Catalytic adsorptive stripping voltammetric determination of copper(II) on a carbon paste electrode

A catalytic adsorptive stripping voltammetric method for the determination of copper(II) on a carbon paste electrode (PCE) in an alizarin red S (ARS)-K₂S₂O₈ system is proposed. In this method, copper(II) is effectively enriched by both the formation and adsorption of a copper(II)-ARS complex on the PCE, and is determined by catalytic stripping voltammetry. The catalytic enhancement of the cathodic stripping current of the Cu(II) in the complex results from a redox cycle consisting of electrochemical reduction of Cu(II) ion in the complex and subsequent chemical oxidation of the Cu(II) reduction product by persulfate, which reduces the contamination of the working electrode from Cu deposition and also improves analytical sensitivity. In Britton-Robinson buffer (pH 4.56±0.1) containing 3.6×10⁻⁵ mol L⁻¹ ARS and 1.6×10⁻³ mol L⁻¹ K₂S₂O₈, with 180 s of accumulation at −0.2 V, the second-order derivative peak current of the catalytic stripping wave was proportional to the copper(II) concentration in the range of 8.0×10⁻¹⁰ to ∼3.0×10⁻⁸ mol L⁻¹. The detection limit was 1.6×10⁻¹⁰ mol L⁻¹. The proposed method was evaluated by analyzing copper in water and soil.     

Solid-state Cu (II) ion-selective electrode based on polyaniline-conducting polymer film doped with copper carmoisine dye complex

A pencil graphite electrode coated by copper (II)–carmoisine dye complex in polyaniline (emeraldine base form) matrix (termed as PGE/PA/Cu-Car) was prepared and used as copper ion-selective electrode. The introduced electrode was found to have high selectivity toward copper ion (II) and exhibited wide working concentration range, low response time, and good shelf life. The sensor electrode showed a linear Nernstian response over the range of 5.0 × 10⁻⁶ to 1.0 × 10⁻¹ M with a slope of 29.7 ± 1 mV per decade change in concentration. A detection limit of 2.0 × 10⁻⁶ M was obtained. The optimum pH working range of the electrode was found to be 4.0–7.0.     

Subnanomolar determination of a beryllium ion by a novel Be(II) microsensor based on 4-nitrobenzo-9-crown-3-ether

In this work, for the first time, we introduce a highly selective and sensitive Be(II) microsensor. 4-nitrobenzo-9-crown-3-ether (NBCE) was used as a membrane-active component to prepare a Be(II)-selective polymeric membrane microelectrode. The electrode exhibits a Nernstian response toward Be(II) ions over a very wide concentration range (1.0 × 10⁻⁴–1.0 × 10⁻¹⁰ M), with a detection limit of 3.5 × 10⁻¹¹ M (∼350 pg/L). In fact, the electrode presents a fast response time in the whole concentration range (6 s). The proposed microelectrode can be used for at least six weeks without any considerable divergence in the potentials. The proposed membrane sensor revealed a selectivity toward Be(II) ions over a wide variety of other metal ions including common alkali, alkaline-earth, and rare-earth ions. It could be used in the pH range of 3.0–11.5. The microelectrode was successfully used as an indicator electrode for the titration of 20 mL of 1.0 × 10⁻⁶ M Be²⁺ solution with 1.0 × 10⁻⁴ M of EDTA. It was also applied to the direct determination of beryllium ions in beryl and binary mixtures. The text was submitted by the authors in English.     

Simultaneous determination of uric acid and ascorbic acid at a ferrocenium–thioglycollate modified electrode

