Preparation and characterization of a new HPLC C18 reversed phase containing thiocarbamate groups

A HPLC stationary phase that possesses an internal thiocarbamate functional group is described. The new C18-thiocarbamate silane was synthesized by the reaction of a trifunctional alkoxysilane with a mercaptan. The silylant agent was bonded to silica (5 μm) and the new stationary phase was then endcapped. Surface characteristics of the packing before and after chemical modification with HMDS and TMCS were determined by different physico-chemical methods, such as elemental analysis and infrared and solid-state ¹³C and ²⁹Si nuclear magnetic resonance spectroscopies. Chromatographic properties of the C18-thiocarbamate silica were evaluated under reversed phase conditions by separation of four different test mixtures that including compounds from the Engelhardt, Tanaka, and Neue test mixtures. Chromatographic evaluations of the C18-thiocarbamate phase show promising results for the separation of basic analytes.     

Liquid Chromatographic Behavior of Selected Aza-arenes and Potential Metabolites

Abstract

Reversed phase HPLC was applied to analyses of selected aza-arenes and potential metabolites (5,6-benzoquinoline, 5,6-benzoquinoline-N-oxide, and the N-methyliodide salt of 5,6-benzoquinoline). Naphthalene and anthracene were employed as reference materials. Water-methanol and ammonium phosphate-methanol mobile phases were used with several commercial octadecyl reversed phase columns and a column using laboratory synthesized ODS stationary phase. Chromatographic behavior of the hydrocarbon reference compounds were excellent on all packings with either mobile phase. Benzoquinoline and derived materials were more difficult analytical subjects; water-methanol mobile phases proved unsuitable giving very long retention times with unacceptable efficiencies. Ammonium phosphate containing mobile phases were more appropriate for the nitrogen containing materials especially when used with end capped or polymeric end capped stationary phases.     

Effect of mobile phase pH on the retention of nucleotides on different stationary phases for high-performance liquid chromatography

The main aim of the present investigation was to study the retention and separation of eight nucleotides with the use of seven stationary phases in RP HPLC mode. Two octadecyl columns were used; however, aminopropyl, alkylamide, cholesterol, alkyl-phosphate, and phenyl were also studied. Special attention was paid to the mobile phase buffer pH, since it appears that this factor is very influential in the case of chromatographic separation of nucleotides. The retention of nucleotides was greater for mobile phase pH?4.0 in comparison with pH?7.0 (except for octadecyl and phenyl packing). This is a consequence of protonization of polar groups present on the stationary phase surface. It was proved that aminopropyl, alkyl phosphate, alkylamide packing materials are not suitable for the resolution of nucleotides. On the other hand, cholesterol and phenyl stationary phases are alternatives for conventional octadecyl phases. Application of cholesterol packing allows separation of small, polar nucleotides, which is impossible to achieve in the case of octadecyl phase. Moreover, a phenyl support allows separation of nucleotides in a shorter time in comparison with octadecyl packing.     

正反相模式下键合纤维素手性固定相对手性化合物的拆分

在自行合成的键合型纤维素-(3,5-二甲基苯基氨基甲酸酯)(CDMPC-CSP)手性固定相上,在正相模式下对苯偶姻和甲霜灵外消旋体进行了拆分,考察了流动相中醇以及温度在手性识别中对手性分离的影响。同时考察了反相模式下外消旋体的拆分。     

The effect of stationary phase on lipophilicity determination of beta-blockers using reverse-phase chromatographic systems

Evaluation of lipophilicity parameters for basic compounds using different chromatographic stationary phases is presented. An HPLC method for determination of lipophilic molecule-stationary phase interactions was based on gradient analysis. Differences in correlation between the lipophilicity of compounds and experimental chromatographic results obtained in pseudo-membrane systems showed a strong influence of stationary phase structure and physico-chemical properties. beta-Blocker drugs with varying lipophilicity and bio-activity were chosen as test compounds. The stationary phases used for the study were monolithic rod-structure C18 and silica gel octadecyl phase SG-C18 as reference material. The second group was silica gel-based polar-embedded alkylamide and cholesterolic phases. The mobile phase was composed of acetonitrile or methanol with ammonium acetate, and a linear gradient of methanol and acetonitrile in mobile phase was performed. A linear correlation of plots of log k(g) = f(log P) was observed, especially for polar-embedded phases, and this allowed log P(HPLC) to be calculated. The behavior of stationary phases in methanol and acetonitrile buffer showed differences between obtained log P(HPLC) values.     

