Optimization of the separation of phenolic compounds by micellar electrokinetic capillary chromatography

A group of phenolic compounds including phenolic aldehydes, acids and flavonoids are separated by micellar electrokinetic chromatography (MECC). The influence of buffer (concentration and pH), concentration of sodium dodecylsulphate (SDS) and applied voltage were studied. To increase the selectivity of the separation and the resolution of the solutes organic solvents are added to the separation buffer, the best results were obtained when methanol was used at lower percentages. An optimized buffer (150 mM boric acid (pH 8.5)-50 mM SDS-5% methanol) provides the optimum separation with regard to resolution and migration time. This method was applied to the determination of these compounds in wine samples with good results.     

CZE Determination of Flavonoids in Halenia elliptica

A capillary zone electrophoretic method with UV detection at 254 nm has been developed and validated for quantitative analysis of three flavonoids, luteolin?7?O?β?D-glycoside, genkwanin, and luteolin, in Halenia elliptica. The applied voltage was 15 kV and the capillary temperature was kept constant at 25 °C. The effects on migration of buffer pH, electrolyte concentration, and organic modifier were studied systematically. Optimum separation was achieved with 20 mM borate buffer at pH 9.00 containing10% (v/v) acetonitrile. Regression equations revealed a good linear relationship between the peak area of each compound and its concentration. All correlation coefficients were 0.9999. The relative standard deviations of migration time and peak areas were, respectively, <1.58 and 5.02%(intra-day) and <1.69% and 5.36% (inter-day). The amounts of the three compounds in the different parts of H. elliptica (stems, leaves, and flowers) and in the extracts of the flowers obtained with different solvents (100% methanol and 50% and 75% methanol in water) were successfully determined with satisfactory repeatability and recovery.     

Optimization of separation and migration behavior of chloropyridines in micellar electrokinetic chromatography

The separation and migration behavior of pyridine and eight chloropyridines, including three monochloropyridines, four dichloropyridines, and 2,3,5-trichloropyridine were investigated by micellar electrokinetic chromatography using either sodium dodecyl sulfate (SDS) as an anionic surfactant or SDS-Brij 35 mixed micelles. Various parameters such as buffer pH, SDS concentration, Brij 35 concentration and methanol content that affect the separation were optimized. Complete separation of these chloropyridines was optimally achieved with a phosphate buffer containing SDS (30 mM) and methanol (10%, v/v) at pH 7.0. The resolution and selectivity of analytes could be considerably affected by the addition of methanol and/or Brij 35 to the background electrolyte. The migration order of these chloropyridines depends primarily on their hydrophobicity. However, electrostatic interactions may also play a significant role in the determination of the migration order of the positional isomers of chloropyridines.     

Study of major flavonoids in crude Scutellariae Radix by micellar electrokinetic capillary chromatography

A method of micellar electrokinetic capillary electrophoresis for determining the six flavonoids in Scutellariae Radix (i.e., baicalin, baicalein, wogonin 7-O-glucuronide, wogonin, oroxylin A 7-O-glucuronide, and oroxylin A) has been developed. The buffer solution (pH 7.24) composed of 20 mM sodium dodecyl sulfate (SDS), 20 mM sodium dihydrogen phosphate, and 25 mM sodium borate was found to be the most suitable electrolyte for the separation. The contents of the six flavonoids in crude Scutellariae Radix could easily be determined within about 15 min. On-column UV (254 nm) monitoring allowed the quantitative determination of baicalin. The effects of pH, surfactant concentration, and applied voltage on the migration behavior of the solutes were studied.     

Profiling of cocaine by micellar electrokinetic chromatography

The potential of micellar electrokinetic chromatography (MEKC) for the profiling of cocaine samples is described. An MEKC system containing sodium dodecyl sulfate (SDS) and methanol was optimized using a test mixture of cocaine, its common impurities (benzoylecgonine, norcocaine, tropacocaine, and trans-cinnamoylcocaine), and several degradation products. The effect of pH, percentage modifier, and concentration surfactant on the separation has been investigated. The optimal separation buffer for cocaine samples consisted of 75 mM SDS, 17.5% methanol, and 25 mM borate (pH 8.3) and was well suited to separate components of diverse polarity in one run. Various cocaine seizures have been analyzed with the MEKC system and their signatures were compared. The electrokinetic chromatograms obtained were characteristic, and differences and similarities among the samples could easily be observed. Several impurities were identified in the samples by means of migration times and comparison of recorded and library UV spectra. The composition of the samples was determined semiquantitatively using relative corrected peak areas.     

