Estimation of diffusion parameters in functionalized silicas with modulated porosity. Part I: chromatographic studies

The diffusion parameters of binary gas mixture He (tracer gas)-N2 (carrier gas) in hybrid organic-inorganic SiO2-X porous solids which have suffered gradual functionalization with functional groups X of increasing length (X = psi, [triple bond]Si-H, [triple bond]Si-CH2OH, [triple bond]Si-(CH2)3OH, [triple bond]Si-(CH2)11CH3) are reported. The effective diffusivities Deff, the Henry law constants K as well as the tortuosity factors tau for the examined solids were estimated by a typical pulse gas chromatographic method. Analysis of the experimental results was carried out by the well-known method of linearization of moments. The moments s analysis provides a powerful means for extracting diffusion parameters from the experimental response curves The proposed methodology is simple compared to other similar studies and provides rapidly reliable data. The results of this work indicate that the effective diffusivity Deff in porous networks drops markedly as the initial porosity of the parent SiO2 sample is blocked by the functionalization of the pore surfaces with functional groups of increasing size, [triple bond]Si-H, [triple bond]Si-CH2OH, [triple bond]Si-(CH2)3OH and [triple bond]Si-(CH2)11CH3. The low values of the Henry law constants K found indicate that the adsorption of He on the porous surfaces for all the solids is weak. Also, the tortuosity factor r is proportionally correlated to the pore blocking effects and the percolation phenomena of gases flowing into the porous network.     

Mucoadhesive vaginal film of fluconazole using cross-linked chitosan and pectin

A series of silica gels (Si-40, Si-60, Si-100) and related carbon–silica gels, prepared by carbonization of CH₂Cl₂ at a surface of silica gels at 550 °C, characterized using FTIR/PAS, SEM/EDX, and nitrogen adsorption, was investigated upon interactions with polar (water, dimethylsulfoxide), weakly polar (chloroform), and nonpolar (n-hexane, n-decane, benzene, toluene) adsorbates using adsorption and differential scanning calorimetry methods. Features of confined space effects, such as freezing/melting point depression and melting delay, depend strongly on pore sizes, pore wall structure, type and amount of adsorbates, and the degree of pore filling. Melting curves of both polar and nonpolar adsorbates bound in broad pores (Si-60 and Si-100 based materials) can include two–three peaks around melting point, but for Si-40-based materials, a number of similar peaks is smaller. This occurs due to step-by-step melting of frozen structures located in broader pores and the absence of similar effects in narrower pores. The present study shows that complex carbon–silica gel adsorbents can be more effective adsorbents than simple silica gels due to the presence of a number of surface sites of various polarity and structure.

     

Metal-modified silica adsorbents for removal of humic substances in water

As novel adsorbents for humic substances, Fe-, Mg-, and Ca-modified silica gels SiO(2)Fe, SiO(2)Mg, and SiO(2)Ca were prepared, and their adsorbabilities to humic and fulvic acids were evaluated in water at 25 degrees C for 20 h. Among these adsorbents, SiO(2)Fe indicated the highest adsorbability, in which removing humic substances in water was accomplished to 80-97%. By calcination at 600 degrees C and washing with water, adsorbabilities of the silica adsorbents deteriorated except for the case of calcination of SiO(2)Ca. This is due to changing metal modification structures and losing chlorine, judging from elemental analysis, TG-DTA, and XPS. Especially, the modifier Fe was tightly fixed on the silica surface of SiO(2)Fe, since the metal content was almost constant even after the calcination and water washing unlike the other adsorbents. Therefore, we found that SiO(2)Fe is the most useful adsorbent among the silica adsorbents and that its modification structure is composed of SiOFe, FeCl, and FeOH. In addition, the adsorption mechanism is explained by an interaction between Fe and humic substance molecule having carboxylate and phenolate groups, accompanied with anion exchange of chloride ion Cl(-) for the humic substance molecule via the silica pores. SiO(2)Fe may be applied to an adsorbent alternative for charcoal in water purification plants, and the used SiO(2)Fe may be further reused as a fertilizer since humic substances have plant-glowing ability and silica strengthens plant parts.     

