Fabrication of Gold‐Directed Conducting Polymer Nanoarrays for High‐Performance Gas Sensor

Gold‐directed polypyrrole (PPy) nanoarrays are fabricated by hydrogel‐assisted nanotransfer edge printing (HnTEP) and electrochemical polymerization. Gold nanoarrays are fabricated through the HnTEP method, which involves metal deposition, hydrogel etching, and nanotransfer edge printing. By utilizing the well‐positioned gold nanostructures, PPy nanoarrays with smooth morphology and controllable dimensions are fabricated through in situ electrochemical polymerization, the results of which are characterized by scanning electron microscopy and atomic force microscopy. A gas sensor based on PPy nanoarrays results in excellent sensing capabilities towards NH₃ detection, especially the sensitivity and fast response. This method appears to be general and may aid in the future design and implementation of other active materials which can also be manipulated by the same procedure and serve as functional components for chemical sensing, optoelectronics, biodetection, and other applications.     

Patterned Growth of Vertically Aligned Polypyrrole Nanowire Arrays

A facile strategy for preparing vertically aligned polypyrrole (PPy) nanoarrays with precisely controlled density and quantity is presented. The method involves two steps: (1) the fabrication of the patterned substrate via electron beam lithography and (2) the controlled growth of PPy nanowires via electrochemical polymerization on the patterned substrate. The electrical property of a single PPy nanowire is investigated via in situ conducting probe atomic force microscopy.     

Preparation of Conducting Composite Materials Based on Polymer Nanofibers and Polypyrrole

Conducting materials based on polypyrrole-modified nanofibers of polylactides of different molecular masses and copolymers of ε-caprolactam (–NH–(CH₂)₅–CO–) and hexamethylenediamine adipate (–H(CH₂)₆NHCO(CH₂)₄CO–) were prepared. As shown by scanning electron microscopy, oxidative polymerization of pyrrole on the polymer nanofiber matrix depends on the nanofib er hydrophilicity. The heterophase synthesis of polypyrrole on the surface of hydrophilic nanofibers of the aliphatic copolyamide allowed uniform coating of the material surface with polypyrrole nanoparticles. The surface resistivity of the composite material was about 0.4 kΩ sq^–1.     

Rectification in Supramolecular Zinc Porphyrin/Fulleropyrrolidine Dyads Self‐Organized on Gold(111)

Self‐assembled donor/acceptor dyads are of current interest as they are biomimetic to the natural photosynthetic conversion system. Herein, we present an ultrahigh‐vacuum scanning tunneling microscopy and scanning tunneling spectroscopy (UHV‐STM/STS) study of ex situ self‐assembled supramolecular dyads consisting of fulleropyrrolidines (PyC₂C₆₀) axially ligated to zinc(II) tetraphenylporphyrin (ZnTPP), self organized on a 4‐aminothiophenol (4‐ATP) self‐assembled monolayer on gold(111). These dyads show both bias‐polarity‐dependent apparent height in STM images and highly rectifying behavior in tunneling spectroscopy. First‐principles density functional theory calculations clarify the conformational and electronic properties of the 4‐ATP/ZnTPP/PyC₂C₆₀ system. Interestingly, we find easier tunneling for electrons moving from the acceptor side of the dyads to the donor side, in the inverse‐rectifying sense with respect to previously reported molecular rectifiers. Such behavior cannot be explained as an elastic resonant tunneling process, but it can by using a model based on the Aviram–Ratner mechanism.     

Electrochemical fabrication of novel fluorescent polymeric film: Poly(pyrrole–pyrene)

We describe herein the electrochemical characterization and polymerization of 4-pyren-1-yl-butyric acid 11-pyrrol-1-yl-decyl ester (pyrrole–pyrene) in CH₃CN. The electrochemical oxidation of the pyrrole group at 0.77 V vs Ag/Ag + 10 mM in CH₃CN led to the first example of a fluorescent polypyrrole film. The mechanism of deposition on platinum electrode was studied by voltammetry and chronoamperometry. The optical properties of the polymeric films electrogenerated on ITO electrodes were examined by UV–visible spectroscopy and fluorescence microscopy indicating an increase in fluorescence properties by increased polymer thickness. The electrochemical oxidation of pyrenyl group linked to the polypyrrole backbone was carried out at 1.2 V. This additional polymerization was demonstrated by UV–visible spectroscopy and induced the loss of the fluorescence properties of the resulting polymeric film.     

