O-磷酸-L-丝氨酸及其衍生物的合成

介绍具有重要药理和生物活性的O-磷酸-L-丝氨酸及衍生物的合成. O-磷酸-L-丝氨酸通过部分水解的三氯氧磷与L-丝氨酸反应制得, 并培养得到了其晶体, 利用X射线衍射方法测定了它的晶体结构; 进而合成了O-磷酸-L-丝氨酸钙盐和O-磷酸-L-丝氨酸单(或双)二异丙胺盐. 产物经核磁共振、红外光谱和质谱进行了结构表征.     

(S)-和(R)-普萘洛尔的不对称合成

普萘洛尔是一种临床上广泛使用的β受体阻断剂, 介绍了一种不对称合成(S)-和(R)-普萘洛尔的方法. 以手性Salen-Co^III催化剂水解动力学拆分外消旋环氧氯丙烷得到高光学纯度的(S)-环氧氯丙烷和(R)-3-氯-1,2-丙二醇, 以(S)-环氧氯丙烷为手性原料先水解得(S)-3-氯-1,2-丙二醇, 其与1-萘酚反应得(S)-3-(1-萘基)-丙烷-1,2-二醇, 再与氯化亚砜反应得环状亚硫酸酯, 最后和异丙胺作用得(S)-普萘洛尔, 总收率80.9%, 光学纯度大于99%; 而同样以(S)-环氧氯丙烷为手性原料直接与1-萘酚反应得(2R)-3-(1-萘氧基)-1,2-环氧丙烷, 再与异丙胺作用得(R)-普萘洛尔, 总收率74.5%, 光学纯度大于99%.     

新型手性N,N′-双支套索冠醚的合成及其应用

(S)-苯丙氨醇和原氯乙酸三乙酯作用得到的手性酰胺醇和手性噁唑啉分别与1,7-二氮-12-冠-4反应, 得到了两种手性N,N′-双支套索冠醚N,N′-二[(S)-N-(1-羟甲基-2-苯基乙基)乙酰胺-2]-1,7-二氮-12-冠-4 (1a)和N,N′-二[(S)-4-苄基-噁唑啉-2-亚甲基]-1,7-二氮-12-冠-4 (1b). 前者应用于D/L-肉碱的手性分离; 后者的铜配合物用于重氮醋酸酯对烯烃的不对称环丙烷化反应.     

具有C2对称的氮磷-氧磷配体双噁唑啉磷乙烷的合成及在不对称催化加氢中的应用

利用易得的光学纯N-甲基氨基醇与1,2-双(二氯磷)乙烷缩合合成了一类新的具有C₂对称轴的氮磷-氧磷配体(R,R)-双噁唑啉磷乙烷(BOAPE) 1～4. 该类配体不仅具有C₂对称结构和刚性五元环, 还具有富电子特性, 利用500 MHz进行了¹H NMR, ³¹P NMR, ¹³C NMR表征. 与这些配体配位形成的Rh配合物用于N-苯甲酰基脱氢丙氨酸衍生物和α-功能化酮不对称加氢, 分别可以得到99%和98%的ee. 这类配体比它们相对应的非C₂对称的氮磷-氧磷化合物(AMPP)配体具有更高的对映选择性. 在这四个新的配体中配体(R,R)-Ph-BOAPE (2)的催化性能最优. 催化剂[Rh(COD)(R,R)-Ph-BOAPE]BF₄的半反应周期t_1/2和周转频率(TOF)在N-苯甲酰基肉桂酸甲酯的不对称加氢反应中分别为12 min和6.5 min^－1.     

(S)-N-Boc-α-氨基庚(辛)二酸单酯和双酯的制备

以(S)-N-Boc焦谷氨酸乙酯为原料, 经DIBAL-H还原得到半缩醛, 然后经Wittig反应得到相应的烯烃, 最后氢化制得(S)-N-Boc-α-氨基庚二酸二(单)酯, 总收率为85.1%(二酯)和86.1%(单酯). 另外, 以(S)-N-Boc-哌啶-2-甲酸为原料经酯化和氧化得内酰胺, 然后经还原、Wittig反应、氢化得到(S)-N-Boc-α-氨基辛二酸二(单)酯, 总收率为72.5%(二酯)和72.4%(单酯). 产品用¹H NMR, MS表征.     

