Adsorption of poly(vinyl formamide-co-vinyl amine) onto silica particle surfaces and stability of the formed hybrid materials

In order to produce silica/polyelectrolyte hybrid materials the adsorption of the polyelectrolyte poly(vinyl formamide-co-vinyl amine), P(VFA-co-VAm) was investigated. The adsorption of the P(VFA-co-VAm) from an aqueous solution onto silica surface is strongly influenced by the pH value and ionic strength of the aqueous solution, as well as the concentration of polyelectrolyte. The adsorption of the positively charged P(VFA-co-VAm) molecules on the negatively charged silica particles offers a way to control the surface charge properties of the formed hybrid material. Changes in surface charges during the polyelectrolyte adsorption were studied by potentiometric titration and electrokinetic measurements. X-ray photoelectron spectroscopy (XPS) was employed to obtain information about the amount of the adsorbed polyelectrolyte and its chemical structure. The stability of the adsorbed P(VFA-co-VAm) was investigated by extraction experiments and streaming potential measurements. It was shown, that polyelectrolyte layer is instable in an acidic environment. At a low pH value a high number of amino groups are protonated that increases the solubility of the polyelectrolyte chains. The solvatation process is able to overcompensate the attractive electrostatic forces fixing the polyelectrolyte molecules on the substrate material surface. Hence, the polyelectrolyte layer partially undergoes dissolving process.     

Design of silica microparticles with oligopeptide brushes and their interaction with proteins

Synthesis of small oligopeptide brushes (oligo(S-benzyl-l-cysteine)) onto polyelectrolyte functionalized silica microparticles was developed. Poly(vinyl amine) (PVAm) adsorbed from salt-free and KCl 10⁻¹ mol L⁻¹ aqueous solution onto silica microparticles was chemically and naturally cross-linked by epichlorohydrin and CO₂, respectively. After the adsorption of PVAm onto microporous silica particles and stabilization by cross-linking, five repeated coupling reactions of Boc-S-benzyl-l-cysteine were performed. To test the protein interactions with the newly designed surface, human serum albumin (HSA) has been selected as a model protein. X-ray photoelectron spectroscopy, total organic carbon, potentiometric and polyelectrolyte titrations, and electrokinetic analysis were employed to obtain information about the polyelectrolyte adsorption and the amount of the amino acid S-benzyl-l-cysteine that was covalently bound to the solid surface and for determination of the protein amount adsorbed onto functionalized surface. The amount of HSA adsorbed onto modified silica microparticles decreased in order: silica/PVAm-cross-linked (silica/PVAm-C) (8.00 mg g⁻¹) > silica/PVAm-C/S-benzyl-l-cysteine (6.34 mg g⁻¹) > silica (4.86 mg g⁻¹) > silica/PVAm-C/(S-benzyl-l-cysteine)₅ (1.86 mg g⁻¹).     

Functionalization of silica particles towards cationic polyelectrolytes using vinylformamide and 1,3‐divinylimidazolidin‐2‐one as monomers

The use of vinylformamide and 1,3‐divinylimidazolidin‐2‐one, bisvinylethylene‐urea (BVU), as well as of the poly(vinylformamide‐vinylamine) copolymer (PVFA‐co‐PVAm) for silica surface functionalization has been investigated. Various procedures such as grafting from, crosslinking surface polymerization, and post‐functionalization of adsorbed PVAm chains have been experimentally applied. The advantage of the different synthetic methods is discussed with regard to the resulting surface structure of the organic/inorganic hybrid materials.     

2‐Nitro‐1,4‐diaminobenzene‐Functionalized Poly(vinyl amine)s as Water‐Soluble UV‐Vis‐Sensitive pH Sensors

Summary: Nucleophilic aromatic substitution of 2,6‐O‐dimethyl‐β‐cyclodextrin (β‐DMCD)‐complexed 4‐fluoro‐3‐nitroaniline derivatives with poly(vinyl amine) (PVAm) in water results in 2‐nitro‐1,4‐benzenediamine‐functionalized water‐soluble PVAms in one step. The 2‐nitro‐1,4‐benzenediamine moiety linked to the polymer is solvatochromic and undergoes protonation and deprotonation as function of pH as shown by UV‐Vis spectroscopy. The occurrence of an isosbestic point in the UV‐Vis spectrum is suitable to directly determine the pK_a value using the Henderson‐Hasselbalch equation. The influence of the methyl group substitution of the polymer and the 2‐nitro‐1,4‐benzenediamine moiety on the pK_a is discussed.

Structure of the 4‐N,N‐dimethyl‐2‐nitro‐1,4‐benzenediamine‐functionalized PVAm and its solution in water at varying pH.     

Cross‐Linked Multilayers of Poly(vinyl amine) as a Single Component and Their Interaction with Proteins

Novel multilayer thin films that consist solely of cross‐linked single component layers are generated by a selective cross‐linking of the poly(vinyl amine) (PVAm) layers in [PVAm/poly(acrylic acid) (PAA)]_n thin films constructed either on silica particles or silicon wafers, followed by the removal of PAA. The surface topography of the (PVAm)_n multilayer thin films, before and after the adsorption of human serum albumin (HSA), has been studied by atomic force microscopy on the freeze‐dried films. The decrease of the average roughness of the film after the adsorption of HSA showed the protein was adsorbed into the (PVAm)_n film making these films potential reservoirs for proteins.