Self-assembled monolayers (SAMS) of chemisorbed thioglycollate on a gold electrode surface have been used as a base interface for the electrostatic adsorption of ferrocenium ion. Electrochemical impedance spectra (EIS) and cyclic voltammetry (CV) were used to evaluate the electrochemical properties of the supramolecular film. The bare gold electrode failed to distinguish the oxidation peaks of ascorbic acid (AA) and uric acid (UA) in phosphate buffer solution (PBS, pH 7.0), while the ferricinium–thioglycollate modified electrode could separate them efficiently. In differiential pulse voltammetric measurements, the prepared gold electrode could separate AA and UA signals, allowing the simultaneous determination of AA and UA. Under optimal conditions and within the linear range of 1.0 × 10⁻⁶ to 5.0 × 10⁻⁴ M, the detection limits of AA and UA achieved were 2.0 × 10⁻⁷ and 1.0 × 10⁻⁷ M, respectively. The applicability of the prepared electrode was demonstrated by measuring AA and UA in human urine without any pretreatment. Figure Fabrication process for the modified electrode     

The complex (2,3;6,7;10,11;14,15-tetraphenyl-4,9,13,16-tetraoxo-1,5,8,12-tetraazacyclohexadecane) copper(II) as a carrier for a salicylate-sensitive poly(vinylchloride) membrane electrode

A new salicylate-selective electrode based on the complex (2,3;6,7;10,11;14,15-tetraphenyl-4,9,13,16-tetraoxo-1,5,8,12-tetraazacyclohexadecane) copper(II) [CuL] as the membrane carrier was developed. The electrode exhibits a good Nernstian slope of −60.9 ± 1.0 mV/decade and a linear range from 1.0 × 10⁻⁶ to 1.0 × 10⁻¹ M for salicylate. The detection limit is 5.0 × 10⁻⁷ M. The electrode has a fast response time (5–15 s) and can be used for more than three months. The selective coefficients were determined by the fixed interference method (FIM) and separate solution method (SSM). The salicylate-selective electrode could be used in the pH range 3.5–10.5. It was employed as an indicator electrode for direct determination of salicylate in pharmaceutical samples. Published in Russian in Elektrokhimiya, 2008, Vol. 44, No. 9, pp. 1147–1154. The text was submitted by the authors in English.     

PVC-based Cu (II)-Schiff base complex membrane coated graphite electrode for the determination of the triiodide ion

A triiodide-selective electrode based on copper (II)-Schiff base complex as a membrane carrier is proposed. The electrode was prepared by incorporating the carrier into a plasticized polyvinylchloride (PVC) membrane and was directly coated on the surface of a graphite electrode. The obtained electrode showed a near Nernstian slope of 57.0 ± 0.4 mV/decade to I ₃ ⁻ ions over an activity range of 1.0 × 10⁻⁵−1.0 × 10⁻¹ M with a limit of detection of 4.8 × 10⁻⁶ M. The response time of the electrode was fast (5 s) and the electrode could be used for about 2 months without considerable divergence in response. The potentiometric selectivity coefficients were evaluated and displayed anti-Hofmeister behavior. The electrode was used as an indicator electrode in the potentiometric titration of the triiodide ion and in the determination of ascorbic acid in vitamin C tablets. The text was submitted by the authors in English.     

Electrochemical behavior of uric acid at a penicillamine self-assembled gold electrode

The fabrication and electrochemical characteristics of a penicillamine (PCA) self-assembled monolayer modified gold electrode were investigated. The electrode can enhance the electrochemical response of uric acid (UA), and the electrochemical reaction of UA on the PCA electrode has been studied by cyclic voltammetry and differential pulse voltammetry. Some electrochemical parameters, such as diffusion coefficient, standard rate constant, electron transfer coefficient and proton transfer number have been determined for the electrochemical behavior on the PCA self-assembled monolayer electrode. The electrode reaction of UA is an irreversible process, which is controlled by the diffusion of UA with two electrons and two protons transfer at the PCA/Au electrode. In phosphate buffer (pH 5.0), the peak current is proportional to the concentration of UA in the range of 6.0 × 10⁻⁵–7.0 × 10⁻⁴ mol L⁻¹ and 2.0 × 10⁻⁵–7.0 × 10⁻⁴ mol L⁻¹ for the cyclic voltammetry and differential pulse voltammetry methods with the detection limits of 5.0 × 10⁻⁶ and 3.0 × 10⁻⁶ mol L⁻¹, respectively. The method can be applied to determine UA concentration in real samples.     