Use of molybdate as novel complex-forming selector in the analysis of polyhydric phenols by capillary zone electrophoresis

Molybdate was examined as a complex-forming additive to the CE background electrolytes (BGE) to affect the selectivity of separation of polyhydric phenols such as flavonoids (apigenin, hyperoside, luteolin, quercetin and rutin) and hydroxyphenylcarboxylic acids (ferulic, caffeic, p-coumaric and chlorogenic acid). Effects of the buffer concentrations and pH and the influence of molybdate concentration on the migration times of the analytes were investigated. In contrast to borate (which is a buffering and complex-forming agent generally used in CE at pH ≥9) molybdate forms more stable complexes with aromatic o-dihydroxy compounds and hence the complex-formation effect is observed at considerably lower pH. Model mixtures of cinnamic acid, ferulic acid, caffeic acid and 3-hydroxycinnamic acid were separated with 25 mM morpholinoethanesulfonic acid of pH 5.4 (adjusted with Tris) containing 0.15 mM sodium molybdate as the BGE (25 kV, silica capillary effective length 45 cm × 0.1 mm I.D., UV-vis detection at 280 nm). With 25 mM 2-hydroxy-3-[4-(2-hydroxyethyl)-1-piperazinyl]propanesulphonic acid/Tris of pH^* 7.4 containing 2 mM sodium molybdate in aqueous 25% (v/v) methanol as the BGE mixtures of all the above mentioned flavonoids, p-coumaric acid and chlorogenic acid could be separated (the same capillary as above, UV-vis detection at 263 nm). The calibration curves (analyte peak area versus concentration) were rectilinear (r > 0.998) for ≈8-35 μg/ml of an analyte (with 1-nitroso-2-naphthol as internal standard). The limit of quantification values ranged between 1.1 mg l⁻¹ for p-coumaric acid and 2.8 mg l⁻¹ for quercetin. The CE method was employed for the assay of flavonoids in medicinal plant extracts. The R.S.D. values ranged between 0.9 and 4.7% (n = 3) when determining luteolin (0.08%) and apigenin (0.92%) in dry Matricaria recutita flowers and rutin (1.03%) and hyperoside (0.82%) in dry Hypericum perforatum haulm. The recoveries were >96%.     

Enantioseparation of esbiothrin by cyclodextrin‐modified microemulsion and micellar electrokinetic chromatography

A comparison between chiral cyclodextrin‐modified microemulsion electrokinetic chromatography (CD‐MEEKC) and cyclodextrin‐modified micellar electrokinetic chromatography (CD‐MEKC) for the enantiomeric separation of esbiothrin was carried out. For both methods, the separation conditions were optimized by varying CD types and concentration, running buffer pH and compositions, organic modifiers, and temperature. The optimal CD‐MEEKC conditions were 0.8% n‐heptane, 2.3% SDS, 6.6% n‐butanol, 90.3% 10 mM sodium tetraborate containing 3% (w/v, the ratio of CD mass to microemulsion volume) methyl‐β‐cyclodextrin, pH 10, 25°C. The optimized CD‐MEKC conditions were 3.3% SDS, 96.7% 10 mM sodium tetraborate containing 5% (w/v) β‐CD, pH 10, 25°C. The difference in physicochemical properties of the buffer and CDs resulted in different optimal CD type. The competitive distribution between the microemulsion (or micelle) and chiral CD contributed to the chiral separation. Both methods provided excellent separation (R_s ～? 3) with similar migration time (ca. 15 min). CD‐MEEKC provided higher separation efficiencies (>300000) than CD‐MEKC (>200000). The LODs for CD‐MEEKC and CD‐MEKC were 4.7 μg/mL and 3.2 μg/mL, respectively. The RSDs of migration time and peak area for CD‐MEEKC were slightly higher than for CD‐MEKC. Both the demonstrated CD‐MEEKC and CD‐MEKC methods provided high efficiencies, low LODs, and reproducible enantioseparations of esbiothrin.     

