α—甲基丙烯酸2,3—环氧丙基酯的选择性阴离子聚合

通过对α－甲基丙烯酸２，３－环氧丙基酯双键的选择性阴离子聚合的研究发现：在较低下（＜－４０℃）聚合中的副反应主要发生在引发阶段，以引发剂与单体中环氧基的副反应为主；当温度较高时（＞－２０℃）则易出现交现象而难以进行双键的选择性聚合，ＧＰＣ、ＨＮＭＲ及ＦＴＩＲ鉴定表明，在较低温度下１，１＇－二苯基己基锂作引发剂可合成每个重复单元上均定量带有的环氧基的单分散（Ｍｗ／Ｍｎ＜１．１０）官能性聚合物，该聚合     

x－甲基丙烯酸2，3－环氧丙基酯与α－甲基丙烯酸甲酯嵌段共聚物的合成与鉴定

α－甲基丙烯酸２，３－环氧丙基酯与■－甲基丙烯酸甲酯嵌段共聚物的合成与鉴定张洪敏侯元雪程■（北京化工大学高分子系北京１０００２９）关键词■－甲基丙烯酸２，３－环氧丙基酯，甲基丙烯酸甲酯，嵌段共聚物■－甲基丙烯酸２，３－环氧丙基酯（ＥＰＭＡ）含有两个可...     

α－甲基丙烯酸烯丙酯的合成及其自由基、阴离子聚合的研究

合成了α－甲基丙烯酸烯丙酯（ＡＭＡ），并对其自由基、阴离子聚合进行了探讨。结果发现，该单体难以进行选择性自由基聚合，但可用作多种单体自由基聚合的交联剂。用１，１′－二苯基己基锂在ＴＨＦ中引发ＡＭＡ，可顺利地进行α位双键的选择性阴离子聚合，分子量实测值与计算值基本一致。在较低温度下（≤－６０℃），可得窄分布ＰＡＭＡ（Ｍｗ／Ｍｎ＝１．１２～１．１５）。随聚合温度升高，间同和无规聚合物含量分别呈下降和上升趋势。ＧＰＣ、１ＨＮＭＲ及ＦＴＩＲ鉴定表明，用阴离子聚合法可得到溶于多种溶剂、每个重复单元上均定量带有烯丙基双键的窄分布官能性ＰＡＭＡ。     

α—甲基丙烯酸2，3—环氧丙基酯α—甲基丙烯酸甲酯嵌段共聚物的合成与鉴定

α－甲基丙烯酸2，3－环氧丙基酯（EPMA）含有两个可进行阴离子聚合的基团，即α位C＝C双键和酯基上的环氧基。控制适当的聚合条件可使α位双键选择性地进行阴离子聚合而一步合成每个重复单元上均带有环氧基团的窄分布（Mw^-/Mn^-≤1.10)PEPMA^[1]。本研究进一步探讨反应时间对聚合反应过程、温度对聚合物立构规整性的影响，并通过改进单体的精制方法，试图合成单分散Mw^-/Mn^-≤1．05）官能性PEPMA。同时，通过与α－甲基丙烯酸甲酯（MMA）的阴离子共聚，对单体的聚合顺序、共聚物组成比、分子量及分子量分布等进行探讨，并对所得聚合物进行表征。     

采用阴离子、基团转移及自由基聚合方法合成旋光性聚甲基丙烯酸薄荷酯

近年来, 旋光性高分子的广泛应用及其特有的功能已引起了广泛关注, 尤其在手性记忆功能材料[1～3]、液晶及手性催化等方面[4～6]皆表现出良好的应用前景. 用旋光性单体合成旋光性聚合物是最常用的方法之一. 早在20世纪70年代, 就有关于聚甲基丙烯酸薄荷酯(PMnMA)的研究[7], 但有关配体参与的阴离子聚合, 基团转移聚合(GTP)及其立构规整性的研究还未见报道.     

通过自缩合乙烯基氧阴离子聚合制备超支化聚甲基丙烯酸羟丙酯

由甲基丙烯酸羟丙酯通过自缩合乙烯基氧阴离子聚合(self-condensing vinyl oxyanionic polymerization)制备了端羟基的超支化聚甲基丙烯酸酯. 以氢化钾(KH)和冠醚的复合物为引发剂时, 可以得到高分子量的聚合物. 用¹H NMR和¹³C NMR谱图证实了聚合物的超支化结构. 由于在聚合过程中存在质子转移反应, 引发剂与单体的摩尔比会影响所得聚合物的结构. 超支化聚合物的玻璃化转变温度在58.1～81.4 ℃之间, 且随着引发剂与单体的比例的减小而降低. 当引发剂与单体等摩尔比时, 所得聚合物的支化度为0.49.     

