<Emphasis Type="SmallCaps">d</Emphasis>(−)-Lactic Acid Production by <Emphasis Type="Italic">Leuconostoc mesenteroides</Emphasis> B512 Using Different Carbon and Nitrogen Sources

Sugar concentration from sugarcane juice and yeast autolysate increased lactic acid production more than the other agro-industrial substrates tested. The concentrations of these two components were further optimized using the Plackett–Burman design and response surface method. A second-order polynomial regression model estimated that a maximal lactic acid production of 66.11 g/L would be obtained when the optimal values of sugar and yeast autolysate were 116.9 and 44.25 g/L, respectively. To validate the optimization of the medium composition, studies were carried out using the optimized conditions to confirm the result of the response surface analysis. After 48 h, lactic acid production using the shake-flask method was at 60.2 g/L.     

Dirhenium Compounds Supported by <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis><Emphasis Type="BoldItalic">′</Emphasis>-Dimethylbenzamidinate: Formation of Linear Polymers via Axial Ligation

The reaction between Re₂(DMBA)₄Cl₂ and NaN(CN)₂ resulted in Re₂(DMBA)₄(N(CN)₂)₂ (1a), where DMBA is N,N′-dimethylbenzamidinate. Molecular compounds Re₂(DMBA)₄(ReO₄)₂ (1b) and Re₂(DMBA)₄(OP(O)(OH)Ph)₂ (1c) were obtained through the reactions between Re₂(DMBA)₄(NO₃)₂ and the respective monoanion. The dirhenium(III) coordination polymers [Re₂(DMBA)₄(μ-O,O′-WO₄)·2H₂O]_∞ (2a), [Re₂(DMBA)₄(μ-O,O′-MoO₄)·2H₂O]_∞ (2b), and [Re₂(DMBA)₄(μ-O,O′-1,4-(O₂C)₂C₆H₄)·2H₂O]_∞ (2c) were similarly prepared through slow diffusion of Re₂(DMBA)₄(NO₃)₂ in acetonitrile into aqueous solution containing the respective dianion. All new compounds were characterized with single crystal X-ray diffraction, which revealed the retention of the essential structural features of Re₂(DMBA)₄ unit upon the formation of coordination polymers.     

Computer models of eutectic-type <Emphasis Type="Italic">T</Emphasis>–<Emphasis Type="Italic">x</Emphasis>–<Emphasis Type="Italic">y</Emphasis> diagrams with allotropy

Using the eutectic-type T–x–y diagram as an example, it can be represented the analysis of its geometrical construction dependence on the temperature of a component two polymorphous modifications which participate in mono- and invariant metatectic and invariant eutectic (eutectoid) transformations above or below (and within) binary eutectics temperature intervals and below a ternary eutectic temperature. Computer models for considered phase diagrams have been designed. Such models help to solve applied tasks like visualization, isopleths and isothermal sections decoding, mass balances calculation and evaluation of phase and conglomerate concentration in microstructure.     

Phase Diagrams of the <Emphasis Type="Italic">n</Emphasis>-Decane–<Emphasis Type="Italic">n</Emphasis>-Hexadecane–Cyclododecane, <Emphasis Type="Italic">n</Emphasis>-Decane–Cyclododecane,and <Emphasis Type="Italic">n</Emphasis>-Hexadecane–Cyclododecane Systems

The n-decane–n-hexadecane–cyclododecane, n-decane–cyclododecane, and n-hexadecane–cyclododecane systems are studied by means of low-temperature differential thermal analysis using a differential scanning heat flow calorimeter. It is noted that all studied systems belong to the eutectic type. It is concluded that in the n-decane–n-hexadecane–cyclododecane system, the eutectic composition contains 85.0 wt % n-С₁₀Н₂₂, 4.0 wt % n-С₁₆Н₃₄, and 11.0 wt % С₁₂Н₂₄. It has a melting point of ?35.0°C.     

<Emphasis Type="Italic">N</Emphasis>′-tetrazolylmethoxyl derivatives of <Emphasis Type="Italic">N</Emphasis>-methyldiazene <Emphasis Type="Italic">N</Emphasis>-oxides

A preparation method was developed for previously unknown tetrazole derivatives containing in the 1, 2, and/or 5 positions of the tetrazole ring N-methyldiazene-N-oxide-N′-oxymethyl groups.     

1,3-Diamino-2-Hydroxypropane-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>′,<Emphasis Type="Italic">N</Emphasis>′-Tetraacetic Acid: Crystal and Molecular Structures

The synthesis, IR spectroscopic study, and X-ray diffraction analysis (CIF file CCDC no. 1574078) are carried out for 1,3-diamino-2-hydroxypropane-N,N,N′,N′-tetraacetic acid (I). The structural units of a crystal of compound I are (H_4.5HPdta)^0.5– anions, (H_5.5HPdta)^0.5+ cations, and molecules of water of crystallization joined by a branched network of hydrogen bonds: strong intermolecular O–H…O and intramolecular N–H…O bonds.     