Transition Metal Salt Doping on Polypyrrole/MWCNT Composites for Supercapacitor Applications

Polypyrrole doped by Zn²⁺ ions was synthesized as nanocomposites with MWCNT by in-situ oxidative polymerization and investigated as electrode material for supercapacitors. The uniform coating of polypyrrole on MWCNT was characterized by field emission scanning electron microscopy (FESEM) and high resolution transmission electron microscopy (HRTEM). The effect of Zn²⁺ ions were characterized by Fourier transform infrared (FTIR) spectroscopy. The electrochemical performances were investigated by cyclic voltammetry (CV), constant current charging/discharging cyclic test (CC) and electrochemical impedance spectroscopy (EIS) using a three-electrode system. The doped polypyrrole composites show higher specific capacitance and better cyclic stability.     

Preparation of gold nanoislands on various functionalized polymer-modified glass and ITO for electrochemical characterization of monolayer assembly of alkanethiols

Nanometer dimension of citrate-capped gold nanoparticles can be firmly bound with various functionalized polymer-modified glass plate and indium tin oxide (ITO) substrates. Herein we report 3-aminopropyltriethoxysilane, polyvinyl pyridine, polyethylene imines, etc. as binding agents to modify these substrates to stabilize the charged colloidal gold nanoparticles through electrostatic stabilization of gold nanoparticles. When gold nanoparticles pretreated substrate are exposed into the seeding growth solution, the preadsorbed gold nanoparticles grow further and then form nanoislands of gold on glass and ITO substrates. The formation of nanoislands on microscope glass slide and ITO was monitored with UV-visible spectroscopy, cyclic voltammetry, and atomic force microscopy methods. The gold nanoislands and gold nanoparticles pretreated substrates can be used as platform to study the self-assembling behavior of long chain alkanethiols such as C₁₂SH, C₁₆SH, and C₁₈SH. The binding, coverage, and electron transfer characteristics of monolayer assembly on modified gold nanoisland and nanoparticles modified substrates are studied using electrochemical studies. The gold substrates can be prepared by this method, which is simple and reproducible and can be applied to various sensor and electrocatalytic applications.     

Synthesis,core-shell structures and properties of fluorene/polypyrrole composite

In the current study, fluorene/polypyrrole composite with the core-shell structure has been synthesized by in situ oxidative polymerization of pyrrole in the presence of fluorene. Composite was characterized by X-ray diffraction, Fourier transform infrared spectroscopy, and scanning electron microscopy. Electrical performance of the composite prepared at various reaction conditions was tested. The composite has the best performance of electrical conductivity when FeCl₃–pyrrole molar ratio is equal to 3 and the reaction time is 18 h. It was found that polypyrrole could be formed on the surface of fluorene due to strong π–π interactions between the fluorene core and the polypyrrole shell.     

原位包覆导电聚吡咯的Li1.26Fe0.22Mn0.52O2富锂铁锰基正极材料的制备及电化学性能的提高

采用化学氧化聚合的方法成功合成了导电聚吡咯(PPy)包覆的纳米尺寸Li_1.26Fe_0.22Mn_0.52O₂(LFMO)正极材料。通过X射线衍射(XRD)检测样品的晶体结构,并通过扫描电子显微镜(SEM)和透射电子显微镜(TEM)观察材料形态和微观结构。元素映射和傅里叶变换红外光谱结果表明,PPy导电网络存在于复合材料中,并且PPy均匀分布在LFMO颗粒上。通过恒流充放电测试和电化学阻抗谱(EIS)分析研究了所有样品的电化学性能,结果表明表面上的PPy显著降低了LFMO的电荷转移电阻。包覆PPy质量分数为2%的LFMO-2%PPy表现出极好的倍率性能和良好的循环稳定性,其在1C倍率下首次放电容量为206 mAh·g^-1,首圈库仑效率为87%,在1C和2C分别循环50圈后,其容量分别稳定在131和139 mAh·g^-1。     

A new polypyrrole/maghemite hybrid as a lithium insertion electrode

A new polypyrrole (PPY)/maghemite (γ-Fe₂O₃) hybrid was prepared by modification of the surface of maghemite nanoparticles using polymerization of pyrrole on the surface. Fourier Transform infrared (FTIR), X-ray diffraction and electron microscopy studies have proven that it was only a surface modification, keeping the core structure unchanged. Transmission electron micrographs have shown the presence of PPY on the intergrain surface between maghemite particles, leading to reduction of particle aggregation. The electrochemical lithium capacity has increased up to 270 mAh/g in the potential range between 1.3 and 4.3 V vs. Li at 8 mA/g. The modified samples showed an enhanced cyclability compared to the pristine one.     