Electrochemical behavior and determination of epinephrine at a mercaptoacetic acid self-assembled gold electrode

The electrochemical behavior of epinephrine (EP) at a mercaptoacetic acid (MAA) self-assembled monolayer modified gold electrode was studied. The MAA/Au electrode is demonstrated to promote the electrochemical response of epinephrine by cyclic voltammetry. The possible reaction mechanism is also discussed. The diffusion coefficient D of EP is 6.85 × 10⁻⁶ cm² s⁻¹. In 0.1 mol L⁻¹ phosphate buffer (pH 7.20), a sensitive oxidation peak was observed at 0.177 V, and the peak current is proportional to the concentration of EP in the range of 1.0 × 10⁻⁵–2.0 × 10⁻⁴ mol L⁻¹ and 1.0 × 10⁻⁷–1.0 × 10⁻⁶ mol L⁻¹. The detection limit is 5 × 10⁻⁸ mol L⁻¹. The modified electrode is highly stable and can be applied to the determination of EP in practical injection samples. The method is simple, quick, sensitive and accurate.     

Determination of copper(II) in wastewater by electroplating samples using a PVC-membrane copper(II)-selective electrode

A PVC membrane containing 4-amino-6-methyl-1,2,4-triazin-3,5-dithione (AMTD) as a suitable ionophore, exhibits a Nernstian response for Cu²⁺ ions over a wide concentration range up to 1 × 10⁻¹ and 1 × 10⁻⁶ M, with a detection limit of 7.5 × 10⁻⁷ M in the pH range 3.0–7.5. It has a fast response time (<15 s) and can be used for at least 12 weeks without any major deviation in the potential. The electrode revealed a very good selectivity with respect to all common alkali, alkaline-earth, transition, and heavy-metal ions. It was successfully applied to the recovery of copper ions from wastewater. The electrode was also used as an indicator electrode in the potentiometric titration of Cu(II) ions with EDTA. The text was submitted by the authors in English.     

Simultaneous Determination of Dopamine and Ascorbic Acid at a Triazole Self-Assembled Monolayer-Modified Gold Electrode

A 3-amino-5-mercapto-1,2,4-triazole (TA) self-assembled monolayer-modified gold electrode (TA SAM/Au) is characterized by X-ray photoelectron spectroscopy, A.C. impedance, cyclic voltammetry, chronoamperometry and chronocoulometry. The TA SAM/Au exhibited good promotion of the electrochemical oxidation of dopamine. Some electrochemical parameters of dopamine such as electron transfer number, exchange current density, standard heterogeneous rate constant, diffusion coefficient, etc., were measured by different electrochemical methods. The peak currents of dopamine were linearly dependent on its concentration in the range of 1.5 × 10⁻⁶–1.0 × 10⁻⁴ mol L⁻¹, with a detection limit of 5.0 × 10⁻⁷ mol L⁻¹. The oxidative peak potentials of dopamine and ascorbic acid were well separated at about 190 ± 10 mV in pH 2.0 BR buffers at TA SAM/Au, the oxidation peak current increases approximately linearly with increasing concentration of both dopamine and ascorbic acid in the concentration range of 9.98 × 10⁻⁶–4.54 × 10⁻⁴ mol L⁻¹. It can be used for simultaneous determination of dopamine and ascorbic acid.     

Voltammetric study of the interaction of the ofloxacin–copper complex with DNA, and its analytical application

The electrochemical behavior of the ofloxacin–copper complex, Cu(II)L₂, at a mercury electrode, and the interaction of DNA with the complex have been investigated. The experiments indicate that the electrode reaction of Cu(II)L₂ is an irreversible surface electrochemical reaction and that the reactant is of adsorbed character. In the presence of DNA, the formation of the electrochemically non-active complexes Cu(II)L₂-DNA, results in the decrease of the peak current of Cu(II)L₂. Based on the electrochemical behavior of the Cu(II)L₂ with DNA, binding by electrostatic interaction is suggested and a new method for determining nucleic acid is proposed. Under the optimum conditions, the decrease of the peak current is in proportional to the concentration of nucleic acids in the range from 3 × 10⁻⁸ to 3 × 10⁻⁶ g · mL⁻¹ for calf thymus DNA, from 1.6 × 10⁻⁸ to 9.0 × 10⁻⁷ g · mL⁻¹ for fish sperm DNA, and from 3.3 × 10⁻⁸ to 5.5 × 10⁻⁷ g · mL⁻¹ for yeast RNA. The detection limits are 3.3 × 10⁻⁹, 6.7 × 10⁻⁹ and 8.0 × 10⁻⁹ g · mL⁻¹, respectively. The method exhibits good recovery and high sensitivity in synthetic samples and in real samples.     