Silylation of a Co/SiO2 catalyst. Characterization and exploitation of the CO hydrogenation reaction

Several silylated- and nonsilylated Co/SiO2 catalysts have been prepared by reaction of the surface silanol groups with hexamethyldisilazane (HMDS). These samples have been characterized by means of N2 adsorption isotherms, solid-state nuclear magnetic resonance (29Si and 1H), X-ray photoelectron spectroscopy, thermogravimetric analysis, and diffuse reflectance IR spectroscopy. We have focused on the study of the silylated surface stability at high temperatures and in different atmospheres. The characterization techniques have shown that silica silylation after cobalt impregnation leads to a silylated SiO2 surface composed of hydrophobic Si-(CH3)3 species highly stable up to 600-650 K in both oxidizing and reducing atmospheres. However, X-ray diffraction and temperature-programmed reduction have shown that the hydrophobic nature of the silica surface does not affect the metal dispersion and its reducibility. The materials prepared in this way have been tested as catalysts for the Fischer-Tropsch synthesis reaction. The CO conversion reaction rate increased over the silylated catalyst, probably as a consequence of the higher number of available active sites because water adsorption over the catalyst surface is impeded. However, catalyst deactivation was not affected by the hydrophobic nature of the support, suggesting that carbon deposition is the more probable mechanism of cobalt-based catalyst deactivation during the Fischer-Tropsch synthesis.     

Ionic silica based hybrid material containing the pyridinium group used as an adsorbent for textile dye

The present study reports the development of an ionic silica based hybrid material containing the cationic pyridinium group, which was employed for the removal of the Reactive Red 194 textile dye from aqueous solution. Three hybrid material samples were prepared with planned textural and chemical properties, varying the inorganic precursor molar percentage in the sol-gel synthesis. The obtained samples were defined as Py/Si-90, Py/Si-92 and Py/Si-94, where the number specifies the inorganic molar percentage. The hybrid samples were characterized by elemental, infrared, (13)C and (29)Si NMR, N(2) adsorption-desorption isotherms and thermogravimetric analyses. The dye-removing ability of these adsorbents was determined by the batch contact adsorption procedure. Effects such as pH value and adsorbent dosage on the adsorption capacities were studied. Four kinetic models were applied. The adsorption was best fitted to Avrami fractional-order kinetic model for the three hybrid material samples. The kinetic data were also adjusted to an intra-particle diffusion model resulting three linear regions, indicating that the adsorption kinetics follows multiple sorption rates. The equilibrium data were fitted to Langmuir, Freundlich and Liu isotherm models. The maximum adsorption capacities were 165.4, 190.3 and 195.9 mg g(-1) for Py/Si-90, Py/Si-92 and Py/Si-94, respectively. Simulated dye-house effluents were used to check the applicability of the proposed adsorbents for effluent treatment. Dye loaded adsorbents were regenerated (>98.2%) by using 0.4 mol L(-1) of NaOH solution as an eluent.     

几种聚合物改性硅胶对苯胺的吸附性能研究

研究了聚乙烯基吡啶改性硅胶(PVP/SiO2)、聚苯乙烯改性硅胶(PS/SiO2)、胺化聚苯乙烯改性硅胶(PS-NH2/SiO2)等3种有机-无机复合材料吸附剂对苯胺的吸附行为。吸附动力学研究表明,3种吸附剂对苯胺的吸附均符合准二级动力学方程。对其粒内扩散模型模拟的结果表明,在3种吸附过程中液膜扩散为主要速率控制步骤。用Langmuir等温吸附方程式和Freundlich等温吸附方程式对其吸附等温线进行了拟合,结果表明,PVP/SiO2、PS/SiO2对苯胺的吸附符合Freundlich等温吸附方程式。     

Influence of mesoporosity on the sorption of 2,4-dichlorophenoxyacetic acid onto alumina and silica

Two SiO2 and three Al2O3 adsorbents with varying degrees of mesoporosity (pore diameter 2-50 nm) were reacted with 2,4-dichlorophenoxyacetic acid (2,4-D) at pH 6 to investigate the effects of intraparticle mesopores on adsorption/desorption. Anionic 2,4-D did not adsorb onto either SiO2 solid, presumably because of electrostatic repulsion, but it did adsorb onto positively charged Al2O3 adsorbents, resulting in concave isotherms. The Al2O3 adsorbent of highest mesoporosity consistently adsorbed more 2,4-D per unit surface area than did the nonporous and less mesoporous Al2O3 adsorbents over a range of initial 2,4-D solution concentrations (0.025-2.5 mM) and reaction times (30 min-55 d). Differences in adsorption efficiency were observed despite equivalent surface site densities on the three Al2O3 adsorbents. Hysteresis between the adsorption/desorption isotherms was not observed, indicating that adsorption is reversible. Attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy studies confirm that 2,4-D adsorption does not occur via ligand exchange, but rather via electrostatic interaction. The results indicate that adsorbent intraparticle mesopores can result in consistently greater 2,4-D adsorption, but the amount adsorbed is dependent upon surface charge and the presence of adsorbent mesoporosity. The data also suggest that when mineral pores are significantly larger than the adsorbate, they do not contribute to diffusion-limited adsorption/desorption hysteresis. Adsorbent transformations through time are discussed.     

