Decarboxylative allylation using sulfones as surrogates of alkanes

Alpha-sulfonyl functional groups are traceless activating groups that facilitate catalytic decarboxylative allylations in high yield yet can be cleaved to allow the synthesis of simple allylated alkanes. Substrate studies suggest that decarboxylation to form an alpha-sulfonyl anion is rate-limiting. Furthermore, the anion is formed regiospecifically under formally neutral conditions.     

Stark effect as a probe of the lowest triplet-state orbital configuration in benzophenone and three derivatives

Stark effects on the phosphorescence origins of benzophenone and three derivatives (4,4′-dibromobenzophenone, 2-benzoylpyridine, and 3-benzoylpyridine) in a single 4,4′-dibromodiphenylether host crystal have been observed using electric field modulation spectroscopy. The magnitude of the effect for each molecule is determined by the vector difference in the dipole moments of the excited state and the ground state. These differences are found to be similar for all four molecules. This result demonstrates that the orbital configuration of the lowest triplet state is the same for each of these compounds and may indicate that the charge redistribution upon excitation is localized on the carbonyl group.     

UV-induced graft polymerization of acrylamide on cellulose by using immobilized benzophenone as a photo-initiator

Photo-active moiety, benzophenone, was incorporated onto cotton fabrics by using butyl tetracarboxylic acids (BTCA). Then, grafting of polyacrylamide on the cotton fabrics was performed by exposing the fabrics to longer UV wavelength irradiation. The chemical structure and thermal properties of the polyacrylamide grafted cotton fabrics were investigated by SEM, FTIR, XRD, and TGA, and the results verified the successful grafting of polyacrylamide on cotton fabrics. Also, it was observed that active chlorine contents were created on the polyacrylamide grafted cotton fabrics through simple chlorination process, and the chlorine treated cotton fabrics showed excellent antibacterial abilities like the powerful cyclic amide halamines.     

Examination of a synthetic benzophenone membrane-targeted antibiotic

The enormous success of antibiotics is seriously threatened by the development of resistance to most of the drugs available on the market. Thus, novel antibiotics are needed that are less prone to bacterial resistance and are directed toward novel biological targets. Antimicrobial peptides (AMPs) have attracted considerable attention due to their unique mode of action and broad spectrum activity. However, these agents suffer from liability to proteases and the high cost of manufacturing has impeded their development. Previously, we have reported on a novel class of benzophenone-based antibiotics and early studies suggested that these agents might target the bacterial membrane. In this study, we present our work on the mechanism of action of these novel membrane targeted antibiotics. These compounds have good affinities to polyanionic components of the cell wall such as lipoteichoic acid (LTA) and lipopolysaccharide (LPS). We found that these agents release potassium ions from treated bacteria; thus, resulting in disruption of the bacterial membrane potential. Benzophenone-based membrane targeted antibiotics (BPMTAs) cause membrane disruption in synthetic lipid vesicles that mimic Gram-positive or Gram-negative bacteria. The compounds display no hemolytic activity up to a concentration that is 100 times the MIC values and they are capable of curing mice of a lethal MRSA infection. Repeated attempts to develop a mutant resistant to these agents has failed. Taken together, BPMTAs represent a promising new class of membrane-targeted antibacterial agents.     

Trimethylsilylethynyl ketones as surrogates for ethynyl ketones in the double Michael reaction

Trimethylsilylethynyl ketones can be desilylated in the presence of a tethered carbon diacid and induced to undergo a double Michael reaction in situ. The trimethylsilylethynyl ketones can serve as surrogates of ethynyl ketones that are difficult to prepare or isolate.     