Epoxide‐derived mixed‐mode chromatographic stationary phases for separation of active substances in fixed‐dose combination drugs

A method for the preparation of novel mixed‐mode reversed‐phase/strong cation exchange stationary phase for the separation of fixed‐dose combination drugs has been developed. An epoxysilane bonded silica prepared by vapor phase deposition was used as a starting material to produce diol, octadecyl, sulfonate, and mixed octadecyl/sulfonate groups bonded silica phases. The chemical structure and surface coverage of the functional groups on these synthesized phases were confirmed by fourier‐transform infrared and solid‐state ¹³C NMR spectroscopy and elemental analysis. Alkylbenzene homologs, basic drugs, nucleobases and alkylaniline homologs were used as probes to demonstrate the reversed‐phase, ion exchange, hydrophilic interaction and mixed‐mode retention behaviors of these stationary phases. The octadecyl/sulfonate bonded silica exhibits pronounced mixed‐mode retention behavior and superior retentivity and selectivity for alkylaniline homologs. The mixed‐mode retention is affected by either ionic or solvent strength in the mobile phase, permiting optimization of a separation by fine tuning these parameters. The mixed‐mode stationary phase was applied to separate two fixed‐dose combination drugs: compound reserpine tablets and compound methoxyphenamine capsules. The results show that simultaneous separation of multiple substances in the compound dosage can be achieved on the mixed‐mode phase, which makes multi‐cycles of analysis for multiple components obsolete.     

Temperature-dependent separation of bryostatin 18 and 10 by high performance liquid chromatography

Summary The temperature-dependent separation of bryostatins by HPLC was examined on an octadecyl bonded stationary phase, using column temperatures between 0 and 40°C and mobile phase temperatures from 0 to 25°C. The retention time and resolution of bryostatins changed drastically and separation improved with decreasing temperature. A column temperature of less than 5°C and a mobile phase temperature of less than 15°C is recommended for a good resolution of bryostatins for routine work.     

Selectivity comparisons of monolithic silica capillary columns modified with poly(octadecyl methacrylate) and octadecyl moieties for halogenated compounds in reversed-phase liquid chromatography

Stationary phase selectivities for halogenated compounds in reversed-phase HPLC were compared using C18 monolithic silica capillary columns modified with poly(octadecyl methacrylate) (ODM) and octadecyl moieties (ODS). The preferential retention of halogenated benzenes on ODM was observed in methanol/water and acetonitrile/water mobile phases. In selectivity comparison of selected analytes on ODM and ODS, greater selectivities for halogenated compounds were obtained with respect to alkylbenzenes on an ODM column, while similar selectivities were observed with a homologous series of alkylbenzenes on ODM and ODS columns. These data can be explained by greater dispersive interactions by more densely packed octadecyl groups on the ODM polymer coated column together with the contribution of carbonyl groups in ODM side chains. For the positional isomeric separation of dihalogenated benzenes (ortho-, meta-, para-), the ODM column also provided better separation of these isomers for the adjacently eluted isomers that cannot be completely separated on an ODS column in the same mobile phase. These results imply that the ODM column can be used as a better alternative to the ODS column for the separation of other halogenated compounds.     

Synthesis of a stationary phase based on silica modified with branched octadecyl groups by Michael addition and photoinduced thiol–yne click chemistry for the separation of basic compounds

A novel silica‐based stationary phase with branched octadecyl groups was prepared by the sequential employment of the Michael addition reaction and photoinduced thiol–yne click chemistry with 3‐aminopropyl‐functionalized silica microspheres as the initial material. The resulting stationary phase denoted as SiO₂‐N(C18)₄ was characterized by elemental analysis, FTIR spectroscopy and Raman spectroscopy, demonstrating the existence of branched octadecyl groups in silica microspheres. The separations of benzene homologous compounds, acid compounds and amine analogues were conducted, demonstrating mixed‐mode separation mechanism on SiO₂‐N(C18)₄. Baseline separation of basic drugs mixture was acquired with the mobile phase of acetonitrile/H₂O (5%, v/v). SiO₂‐N(C18)₄ was further applied to separate Corydalis yanhusuo Wang water extracts, and more baseline separation peaks were obtained for SiO₂‐N(C18)₄ than those on Atlantis dC18 column. It can be expected that this new silica‐based stationary phase will exhibit great potential in the analysis of basic compounds.     