Purification of an oligonucleotide at high column loading by high affinity, low-molecular-mass displacers

New urea-functionalized silica stationary phases were prepared by a single-step surface modification through reaction of LiChrosorb Si100 (5 microm particle size) with a homologous series of alkoxysilanes, synthesized in our laboratory, with the general formula (CH3CH2O)3Si(CH2)3NHC(O)NH(CH2)nCH3, where n=4, 6 and 11. The modified silicas were characterized by elemental analysis of carbon and nitrogen, solid-state 29Si- and 13C-cross polarization magic angle spinning nuclear magnetic resonance and nitrogen adsorption isotherms at 77 K. Chromatographic evaluation of the three urea-functionalized silicas in 150x3.9 mm I.D. HPLC columns was carried out by the separation of a test mixture composed of uracil, acetophenone, benzene, toluene and naphthalene, using acetonitrile-water as mobile phase. These new stationary phases, with embedded polar urea groups, are very promising when compared with amide phases prepared by the conventional two-step modification process. A single-step reaction process silica modification is better for obtaining a well-characterized and homogeneous modified surface.     

Thioether-functionalized mesoporous fiber membranes: sol-gel combined electrospun fabrication and their applications for Hg2+ removal

Mesoporous polyvinylpyrrolidone (PVP)/SiO(2) composite nanofiber membranes functionalized with thioether groups have been fabricated by a combination method of sol-gel process and electrospinning. The precursor sol was synthesized by one-step co-condensation of tetraethyl orthosilicate (TEOS) and 1,4-bis(triethoxysilyl)propane tetrasulfide (BTESPTS, (CH(3)CH(2)O)(3)Si(CH(2))(3)S-S-S-S(CH(2))(3)Si-(OCH(2)CH(3))(3)), with the triblock copolymer poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (P123, EO(20)PO(70)EO(20)) as template. After the addition of PVP, nanofiber membranes were prepared by electrospinning. The membranes were characterized by scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM) images, X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), N(2) adsorption-desorption isotherms, and an Elementar Vario EL analyzer. The composites were used as highly selective adsorbents for Hg(2+) due to the modification with thioether groups (-S-), and were conveniently separated from the waste water. The composite could be regenerated through acidification.     

Rational design of original materials for the electrocatalytic hydrogenation reactions: concept, preparation, characterization, and theoretical analysis

Original and versatile new materials for the electrocatalytic hydrogenation of organic compounds were designed. The materials consist of reticulated glassy carbon cathode electrodes in which the modified silica particles (average diameter 40-63 microm) were dynamically circulated. The modification of the silica surface is 2-fold. First, the silica is surface-modified using organic functions such as -OSi(CH3)2(CH2)3OCH2CH-(OH)(CH)2OH (SiO2-Diol), -OSi(CH3)2(CH2)7CH3 (SiO2-C8), and -OSi(CH3)2C6H5 (SiO2-Phenyl). Second, these silica particles were further modified by vapor phase deposition of nickel nanoaggregates (used as sites for hydrogen atoms and electric contacts with the electrode material), which does not destroy or alter the organic functionalization as demonstrated by thermogravimetric analysis-mass spectrometry and Raman, diffuse reflectance IR Fourier transform, and Auger electron spectroscopies. The new concept stems from relative adsorption and desorption properties of the organic molecules and their corresponding reduced products into the organic functionalization of the surface-modified silica. In this work, the electrocatalytic hydrogenation cyclohexanone was used to test the concept. The performances (amount of cyclohexanol vs time of generated electrolysis at constant current) are measured and compared for the various bonded organic functions of the silica surface listed above, along with the unmodified silica particles (but still containing nickel nanoaggregates) and the presence or absence of methanol in solution. The measurements of the adsorption isotherms of cyclohexanone, and the calculations of the interaction energies (MM3 force field) between the chemisorbed organic functions and the substrates, corroborate perfectly the electrocatalysis results.     

