Nd:YAG激光器光栅式扫描预处理的计算模拟与优化分析

 采用计算模拟的方法,研究了光栅式扫描预处理的扫描方式以及脉冲能量波动、定位误差对预处理效率的影响。研究发现,脉冲能量波动及其定位误差使预处理效率降低,同时其影响与扫描方式之间存在相互调制作用,因此可以通过选择合适的扫描方式以及扫描间隔来优化预处理流程,提高预处理效率。此外发现,光斑呈等边三角形排列时的预处理效率优于正方形。     

Optimum beam steering of optical phased arrays using mixed weighting technique

In this paper, we present a novel technique for high precision optical beam steering of optical phased arrays (OPA) using mixed weighting method. Optimal OPA parameters are determined to obtain the best beam directivity by minimizing the main lobe width and eliminating grating lobes of the far field diffraction pattern. The quantitative analysis for a fibre-type optical phased array is given. The calculation results demonstrate that the grating lobe level can be distinctly reduced from 80% to 20% of the main lobe level. Thus, the mixed weighting technique proposed in this paper can substantially improve the beam steering efficiency and the beam quality.     

Size of the Detection Area of a Phase-Doppler Anemometer for reflecting and refracting particles

Measurements of particle size distributions in multi-phase flows with a phase-Doppler anemometer yield incorrect results if polydisperse particles are investigated. For weighting biased size distributions, different in situ methods, requiring the size of the detection area, are known, but all of these weighting procedures are restricted to very small measuring volumes if off-axis instrument configurations are considered. Moreover, the weighting functions have some disadvantages in the case of poor statistics in single size classes or the results are not suitable for determining the size of the detection area for particles which are larger than the beam waist. Therefore, the intention in this work was to measure the size of the detection area for different kinds of monodisperse particles, different instrument configurations and varied instrument sensitivities experimentally and to develop an improved weighting procedure that copes with the above difficulties. The application of the results obtained from the investigations with monodisperse particles to measured particle size distributions and volume flux densities of polydisperse water droplets in a spray cone of an atomizer confirms the applicability of this weighting procedure. It is still restricted to directed flows, perpendicular to the fringes.     

Measurement of the structure coefficient of refractive index fluctuations in a turbulent premixed butane-air flame by means of a laser-based interferometer technique

With a view to measuring the structure coefficient of refractive index fluctuations in a turbulent premixed butane-air flame, a thin laser beam is sent into the flame perpendicular to the flow direction. The laser beam generally undergoes fluctuations of direction, phase, and amplitude. Only the random deflections of the laser beam may be taken into account. After having traversed the flame, the perturbed laser beam enters into an interferometric system. Materials and experimental procedure are described. In the unperturbed interference pattern, the zones only sensitive to fluctuations of the angle-of-arrival of the laser beam are detected. From the random displacements of the central bright fringe, the structure coefficient of refractive index fluctuations in the flame is measured. To prove that the method of measurement is satisfactory, the result obtained is applied for computing the power spectral density of the angle-of-arrival of the laser beam from the formula of correlations of the laser beam deflection angles which we have demonstrated in previous works. This computed power spectral density is compared to that measured from the effective position of the detector. A good agreement is observed between the two results.     

菲涅耳阵在固体中所产生的声束聚焦和扫描特性

用固体表面上的菲涅耳换能器阵实现固体中声束的聚焦和扫描,它具有实用意义。本文将分别运用标量和矢量理论,分析菲涅耳阵在固体中产生的声束特性。理论与实验结果进行了比较。最后,基于射频频谱分析的角度,对聚焦束的建立时间和加权技术进行了研讨。 关键词：     

超宽谱电磁脉冲孔缝耦合实验研究

建立了一种研究超宽谱电磁脉冲孔缝耦合特性的实验方法和实验装置,并对不同辐照脉宽、不同口径和不同深度的圆孔的耦合场进行了测量,该方法在一定的时间窗口内避开了反射场和散射场对耦合场的影响。实验结果表明:相同入射场幅值条件下,耦合场的幅值随着脉冲宽度和孔深的增加而减小,随着孔径的增大而增大。     