A novel chemically modified carbon paste electrode based on a new mercury(II) complex for selective potentiometric determination of bromide ion

A new modified carbon paste electrode based on a recently synthesized mercury (II) complex of a pyridine containing proton transfer compound as a suitable carrier for Br⁻ ion is described. The electrode has a linear dynamic range between 3.00×10⁻² and 1.0×10⁻⁵ M with a near-Nernastian slope of 61.0±0.9 mV per decade and a detection limit of 4.0×10⁻⁶ M (0.32 ppm). The potentiometric response is independent of the pH of the solution in the pH range 4.0–8.3. The electrode possesses the advantages of low resistance, fast response and good over a variety of other anions. It was applied as an indicator electrode in potentiometric titration of bromide ions and for the recovery of Br⁻ from tap water.     

Determination of acetaminophen by square wave voltammetry at a gold electrode modified by 4-amino-2-mercaptopyrimidine self-assembled monolayers

A 4-Amino-2-mercaptopyrimidine self-assembled monolayer (AMP SAMs/Au) modified gold electrode was prepared. The electrochemical behavior of acetaminophen on the AMP SAMs/Au was studied in Britton-Robinson (BR) buffer solution. Compared to a bare gold electrode, the modified electrode exhibits a significant enhancement in the oxidation current response for acetaminophen. The modified electrode was used for the determination of acetaminophen by square wave voltammetry. The oxidation current increased linearly with the concentration of acetaminophen in the range of 2.0 × 10⁻⁶−4.0 × 10⁻³ M. The modified electrode made it possible to eliminate the interference of dopamine (DA), brucine, epinephrine (EP), and norepinephrine (NE). The practical analytical utility was illustrated by the determination of acetaminophen in a commercially available drug. The text was submitted by the authors in English.     

Simultaneous electrochemical detection of uric acid and ascorbic acid at a silver doped poly(glutamic acid) modified glassy carbon electrode

In this paper, the silver doped poly (L-glutamic acid) modified glassy carbon electrode (PLG-Ag/GCE) was fabricated through an electrochemical immobilization. The modified electrode was used for simultaneous determination of uric acid (UA) and ascorbic acid (AA) in 0.1 M phosphate buffer solutions (PBS). The cyclic voltammetric signals of UA and AA were well separated with a potential difference of 396 mV in pH 3.0 phosphate buffer solution. The linear calibration curves were obtained in the concentration range 5.00 × 10⁻⁷–1.00 × 10⁻⁴ M for UA and 8.00 × 10^-6–5.00 × 10⁻³ M for AA with the detection limits of 3 × 10⁻⁷ M and 4 × 10⁻⁶ M, respectively. The relative standard deviations were 1.3 and 1.0% for the determinations of UA and AA for 20 continuous measurements. The signal was highly stable and reproducible. This method was successfully applied to the determination of UA in human urine samples.     

Quartz Crystal Microbalance for Selenite Sensing Based on Growth of Cadmium Selenite Crystals Immobilized on a Monolayer of Phosphorylated 11-Mercapto-1-Undecanol