Study of<Emphasis Type="Italic"> β</Emphasis>–<Emphasis Type="Italic">α</Emphasis> recrystallization of the polypropylene

The crystalline modifications and of polypropylene (PP) were studied by using polarized light microscopy (PLM), wide-angle X-ray diffraction (WAXD), and differential scanning calorimetry (DSC). Typically crystals surrounded by spherulites were observed at low temperature. With increasing temperature the crystals melted and a new crystal appeared. More interestingly, the melting temperature of the new crystal was about 5 ° higher than that of spherulites originally present in the sample formed isothermally. It was assumed that this new crystal was the recrystalline crystal. This assumption was supported by the DSC results. Furthermore, the crystallization kinetics of the PP used was studied on the basis of the traditional Avrami analysis. As a result, the Avrami exponents of crystallization temperature from 120 to 130 °C ranged between 4.21 and 3.60, indicating that the crystallization mechanism of PP order melt was spherulitic growth and random nucleation.     

Synthesis of <Emphasis Type="Italic">α</Emphasis>-chloropyridine derivatives of <Emphasis Type="Italic">γ</Emphasis>-aminobutyric acid

The sodium salt of N-(6-chloronicotinoyl)-γ-aminobutyric acid, a structural analog of the known nootropic and vasidilating drug picamilon, was synthesized via Schotten–Baumann acylation of γ-aminobutyric acid with 6-chloronicotinoyl chloride and subsequent neutralization of the N-(6-chloronicotinoyl)-γ-aminobutyric acid that was obtained in >60% yield.     

Synthesis of 20<Emphasis Type="Italic">S</Emphasis>-protopanaxadiol <Emphasis Type="Italic">β</Emphasis>-D-galactopyranosides

20S-Protopanaxadiol (3β,12β,20S-trihydroxydammar-24-ene) 3-, 12-, and 20-O-β-D-galactopyranosides were synthesized for the first time. Condensation of 12β-acetoxy-3β,20S-dihydroxydammar-24-ene (1) and 2,3,4,6-tetra-O-acetyl-α-D-galactopyranosylbromide (α-acetobromogalactose) (2) under Koenigs–Knorr conditions with subsequent removal of the protecting groups resulted in regio- and stereoselective formation of 20S-protopanaxadiol 3-O-β-D-galactopyranoside, an analog of the natural ginsenoside Rh₂. Glycosylation of 12β,20S-dihydroxydammar-24-en-3-one (5) by 2 with subsequent treatment of the reaction products with NaBH₄ in isopropanol and deacetylation with NaOMe gave 20S-protopanaxadiol 12- and 20-O-β-Dgalactopyranosides.     

10<Emphasis Type="Italic">α</Emphasis>-Hydroxy-<Emphasis Type="Italic">β</Emphasis>-isomorphine,a by-product of the synthesis of 10<Emphasis Type="Italic">α</Emphasis>-hydroxymorphine

Abstract  A new compound was isolated from the reaction mixture after O-demethylation of 6-O-acetyl-10α-acetoxycodeine with boron tribromide. The structure of this compound, 10α-hydroxy-β-isomorphine, was elucidated by spectral data, and its spatial arrangement was deduced from an NOE experiment. Capillary zone electrophoresis was used for separation of morphine and its 10-hydroxy analogues. Graphical abstract        

Directed Aminomethylation of Pyrrole,Indole, and Carbazole with <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N′</Emphasis>,<Emphasis Type="Italic">N′</Emphasis>-Tetramethylmethanediamine

Catalytic aminomethylation of pyrrole and indole with N,N,N′,N′-tetramethylmethanediamine in the presence of 5 mol % of ZrOCl₂·8H₂O proceeds selectively at the positions 2, 5 of pyrrole and 1, 3 of indole. Carbazole under the same conditions affords 3-formyl-9-aminomethyl derivative. The reaction in the presence of 5 mol % of K₂CO₃ occurs as monoaminomethylation: for pyrrole at the position 2, for indole at the position 3, and for carbazole at the nitrogen atom of the substrate. Water-soluble 1,1′-(1H-pyrrole-2,5-diyl)bis(N,N-dimethylmethanamine) exhibits a fungistatic activity with respect to phytopathogenic fungi Rhizoctonia solani.     