Synthesis, characterization and propane metathesis activity of a tantalum-hydride prepared on high surface area "silica supported zirconium hydroxide"

A new tantalum-hydride supported on zirconium hydroxide [(triple bond SiO)(2)Zr(H)-O-Ta(H)(x)-(OSi triple bond)] (x = 1 or 3) was prepared using surface organometallic chemistry and its catalytic properties in the propane metathesis reaction were assessed showing improved activity and selectivities in comparison to the tantalum-hydride supported on silica.     

Interaction of amphetamine and its N-alkyl-substituted derivatives with micro- and mesoporous adsorbents in polar liquids

The process of concentrating amphetamine (1-phenyl-2-propanamine, C6H5CH2CH(NH2)CH3) and its N-alkyl substituted derivatives C6H5CH2CH(NHR)CH3 and C6H5CH2CH(N(CH3)R)CH3 (R=(CH2)(n)CH3 at n=0, 1, 2, and 3) from diluted aqueous solution was investigated using six adsorbents having different textures and chemical compositions. Three chemically modified carbon adsorbents prepared from plum stones and routinely used SPE cartridges packed with graphitized adsorbents such as Hypercarb and Envicarb and polymeric LiChrolut EN were applied. Recovery rates of amphetamines increase nearly linearly with growing free energy of solvation due to better adsorption of amphetamines with larger side groups from polar solution. Reduction of a carbon surface leads to a decrease in the recovery rate. Its minimal values are observed for the adsorption of amphetamines on graphitized carbons due to both lower adsorption and worse desorption (elution) in comparison with those for activated carbons.     

An Infrared Study of the Amine-Catalyzed Reaction of Methoxymethylsilanes with Silica

A thin film infrared technique was used to investigate the reaction of methoxysilanes and amines with the silica surface. The low-frequency region contains bands due to Si-O-Si modes that are used to distinguish between hydrogen-bonded and chemisorbed species. It is shown that the competitive adsorption of amines and CH(3)OSi(CH(3))(3) differs from the results obtained using (CH(3)O)(2)Si(CH(3))(2) or (CH(3)O)(3)SiCH(3). The monomethoxysilane does not displace preadsorbed triethylamine whereas the triethylamine is displaced from the surface by both (CH(3)O)(2)Si(CH(3))(2) and (CH(3)O)(3)SiCH(3). In the reverse sequence, the triethylamine displaces all three methoxysilanes on the surface. When 1:1 mixtures of methoxysilanes and triethylamine (or propylamine) are co-added to silica, the amine preferentially adsorbs and is only displaced by subsequent chemisorption of the silane. The implication of these results for using a two-step amine-catalyzed reaction of methoxysilanes on silica is discussed. Copyright 2000 Academic Press.     

Siloxane-supported organometallic compounds and their catalytic activities for the hydrosilylation of vinylsilanes and dienes

Two different classes of silicone-modified ligands were prepared: nitrile derivatives, 4'-[3-(organosilyl)propoxy]biphenyl-4-carbonitrile R'3SiC3H6OC6H4C6H4CN (R'3Si- = a: Me3SiOSiMe2-, b: (Me(3)SiO)2SiMe-, c: Me3SiO(Me2SiO)3SiMe2-, d: Me3SiO(Me2SiO)25SiMe2-); and, pyridine derivatives, isonicotinic acid 2-methoxy-4-[3-(organosilyl)propyl]phenyl ester R'3SiC3H6Ph(O)MeOCOC5H4N . Compounds and were bound to Pd and Pt using ligand substitution reactions with organometallic precursors to give (R3SiC3H6OC6H4C6H4CN)2PdCl2, (R3SiC3H6OC6H4C6H4CN)2PtCl2 and (R3SiC3H6C6H3(OMe)OC(O)C5H4N)PtCl2(eta(2)-1-octene). The polydimethylsiloxane (PDMS)-supported Pt and Pd compounds and had excellent solubility in both organic solvents and polysiloxanes. All the Pt compounds exhibited good catalytic activity for hydrosilylation of vinylsilanes. The PDMS-supported Pd compound also was effective catalyst for hydrosilylation of a diene, isoprene, with 1,1,1,3,3-pentamethyldisiloxane MM(H) to produce the 1,4-adduct Me3SiOSiMe2CH2CH=CMeCH2-H as a major product.     