Use of Cyclodextrin-Cholesterol Complex as a Primary Standard in Cholesterol Analysis

Cholesterol is an analyte commonly measured in various biological fluids. Enzymic procedures have virtually replaced the chemical methods for cholesterol determinations. Standardization of cholesterol assays often involve the use of solutions of this steroid containing organic solvents and/or detergents, or alternatively, the use of secondary standards. The present report shows the preparation of a primary cholesterol standard by its complexation with a chemically modified cyclodextrin. hydroxylpropyl β-cyclodextrin. The use of cyclodextrin for cholesterol solubilization is not deleterious to the enzymes and other constituents present in reagents for cholesterol analysis. Such a standard is biocompatible. stable, and safe and offers an excellent alternative to the utilization of organic solvents or detergents.     

Use of stable isotopes as surrogates for radionuclides for security studies

During the past decade, interest has increased in qualifying and quantifying the threat posed to the public by the illegal use of radionuclides. In order to take investigations beyond the laboratory bench into more realistic scenarios, environmental and safety considerations dictate that these studies be performed on stable and benign surrogates. This paper discusses some of these studies, specifically the use of cerium dioxide for actinide ceramics and calcium and natural strontium ceramics for those based on ⁹⁰Sr.     

Synthesis and characterization of a polymerizable benzophenone derivative and its application in styrenic polymers as UV-stabilizer

In this paper, a polymerizable UV-stabilizer 2-hydroxy-4-(3-methacryloxy-2-hydroxylpropoxy) benzophenone (BPMA) was synthesized by the reaction of 2,4-dihydroxybenzophenone (UV-0) and glycidyl methacrylate (GMA), and characterized by ultraviolet-visible absorption spectroscopy (UV-Vis), Fourier transform infrared spectroscopy (FTIR) and proton nuclear magnetic resonance (¹H NMR). The results show that BPMA, with high UV-absorbing performance, has been synthesized successfully. Poly(St-co-BPMA) was prepared by emulsion copolymerization of styrene (St) and BPMA, and tested by ¹H NMR, UV-Vis, gel permeation chromatography (GPC) and differential scanning calorimeter (DSC). The results reveal that BPMA had been added to the polymer chain as copolymer and the UV-resistant performance of poly(St-co-BPMA) was enhanced significantly by the incorporation of BPMA onto the polymer chains. Poly(St-co-BPMA) was irradiated under UV light and insoluble substance, reduced viscosity, weight loss and UV-Vis absorption spectra were used to determine the degradation of poly(St-co-BPMA). The results show that BPMA is an effective UV-stabilizer in protecting poly(St-co-BPMA) from UV destroys. We also take water extraction test on poly(St-co-BPMA), PSt/UV-0 blends, and the results show that migration problem can be resolved by anchoring the UV-stabilizer onto the polymer chain.     

One-pot synthesis of α-acyloxyaminoamides via nitrones as imine surrogates in the Ugi MCR

α-acyloxyaminoamides can be prepared, with yields ranging from fair to very good (up to 89%), through an Ugi four component reaction by mixing a carbonyl component, a carboxylic acid, an isocyanide and an N-alkylated hydroxylamine in methanol. Preformed nitrones furnish the same final compounds with comparable yields.     

Cumyl ester as the C-terminal protecting group in the enantioselective alkylation of glycine benzophenone imine

Cumyl ester is an optimal C-terminal protecting group for glycine benzophenone imine in asymmetric alkylation reactions catalyzed by Cinchona chiral phase-transfer catalysts. High levels of enantioselectivity have been obtained (up to 94% ee) with this substrate, which provides an attractive alternative to the analogous tert-butyl ester. N-terminal imines and the C-terminal esters can be cleaved from alkylation products by hydrogenolysis, while maintaining acid-labile side chain protecting groups.     

