Field enhanced Li ion conduction in nanoferroelectric modified polymer electrolyte systems

Nanocomposite polymer electrolyte (NCPE) films based on polyethylene oxide (PEO) complexed with lithium perchlorate (LiClO₄) and nanosized ferroelectric ceramic fillers such as BaTiO₃, SrTiO3 have been prepared using solution cast technique. The films showed very good mechanical stability when exposed to ambient atmospheres for prolonged periods. Lithium ion transport studies revealed that the conductivity is predominantly ionic. The effect of electric field on ionic conductivity of NCPE films was investigated. One order enhancement in conductivity due to the field was observed at 323 K. NCPE films exhibited conductivity of 3.46?×?10^?5 Scm^?1 at 323 K. NCPE films were characterized using differential scanning calorimetry (DSC) and X-ray diffraction (XRD) technique. The DSC and XRD studies revealed reduced crystallinity which confirmed the higher amorphous phase and hence the improved ionic conductivity.     

Preparation and characterization of solid polymer electrolytes based on PHEMO and PVDF-HFP

Polymer electrolyte membranes consisting of a novel hyperbranched polyether PHEMO (poly(3-{2-[2-(2-hydroxyethoxy) ethoxy] ethoxy}methyl-3′-methyloxetane)), PVDF-HFP (poly(vinylidene fluoride-hexafluoropropylene)) and LiTFSI have been prepared by solution casting technique. X-ray diffraction of the PHEMO/PVDF-HFP polymer matrix and pure PVDF-HFP revealed the difference in crystallinity between them. The effect of different amounts of PVDF-HFP and lithium salts on the conductivity of the polymer electrolytes was studied. The ionic conductivity of the prepared polymer electrolytes can reach 1.64 × 10^? 4 S·cm^? 1 at 30 °C and 1.75 × 10^? 3 S·cm^? 1 at 80 °C. Thermogravimetric analysis informed that the PHEMO/PVDF-HFP matrix exhibited good thermal stability with a decomposition temperature higher than 400 °C. The electrochemical experiments showed that the electrochemical window of the polymer electrolyte was around 4.2 V vs. Li⁺/Li. The PHEMO/PVDF-HFP polymer electrolyte, which has good electrochemical stability and thermal stability, could be a promising solid polymer electrolyte for polymer lithium ion batteries.     

Polymer electrolytes based on copolymer of poly(ethylene glycol) dimethacrylate and imidazolium ionic liquid

Polymer electrolytes based on the copolymer of N-vinylimidazolium tetrafluoroborate (VyImBF₄) and poly(ethylene glycol) dimethacrylate (PEGDMA) have been prepared. Ethylene carbonate (EC) and LiClO₄ are added to form gel polymer electrolytes. The chemical structure of the samples and the interactions between the various constituents are studied by FT-IR. TGA results show that these polymer electrolytes have acceptable thermal stability, are stable up to 155 °C. Measurements of conductivity are carried out as a function of temperature, VyImBF₄ content in poly(VyImBF₄-co-PEGDMA), and the concentration of EC and LiClO₄. The conductivity increases with PEGDMA and EC content. The highest conductivity is obtained with a value of 2.90 × 10^? 6 S cm^? 1 at room temperature for VP1/EC(25 wt.%)–LiClO₄ system, corresponding to the LiClO₄ concentration of 0.70 mol kg^? 1 polymer.     

High ionic conductive behavior of cyanoethylated polyvinylalcohol- and polyacrylonitrile-based electrolytes

New type polymer electrolyte films based on poly(acrylonitrile), (PAN), and cyanoethylated poly(vinyl alcohol), (CN-PVA), were prepared and their conducting behaviors were investigated. CN-PVA was prepared from poly(vinyl alcohol), (PVA) and acrylonitrile in the presence of sodium hydroxide and quaternary ammonium halide as a phase transfer catalyst. Free standing PAN- and CN-PVA-based electrolyte films were prepared by casting the propylene carbonate (PC) solution containing PAN, CN-PVA and LiClO₄ and removing some amount of PC. Ionic conductivity of the electrolyte film, (PAN)10(CN-PVA) 10(LiClO₄)8(PC)4 composite film was 14.6 mS cm^− 1 at 30 °C and 22.4 mS cm^− 1 at 60 °C. FTIR results for the electrolyte films suggest that the nitrile groups in the CN-PVA matrix mainly interact with the lithium ions in the films and enhance dissolution of the lithium salt in the electrolyte films.     