An advanced partitioning process for key elements separation from high level liquid waste

To separate MA(Am,Cm) and some fission product elements(FPs) such as Tc,Pd,Cs and Sr from high level liquid waste(HLLW) systematically,we have been studying an advanced aqueous partitioning process,which uses selective adsorption as the separation method.For this process,we prepared several novel adsorbents which were immobilized in a porous silica/polymer composite support(SiO 2-P).Adsorption and separation behavior of various elements was studied experimentally in detail.Small scale separation tests using simulated HLLW solutions were carried out.Pd(II) was strongly adsorbed by the AR-01 anion exchanger and effectively eluted off by using thiourea.Successful separation of Pd(II) from simulated HLLW was achieved.Tc(VII) also exhibited strong adsorption on AR-01 and could be eluted off by using U(IV) as a reductive eluent.Am(III) presented significantly high adsorbability and selectivity onto R-BTP/SiO 2-P adsorbents over various FPs including Ln(III).The R-BTP adsorbents were fairly stable in 3 M HNO 3,but instable against-irradiation-3M HNO 3.An advanced partitioning process consisting of three separation columns for the target elements separation from HLLW was proposed and the obtained experiment results indicated that the proposed process is essentially feasible.     

Synthesis, structure and hydrosilylation activity of neutral and cationic rare-earth metal silanolate complexes

Rare-earth metal alkyl tri(tert-butoxy)silanolate complexes [Ln{mu,eta2-OSi(O(t)Bu)3}(CH2SiMe3)2]2 (Ln = Y (1), Tb (2), Lu (3)) were prepared via protonolysis of the appropriate tris(alkyl) complex [Ln(CH2SiMe3)3(thf)2] with tri(tert-butoxy)silanol in pentane. Crystal structure analysis revealed a dinuclear structure for with square pyramidal geometry at the yttrium centre. The silanolate ligand coordinates in an eta2-bridging coordination mode giving a 4-rung truncated ladder and non-crystallographic inversion centre. Addition of two equiv. of 12-crown-4 to a pentane solution of 1 or 3 respectively gave [Ln{OSi(O(t)Bu)(3)}(CH2SiMe3)2(12-crown-4)].12-crown-4 (Ln = Y (4), Lu (5)). Crystal structure analysis of 5 showed a slightly distorted octahedral geometry at the lutetium centre. The silanolate ligand adopts an eta(1)-terminal coordination mode, whilst the crown ether unit coordinates in an unusual kappa3-fashion. Reaction of 1-3 with [NEt3H]+[BPh4]- in thf yielded the cationic derivatives [Ln{OSi(O(t)Bu)3}(CH2SiMe3)(thf)4]+[BPh4]- (Ln = Y (6), Tb (7) and Lu (8)); coordination of crown ether led to compounds of the form [Ln{OSi(O(t)Bu)3}(CH2SiMe3)(L)(thf)n]+[BPh4]- (Ln = Y, Lu, L = 12-crown-4, n = 1 (9,10); Ln = Y, Lu, L = 15-crown-5, n = 0 (11,12)). Reaction of 1 with [NMe2PhH]+[B(C6F5)4]-, [Al(CH2SiMe3)3] or BPh3 in thf gave the ion pairs [Y{OSi(O(t)Bu)3}(CH2SiMe3)(thf)4]+[A]- ([A]- = [B(C6F5)4]- (13), [Al(CH2SiMe3)4]- (14), [BPh3(CH2SiMe3)]- (15)), whilst two equiv. [NMe2PhH]+[BPh4]- with 1 in thf produced the dicationic ion triple [Y{OSi(O(t)Bu)3}(thf)6]2+[BPh4]-2 (16). Crystal structure analysis revealed that 16 is mononuclear with pentagonal bipyramidal geometry at the yttrium centre. The silanolate ligand coordinates in an eta(1)-terminal fashion. All diamagnetic compounds have been characterized by NMR spectroscopy. 1, 3, 4, 6 and 13 were tested as olefin hydrosilylation pre-catalysts with a variety of substrates; 1 was found to be highly active in 1-decene hydrosilylation.     