 A quartz crystal microbalance (QCM) sensor for selenite ions in aqueous solution was constructed based on crystal formation of cadmium selenite, immobilized with a self-assembly monolayer (SAM) of phosphorylated 11-mercapto-1-undecanol (MUD) on a QCM gold electrode surface. The mass change caused by the selective adsorption of selenite ions on the cadmium selenite crystals at the solid/solution interface was detected by the QCM. The response (−ΔF) of the modified QCM oscillator increased with increasing selenite ion concentrations in sample solutions, ranging from 9.7×10⁻⁵ to 9.0×10⁻⁴ M at pH 7.4. The synthetic process of anchoring cadmium selenite crystals on the phosphorylated MUD organic film was also followed by using X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). The atomic concentrations measured by XPS confirmed the crystal growth of cadmium selenite on the phosphorylated MUD SAM at the QCM gold electrode surface. From the AFM images, changes in surface topographic features were followed: the MUD SAM and phosphorylated MUD on the QCM gold electrode had similar surface roughness; however the difference for the cadmium selenite film on the phosphorylated MUD SAM was clearly seen. The observed QCM frequency change of the modified QCM oscillator per unit time was found to be proportional to the square of the supersaturation of cadmium selenite, indicating the crystal growth of cadmium selenite at the solid/solution interface. The modified QCM oscillator exhibited selectively strong QCM response to SeO₃ ²⁻ ion. In contrast, the responses to tested interfering anions were almost negligible. The order of anion selectivities of the present modified QCM sensor was SeO₃ ²⁻≫CO₃ ²⁻>SeO²⁻ ₄, SO₄ ²⁻, Br⁻, I⁻, NO₃ ⁻. These selectivities were basically attributable to the differences in solubility products and solubilities for the salts of each anion with cadmium (II) ion. Received May 12, 1998. Revision December 29, 1998.     

Electrocatalytic determination of dopamine in pharmaceutical and human serum samples by using [N,N′-bis(2-pyridine carboxamido)-1,2-benzene] nickel(II) modified carbon paste electrode

The main purpose of this study is to develop an inexpensive, simple, selective and especially sensitive modified carbon paste electrode (MCPE) for the determination of dopamine (DA) in pharmaceutical and human serum samples. The carbon paste electrode (CPE) has been modified by using [N,N′-bis(2-pyridine carboxamido)-1,2-benzene] nickel(II) complex (Ni(II)bpb) and the electrochemical behavior of the modified electrode has been studied by cyclic voltammetry. The modified electrode shows an excellent electrocatalytic effect on the oxidation of DA. Under optimum conditions, calibration plots are found to be linear in the range of 7.0 × 10⁻⁷−1.0 × 10⁻⁵ M (r ₂ = 0.9940) and 1.0 × 10⁻⁵−1.0 × 10⁻⁴ M (r₂ = 0.9945); the detection limit is 6.2 × 10⁻⁸ M. The preparation of MCPE is very easy. The electrode can be renewed by simple polishing. The proposed method shows good sensitivity, reproducibility (RSD ∼ 2.9%), high stability (more than two month) without any considerable change in response and recovery for the determination of DA. The prepared electrode has been successfully applied to the voltammetric determination of DA in pharmaceutical and biological samples. The article is published in the original.     

Sensitive voltammetric detection of clomipramine at 16-mercapto-hexadecanoic acid self-assembled monolayer modified gold electrode

Clomipramine, an effective and important antipsychotic drug with low redox activity and poor hydrophilicity, was found to effectively accumulate on hydrophobic 16-mercaptohexadecanoic acid (i.e. MHA) self-assembled monolayer (SAM) modified gold electrode (i.e. MHA/Au) and generating a sensitive anodic peak at about 0.86 V (vs. SCE) in 0.05 M Tris–HCl (pH = 8.1) buffer solution. Thus, quantitative measurement of clomipramine was established with high sensitivity under optimum conditions. The anodic peak current was linear to clomipramine concentration in the range from 1 × 10⁻⁶ to 5 × 10⁻⁵ M, with a detection limit of 6 × 10⁻⁹ M. This method was successfully applied to the detection of clomipramine in drug tablets and proved to be reliable compared to UV. The spectral features, electrochemical characteristics and wettability of MHA-SAM were also studied. Correspondence: Jilie Kong, Department of Chemistry, Fudan University, Shanghai 200433, P.R. China     

Voltammetric Determination of Folic Acid with a Multi-Walled Carbon Nanotube-Modified Gold Electrode