Analysis of the Aerial Parts of Verbena officinalis L. by Micellar Electrokinetic Capillary Chromatography

A micellar electrokinetic capillary chromatography (MECC) method was developed for the qualitative and quantitative determination of five marker compounds (iridoid glycosides, flavonoids and phenylethanoids) in Verbena officinalis. Optimum separation was achieved using a 50 mM sodium borate solution (pH 9.3), containing 50 mM sodium dodecylsulfate (SDS) as surfactant, at an applied voltage of 25 kV and a temperature of 30 °C, respectively. Because of their different absorption maxima, the compounds were detected either at 205 or 235 nm. Calibration data confirmed linearity of the detector response within the concentration range injected (R² from 0.997 to 0.999), and revealed detection limits ranging from 5.0 g mL^–1 (verbascoside) to 13.6 g mL^–1 (hastatoside). The five markers were readily assignable in several samples of Verbena.     

Optimization of the separation of flavonoids by micellar electrokinetic capillary chromatography: Effect of organic solvents

Summary A group of flavonoids of special interest to wine quality were separated by micellar electrokinetic chromatography (MEKC) with diode array detection. Their separation was optimized as a function of the buffer concentration and pH, the concentration of sodium dodecyl sulfate (SDS) and the applied voltage. Selectivity and resolution of the solutes were increased by adding organic solvents to the separation buffer, the best results being obtained at lower concentrations. An optimized buffer with 5% methanol provided optimum separation with regard to efficiency, resolution and migration time. The optimized method was applied to the determination of these compounds in wine samples.     

市售大黄及三黄片中蒽醌类活性成分的胶束电动毛细管色谱含量测定

建立了胶束电动毛细管色谱分离和测定大黄及其制剂三黄片中蒽醌类活性组分的方法．考察了背景电解质pH、表面活性剂浓度、有机改性剂种类和浓度对分离的影响．实验结果表明：在缓冲液pH为9．5、SDS浓度为25mmol／L、乙氰浓度为20％时的优化条件下,大黄及三黄片中蒽醌类活性组分得到基线分离且方法具有较好的重现性．     

Simultaneous enantioseparation of cyproconazole,bromuconazole, and diniconazole enantiomers by CD‐modified MEKC

An efficient method for the simultaneous enantioseparation of cyproconazole, bromuconazole, and diniconazole enantiomers was developed by CD‐modified MEKC using a dual mixture of neutral CDs as chiral selector. Three neutral CDs namely hydroxypropyl‐β‐CD, hydroxypropyl‐γ‐CD, and γ‐CD were tested as chiral selectors at different concentrations ranging from 10, 20, 30 and 40 mM, but enantiomers of the studied fungicides were not completely separated. The best dual chiral recognition mode for the simultaneous separation of cyproconazole, bromuconazole, and diniconazole enantiomers was achieved with a mixture of 27 mM hydroxypropyl‐β‐CD and 3 mM hydroxypropyl‐γ‐CD in 25 mM phosphate buffer (pH 3.0) containing 40 mM SDS to which methanol‐acetonitrile (10%:5% v/v) was added as organic modifiers. The best separation was based on the appearance of 10 peaks simultaneously, with good resolution (R_s 1.1–15.9), and peak efficiency (N>200 000). Good repeatabilities in the migration time, peak area, and peak height were obtained in terms of RSD ranging from (0.72 to 1.06)%, (0.39 to 3.49)%, and (1.90 to 4.84)%, respectively.     

Far infrared-assisted extraction followed by MEKC for the simultaneous determination of flavones and phenolic acids in the leaves of Rhododendron mucronulatum Turcz

A method based on micellar electrokinetic chromatography with amperometric detection and far infrared‐assisted extraction has been developed for the simultaneous determination of two flavones (rutin and farrerol) and three phenolic acids (syringic acid, vanillic acid, and 4‐hydroxybenzoic acid) in the dried leaves of Rhododendron mucronulatum Turcz., a commonly used traditional Chinese medicine. The effects of some important factors such as the voltage applied on the infrared generator, irradiation time, the concentration of borate and sodium dodecylsulfate (SDS), separation voltage, and detection potential were investigated to acquire the optimum conditions. The detection electrode was a 300‐μm diameter carbon disc electrode. The five analytes could be well separated within 8 min in a 40 cm‐long capillary at a separation voltage of 12 kV in a 50 mM borate buffer (pH 9.2) containing 50 mM SDS. The relationship between peak current and analyte concentration was linear over about three orders of magnitude with the detection limits (S/N=3) ranging from 0.20 to 0.46 μM. The results indicated that far infrared irradiations significantly enhanced the extraction efficiency. The extraction time was substantially reduced to 6 min compared with 3 h for conventional hot solvent extraction.     