<Emphasis Type="Italic">β</Emphasis>-Chloro-<Emphasis Type="Italic">α</Emphasis>,<Emphasis Type="Italic">β</Emphasis>-unsaturated carbonyls as convenient precursors of highly substituted benzenes

The Diels–Alder reactions of three β-chloro-α,β-unsaturated carbonyl compounds 1–3 with different dienes were carried out to afford highly functionalized cyclohexenes 4–9, bearing quaternary centers, in good yields. These cycloadducts (CAs) undergo dehydrochlorination with subsequent aromatization in the presence of 1,8-diazabicyclo[5.4.0]undec-7-ene DBU to produce new substituted benzenes 11–14. Compound 10 is the product of lactonization and removal of an HCl molecule from compound 7. All products were characterized by NMR, IR, elementary analysis and some of them by MS. Structure assignments of isomers were carried out on the basis of NMR chemical shifts and coupling constants using 1D, 2D and heteronOe NMR techniques.     

An efficient synthesis of <Emphasis Type="Italic">β</Emphasis>-methoxycarbonyl-<Emphasis Type="Italic">γ</Emphasis>-butyrolactones

β-Methoxycarbonyl-γ-butyrolactones bearing a γ-aromatic substituent were prepared via copper-catalyzed reductive aldol addition/lactonization domino reactions of ketones with α,β-unsaturated dicarboxylate esters and a silane under ambient temperature. The reaction has advantage of using readily available reagents, mild conditions and high efficiency.     

Optimization of <Emphasis Type="Italic">α</Emphasis>-Terpineol Production by the Biotransformation of <Emphasis Type="Italic">R</Emphasis>-(+)-Limonene and (−)-β-Pinene

The main objective of this work is to present the optimization of the biotransformation of R-(+)-limonene and (−)-β-pinene aiming at the production of α-terpineol by strains of fungal and yeasts previously isolated by our research group using the methodology of experimental design. New optimized experimental data on α-terpineol production by the biotransformation of R-(+)-limonene and (−)-β-pinene using newly isolated microorganisms are reported in this work. Conversion of about 1,700 mg/L was achieved when R-(+)-limonene was used as substrate and the newly isolated strain 05.01.35 as microorganism at the central point of the experimental design, corresponding to a substrate concentration of 1.75%, mass of inoculum of 2 g, and substrate to ethanol volume ratio of 1:1. The same experimental condition led to higher conversions when (−)-β-pinene was used as substrates and the strains coded as 04.05.08 and 01.04.03 as microorganism. Here, conversions of about 770 mg/L were achieved.     

Fast evaluation of molecular auxiliary functions <Emphasis Type="Italic">A</Emphasis><Subscript>α</Subscript> and <Emphasis Type="Italic">B</Emphasis><Subscript><Emphasis Type="Italic">n</Emphasis></Subscript> by analytical relations

Analytical relations through the initial values are derived for the molecular auxiliary functions A _α (x) and B _n (x), where α =n+ɛ, 0⩽ ɛ < 1 and n=0,1,2,.... These relations are useful in the fast calculation of multicenter molecular integrals over integer and noninteger n Slater type orbitals. It is shown that the formulas obtained are numerically stable for all values of n,ɛ and x.PACS No: 31.15.+q, 31.20.EjAMS subject classification: 81-V55, 81-V45     

Thermophysical properties of <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimеthylacetamide mixtures with <Emphasis Type="Italic">n</Emphasis>-butanol

The refraction, dielectric, viscosity, density, data of the binary mixtures of N,N-dimethylacetamide (DMA) with n-butanol at 308.15 and 313.15 K. The measured parameters used to obtain derived properties like Bruggeman factor, molar refraction and excess static dielectric constant, excess inverse relaxation time, excess molar volume and excess viscosity, excess molar refraction. The variation in magnitude with composition and temperature of these quantities has been used to discuss the type, strength and nature of binary interactions. Results confirm that there are strong hydrogen-bond interactions between unlike molecules of DMA+ n-butanol mixtures and that 1: 1 complexes are formed and strength of intermolecular interaction increases with temperature.     

Planar Four-Coordinate Carbon in Star-Like Perlithioannulenes C<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript>Li<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript> (<Emphasis Type="Italic">n</Emphasis> = 3–6)

The structure and stability of perlithioannulenes C _n Li _n (n = 3–6) were examined ab initio [MP2(full)/6-311+G**] and in terms of the density functional theory (B3LYP/6-311+G**). The systems with n = 3, 5, and 6 may be stabilized as planar star-like structures with bridging lithium atoms and hypercoordinate carbon atoms. Star-like structures are the most stable isomers of odd-numbered annulenes (n = 3, 5), while the most stable isomers of even-numbered annulenes (n = 4, 6) have less symmetric nonplanar structures.