含胺基功能性单体的聚合研究——Ⅺ.甲基丙烯酸-2-羟基-3-吗啉基丙酯的合成及其聚合

<正> 一些含有吗啉基的高聚物,作为含脂肪叔胺基的医用高分子材料而被瞩目。我们曾报道了N-(N′-次甲基吗啉)取代丙烯酰胺的合成,及其在过氧化二月桂酰引发下的聚合动力学。它的聚合规律和我们以往所报道的含脂肪叔胺基单体的聚合一样。本文合成了在同—分子中既含吗啉基,又含有羟基的丙烯酸脂,即甲基丙烯酸-2-羟基-3-吗啉基丙酯(HMPMA),研究了在过氧化二月桂酰(LPO)引发下的热聚合,以及在芳香酮作增感剂下的光聚合。关于HMPMA的合成,虽有所报道,但关于其表征,在过氧化     

2－甲基－2－甲氧基羰基－5－次甲基－1，3－二氧环戊－4－酮的合成和阴离子聚合

本文报导了一种环状新单体，２－甲基－２－甲氧基羰基－５－次甲基－１，３－二氧环戊－４－酮的合成，并用红外、核磁及元素分析对单体和中间体的结构进行了鉴定．在－７０℃及干燥氮气保护下，用９－芴锂作阴离子５：发剂对此新单体进行了阴离子开环聚合反应的研究．聚合物的红外和核磁谱图表明：在聚合物中存在两种结构单元，这说明在聚合过程中同时存在开环和不开环的两种情况。虽然在聚合物中，这两种结构单元的量应取决于两种相应的碳阴离子的相对稳定性，但是开环聚合在热力学上是有利的，因为开环的结果形成了更稳定的羰基．用粘度法测定了聚合物的特性粘数。     

3-(2′-乙氧基乙氧基)丙基锂的合成

3-(2′-乙氧基乙氧基)丙基锂的合成;阴离子聚合引发剂;(乙氧乙氧基)丙基锂;高真空反应器     

溶胶-凝胶法合成聚(甲基丙烯酸乙酯-甲基丙烯酸环氧丙酯)/SiO_2杂化聚合物材料

通过溶胶 凝胶过程合成了一系列存在相间偶联键的杂化聚合物材料 .IR分析证实了在无机组份与有机组份间存在碳氮键 ,其特征吸收峰在 1 2 5 0cm-1.DSC的测试结果则表明无机组份含量的增加提高了材料的Tg 值 ,从而提高了杂化材料的使用温度 .利用小角X ray散射 (SAXS)和电镜 (TEM)分析了不同无机组份、不同酸度下体系的形态结构 ,结果表明当无机组份与有机组份的摩尔比为 1∶1且体系的酸度适当时相容性最好 .     

Synthesis of Block Copolymers of 2‐Ethylhexyl Methacrylate,n‐Hexyl Methacrylate and Methyl Methacrylate via Anionic Polymerization at Ambient Temperature

It still remains a concern to break through the bottlenecks of anionic polymerization of polar monomers, such as side reactions, low conversion and low temperature (–78°C). In this work, potassium tert‐butoxide (t‐BuOK) was chosen to initiate the anionic polymerization of 2‐ethylhexyl methacrylate (EHMA) in tetrahydrofuran. The conversions were above 99% at 0 or 30°C, and above 95% at 60°C without side reaction inhibitors. The high conversions implied t‐BuOK could suppress the side reactions. A series of block copolymers of EHMA, n‐hexyl methacrylate (HMA) and methyl methacrylate (MMA) were further synthesized at 0°C, and the conversions were all above 99%. The GPC and ¹H NMR results confirmed the successful synthesis of the block copolymers. The molecular size of monomer and the state of t‐BuOK (free ion pairs or aggregates) remarkably affected the polymerization rates and the molecular structures of the products. The DMA results indicated that the glass transition temperatures of PEHMA or PHMA block and PMMA block were 20°C and 60°C, respectively, which deviated from –2°C and 105°C of homopolymer, respectively, due to the partial compatibility of the blocks. This work explored a route of the anionic polymerization of polar monomers at room temperature.     

苯氧铜/正丁基锂体系引发MMA负离子聚合及其活性特征的研究

采用苯氧铜/正丁基锂(PhOCu/n-BuLi)体系引发MMA聚合, 通过GPC, ¹H NMR对聚合物进行了表征. 实验结果表明, 该体系聚合反应速度较快, 温度、引发体系组成是影响聚合物分子量及其分布、单体转化率、引发剂引发效率、聚合物的立构规整性的主要因素; －40 ℃时分子量分布比较窄, 但引发效率也比较低(大约15%). 低引发效率、宽分子量分布与引发剂的聚集状态有关. 分子量与单体浓度、引发剂浓度的关系说明, 该体系具有一定程度的活性聚合特点.     