Preparation and characterization of PVAc–PMMA-based solid polymer blend electrolytes

In the present work, a novel blend polymer electrolyte membrane using poly(vinyl acetate) (PVAc), poly(methyl methacrylate) (PMMA), and lithium per chlorate (LiClO₄) in different compositions has been prepared by the solution-casting technique. Their chemical, structural characters, thermal behavior, surface morphology, and ionic conductivity were studied using Fourier transform infrared spectroscopy, X-ray diffraction, thermogravimetric/differential thermal analyzer, scanning electron microscopy, and AC impedance analyzer, respectively. A maximum ionic conductivity value of 1.67 × 10⁻⁴ S/cm at 303 K is obtained for PVAc–PMMA–LiClO₄ complexes in the ratio of 25 × 75, keeping LiClO₄ constant as 10 wt.% among all the compositions studied.     

Structural and ionic conductivity studies on P(ECH-EO):γ-BL:LiClO<Subscript>4</Subscript> plasticized polymer electrolyte

The plasticized polymer electrolyte consisting of poly(epichlorohydrin-ethyleneoxide) [P(ECH-EO)], lithium perchlorate (LiClO₄) and γ-butyrolactone (γ-BL) have been prepared by simple solution casting technique. The polymer–salt–plasticizer complex has been confirmed by XRD analysis. The ionic conductivity studies have been carried out using AC impedance technique. The effect of plasticizer (γ-BL) on ionic conductivity has been discussed with respect to different temperatures. The maximum value of ionic conductivity is found to be 1.3 × 10⁻⁴ Scm⁻¹ for 70P(ECH-EO):15γ-BL:15LiClO₄ at 303 K. The temperature dependence of the plasticized polymer electrolyte follows the Vogel–Tamman–Fulcher formalism. The activation energy is found to decrease with the increase in plasticizer.     

Polymer electrolytes based on poly(vinylidene fluoride-co-hexafluoropropylene) with crosslinked poly(ethylene glycol) for lithium batteries

The combination of a poly(ethylene glycol) (PEG) network and poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) copolymer chains is one of the most efficient means for modifying PVDF-HFP gel electrolytes. Previous preparations tend to introduce contamination into the polymer gel electrolyte because of irradiation, high temperature or the initiator needed for crosslinking which might result in the electrochemical degradation. In order to overcome the above disadvantages, a new method has been developed to successfully prepare the semi-interpenetrating polymer networks of PVDF-HFP based electrolytes with crosslinked diepoxy polyethylene glycol (DIEPEG). In this process, impurities are avoided because of a moderate reaction temperature at 50 °C and poly(ethylenimine) (PEI) as the crosslinking agent. Microporous films with various compositions are prepared and characterized. Thermal, mechanical, swelling and electrochemical properties, as well as microstructures of the prepared polymer electrolytes have been investigated using thermogravimetric analysis, electrochemical impedance spectroscopy, linear sweep voltammetry, and scanning electron microscopy. The results show that the blend polymer electrolyte with PVDF-HFP/PEI + DIEPEG (60:40 w/w) has an ionic conductivity of 2.3 mS cm^? 1 at room temperature in the presence of 1 M LiPF₆ in EC and DMC (1:1 w/w). All the blend electrolytes are electrochemically stable up to 4.8 V versus Li/Li⁺. The results reveal that this new method may be very promising for improving PVDF-HFP based electrolytes.     

Synthesis of star macromolecules for solid polymer electrolytes

The star macromolecules (SM) were synthesized from phloroglucinol, phosphorus oxychloride, and poly(ethylene glycol methyl ether) with different molecular weight. Structures of the products were characterized by Fourier transform infrared and ¹H-nuclear magnetic resonance. Solid polymer electrolyte films were prepared by mixing the products with poly(ethylene oxide) (PEO) and LiClO₄. The polymer blends of PEO and SM have been characterized by differential scanning calorimetry and thermogravimetry, and the polymer electrolytes have been characterized by alternating current impedance. All the SM products could improve the conductivities of the polymer electrolyte obviously at a temperature range from 20 °C to 80 °C.     