Separation and determination of alantolactone and isoalantolactone in traditional Chinese herbs by capillary electrophoresis

A simple micellar electrokinetic chromatography (MEKC) method, using a 20 mM borate buffer (pH 8.0) with 25 mM SDS in the presence of 10% (V/V) methanol, was established for the identification and determination of two isomers, alantolactone (AL) and isoalantolactone (IAL), in the extracts of Inula helenium L. and Inula racemosa Hook f. Regression equations revealed linear relationships (correlation coefficients: 0.9990 for AL, 0.9991 for IAL) between the peak area of AL and IAL and their concentration. The relative standard deviations of the migration time and peak area of the two constituents were 1.51, 1.62 and 2.01, 1.98%, respectively. The recoveries of the two constituents ranged between 95–105% for AL and 93–108% for IAL.     

Determination of flavonoid aglycones in several food samples by mixed micellar electrokinetic chromatography

The application of mixed micellar electrokinetic chromatography to the separation of ten flavonoid aglycones (catechin, epicatechin, naringenin, morin, fisetin, quercetin, kaempferol, galangin, apigenin, and chrysin) belonging to four different classes (flavanols, flavanones, flavonols, and flavones), and expected to be prominent in commonly consumed foods, has been developed. A micellar system composed of 25 mM SDS and 25 mM sodium cholate buffered at pH 7.0 provided a simultaneous separation of all compounds in less than 20 min. The procedure could be easily adapted to the determination of some flavonoids from each of these classes in real complex samples (propolis, Ginkgo biloba, etc.). The LODs of these compounds were in the range of 1.2-4 microg/mL, and the peak area and migration time repeatabilities were below 6.0 and 3.1%, respectively.     

大气漂尘中苯并[a]芘的简单同步荧光测定

通过选择合适的能量差(Δ-υ=1 400 cm-1),建立了大气漂尘中苯并[a]芘的恒能量同步荧光分析法。苯并[a]芘在甲醇与十二烷基磺酸钠(SDS)溶液中均有良好的线性关系(R>0.999),检出限分别达到1.34 nmol/L与0.40 nmol/L。该法亦可应用于18种多环芳烃混合物中苯并[a]芘的鉴别。     

Volume phase transition and structure of poly(N-isopropylacrylamide) microgels studied with 1H-NMR spectroscopy in D2O

Thermoresponsive colloidal microgels were prepared by polymerisation of N-isopropylacrylamide (NIPAM) with varying concentration of a cross-linking monomer, N,N-methylenebisacrylamide (MBA), in water with either 0.4 or 6.7 mM concentration of an anionic surfactant, sodium dodecylsulphate (SDS). Volume phase transitions of the prepared microgels were studied in D₂O by ¹H-NMR spectroscopy including the measurements of spin–lattice (T1) and spin–spin (T2) relaxation times for the protons of poly(N-isopropylacrylamide) (PNIPAM) at temperature range 22–50 °C. In addition, microcalorimetry, turbidometry, dynamic light scattering and electrophoretic mobility measurements were used to characterise the aqueous microgels. The results from the different characterisation methods indicated that PNIPAM microgels prepared in 6.7 mM SDS concentration are structurally different compared to their correspondences prepared in 0.4 mM concentration. Increasing MBA concentration in the microgel synthesis appears to increase the structural heterogeneity in both cases of SDS concentration. PNIPAM structures with significantly higher molecular mobilities at temperatures above 35 °C were observed in the microgels prepared in 0.4 mM SDS concentration, as indicated by the ¹H NMR relaxation times of different PNIPAM protons. We conclude that the high mobilities measured with NMR at elevated temperatures and also the clearly negative values of zeta potential are in connection to a fairly mobile surface layer with polyelectrolyte nature and a consequent high local lower critical solution temperature.     

Determination of lignans in Schisandra chinensis using micellar electrokinetic capillary chromatography

Micellar electrokinetic capillary chromatography (MEKC) has been developed as a promising method for the determination of lignans in plant samples. The separation conditions have been optimized with respect to the different parameters including sodium dodecyl sulfate (SDS) and acetonitrile concentration, pH of the background electrolyte, separation voltage, and capillary temperature. The background electrolyte consisting of 40 mM SDS and 35% acetonitrile in 10 mM tetraborate buffer (pH 9.3) was found to be the most suitable electrolyte for this analysis. The applied voltage of 28 kV (positive polarity) and the capillary temperature 25 degrees C gave the best separation of lignans. The interday reproducibility of the peak areas and the migration times was below 2.0%. The results of MEKC analyses were compared with those obtained by capillary electrochromatography (CEC) and reversed-phase high-performance liquid chromatography (RP-HPLC). The possibilities of using this method for the determination of lignans in drug and in serum samples were also tested.     