Synthesis of Styrenic‐Terminated Methacrylate Macromonomers by Nitroanion‐Initiated Living Anionic Polymerization

N‐Isopropyl‐4‐vinylbenzylamine (PVBA) was synthesized and used as an initiator for the polymerization of methacrylates to synthesize macromonomers with terminal styrenic moieties. LiPVBA initiated a living polymerization and block copolymerization of methyl methacrylate, 2‐(N,N‐dimethylamino)ethyl methacrylate and tert‐butyl methacrylate and produced polymers having well‐controlled molecular weights and very low polydispersities (M̄_w/M̄_n < 1.1) in quantitative yield. ¹H NMR analysis revealed that the polymers contained terminal 4‐vinylbenzyl groups. The macromonomers were reactive in the copolymerization with styrene.     

甲基丙烯酸甲酯和长链烷基酯的嵌段共聚

甲基丙烯酸甲酯和长链烷基酯的嵌段共聚戴李宗＊邹友思郭金泉潘容华（厦门大学化学系厦门３６１００５）关键词阴离子聚合，甲基丙烯酸酯，嵌段共聚合，表征１９９６－０８－０７收稿，１９９６－１１－１８修回国家自然科学基金资助项目嵌段共聚合能得到具微相体系的共聚...     

Asymmetric Polymerization of Menthyl Methacrylate by Anionic Catalysts

In this paper,(-) menthyl methacrylate(-) MnMA) was polymerized at -78℃ in toluene with three types of anionic catalysts, which were complexes of fluorenyllithium with (-) sparteine-((-)-Sp),(S,S)-( )-2,3-dimethoxy-1,4-bis(dimethylamino) butane( )DDB) and N,N,N,N′-tetra-methylethylenediamine(TMEDA), and the chiral optical property of the obtained polymer was studied. The circular dichroism (CD) spectrum of the polymer showed negative Cotton effect.     

New Perspectives in Living/Controlled Anionic Polymerization

Summary: Control of the reactivity and selectivity of active species remains a major challenge in the course of living/controlled polymerizations of vinyl and heterocyclic monomers. We have found that alkyl metal derivatives such as dialkylmagnesium or trialkylaluminum derivatives or the corresponding alkoxyakyl metal derivatives, when added to conventional anionic polymerization systems, are very effective mediators for the controlled anionic polymerization of both styrenic and oxirane monomers. When used as additives to alkali metal alkyl initiators (alkyl lithium, alkyl sodium) for the styrene anionic polymerizations, they strongly retard the reactivity of the propagating species and allow controlling the polymerization in very unusual conditions (bulk, very high temperature). On the contrary, when used in combination to the same alkali metal based initiators for the anionic polymerization of ethylene oxide or propylene oxide, these additives can drastically enhance the reactivity and the selectivity of the propagating species allowing a fast living-like polymerization to proceed already at low temperature in hydrocarbon media.     

Polymerization of Methyl Methacrylate Initiated with Organomanganate Reagents

Organomanganate reagents [R₃Mn]^–Li⁺ (R = Bu, Me) were found to polymerize methyl methacrylate in the presence of potassium tert‐butylate. A conversion of the tacticity of the resulting poly(methyl methacrylate)s from heterotactic (mr = 54%) to isotactic (mm = 58%) was observed upon changing the R group of the initiator from Bu to Me. The addition of triisobutylaluminium was found to efficiently control M̄_w and M̄_w/M̄_n of the resulting polymers.     

Monomer Sequencing in Living Anionic Polymerization Using Kinetic Control

Alternating copolymers containing diphenylethylene (DPE) or diphenylethylene derivatives were prepared by living anionic polymerization using kinetic control. Due to steric hindrance DPE cannot homopolymerize. Therefore alternating copolymers can be prepared by ensuring the rate of cross-propagation (k₁₂) of the co-monomer is favoured over the rate of self-propagation (k₁₁). This reactivity ratio (r₁ = k₁₁/k₁₂) can be controlled by many different factors, such as choice of monomer, electron-donating or withdrawing substituents on DPE, choice of solvent, etc. We report our progress on preparing alternating copolymers by varying these factors.     

苯乙烯-甲基丙烯酸甲酯的高温阴离子溶液共聚

以正丁基锂(n-BuLi)为引发剂、四氢呋喃(THF)为极性调节剂,采用具有较大空间位阻和特定电荷环境的P配合物作为抑制剂,在80℃下实现了苯乙烯(St)与甲基丙烯酸甲酯(MMA)的阴离子嵌段共聚.采用GPC、FT-IR、1H-NMR等手段对共聚物的结构及分子量进行了分析.结果表明:共聚物中各链节的分子量与设计分子量接...