[1-芳基甲羰基-2-(1,2,4-三唑-1-基)]乙基-N,N-二烷基二硫代氨基甲酸酯衍生物的合成、结构表征及生物活性研究

以芳香基三唑类杀菌剂三唑酮为先导物设计并合成了5个含N,N-二烷基二硫代氨基甲酸酯的芳香三唑类化合物, 通过元素分析、红外光谱、核磁共振氢谱和质谱对其结构进行了表征. 用X射线单晶衍射测定了[α-(4-甲氧基苯甲酰基)-2-(1,2,4-三唑-1-基)]乙基-N,N-二甲基二硫代氨基甲酸酯的晶体结构, 晶体属于三斜晶系, 空间群, 晶胞参数为: a＝0.73482(15) nm, b＝1.1051(2) nm, c＝1.1209(2) nm, α＝90.32(3)°, β＝101.97(3)°, γ＝105.13(3)°, V＝0.8578(3) nm³, Z＝2, D_c＝1.357 g/cm³, F(000)＝368, µ＝0.324 mm^－1. 生物测试结果显示这5种有机化合物都具有杀菌性和植物生长调节活性     

N,N'-二茂铁甲基-(1S,2S)-1,2-二苯基乙二胺的合成及其在烯烃的不对称双羟基化反应中的应用

(1S,2S)-1,2-二苯基乙二胺和甲酰基二茂铁经缩合和还原两步反应, 以90%的产率合成了N,N'-二茂铁甲基-(1S,2S)-1,2-二苯基乙二胺, 并以其为配体催化烯烃的不对称双羟基化反应, 获得了较高的对映选择性(71%～86% ee).     

N-烷基-N-酰基磺酰胺聚苯乙烯基微球作为固相酰化剂的研究

一种可循环使用的固相试剂：N-烷基-N-酰基磺酰胺聚苯乙烯基微球(5), 通过对聚苯乙烯磺酰氯微球树脂进行两步功能基化的修饰反应来制备. 制备过程如下：聚苯磺酰氯树脂(1)与伯胺(2)反应得到聚苯乙烯基N-烷基磺酰胺树脂(3), 树脂3用酰氯(4)或酸酐酰化得到N-烷基-N-酰基磺酰胺聚苯乙烯基树脂(5). 酰化的树脂5作为酰基转移试剂与亲核试剂胺反应得到二级酰胺. 根据5上取代基对酰胺生成的程度的影响结果表明, 烷基R¹和酰基(R²CO)对酰基转移反应活性的大小依次分别为：苯基＞苄基＞甲基＞正丁基＞＞H和对硝基苯甲酰基(苯甲酰基＞乙酰基. 胺的亲核能力对酰胺的收率也有一定的影响. N-苯基-N-苯甲酰基磺酰胺树脂重复使用3次没有发现活性降低.     

N,N-二甲基乙酰胺与醇分子间相互作用的理论研究

采用密度泛函理论在B3LYP/6-311＋G*水平上对乙醇、丙醇、丁醇、戊醇与N,N-二甲基乙酰胺形成的1∶1氢键复合物进行计算研究. 结果表明: 醇与N,N-二甲基乙酰胺形成的复合物存在强的氢键, 表现为羰基氧原子的孤对电子与醇羟基反键σ轨道的相互作用. 振动分析显示, 分子间C＝O…H—O氢键的形成使C＝O和H—O伸缩振动频率明显红移. 溶剂对氢键产生较大的影响, 随着溶剂极性的增加, 复合物氢键有蓝移趋势.     

手性3,5-二甲基-2-芳基-2-吗啉醇盐酸盐的合成及其晶体结构

以(S)-2-氨基丙醇为手性源与α-溴-3-氯苯丙酮反应, (R)-2-氨基丙醇为手性源与6-甲氧基-2-(2-溴丙酰基)萘反应, 分别合成了手性纯化合物(2R,3R,5S)-3,5-二甲基-2-(3-氯苯基)-2-吗啉醇盐酸盐(4a)和(2S,3S,5R)-3,5-二甲基-2-(6-甲氧基-2-萘基)-2-吗啉醇盐酸盐(4b), 利用X射线单晶衍射仪测定了两化合物的晶体结构和两化合物的空间结构, 并初步分析两化合物空间结构, 化合物4a晶体属正交晶系, 空间群为P2₁2₁2, 晶胞参数为: a＝0.8718(2) nm, b＝0.7883(2) nm, c＝2.0247(6) nm, Z＝4, V＝1.3915(7) nm³, D_c＝1.328 g/cm³, F(000)＝584, R₁＝0.0399, wR₂＝0.0797, S＝1.042. 化合物4b晶体属正交晶系, 空间群为P2₁2₁2₁, 晶胞参数为: a＝0.71035 (9) nm, b＝0.77703(10) nm, c＝2.9820(4) nm, Z＝4, V＝1.6318(4) nm³, D_c＝1.318 g/cm³, F(000)＝688, R₁＝0.0520, wR₂＝0.1108, S＝0.994.     