Electrochemical copolymerization of pyrrole and 2,2-bithiophene and semiconducting characterization of the resulting copolymer films by electrochemical impedance spectroscopy and photoelectrochemistry

The electrochemical copolymerization of pyrrole and bithiophene was studied at a polymerization potential of 1.1 V for various monomer ratios. The cyclic voltammograms showed that the electrochemical properties of the resulting copolymer films changed gradually from those of polypyrrole to polybithiophene with an increase in concentration of bithiophene in the initial electrolyte. The evidence for copolymer formation is based on the analytical results of electrospray ionization mass spectroscopy, thermoanalysis, and Raman spectroscopy. The results showed that cooligomers and homooligomers were found in the electrolyte after copolymerization. The difference between the morphology of a copolymer of pyrrole and bithiophene and a polymer mixture of polypyrrole and polythiophene was demonstrated by scanning electron microscopy. Electrochemical impedance and photocurrent measurements were carried out in order to achieve information on the semiconducting properties of the homopolymers and copolymers obtained. A model of a very thin layer of polypyrrole formed immediately on the electrode surface covered by a thicker copolymer film was developed to explain the results.Dedicated to Zbigniew Galus on the occasion of his 70^th birthday.     

Electrochemical Characterization of Self‐Assembled Monolayer of a Novel Manganese Tetrabenzylthio‐Substituted Phthalocyanine and Its Use in Nitrite Oxidation

Manganese phthalocyanine MnPc(SPh)₄ has been synthesized and used to form self assembled monolayers on gold electrodes. The well packed SAM monolayer was characterized by analyzing the blocking of a number of Faradic processes by cyclic voltammetry, evaluating the electrical characteristics of the modified electrode by electrochemical impedance and imaging the modified surface by electrochemical scanning microscopy. Finally, MnPc(SPh)₄‐SAM modified electrode displayed an electrocatalytic behavior toward the oxidation of nitrite.     

Surface modification of FePO4 particles with conductive layer of polypyrrole

Polypyrrole–FePO₄ powder was synthesized by an oxidative polymerization of pyrrole monomer on the surface of FePO₄ powder. The polymerization reaction was initiated using hydrogen peroxide in an acidified solution and catalysed with Fe³⁺. The samples were investigated by light microscopy (LM), scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDX). These methods confirmed the presence of polypyrrole on FePO₄ particles and its homogeneous distribution in the composite material. To determine the PPy content in the PPy–FePO₄ composites a thermogravimetric analysis was used. Cyclic voltammetry curves (CV) were measured and compared in a non-aqueous lithium salt solution for electrodes consisting of pellets made from pure FePO4 and FePO₄/PPy. Electrochemical impedance spectroscopy (EIS) showed that coating of PPy significantly decreases the charge transfer resistance of PPy–FePO₄ electrodes.     

还原氧化石墨烯/金纳米修饰电极在新冠病毒检测中的应用

研究使用电化学沉积法在丝网印刷碳电极表面制备了还原氧化石墨烯和金纳米颗粒,构建了一种用于新冠病毒检测的石墨烯电化学传感器。通过扫描电子显微镜(SEM)和相应的电化学方法对纳米复合材料在电极表面的成功修饰进行了表征分析。并采用差分脉冲伏安法对传感器的性能进行检测,实验构建的电化学传感器具有良好的灵敏度,该传感器检线性范围为10_-10^-10_-6^mol/L,具有良好的重复性和特异性。     

氧化石墨烯/聚吡咯插层复合材料的制备和电化学电容性能

以FeCl₃-甲基橙(MO)为模板, 通过化学原位聚合法成功制备出氧化石墨烯/聚吡咯(GO/PPy)插层复合材料. 采用X射线衍射(XRD)、傅里叶变换红外(FTIR)光谱、扫描电镜(SEM)和透射电镜(TEM)等测试技术对复合材料进行物性表征. 此外, 利用循环伏安、恒电流充放电和交流阻抗测试方法对复合材料在两种不同水系电解液(1 mol·L^-1 Na₂SO₄和1 mol·L^-1 H₂SO₄)中的电化学性能进行了研究. 结果显示: 氧化石墨烯和聚吡咯表现出各自优势并发挥协同作用, 使得GO/PPy插层复合材料在中性和酸性电解液中都显示出可观的比电容. 电流密度为0.5 A·g^-1时, GO/PPy 插层复合材料在Na₂SO₄和H₂SO₄电解液中的比电容分别为449.1 和619.0 F·g^-1, 明显高于纯PPy的比电容. 经过800 次循环稳定性测试后, 两种不同电解液中, 复合材料初始容量的保持率分别为92%和62%. 其中酸性电解液体系中初始容量更大, 而中性溶液中具有更稳定的循环性能.     

Highly selective electrochemical method for the detection of serotonin at carbon fiber microelectrode modified with gold nanoflowers and overoxidized polypyrrole

A gold nanoflowers and overoxidized polypyrrole modified carbon fiber microelectrode (OPPy/Au NFs/CFME) was fabricated using electroless deposition and electrochemical method for highly selective and sensitive detection of 5-HT.     