Ultra‐high performance separation of basic compounds on reversed‐phase columns packed with fully/superficially porous silica and hybrid particles by using ultraviolet transparent hydrophobic cationic additives

The use of the tetrabutylammonium additive was investigated in the ultra‐high performance reversed‐phase liquid chromatographic elution of basic molecules of pharmaceutical interest. When added to the mobile phase at low pH, the hydrophobic tetrabutylammonium cation interacts with the octadecyl chains and with the residual silanols, thus imparting a positive charge to the stationary phase, modulating retention and improving peak shape of protonated basic solutes. Two sources of additive were tested: a mixture of tetrabutylammonium hydroxide/trifluoroacetic acid and tetrabutylammonium hydrogen sulfate. Retention and peak shape of 11 basic pharmaceutical compounds were evaluated on commercially available ultra‐fast columns packed with octadecyl stationary phases (Ascentis Express C18 2.0 µm, Acquity BEH C18 1.7 µm, Titan C18 1.9 µm). All columns benefit from the use of additive, especially tetrabutylammonium hydrogen sulfate, providing very symmetric peaks with reasonable retention times. Focusing on the probe compounds amitriptyline and sertraline, efficiency and asymmetry values were investigated at increasing retention factor. The trend is very different to that obtained in reversed‐phase conditions and the effect lies in the complex molecular interaction mechanisms based on hydrophobic and ion exchange interactions as well as electrostatic repulsion.     

Facile separation of enantiomers,geometrical isomers,and routine compounds on stable cyclodextrin LC bonded phases

The effectiveness of employing stationary phases composed of chemically bonded cyclodextrin molecules in the high performance liquid chromatographic separation of a variety of different types of compounds is summarized. Over one hundred compounds, including optical, geometrical, and structural isomers, diastereomers, and epimers were successfully separated from each other via use of beta- or gamma-cyclodextrin bonded phases and aqueous methanolic mobile phases. The mechanism of separation is based upon inclusion complex formation between the compounds being separated and the cyclodextrin molecules bonded to the stationary phase. The effects of temperature, mobile phase composition and flow rate upon the chromatographic selectivity and resolution are described. The results indicate that the cyclodextrin columns may be more versatile, flexible, and effective compared to the conventional normal or reversed phase columns.     

Isocratic mixed mode liquid chromatographic separation of phospholipids with octadecylsilane-silica stationary phases

Molecular species of phosphatidylcholine, phosphatidylethanolamine and phosphatadic acid were resolved by isocratic reversed phase high performance liquid chromatography (HPLC) using mobile phases of methanol-isopropanol containing para-toluenesulfonic acid (p-tsa). Separation by both non-polar fatty acid chain length and by polar head group functionality was achieved concurrently upon a commercially available octadecylsilane (C18) column endcapped with trimethylsilane (C1) groups. Using a mobile phase of 97.5:2.5 methanol:isopropanol with 7OmMpara-toluenesulfonic acid (p-tsa) at a pH of approximately 1, twelve phospholipid species comprised of four tail group classes (dilauroyl-,dimyristoyl-, dipamitoyl- and distearoyl-) and three head group speciations (phosphatidylcholine, phosphatidylethanolamine and phosphatadic acid) were separated. The column was then exposed to the acidic mobile phase for 48 hours continuously during which the bound phase underwent severe acid-induced hydrolysis, after which the separation of the twelve analytes resulted in the separation of the phospholipid species by non-polar tail group alone. The experimental results are discussed in terms of potential separation mechanisms including dependency of the separation on adsorption of the counter ion into the stationary phase, residual acidic silanol group interactions, and potential interactions of the surface active phospholipids with C1 groups.     

Retention of C60 and C70 fullerenes on reversed-phase high-performance liquid chromatographic stationary phases.

