fill factor (FF) 0.61, which corresponds to an overall conversion efficiency of 4.54%.     

5-Phenyl-iminostilbene based organic dyes for efficient dye-sensitized solar cells

Four new 5-phenyl-iminostilbene dyes (ISB-3–6) containing electron-withdrawing benzo-[c][1,2,5]thiadiazole have been designed and synthesized for use as DSSCs. Their absorption properties and electrochemical and photovoltaic performances have been investigated systematically. Among these dyes, DSSCs based on a dye containing benzo-[c][1,2,5]thiadiazole and benzene moieties (ISB-4) showed the best performance: a short-circuit photocurrent density (J_sc) of 13.69 mA cm⁻², an open-circuit photovoltage (V_oc) of 722 mV, and a fill factor (FF) of 0.71, which corresponds to a power conversion efficiency (PCE) of 6.71%, under optimized conditions. Additionally, long-term stability of the ISB-4 based DSSCs with ionic-liquid electrolytes was demonstrated under 1000 h of light soaking, the photovoltaic performance is up to 5.75%. The results suggest that 5-phenyl-iminostilbene containing dyes are promising candidates for application in DSSCs.