Contributions to the Chemistry of the Binary Compounds of the Transition Elements

Phase and structural relationships of the sulfur, selenium, and tellurium compounds of the 4d and 5d transition elements of groups IV to VII of the periodic system are discussed. Homologous elements behave very similarly with respect to the chalcogens, and this is particularly the case for niobium and tantalum, and for molybdenum and tungsten. However, zirconium, niobium, and molybdenum have a greater tendency towards formation of chalcogen-poor phases than their homologues hafnium, tantalum, and tungsten. Subchalcogenides are known only for zirconium and niobium. The number of phases and the tendency towards formation of solid solutions are considerably smaller among the tellurides than among the sulfides and selenides. The crystal structures of the telluride phases also differ from those of the sulfide and selenide phases of analogous composition. In addition, a review of the phase and structural relationships of the arsenic and antimony compounds of the 4d and 5d transition elements of groups V to VII is given.     

LOW DENSITY POLYETHYLENE/CLAY NANOCOMPOSITES MODIFIED BY ETHYLENE COPOLYMERS： EFFECTS OF FUNCTIONALIZED SEGMENTS ON MORPHOLOGY

Melt extrusion was used to prepare binary nanocomposites of ethylene copolymers and organoclay and trinary nanocomposites of low-density polyethylene （LDPE）, ethylene copolymer and organoclay. X-ray diffraction （XRD） and transmission electron microscopy （TEM） were used to analyze the structure of the clay phase and the morphology of the nanocomposites. Influences of the comonomer in the copolymer and the content of the copolymer on the morphology of the resulting nanocomposites were discussed. The binary and the trinary composites may form intercalated or exfoliated structures depending on the interaction between the copolymer and the clay layers and the content of the copolymer.     

纳米粒子的精准组装

纳米材料由于其独特的光、电、磁、力学等性质,成为了构建功能材料与器件的理想基元。实现纳米粒子的精确组装,是探究粒子之间的耦合聚集性质和制备宏观功能器件的基础。但是由于纳米粒子的小尺寸以及在溶液中运动的随机性与复杂性,精准控制纳米粒子组装体的形貌以及在空间中的相对位置仍存在巨大挑战。为了将纳米粒子组装成理想的有序结构,许多控制粒子组装的策略与方法得到发展。本文首先概述了纳米粒子自组装的控制方法与典型形貌,着重分析了影响粒子精准排布的因素与控制方法,并对纳米粒子及其组装体的光学性质与器件应用的最新研究进展进行了讨论,最后对目前纳米粒子精准组装所面临的挑战以及未来发展的方向进行了展望。     

电流变液中悬浮颗粒的体积与形状的变化

基于偶极近似,运用电极化方法,定量研究了电流变液中悬浮颗粒在外电场作用下其体积和形状的变化,并计算了其体积和形状的相对变化率.研究结果表明:悬浮颗粒的体积和形状的相对变化率均与电场强度的平方成正比,并与ER本身的性质有关.一般情况下,颗粒的体积和形状的相对变化率分别为8.4%和12.5%,对总体积变化率的贡献为1.68%.这种变化对于ER系统的电涨和电热都作出了贡献,仅当将颗粒当作刚性球时,其自由能才与电场强度的平方成正比.     

Spectrophotometric determination of the dissociation constants of crown ethers with grafted acridone unit in methanol based on Benesi-Hildebrand evaluation

As potential chromo- and fluorophores for optical sensors a number of acridone grafted crown ethers containing NO2 group(s) and/or Br or Cl atom(s) in the aromatic rings (compounds) were studied by spectrophotometric method. In the first step of this work the acid-base and complexing properties of these compounds as well as those of the acridone, thioacridone and 4,5-dinitroacridone were investigated. Compounds proved to be very week acids and therefore the conventional spectrophotometric method based on the measurement of the ratio of the protonated/deprotonated forms of the compounds was not applicable for the determination of the dissociation constants (pKa values). Thus, a new spectrophotometric approach was elaborated for the pKa determination of these compounds, which is based on spectrophotometric titration in methanol with strong base and the titration results were evaluated by the Benesi-Hildebrand method. (In the studies with TEAOH, TMAOH and LiOMe, the complex formation between the ionophores and the cations of the bases could be excluded.) As it was expected, the experimentally determined pKa values depended on the nature of the substituents of the acridone moiety and pKa values ranged between 12.6 and 14.9. The lower pKa value of thioacridone compared to the acridone can be explained by the larger size of the sulfur atom. The outstandingly larger pKa value for 4,5-dinitroacridone can be attributed to the formation of intramolecular hydrogen-bonds between the ortho-position nitro group and the NH proton. As a trend, the strong electron withdrawing nitro substituents decreased considerably the pKa values of compounds and compared to that of the halogen (Cl and Br) atoms (for example compounds and) of weaker withdrawing effect.     