Effect of ethylene carbonate plasticizer and TiO<Subscript>2</Subscript> nanoparticles on 49% poly(methyl methacrylate) grafted natural rubber-based polymer electrolyte

The effect of plasticizer and TiO₂ nanoparticles on the conductivity, chemical interaction and surface morphology of polymer electrolyte of MG49–EC–LiClO₄–TiO₂ has been investigated. The electrolyte films were successfully prepared by solution casting technique. The ceramic filler, TiO₂, was synthesized in situ by sol-gel process and was added into the MG49–EC–LiClO₄ electrolyte system. Alternating current electrochemical impedance spectroscopy was employed to investigate the ionic conductivity of the electrolyte films at 25 °C, and the analysis showed that the addition of TiO₂ filler and ethylene carbonate (EC) plasticizer has increased the ionic conductivity of the electrolyte up to its optimum level. The highest conductivity of 1.1 × 10⁻³ Scm⁻¹ was obtained at 30 wt.% of EC. Fourier transform infrared spectroscopy measurement was employed to study the interactions between lithium ions and oxygen atoms that occurred at carbonyl (C=O) and ether (C-O-C) groups. The scanning electron microscopy micrograph shows that the electrolyte with 30 wt.% EC posses the smoothest surface for which the highest conductivity was obtained.     

A novel PEO-based composite polymer electrolyte with NaAlOSiO molecular sieves powders

Ion-conducting thin film polymer electrolytes based on poly(ethylene oxide) (PEO) complexes with NaAlOSiO molecular sieves powders has been prepared by solution casting technique. X-ray diffraction, scanning electron microscopy, differential scanning calorimeter, and alternating current impedance techniques are employed to investigate the effect of NaAlOSiO molecular sieves on the crystallization mechanism of PEO in composite polymer electrolyte. The experimental results show that NaAlOSiO powders have great influence on the growth stage of PEO spherulites. PEO crystallization decrease and the amorphous region that the lithium-ion transport is expanded by adding appropriate NaAlOSiO, which leads to drastic enhancement in the ionic conductivity of the (PEO)₁₆LiClO₄ electrolyte. The ionic conductivity of (PEO)₁₆LiClO₄-12 wt.% NaAlOSiO achieves (2.370 ± 0.082) × 10⁻⁴ S · cm⁻¹ at room temperature (18 °C). Without NaAlOSiO, the ionic conductivity has only (8.382 ± 0.927) × 10⁻⁶ S · cm⁻¹, enhancing 2 orders of magnitude. Compared with inorganic oxide as filler, the addition of NaAlOSiO molecular sieves powders can disperse homogeneously in the electrolyte matrix without forming any crystal phase and the growth stage of PEO spherulites can be hindered more effectively.     

Electrical properties of a solid polymeric electrolyte of PVC–ZnO–LiClO4

The ZnO filler has been introduced into a solid polymeric electrolyte of polyvinyl chloride (PVC)–ZnO–LiClO₄, replacing costly organic filler for conductivity improvement. Ionic conductivity of PVC–ZnO–LiClO₄ as a function of ZnO concentration and temperature has been studied. The electrolyte samples were prepared by solution casting technique. The ionic conductivity was measured using impedance spectroscopy technique. It was observed that the conductivity of the electrolyte varies with ZnO concentration and temperature. The temperature dependence on the conductivity of electrolyte was modelled by Arrhenius and Vogel–Tammann–Fulcher equations, respectively. The temperature dependence on the conductivity does not fit in both models. The highest room temperature conductivity of the electrolyte of 3.7 × 10⁻⁷ Scm⁻¹ was obtained at 20% by weight of ZnO and that without ZnO filler was found to be 8.8 × 10⁻¹⁰ Scm⁻¹. The conductivity has been improved by 420 times when the ZnO filler was introduced into the PVC–LiClO₄ electrolyte system. It was also found that the glass transition temperature of the electrolyte PVC–ZnO–LiClO₄ is about the same as PVC–LiClO₄. The increase in conductivity of the electrolyte with the ZnO filler was explained in terms of its surface morphology.     