不同波形脉冲激光的时域误差对相干合成的影响

相干合成技术是实现高功率、高亮度光纤激光系统的重要技术途径.然而, 脉冲激光阵列中常常存在时域误差,这将影响脉冲激光的相干合成效果. 建立了脉冲激光存在时域误差时的相干合成理论模型,并在不同波形(方波、三角波、正弦波) 的脉冲激光存在时域误差时,对相干合成光束在远场的脉冲波形、峰值功率、 光强分布和桶中功率(PIB)等特性进行了数值计算和对比分析.计算结果表明: 方波脉冲激光相干合成光束的脉冲波形受时域误差影响严重,光强分布和PIB随着时域误差 的增大发生线性变化;三角波脉冲激光相干合成光束的脉冲波形和峰值功率受时域误差 影响严重,光强分布和PIB在时域误差较大时随着时域误差的增大发生较为剧烈的变化; 正弦波脉冲激光相干合成光束具有较好的输出特性,在两路正弦波脉冲激光相干合成中, 将两脉冲之间的时延控制在脉冲持续时间的10%以内,就能取得良好的合成效果.     

Optimizing the performance of TOAD by changing the wavelength and power of control pulse

The performance of terahertz optical asymmetric demultiplexer (TOAD) has been studied by modelling the semiconductor optical amplifier (SOA) in which the intraband effects had been taken into account. Numerical results are coincident with the experiment results. We interpret why there are three peaks in the switching window, which has never been reported before. In addition, we put forward the definition of the flatness of the switching window of TOAD for the first time By analysing the different phase of clockwise and counter clockwise signal pulse changed by SOA, appropriate peak power of control pulse and wavelength of signal and control pulse have been calculated in order to obtain large output power and flat switching window of TOAD.     

一种激光驱动的超短X射线光源

介绍一种可产生超短脉冲的新型Ｘ射线光源。它由多碱光电阴极、金靶及铍输出窗组成，当该射线管的阴极受到强光照射时，产生光电子发射，并经电场加速后轰击金靶，产生连续谱的Ｘ射线轫致辐射，经铍窗输出。用超短的可见光脉冲驱动该光源，并借助Ｘ射线扫描相机测量了该管的Ｘ射线输出，获得了５ｐｓ的Ｘ射线脉冲，这种光源可方便地用来标定Ｘ射线扫描相机的时间分辨率，此种产生超短电子脉冲的方法可在其他方面获得应用。     

Laser surface cleaning, de-rusting, de-painting and de-oxidizing

Many materials have been tested as substrates and surface products. Typically ferrous (Carbon Steels and Stainless Steels) and non-ferrous (Al and Cu metals and its alloys) materials have been employed. Some epoxy, polyurethane, polyester and acrylic paints with different thickness and colour have been tested. Many types of surface rust and oxide on different bulk material have been undertaken to test. Similarly, some different types of oils and greases commonly used in industry to prevent oxidation, have been studied. Different types of laser sources have been employed: an axial fast flow, 1.5 kW CO₂ c.w. and pulsed laser source emitting a 10.6 7m beam; and a portable Nd:YAG laser, Q-switchedand normal-mode source: 1st harmonic 1.064 7m (6 ns pulse duration), 2nd harmonic 532 nm (120 7s duration pulse, 1 J max per pulse) wavelengths, multi-articulated seven mirror beam guiding device, 20 Hz repetition rate. This provides shots with 600 mJ maximum energy per pulse and 100 MW peak power per pulse with very low beam divergence: 0.5 mrad at full angle.     