Facile and scalable fabrication of graphene/polypyrrole/MnO<Subscript>x</Subscript>/Cu(OH)<Subscript>2</Subscript> composite for high-performance supercapacitors

In this study, to improve the specific capacitance of graphene-based supercapacitor, novel quadri composite of G/PPy/MnO_x/Cu(OH)₂ was synthesized by using a facile and inexpensive route. First, a two-step method consisting of thermal decomposition and in situ oxidative polymerization was employed to fabricate graphene/polypyrrole/manganese oxide composites. Second, Cu(OH)₂ nanowires were deposited on Cu foil. Afterwards, for the electrochemical measurements, composite powders were deposited on Cu(OH)₂/Cu foil substrate as working electrodes. The synthesized samples were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), Fourier transform infrared (FT-IR) spectroscopy, and Raman spectroscopy. The XRD analysis revealed the formation of PPy/graphene, Mn₃O₄/graphene, and graphene/polypyrrole/MnO_x. In addition, the presence of polypyrrole and manganese oxides was confirmed using FT-IR and Raman spectroscopies. Graphene/polypyrrole/MnO_x/Cu(OH)₂ electrode showed the best electrochemical performance and exhibited the largest specific capacitance of approximately 370 F/g at the scan rate of 10 mV/s in 6 M KOH electrolyte. In addition, other electrochemical measurements (charge–discharge, EIS and cyclical performance) of the G/Cu(OH)₂, G/PPy/Cu(OH)₂, G/Mn₃O₄/Cu(OH)₂, and G/PPy/MnO_x/Cu(OH)₂ electrodes suggested that the G/PPy/MnO_x/Cu(OH)₂ composite electrode is promising materials for supercapacitor application.     

Enhancement of oxygen reduction at Co-porphyrin catalyst by supporting onto hybrid multi-layered film of polypyrrole and polyoxometalate-modified gold nanoparticles

Three-dimensional multi-layered films (on glassy carbon) composed of networks of polyoxometallate (PMo₁₂O₄₀ ³⁻)-modified gold nanoparticles linked together through the alternately deposited ultra-thin layers of polypyrrole have served as active supports for Co-porphyrin catalytic centers. The hybrid organic-inorganic films (supports) have been prepared by using the layer-by-layer approach. The fact that polyanionic (phosphomolybdate) adsorbates on gold nanoparticles are attracted by positively charged sites of conducting polymer (polypyrrole) structures leads to the stabilizing effect and facilitates distribution of Au nanostructures. The systems have been characterized using scanning electron microscopy, as well as with chronoamperometric and voltammetric techniques. By supporting Co-porphyrin centers onto the hybrid film of the polymer-linked phosphomolybdate-stabilized gold nanoparticles, significant electrocatalytic enhancement effects (namely voltammetric current increases) have been observed during the electroreduction of oxygen in acid medium relative to a standard response of the simple porphyrin deposit on glassy carbon measured under analogous conditions. Among important issues is the high activity of the hybrid film (support) itself toward the reductive decomposition of hydrogen peroxide to water. When it comes to performance of the Co-porphyrin-containing system, it is reasonable to expect that the O₂ reduction process is initiated at Co-porphyrin catalytic sites (two-electron reduction to H₂O₂) and continued (two-electron reduction to H₂O) at the hybrid film containing gold nanoparticles dispersed within the highly porous cauliflower-like structures of polypyrrole multi-layers. While the gold networks facilitate charge distribution within the hybrid electrocatalytic film, non-covalent π-π interactions of porphyrin rings with polypyrrole interlayers and charge transfers between negatively charged (PMo₁₂O₄₀ ³⁻ modified) gold nanoparticles and positively charged nitrogen sites of polypyrrole could also cause synergism.

     

Novel chemical synthesis of polypyrrole thin film electrodes for supercapacitor application

Present investigation describes the cost-effective, novel and simple chemical synthesis of polypyrrole (PPy) thin films for supercapacitor application. These PPy films are characterized by different techniques such as X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The XRD pattern reveals the amorphous nature of PPy thin film, which is highly feasible for supercapacitors. Further, FTIR study confirms the formation of PPy. The surface morphological study exhibit the coverage of uniform and smooth morphology on thin film. The electrochemical supercapacitive properties of PPy thin films are evaluated using cyclic voltammetry (CV) in 0.5 M H₂SO₄ electrolyte, which exhibits the maximum specific capacitance of 329 Fg⁻¹ at the scan rate of 5 mV s⁻¹. Additionally, an equivalent series resistance (ESR) of PPy thin films is found to be 1.08 Ω using electrochemical impedance measurement.