3,7-二硝基亚氨基-2,4-二氮杂双环[3,3,0]辛烷的放热分解反应动力学

The kinetic parameters of the exothermic decomposition reaction of the title compound in a temperature-programmed mode have been studied by means of DSC. The DSC data obtained are fitted to the integral, differential and exothermic rate equations by linear least-squares, iterative, combined dichotomous and least-squares methods, respectively. After establishing the most probable general expression of differential and integral mechanism functions by the logical choice method, the corresponding values of the apparent activation energy (Ea), pre-exponential factor (A) and reaction order (n) will be obtained by the exothermic rate equation. The results show that the empirical kinetic model function in differential form and the values of Ea and A of this reaction are (1-α)0.44, 230.4 kJ/mol and 1018.16 s-1, respectively. With the help of the heating rate and obtained kinelic parameters, the kinetic equation of the exothermic decomposition reaction process of the title compound is proposed. The critical temperature of thermal explosion of the compound is 302.6℃. The above-mentioned kinetic parameters are quite useful for analyzing and evaluating the stability and thermal change rule of the title compound.     

PROPERTIES AND MORPHOLOGY OF UNSATURATED POLYESTER/ACRYLATE-TERMINATED POLYURETHANE/ORGANOMONTMORILLONITE NANOCOMPOSITES

Unsaturated polyester resin （UPR）/acrylate-terminated polyurethane （ATPU）/organo-modified montmorillonite （OMMT） nanocomposites were prepared by the in situ intercalative polymerization method. Samples were prepared by the sequential mixing, i.e. mixture of the ATPU and styrene （S） and OMMT were prepared in the first step; UPR was then added to the pre-intercalates of ATPU/S/OMMT. Results indicate that the mechanical properties and thermal properties of UPR/ATPU/OMMT nanocomposites greatly depend on the amount of ATPU and OMMT. Results show that the addition of ATPU could increase the impact strength of UPR/ATPU composites, but the tensile strength, flexural strength and heat resistance of the materials are obviously decreased. When the weight ratio between UPR, ATPU and OMMT were 82：15：3, the impact strength and heat distortion-temperature of nanocomposite were greatly improved, meanwhile there was little change for other properties of the nanocomposites. The synergistic enhancement effects of ATPU and OMMT on the composites were observed. The structures and morphology of the composites were investigated by X-ray diffraction, scanning electron microscopy and transmission electron microscopy.     

Applications of Thermal Analysis and Coupled Techniques in Pharmaceutical Industry

Thermal analysis methods are well-established techniques in research laboratories of pharmaceutical industry. The robustness and sensitivity of instrumentation, the introduction of automation and of reliable software according to the industrial needs widened considerably the areas of applications in the last decade. Calibration of instruments and validation of results follow the state of the art of cGMP as for other analytical techniques. Thermal analysis techniques are especially useful for the study of the behavior of the poly-phasic systems drug substances and excipients and find a unique place for new delivery systems. Since change of temperature and moisture occur by processing and storage, changes of the solid state may have a considerable effect on activity, toxicity and stability of compounds. Current requirements of the International Conference of Harmonisation for the characterization and the quantitation of polymorphism in new entities re-enforce the position of thermal analysis techniques. This challenging task needs the use of complementary methods. Combined techniques and microcalorimetry demonstrate their advantages. This article reviews the current use of thermal analysis and combined techniques in research and development and in production. The advantage of commercially coupled techniques to thermogravimetry is emphasized with some examples. This revised version was published online in August 2006 with corrections to the Cover Date.     

Statistical Theory of Stable and Meta-stable Transition for Crystallization and Fusion of Homopolymers Ⅵ. Statistical Dynamics of Polymeric Crystallization by Molecular Segregation-Dependence of Crystal Growth Rate on the Grown Mechanism and Concentratio

First a short review on the dependence of crystal growth rate on the growth mechanism and concentration is present. Based on the structural model of micronucleus and crystal constituent chains, and the feature of statistical dynamics for polymeric crystallization by molecular segregation, a general method for characterizing number the growth rate and micro crystal constituent chains and the size growth rate for crystals was proposed. According to this method, a set of quantitative expressions for correlating the growth rate in number and size with the four types of growth (folding, extending and combination of folding and extending), the crystalline temperature and the crystalline concentration was derived. Then combined the concentration index is combined with the fraction of conformation for segments, a new correlation of the concentration index to the temperature of crystallization and the flexibility of polymeric chain is theoretically obtained. The dependences of the index on the different types of growth are also studied. Finally the relationships between the growth rate for crystals and the concentration of solution were verified by the experimental validating the predictions made by the theory.