Experimental and numerical investigation on structural effects of laser pulses for modal parameter measurement

In this paper it has been described part of the research devoted to the development of a complete non-intrusive experimental modal analysis procedure based on laser techniques both for excitation and for measurement. In particular, attention has been focused on the thermal effects generated by laser pulses on the excited structure. An analytical model of the energy exchange between the light pulse and the target surface is proposed together with a finite element model of thermal and mechanical behaviour of the structure under excitation. Both the models (analytical and numerical) have been experimentally validated by measuring the thermal and the vibration responses induced by the laser pulses. The experimental part of the study has been performed on a cantilever beam excited with laser pulses from an Nd : YAG source (532 nm, 100 mJ/pulse) using an high-speed infrared camera and a scanning laser Doppler vibrometer. Results from this work can be used to improve understanding concerning the features of laser excitation and to establish a mechanical equivalent system of forces and moments, useful in order to increase the accuracy in the measurements of modal parameters when laser pulses are used as excitation sources.     

Efficient modal control strategies for active control of vibrations

Some efficient strategies for the active control of vibrations of a beam structure using piezoelectric materials are described. The control algorithms have been implemented for a cantilever beam model developed using finite element formulation. The vibration response of the beam to an impulse excitation has been calculated numerically for the uncontrolled and the controlled cases. The essence of the method proposed is that a feedback force in different modes be applied according to the vibration amplitude in the respective modes i.e., modes having lesser vibration may receive lesser feedback. This weighting may be done on the basis of either displacement or energy present in different modes. This method is compared with existing methods of modal space control, namely the independent modal space control (IMSC), and modified independent modal space control (MIMSC). The method is in fact an extension of the modified independent space control with the addition that it proposes to use the sum of weighted multiple modal forces for control. The proposed method results in a simpler feedback, which is easy to implement on a controller. The procedure is illustrated for vibration control of a cantilever beam. The analytical results show that the maximum feedback control voltage required in the proposed method is further reduced as compared to existing methods of IMSC and MIMSC for similar vibration control. The limitations of the proposed method are discussed.     

低重复频率激光放大系统中再生腔的结构性能及实验研究

本文从高斯光束的理论出发,充分考虑到放大介质的克尔非线性效应的影响,引入了一个与之相应的非线性传输矩阵,对低重复率的钛宝石激光放大系统中的再生腔的结构性能进行了分析研究。并以此为根据,在实验上设计了激光放大再生腔,实现了TEM_oo模激光振荡,并得到了腔倒空脉冲。     

Optimization of transmitting beam patterns of a conformal transducer array

A method is presented to calculate the driving-voltage weighting vector of a conformal array of underwater acoustic transmitting transducers to obtain a low-sidelobe beam pattern based on the measured receiving array manifold. The relationship among three quantities is given, which are, respectively, the radiated acoustic field, the measured receiving array manifold matrix and the driving-voltage weighting vector of the transducer array. Then, the driving-voltage weighting vector of the array is calculated using the optimization method to obtain a low-sidelobe transmitting beam pattern. At the frequency of 12.5 kHz, the receiving array manifold matrix of a 27-element conformal array is measured in an anechoic water tank. The driving-voltage weighting vector of the array is calculated using the proposed method. In addition, the computer simulation and experiments are carried out. The results agree well and show that the proposed method can obtain a low-sidelobe transmitting beam pattern and at the same time provide the largest amplitude of pressure in the axial direction when the maximum amplitude of the driving voltages of the array elements keeps unchanged.     

关于被动锁模激光器涨落模型的补充说明

本文考虑了在被动锁模涨落模型中涨落脉冲集合中的脉冲数目对锁模的影响,并研究了激光器腔长对于锁模窗口和锁模阈值的影响。 关键词：     

Multiresolution analysis of fluctuations in non-stationary time series through discrete wavelets

We illustrate the efficacy of a discrete wavelet based approach to characterize fluctuations in non-stationary time series. The present approach complements the multifractal detrended fluctuation analysis (MF-DFA) method and is quite accurate for small size data sets. As compared to polynomial fits in the MF-DFA, a single Daubechies wavelet is used here for detrending purposes. The natural, built-in variable window size in wavelet transforms makes this procedure well suited for non-stationary data. We illustrate the working of this method through the analysis of binomial multifractal model. For this model, our results compare well with those calculated analytically and obtained numerically through MF-DFA. To show the efficacy of this approach for finite data sets, we also do the above comparison for Gaussian white noise time series of different sizes. In addition, we analyze time series of three experimental data sets of tokamak plasma and also spin density fluctuations in 2D Ising model.     