Preparation and characterizations of PVAc/P(VdF-HFP)-based polymer blend electrolytes

A novel group of polymer blend electrolytes based on the mixture of poly(vinyl acetate) (PVAc), poly(vinylidene fluoride-hexafluoropropylene) (PVdF-HFP), and the lithium salt (LiClO₄) are prepared by solvent casting technique. Ionic conductivity of the polymer blend electrolytes has been investigated by varying the PVAc and PVdF-HFP content in the polymer matrix. The maximum ionic conductivity has been obtained as 0.527 × 10⁻⁴ Scm⁻¹ at 303 K for PVAc/PVdF-HFP ((25/75) wt.%)/LiClO₄ (8 wt.%). The complex formations ascertained from XRD and FTIR spectroscopic techniques and the thermal behavior of the prepared samples has been performed by DSC analysis. The surface morphology and the surface roughness are studied using SEM and AFM scanning techniques respectively.     

Effect of lithium salt concentration in PVAc/PMMA-based gel polymer electrolytes

Hybrid solid polymer electrolyte films comprising of poly(vinyl acetate) (PVAc), poly(methyl methacrylate) (PMMA), LiClO₄, and propylene carbonate are prepared by solution casting technique by varying the salt concentration. In this study, PVAc/PMMA polymer blend ratio is fixed as 25:75 on the basis of conductivity and mechanical stability of the film. X-ray diffraction, Fourier transform infrared impedance, thermogravimetry/differential thermal analysis and scanning electron microscopy studies are carried out for the polymer electrolytes. The maximum ionic conductivity is found to be 4.511 × 10⁻⁴ S cm⁻¹ at 303 K for the plasticized polymer electrolyte with 8 wt.% of LiClO₄. The ionic conductivity is found to decrease with an increase of LiClO₄ concentration.     

Lithium conducting solid polymer electrolytes based on polyacrylonitrile copolymers: Ion solvation and transport properties

The systems poly(butadiene-co-acrylonitrile) (PBAN) - lithium salts have been studied by means of X-ray and IR spectroscopy, optical microscopy and ac- and dc-conductivity measurements. X-ray and microscopy studies have confirmed that PBAN dissolves LiClO₄ up to [CN]/[Li] ≈ 2: 1. IR spectra of the samples with LiAsF₆, LiCF₃SO₃ and LiClO₄ have indicated the coordination between Li⁺ and the polar CN groups of PBAN. So, PBAN was found to be a suitable polymer matrix for SPE. The polymer films exhibited predominant ionic conductivity. Measurements of conductivity and Li transport numbers versus temperature over a wide range of salt concentrations revealed the existence of two concentration regions (within the limits of salt solubility) corresponding to liquid-like and glass-like ion transport mechanisms. New solid polymer electrolyte with lithium single-ion conductivity of 10⁻³ S cm⁻¹ at 25 – 95 °C was obtained. Paper presented at the 4th Euroconference on Solid State Ionics, Renvyle, Galway, Ireland, Sept. 13–19, 1997     

Preparation and characterization of polyindole–ZnO composite polymer electrolyte with LiClO<Subscript>4</Subscript>

This paper describes the preparation and conductivity studies of polyindole–ZnO composite polymer electrolyte (CPE) with LiClO₄. Polyindole–ZnO-based polymer nanocomposites were prepared by chemical method and characterized by XRD, infrared (IR), scanning electron microscope (SEM), transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). The IR spectrum confirms the intermolecular interaction between polyindole and ZnO. The significant spectral changes of polyindole and ZnO nancomposites reveal the strong interaction between polyindole and ZnO nanoparticles. The structural morphologies of the ZnO, polyindole, and polyindole–ZnO are obtained from SEM. The TEM image of polyindole nanocomposite shows that ZnO is embedded in polyindole matrix. An enhanced conductivity of 4.405 × 10⁻⁷ S cm⁻¹ at 50 °C for the CPE was determined from impedance studies.     

All-solid-state lithium-based polymer cells for high-temperature applications

A lithium salt doped siloxane/methacrylate copolymer membrane, prepared by a rapid UV curing process, has been characterised and tested as a fully solid electrolyte in rechargeable lithium test cells using low cost materials as electrodes. In addition, results of a laboratory-scale Li-ion polymer cell, assembled by contacting a LiFePO₄ cathode with a graphite anode and using the solid polymer as electrolyte, are presented. The polymer electrolyte production process is simple and versatile and the highly cross-linked membrane demonstrates mechanical integrity, low T _g and large thermal stability. It is an extra soft, non-crystalline, transparent solid and shows sufficient ionic conductivity (>10⁻⁴ S cm⁻¹ at 60 °C) along with a wide electrochemical stability window and improved interfacial stability with respect to lithium. The performances in Li-based cells have been determined by cycling tests carried out at 80 °C. Good rate capability, along with high charge/discharge efficiency even at 1C-rate, and a satisfactory cyclability have been obtained. These results outline the practical relevance of the use of this solid electrolyte membrane (which serves as the separator simultaneously) in Li-based cells conceived for high-temperature applications.     