The separation of C60 and C70 fullerenes on four different polysiloxane stationary phases was examined. It was determined that polar solvents can be used as mobile phases effectively for the separation of fullerene molecules. Unlike previously published work, a polymeric octadecyl siloxane (ODS) stationary phase provided higher separation factors for C70/C60 than did monomeric ODS stationary phases or phenyl substituted stationary phases. For example, for a methanol-diethyl ether (50:50, v/v) mobile phase and C60, k' approximately 5.0 separation factors, alpha = 3.3, were achieved with polymeric ODS compared to alpha = 2.2, with a monomeric ODS stationary phase. A linear solvation energy relationship (LSER) was used to model the importance of solvent interactions and stationary phase interaction to solute retention.     

Preparation,characterization and application of a new 25,27‐bis‐[2‐(5‐methylthiadiazole)thioethoxyl]‐26,28‐dihydroxy‐para‐tert‐butyl calix[4]arene stationary phase for HPLC

A new para‐tert‐butylcalix[4]arene column containing thiadiazole functional groups was prepared and used for the separation of polycyclic aromatic hydrocarbons, phenolic compounds, aromatic amines, benzoic acid and its derivatives by high‐performance liquid chromatography (HPLC). The effect of organic modifier content in the mobile phase on retention and selectivity of these compounds were investigated. The results indicate that the stationary phase behaves like reversed‐phase packing. However, hydrogen bonding, π–π and inclusion interactions seem to be involved in the separation process. The column has been successfully employed for the analysis of clenbuterol in pork and pig casing; the limit of detection and the limit of quantitation for this method by HPLC‐UV detection was 0.03 and 0.097 μg/mL, respectively; the method is demonstrated to be suitable and a competitive alternative analytical method for the determination of clenbuterol.     

Phase Systems and Post-Column Dithizone Reaction Detection for the Analysis of Organo-Mercurials by HPLC

Abstract

The suitability of HPLC (normal and reversed phase adsorption) with UV or post-column reaction detection for the analysis of organomercurials was investigated systematically. The separation of organomercurials is best carried out on a reversed phase system with a C-8 bonded phase material as the stationary phase and acetonitrile-aqueous sodium bromide mixtures as the mobile phase.

The precision and detection limit of the method and the efficiency of the extraction procedure were established. For the alkylmercury compounds the lowest limit of detection (80ppb) was obtained with the dithizone reaction detection and for the phenylmercury compounds with UV detection (60ppb). A chromatogram of a spiked fish (2ppmHg) and a river water sample (50ppbHg) is shown.     

Selectivity of stationary phases in reversed-phase liquid chromatography based on the dispersion interactions

Selectivity of 15 stationary phases was examined, either commercially available or synthesized in-house. The highest selectivity factors were observed for solute molecules having different polarizability on the 3-(pentabromobenzyloxy)propyl phase (PBB), followed by the 2-(1-pyrenyl)ethyl phase (PYE). Selectivity of fluoroalkane 4,4-di(trifluoromethyl)-5,5,6,6,7,7,7-heptafluoroheptyl (F13C9) phase is lowest among all phases for all compounds except for fluorinated ones. Aliphatic octyl (C8) and octadecyl (C18) phases demonstrated considerable selectivity, especially for alkyl compounds. While PBB showed much greater preference for compounds with high polarizability containing heavy atoms than C18 phase, F13C9 phase showed the exactly opposite tendency. These three stationary phases can offer widely different selectivity that can be utilized when one stationary phase fails to provide separation for certain mixtures. The retention and selectivity of solutes in reversed-phase liquid chromatography is related to the mobile phase and the stationary phase effects. The mobile phase effect, related to the hydrophobic cavity formation around non-polar solutes, is assumed to have a dominant effect on retention upon aliphatic stationary phases such as C8, C18. In a common mobile phase significant stationary phase effect can be attributed to dispersion interaction. Highly dispersive stationary phases such as PBB and PYE retain solutes to a significant extent by (attractive) dispersion interaction with the stationary phase ligands, especially for highly dispersive solutes containing aromatic functionality and/or heavy atoms. The contribution of dispersion interaction is shown to be much less on C18 or C8 phases and was even disadvantageous on F13C9 phase. Structural properties of stationary phases are analyzed and confirmed by means of quantitative structure-chromatographic retention (QSRR) study.     