Cholesterol as a functional metabolite cooperates with metadherin in cancer cells

Protein-metabolite interactions (PMIs) play important roles in various biological processes, especially in disease progression. However, due to the complexity of living cells, it is very difficult to identify specific PMIs. Herein, we chose one oncogenic factor, metadherin (MTDH), as a bait to identify its in vivo interacting metabolites in cancer cells. Cholesterol is an important metabolite and essential structural component of cell membranes. It could also drive several diseases including cancer. Interestingly, we found that cholesterol robustly interacted with MTDH and downregulated the expression of MTDH in cancer cells. Furthermore, MTDH disturbed metabolite alterations under cholesterol treatment in MTDH transduced cancer cells. Collectively, our results uncover an undescribed PMI where MTDH, as an oncogenic factor, might positively regulate cancer progression by interacting with cholesterol. This study interprets the theoretical basis of PMI-oriented cancer progression and targeting therapies in clinic.     

Cholesterol Peroxidation as a Special Type of Lipid Oxidation in Photodynamic Systems

Like other unsaturated lipids in cell membranes and lipoproteins, cholesterol (Ch) is susceptible to oxidative modification, including photodynamic oxidation. There is a sustained interest in the pathogenic properties of Ch oxides such as those generated by photooxidation. Singlet oxygen (¹O₂)‐mediated Ch photooxidation (Type II mechanism) gives rise to three hydroperoxide (ChOOH) isomers: 5α‐OOH, 6α‐OOH and 6β‐OOH, the 5α‐OOH yield far exceeding that of the others. 5α‐OOH detection is relatively straightforward and serves as a definitive indicator of ¹O₂ involvement in a reaction, photochemical or otherwise. Like all lipid hydroperoxides (LOOHs), ChOOHs can disrupt membrane or lipoprotein structure/function on their own, but subsequent light‐independent reactions may either intensify or attenuate such effects. Such reactions include (1) one‐electron reduction to redox‐active free radical intermediates, (2) two‐electron reduction to redox‐silent alcohols and (3) translocation to other lipid compartments, where (1) or (2) may take place. In addition to these effects, ChOOHs may act as signaling molecules in reactions that affect cell fates. Although processes a‐c have been well studied for ChOOHs, signaling activity is still poorly understood compared with that of hydrogen peroxide. This review focuses on these various aspects Ch photoperoxidation and its biological consequences.     

Oxoneptunium(v) as part of the framework of a polyoxometalate

(NH4)14Na4[(Np3W4O15)(H2O)3(BiW9O33)3].62H2O (1) and (NH4)14.5Na3.5[(Np3W4O15)(H2O)3(SbW9O33)3].40.5H2O (2) each contain three neptunyl(v) moieties encapsulated within heteropolyoxotungstate frameworks in which axial {NpO2}+ oxygens form one face of a WO6 octahedron.     

Silk Mat as Bio-matrix for the Immobilization of Cholesterol Oxidase

Cholesterol oxidase (ChOx) was covalently immobilized onto the woven silk fiber (silk mat) produced by Antheraea assamensis. The immobilization was done using N-ethyl-N’-(3-dimethylaminopropyl) carbodimide and N-hydroxysuccinimide ligand chemistry. The attachment of ChOx to the silk mat was demonstrated by scanning electron microscopy and activity study. The kinetic studies of the immobilized ChOx were performed by using a biological oxygen monitor. The enzyme loading was found to be 0.046 U cm^?2 of silk mat and the enzyme loading efficiency of the silk mat was estimated to be 70%. Remarkably high storage and operational stability (t_1/2 of initial activities) corresponding to 13 months and 25 numbers of assay (for a period of 6 h), respectively, of the fabricated ChOx electrode were demonstrated.     

Candida zeylanoides as whole-cell biocatalyst to perform asymmetric bioreduction of benzophenone derivatives

Abstract

Candida zeylanoides P1 was investigated as whole cell biocatalyst for the bioreduction of biaryl prochiral ketones into chiral carbinols, which can be used as pharmaceutical intermediate. Bioreduction of different biaryl ketones was carried out to their corresponding chiral biaryl carbinols such as (S)-(4-chlorophenyl) (phenyl) methanol (2a), which can be used in the synthesis of L-cloperastine drug, with antitussive, antiepidemic activity and bronchial musculature relaxant characteristics, in gram scale, enantiopure form (>99%) and excellent yields. The selectivity of C. zeylanoides P1 in enantioselective reduction of biaryl ketones was not affected by the steric and electronic effects of substrates. The current method demonstrates an encouraging green chemistry approach for the production of biaryl secondary chiral alcohols of pharmaceutical importance in mild, inexpensive and environmentally friendly process. The present study has many benefits since this yeast biocatalyst were successfully applied bioreduction of structurally bulky prochiral substrates, which cannot be reducted by chemical catalysis.     