Li ion conduction in TiO2 filled polyvinylidenefluoride-co-hexafluoropropylene based novel nanocomposite polymer electrolyte membranes with LiDFOB

This paper describes, nanocomposite polymer electrolyte (NCPE) based on polyvinylidenefluoride-co-hexafluoropropylene (PVdF-HFP), which comprises the novel lithium difluoro(oxalato)borate (LiDFOB). Ehtylene carbonate (EC) and diethyl carbonate (DEC) mixture was used as gelling agent and nanoparticulate TiO₂ used as filler. The NCPE membranes were subjected to a.c. impedance, tensile strength, Raman studies, TG/DTA and morphological studies. 5 wt% TiO₂ comprising membranes exhibited enhanced conductivity of 0.56 mS cm⁻¹and the Young’s modulus was increased from 1.32 to 2.74 MPa. The structural change of α to β phase was confirmed by Raman studies. The thermal stability of the NCPE membrane is found to be 130 °C. Calculation of activation energy and synthesis of LiDFOB has also been presented.     

Conductivity and thermal studies of blend polymer electrolytes based on PVAc–PMMA

The polymer electrolytes comprising blend of poly(vinyl acetate) (PVAc) and poly(methylmethacrylate) (PMMA) as a host polymer and LiClO₄ as a dopant are prepared by solution casting technique. The amorphous nature of the polymer–salt complex has been confirmed by XRD analysis. The DSC thermograms show two T_g's for PVAc–PMMA blend. A decrease in T_g with the LiClO₄ content reveals the increase of segmental motion. Conductance spectra results are found to obey the Jonscher's power law and the maximum dc conductivity value is found to be 1.76 × 10^− 3 S cm^− 1 at 303 K for the blend polymer complex with 20 wt.% LiClO₄, which is suitable for the Li rechargeable batteries. The conductivity–temperature plots are found to follow an Arrhenius nature. The dc conductivity is found to increase with increase of salt concentration in the blend polymer complexes.     

High-temperature proton conductivity in acceptor-doped LaNbO4

The conductivity of acceptor-doped LaNbO₄ has been investigated in the temperature range 300 to 1200 °C as a function of the oxygen pressure and water vapor pressure by means of impedance spectroscopy and EMF measurements. The conductivity is predominantly ionic below 800 °C in air and for higher temperatures under reducing conditions. Protons are the major ionic charge carrier in the presence of water vapor. A maximum in proton conductivity of ∼ 0.001 S/cm was obtained at 950 °C in atmospheres containing ca 2% H₂O. At high temperatures (> 1000 °C) under oxidizing conditions, electron hole conduction prevails. The conductivity has been modeled assuming that oxygen vacancies and protons compensate the acceptor doping. Transport coefficients describing mobility of defects and thermodynamic constants for the incorporation of protons have been derived.     

Novel nanocomposite membranes based on polybenzimidazole and Fe<Subscript>2</Subscript>TiO<Subscript>5</Subscript> nanoparticles for proton exchange membrane fuel cells

In this work, Fe₂TiO₅ nanoparticles were used for improving the proton conductivity, and water and acid uptake of polybenzimidazole (PBI)-based proton exchange membranes. The nanocomposite membranes have been prepared using different amounts of Fe₂TiO₅ nanoparticles and dispersed into a PBI membrane with the solution-casting method. The prepared membranes were then physico-chemically and electrochemically characterized for use as electrolytes in high-temperature PEMFCs. The PBI/Fe₂TiO₅ membranes (PFT) showed a higher acid uptake and proton conductivity compared with the pure PBI membranes. The highest acid uptake (156 %) and proton conductivity (78 mS/cm at 180 °C) were observed for the PBI nanocomposite membranes containing 4 wt% of Fe₂TiO₅ nanoparticles (PFT₄). The PFT₄ composite membrane showed 380 mW/cm² power density and 760 mA/cm² current density in 0.5 V at 180 °C at dry condition. The above results indicated that the PFT₄ nanocomposite membranes could be utilized as proton exchange membranes for high-temperature fuel cells.