Comparison of common mobile‐phase volume markers with polar‐group‐containing reversed‐phase stationary phases

A systematic study of the behavior of several common mobile‐phase volume markers using traditional and polar‐group‐containing reversed‐phase stationary phases is presented. Examined mobile‐phase volume markers include two neutral molecules, uracil and thiourea, concentrated (0.10 M) and dilute (0.0001 M) KNO₃, and D₂O. Mobile‐phase volumes are examined over the entire reversed‐phase mobile‐phase range of 100% water to 100% methanol or acetonitrile. The behavior of these mobile‐phase volume markers is compared with a maximum theoretical value (i.e. the void volume), as determined by pycnometry. The data suggest that: (i) uracil begins to fail as a mobile‐phase volume marker in mobile phases below about 40% strong solvent for polar group containing phases; (ii) in nearly all cases, the mobile‐phase volume measured dynamically is smaller than the pycnometric void volume; (iii) a significant dependence of measured mobile‐phase volume on salt concentration is seen on the polar endcapped phase, which is not observed on the traditional and embedded polar group phase; and (iv) D₂O does not work well as a mobile‐phase volume marker with polar‐group‐containing phases, possibly due to interaction with the stationary phase polar group.     

Comparison of retention on traditional alkyl, polar endcapped, and polar embedded group stationary phases

The development of new RP stationary phases containing polar groups has provided the chromatographer with a variety of stationary phase choices with differing selectivities. Polar endcapped and polar embedded group stationary phases have found use in solving a wide variety of separation problems, especially for the efficient separation of organic bases as well as separations necessitating the use of highly aqueous mobile phases. In this report, the retention thermodynamics of small, nonpolar solutes on traditional alkyl, polar endcapped, and polar embedded group stationary phases are compared. It is found that the nonpolar (methylene) transfer enthalpy is less favorable when polar embedded group phases are used, when compared to traditional or polar endcapped phases. In contrast, the transfer enthalpy of a phenyl group is found to be more favorable when a polar endcapped phase is used. In addition, the retention characteristics of these phases are compared using a set of solutes with differing solvatochromic parameters. Hydrogen-bond acids appear to have enhanced retention on polar embedded group phases, while hydrogen-bond bases have enhanced retention on polar endcapped phases.     

A novel silica-based column packing for reversed-phase HPLC of basic compounds

Summary A novel bonded phase for reversed-phase HPLC was synthesized in two steps. Octylamine was first reacted with β-(3,4-epoxycyclohexyl)ethyltrimethoxysilane (β-ECTS) and then the intermediate product was coupled onto porous silica. The prepared packing was characterized by elemental analysis, solid-state¹³C NMR and Fourier transform infrared (FT-IR). Chromatographic evaluations were carried out by using a mixture of organic compounds including acidic, basic and neutral analytes and methanol-water as binary mobile phase. The results showed that the stationary phase has excellent chromatographic properties and is resistant to hydrolysis between pH=2≈8. It can be used efficiently for the separation of basic compounds.     

Linear Solvation Energy Relationships in the Determination of Specificity and Selectivity of Stationary Phases

The retention of fifty structurally different compounds has been studied using linear solvation energy relationships. Investigations were performed with the use of six various stationary phases with two mobile phases (50/50 % v/v methanol/water and 50/50 % v/v acetonitrile/water). Packing materials were home-made and functionalized with octadecyl, alkylamide, cholesterol, alkyl-phosphate and phenyl molecules. This is the first attempt to compare all of these stationary phases synthesized on the same silica gel batch. Therefore, all of them may be compared in more complex and believable way, than it was performed earlier in former investigations. The phase properties (based on Abraham model) were used to the classification of stationary phases according to their interaction properties. The hydrophilic system properties s, a, b indicate stronger interactions between solute and mobile phase for most of the columns. Both e and v cause greater retention as a consequence of preferable interactions with stationary phase by electron pairs and cavity formation as well as hydrophobic bonds. However, alkyl-phosphate phase has different retention properties, as it was expressed by positive sign of s coefficient. It may be concluded that most important parameters influencing the retention of compounds are volume and hydrogen bond acceptor basicity. The LSER coefficients showed also the dependency on the type of organic modifier used as a mobile phase component.