The voltammetric behavior of folic acid (FA) at a multi-walled carbon nanotube (MWNT) modified gold electrode has been investigated by cyclic voltammetry, chronoamperometry and chronocoulometry. The modified electrode exhibits a good promoting effect on the electrochemical reaction of FA. FA can generate a well-defined anodic peak at around 0.83 V (vs. SCE) in 0.1 M H₃PO₄–NaH₂PO₄ buffer solution of pH 2.5. The peak results from a 2-electron transfer of FA, and the standard potential of FA is estimated to be 0.79 V (vs. SCE). The parameters affecting the response of FA, such as solution pH, accumulation time, accumulation potential, and amount of MWNTs are optimized for the determination of FA. Under the optimum conditions, the peak current changes linearly with FA concentration in the range from 2.0 × 10⁻⁸ M to 1.0 × 10⁻⁶ M. This method has been applied to the determination of FA in drug tablets, and the recovery is 93.9–96.9%. In addition, the influence of some coexistent species is examined. When a Nafion layer is introduced on the gold electrode before deposition of MWNTs, the resulting composite electrode can give better response to FA. At the same time, the interference by some foreign species is suppressed to some extent.     

Simultaneous voltammetric determination of epinephrine and serotonin at a p-tetra-butyl calix [6] arene-L-Histidine chemically modified electrode

A new p-tetra-butyl calix [6] arene-L-Histidine chemically modified glassy carbon electrode (BCH/GCE) has been proposed for simultaneous investigation and determination of epinephrine (Ep) and serotonin (5-HT) by cyclic voltammetry (CV) and differential pulse voltammetry (DPV). In potassium dihydrogen phosphate-borax (PDPB) buffer solution (pH 5.8), the anodic peaks of Ep and 5-HT were observed at 0.27 and 0.45 V, respectively, with E up to 180 mV. The peak currents on the DP voltammogram are in a linear relationship with the concentrations of Ep in the range of 1.0 × 10⁻⁶−1.30 × 10⁻⁴ M in the presence of 1.0 × 10⁻⁴ M 5-HT. A linear relationship was similarly found for 5-HT in the range 1.0 × 10⁻⁶⁻ 1.40 × 10⁻⁴ M in the presence of 1.0 × 10⁻⁴ M Ep. It is found that Ep and 5-HT could be simultaneously determined with good sensitivity in the presence of 1.0 × 10⁻³ M ascorbic acid (AA). The developed method has been applied to the determination of Ep and 5-HT in synthetic samples with satisfactory results. The text was submitted by the authors in English.     

New adsorptive square wave method for trace determination of prilocain in the flow injection system by a fast fourier analysis

The determination of prilocain, used to manage tonic-clonic seizures, has been carried out at micro gold electrode (Au UME) using continuous fast Fourier transform square wave voltammetry. The Au UME electrode exhibited an effective response towards prilocaine adsorption. The peak current was also found to be significantly increased. The determination was carried out in phosphate containing electrolyte in the pH of 2.0 and a well-defined change on the peak current were noticed. The peak current was found to be linearly dependent on concentration of prilocain in the concentration range 5.0 × 10⁻⁷–1.0 × 10⁻¹¹ M with a detection limit of 5.0 × 10⁻¹² M. This paper describes development of a new analysis system to determine of prilocain by a novel square wave voltammetry method to perform a very sensitive method. The method used for determination of prilocain by measuring the changes in admittance voltammogram of a gold ultramicroelectrode (in 0.05 M H₃PO₄ solution) caused by adsorption of the prilocain on the electrode surface. Variation of admittance in the detection process is created by inhibition of oxidation reaction of the electrode surface, by adsorbed of prilocain. Furthermore, signal-to-noise ratio has significantly increased by application of discrete Fast Fourier Transform (FFT) method, background subtraction and two-dimensional integration of the electrode response over a selected potential range and time window. Also in this work some parameters such as SW frequency, eluent pH, and accumulation time were optimized. The relative standard deviation at concentration 5.0 × 10⁻⁸ M is 5.8% for 5 reported measurements.