Analysis of steroids by nonaqueous capillary electrophoresis

A simple method for the separation and determination of steroids (estradiol valerate, triamcinolone, levonorgestrel and ethinylestradiol) in single and compound tablets by nonaqueous capillary electrophoresis with ultraviolet (UV) spectrophotometric detection has been developed for the first time. After optimizing the electrophoretic parameters, including the nature of electrolytes and composition of organic solvent, the running buffers of methanol-acetonitrile (95: 5, v/v) containing 20 mM sodium acetate (pH 6.5) and methanol-acetonitrile (90: 10, v/v) containing 25 mM sodium acetate (pH 7.0) were found to be most suitable for determining estradiol valerate and triamcinolone, respectively. Reliable separation and simultaneous determination of levonorgestrel and ethinylestradiol were achieved in methanol containing 20 mM of ammonium acetate and 10 mM of sodium dodecyl sulfate (SDS). Tamoxifen was used as internal standard. Performance of the method, including migration time and peak area reproducibility, linearity, sensitivity and accuracy, were also evaluated. The limits of detection (S/N = 3) for four analytes were in the range of 9.8–19.5 μ g/mL. The relative standard deviations (RSD) of the migration times and peak areas of the analytes were in the range of 0.14–1.0% and 0.7–2.7% (intraday), 0.5–2.8% and 1.5–4.2% (interday), respectively. Within the tested concentration range, linear relationships between peak area ratios and concentrations of the analytes were obtained (correlation coefficients: 0.9987–0.9996). The method has been successfully applied to the determination of ingredients with recoveries over the range of 96.6–100.6%. The text was submitted by the authors in English.     

Micellar electrokinetic capillary chromatography for the determination of Viagra and its metabolite (UK-103,320) in human serum

Micellar electrokinetic capillary chromatography (MEKC) was investigated for the determination of Viagra (sildenafil citrate, SC) and its metabolite (UK-103,320) in human serum in a concentration range of clinical interest. For MEKC, human serum samples spiked with SC and UK were obtained directly after elution with methanol from a tC18 cartridge. The extract was evaporated and regenerated in a solution 1 mM of phosphate buffer (pH 12.3) which contained a methanol percentage of 20% that was analyzed using phosphate buffer (pH 12.3, 10 mM) containing 30 mM sodium dodecyl sulfate (SDS) as separation electrolyte and a fused-silica capillary. This method gave satisfactory interday precision with respect to migration times relative standard deviation (RSD < 1%) and linear responses for the concentration ranges investigated (0.50-3.50 mg L(-1) for the compound SC and 0.90-4.60 mg L(-1) for UK). An intraday RSD (n = 5 graphs) between the slopes of the calibration graphs was acceptable (6.40%) for SC and (3.37%) for UK. A satisfactory interday precision between slopes was also obtained (RSD 4.10% for SC and a RSD 2.72% for UK) which demonstrated the ruggedness of this method. Detection limits (S/N = 3) were about 200 ng/mL for both compounds in human serum. MEKC was shown as a good method with regards to simplicity, precision and sensitivity.     

用胶束电动毛细管色谱法分离黄芩中黄酮类有效成分

应用胶束电动毛细管色谱技术分离黄芩中主要的黄酮类有效成分并进行分析,确定它们分别是：黄芩甙、黄芩素、汉黄芩甙、汉黄芩素、木蝴蝶素Ａ及木蝴 Ａ－７－Ｄ－葡萄糖甙。缓冲液由２０ｍｍｏｌ／ＬＳＤＳ、２０ｍｍｏｌ／ＬＬ的磷酸三氮钠及２５ｍｍｏｌ／Ｌ的硼砂组成,溶液的Ｐ来７．２４。在胶束电动车管色谱分析中,黄芩中的主要黄酮类有铲成分在１５ｍｉｎ内即可达到基线分离,并且能对黄芩甙进行定量分析,笔者还讨论了表面