Detailed structural investigation of the grafting of [Ta(=CHtBu)(CH2tBu)3] and [Cp*TaMe4] on silica partially dehydroxylated at 700 degrees C and the activity of the grafted complexes toward alkane metathesis

The reaction of [Ta(=CHtBu)(CH2tBu)3] or [Cp*Ta(CH3)4] with a silica partially dehydroxylated at 700 degrees C gives the corresponding monosiloxy surface complexes [([triple bond]SiO)Ta(=CHtBu)(CH2tBu)2] and [([triple bond]SiO)Ta(CH3)3Cp*] by eliminating a sigma-bonded ligand as the corresponding alkane (H-CH2tBu or H-CH3). EXAFS data show that an adjacent siloxane bridge of the surface plays the role of an extra surface ligand, which most likely stabilizes these complexes as in [([triple bond]SiO)Ta(=CHtBu)(CH2tBu)2([triple bond]SiOSi[triple bond])] (1a') and [([triple bond]SiO)Ta(CH3)3Cp*([triple bond]SiOSi[triple bond])] (2a'). In the case of [(SiO)Ta(=CHtBu)(CH2tBu)2([triple bond]SiOSi[triple bond])], the structure is further stabilized by an additional interaction: a C-H agostic bond as evidenced by the small J coupling constant for the carbenic C-H (JC-H = 80 Hz), which was measured by J-resolved 2D solid-state NMR spectroscopy. The product selectivity in propane metathesis in the presence of [([triple bond]SiO)Ta(=CHtBu)(CH2tBu)2([triple bond]SiOSi[triple bond])] (1a') as a catalyst precursor and the inactivity of the surface complex [([triple bond]SiO)Ta(CH3)3Cp*([triple bond]SiOSi[triple bond])] (2a') show that the active site is required to be highly electrophilic and probably involves a metallacyclobutane intermediate.     

Structural and energetic properties of carbosils hydrothermally treated in the classical autoclave or the microwave reactor

Carbon/silica adsorbents (carbosils) prepared by pyrolysis of CH₂Cl₂ at 823 K and the reaction time from 0.5 to 6 h on the mesoporous silica gel surface (Si-60, Merck, granule size 0.2–0.5 mm) and then hydrothermally treated at 473 K with steam or liquid water by using the classical autoclave with traditional heating way or in the microwave reactor were studied by means of TG, adsorption and Q-TG methods. Changes in the structural characteristics of hybrid adsorbents before and after hydrothermal treatment were analyzed on the basis of nitrogen adsorption. Thermal properties of initial and modified samples as well as concentration of carbon deposit were studied using thermogravimetry (TG) in the range of 293–1273 K. The adsorbed water layers were investigated by means of thermodesorption of water under the quasi-isothermal conditions (Q-TG) in the range of 293–573 K. Concentration of weakly and strongly adsorbed water and the surface free energy on the interphase of adsorbent/water were calculated. It was stated that hydrothermal treatment in the microwave reactor, contrary to that in the classical autoclave, allows to obtain adsorbents with noticeably higher values of total pore volume in relation to the initial adsorbents and in majority with a higher specific surface area. Application of microwave energy allows to obtain adsorbents with lower values of surface free energy in relation to the initial adsorbents and those modified in the autoclave.     

硅烷化活性炭的表面性质

测定了活性炭经三甲基氯硅烷蒸气处理后比表面、比孔容、平均孔径等的变化;研究了硅烷化炭表面的润湿性质和吸附性质.结果表明,随活性炭与三甲基氯硅烷反应时间的延长,其比表面和比孔容急剧减小,而孔径分布和平均孔径无明显变化;硅烷化后炭表面的疏水性明显增强;硅烷化炭自水中对正丁醇的吸附量增大.     

Modifying the reactivity in the homologation of propane by introducing aryloxide ligands on a silica supported zirconium alkyl system

Grafting the well-defined molecular complexes [(ArO)Zr(CH2tBu)3], , and [(ArO)2Zr(CH2tBu)2], , on SiO2-(700) (ArO=2,6-Ph2C6H3O) gives the corresponding monosiloxy surface complexes [([TRIPLE BOND]SiO)Zr(CH2tBu)2(OAr)] and [([TRIPLE BOND]SiO)Zr(CH2tBu)(OAr)2] as major surface species as evidenced by mass balance analysis, IR and NMR spectroscopies. In both cases, minor cyclometallated species (ca. 20%) are also probably formed during the grafting process. While /SiO2-(700) catalytically transforms propane into its lower and higher homologues, /SiO2-(700) remains inactive. Moreover, the formation of butane as the major higher homologues is consistent with the formation of metallocarbene intermediates in this system in contrast to what was observed for the corresponding homologation reaction on silica supported zirconium hydrides.