DC-SC光阴极注入器的束载实验的调试进展

 北京大学射频超导实验室设计了新型超导光电子枪——DC-SC光阴极注入器，目标是为自由电子激光平台提供能量在2~3MeV，脉宽小于10ps，脉冲重复频率为81.25MHz，平均流强约为1mA的低发射度电子束。现在已经建成了DC-SC光阴极注入器实验平台，包括激光驱动光阴极系统，Pierce直流高压加速结构，1.3GHz 1＋1/2纯铌超导腔，恒温器低温系统，4.5kW连续波微波系统，1/16分频与同步控制系统，束流诊断系统和能量分析系统等。并且完成了超导腔的静态实验，直流加速结构也经过了100μA低电流测试。实验结果符合设计要求，整体调试后即可以进行束载实验。     

The effect of the laser pulse shape on the wakefield generation in field-ionized plasma

In this paper, the effect of the laser pulse shape on the generation and evolution of the wakefield during the interaction of the intense laser pulse with the gas have been studied utilizing the parallel relativistic PIC simulation code. In order to reach this aim, three pulses with length 300 fs and different rise-times 30, 45, and 60 are typically selected. Our results show that, the amplitude of the laser wakefield produced in the gas in comparison with the plasma strongly depends on the laser pulse shape. The simulation results indicate that for the high-slope laser pulse time (here 30 fs), ionization and thus density fluctuations have no significant effect on the wakefield generation because of rapid increase of the laser electric field. While by increasing the laser pulse rise-time to 45 fs, the rapid wave breaking due to the change in the medium refractive index during the gas ionization, prevents from the wakefield amplitude growth, so that the wakefield with larger amplitude is emerged in the plasma. For a slow-sloping pulse (here 60 fs), the ratio of the wakefield generation in the gas to the plasma is altered for the different gas densities and laser intensities. Moreover, it is represented that the longer the laser pulse rise-time, the sooner difference between the wakefield produced in the gas and plasma is observed. In fact, the larger the rise-time, the greater the density fluctuations and, consequently, the larger the initial noise is generated to seed the Raman instability.     

Continual deformation analysis with scanning phase method and time sequence phase method in temporal speckle pattern interferometry

If a laser beam illuminates a continual deformation object surface, it will lead to a temporal speckle pattern on the observation plane. Recording this time-dependent speckle pattern the deformation of the surface of an object can be obtained. Two methods, scanning phase method (SPM) and time sequence phase method (TSPM), have been introduced for measuring the displacement caused by the deformation in temporal speckle pattern interferometry (TSPI). Their principle is that by capturing a series of speckle interference patterns related to the object deformations, the fluctuations in the intensity of the interference patterns can be obtained. Through scanning these fluctuations and estimating both the average intensity and modulation of the temporal speckle interference patterns, the phase maps for whole-field displacements are calculated. In this way one is capable of quantitatively measuring continual displacements simply using a conventional electronic speckle pattern interferometry (ESPI) system without phase shifting or a carrier. The elaboration on the new methods is given in this paper and experiments are performed to demonstrate their performance with a conventional ESPI system.     

Collimation effects on large CPA compressors

Modelling and analysis have been performed to show a link between laser collimation tolerances and dispersion effects in chirped pulse amplification (CPA) compressors. These show that an un-collimated beam can present itself as residual dispersion in a CPA system which uncorrected will have adverse effects on laser power and intensity. The techniques of shearing interferometry and beam propagation over large distances for setting beam collimation have been assessed for their limitations in measuring wavefront radii. An analysis of the sensitivity of CPA systems to non-collimated beams has been studied. This effect has been practically demonstrated for a high-power Nd:glass laser and the best techniques for alignment are discussed.