Derivative spectrophotometric analysis of benzophenone (as an impurity) in phenytoin

ABSTRACT: Three simple and rapid spectrophotometric methods were developed for detection and trace determination of benzophenone (the main impurity) in phenytoin bulk powder and pharmaceutical formulations. The first method, zero-crossing first derivative spectrophotometry, depends on measuring the first derivative trough values at 257.6 nm for benzophenone. The second method, zero-crossing third derivative spectrophotometry, depends on measuring the third derivative peak values at 263.2 nm. The third method, ratio first derivative spectrophotometry, depends on measuring the peak amplitudes of the first derivative of the ratio spectra (the spectra of benzophenone divided by the spectrum of 5.0 μg/mL phenytoin solution) at 272 nm. The calibration graphs were linear over the range of 1-10 μg/mL. The detection limits of the first and the third derivative methods were found to be 0.04 μg/mL and 0.11 μg/mL and the quantitation limits were 0.13 μg/mL and 0.34 μg/mL, respectively, while for the ratio derivative method, the detection limit was 0.06 μg/mL and the quantitation limit was 0.18 μg/mL. The proposed methods were applied successfully to the assay of the studied drug in phenytoin bulk powder and certain pharmaceutical preparations. The results were statistically compared to those obtained using a polarographic method and were found to be in good agreement.     

Derivative spectrophotometric analysis of benzophenone (as an impurity) in phenytoin

Background

Biomass and municipal solid waste offer sustainable sources of energy; for example to meet heat and electricity demand in the form of combined cooling, heat and power. Combustion of biomass has a lesser impact than solid fossil fuels (e.g. coal) upon gas pollutant emissions, whilst energy recovery from municipal solid waste is a beneficial component of an integrated, sustainable waste management programme. Concurrent combustion of these fuels using a fluidised bed combustor may be a successful method of overcoming some of the disadvantages of biomass (high fuel supply and distribution costs, combustion characteristics) and characteristics of municipal solid waste (heterogeneous content, conflict with materials recycling). It should be considered that combustion of municipal solid waste may be a financially attractive disposal route if a 'gate fee' value exists for accepting waste for combustion, which will reduce the net cost of utilising relatively more expensive biomass fuels.

Results

Emissions of nitrogen monoxide and sulphur dioxide for combustion of biomass are suppressed after substitution of biomass for municipal solid waste materials as the input fuel mixture. Interactions between these and other pollutants such as hydrogen chloride, nitrous oxide and carbon monoxide indicate complex, competing reactions occur between intermediates of these compounds to determine final resultant emissions.

Conclusions

Fluidised bed concurrent combustion is an appropriate technique to exploit biomass and municipal solid waste resources, without the use of fossil fuels. The addition of municipal solid waste to biomass combustion has the effect of reducing emissions of some gaseous pollutants.     

Detection of 4a,5-dihydropravastatin as Impurity in the Cholesterol Lowering Drug Pravastatin

Dihydro analogues are known byproducts of the fermentative production of statins and cannot be detected with existing pharmacopoeia analysis methods. We detected dihydropravastatin in most commercial formulations of pravastatin with LC-MS, in some cases in levels requiring identification. In fermentation broth samples of the single step production of pravastatin, we detected and identified for the first time 4a,5-dihydropravastatin, and confirmed that after several recrystallization steps this impurity can be fully removed from the pravastatin powder.