     

Adsorption of poly(vinyl formamide-co-vinyl amine) (PVFA-co-PVAm) polymers on zinc, zinc oxide, iron, and iron oxide surfaces

The adsorption of poly(vinyl formamide) (PVFA) and the statistic copolymers poly(vinyl formamide-co-vinyl amine) (PVFA-co-PVAm) onto zinc and iron metal particles as well as their oxides was investigated. The adsorbates were characterized by means of XPS, DRIFT spectroscopy, wet chemical analysis, and solvatochromic probes. Dicyano-bis-(1,10-phenanthroline)-iron(II) (1), 3-(4-amino-3-methylphenyl)-7-phenyl-benzo-[1,2-b:4,5-b']difuran-2,6-dione (2), and 4-tert-butyl-2-(dicyano-methylene)-5-[4-(diethylamino)-benzylidene]-Δ(3)-thiazoline (3) as solvatochromic probes were coadsorbed onto zinc oxide to measure various effects of surface polarity. The experimental findings showed that the adsorption mechanism of PVFA and PVFA-co-PVAm strongly depends on the degree of hydrolysis of PVFA and pH values and also on the kind of metal or metal oxide surfaces that were employed as adsorbents. The adsorption mechanism of PVFA/PVFA-co-PVAm onto zinc oxide and iron oxide surfaces is mainly affected by electrostatic interactions. Particularly in the region of pH 5, the adsorption of PVFA/PVFA-co-PVAm onto zinc and iron metal particles is additionally influenced by redox processes, dissolution, and complexation reactions.     

Synthesis and characterization of poly(vinyl amine)‐based amphiphilic comb‐like dextran glycopolymers by a two‐step method

Poly(vinyl amine) (PVAm)‐based amphiphilic glycopolymers were synthesized by a two‐step method, that is dextran molecules (Dex, M_w = 1500) were attached to the PVAm backbone by reacting amine groups with dextran lactone, and then, hexanoyl groups (Hex) were attached by reacting the PVAm free amine groups with N‐(hexanoyloxy)succinimide. By adjustment of the feed ratios of Dex/Hex, amphiphilic comb‐like glycopolymers with various hydrophilic and hydrophobic balances were prepared, and their structures were characterized by ¹H NMR. Surface activity of the amphiphilic glycopolymers at the air/water interface was demonstrated by reduction in water surface tension. Adsorption of the amphiphilic glycopolymers at the solid/water interface was examined on octadecyltrichlorosilane (OTS)‐coated coverslips by water contact angle measurements. The results show that the amphiphilic glycopolymers need about 20 mol % of dextran attachment to make an effective hydrophilic coating. In comparison with the one‐step reaction by addition of dextran lactone and alkyl succinimide simultaneously, the two‐step approach can attach Dex on PVAm as high as possible in the first step, and offers quantitative advantages in controlling the ratio of hydrophilic and hydrophobic chains along the PVAm backbone, resulting in increased water solubility for the final amphiphilic glycopolymers. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 192–199, 2006     

Synthesis and properties of crosslinked polyvinylformamide and polyvinylamine hydrogels in conjunction with silica particles

Polyvinylamine hydrogels with silica particles encapsulated (PVAm/silica) were produced by a two‐step synthesis. In the first step, polyvinylformamide/silica (PVFA/silica) hybrids were synthesized from vinylformamide (VFA) and 1,3‐divinylimidazolidin‐2‐one (1,3‐bisvinylethyleneurea, BVU), as the crosslinker, by radical copolymerization in silica/water suspensions using different compositions of VFA/BVU. The target product PVAm/silica was obtained by acidic hydrolysis of the PVFA/silica hydrogels in a second step. The chemical structures of both hydrogels, PVFA/silica and PVAm/silica, respectively, were revealed by solid‐state ¹³C(¹H) cross‐polarity/magic‐angle spinning NMR spectroscopy. Both hydrogels swelled significantly in water. The swelling capacity of the two systems was characterized by the correlation length ξ (or hydrodynamic blob size) of the network meshes with small‐angle neutron scattering experiments. ξ is significantly larger for PVAm/silica than for PVFA/silica, which corresponds to the observed higher swelling capacity of this polyelectrolyte material. Furthermore, the swelling behavior of the hybrid hydrogels was quantitatively described in terms of free swell capacity, centrifuge‐retention capacity, adsorption against pressure, and free swell rate as compared with values of the corresponding copolymer hydrogels. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3144–3152, 2002     

Morphological,mechanical, and in vitro cytocompatibility analysis of poly(vinyl alcohol)–silica glass hybrid scaffolds reinforced with cellulose nanocrystals

Cellulose nanocrystal-reinforced poly(vinyl alcohol)/silica glass hybrid scaffolds were fabricated using the freeze-drying method. In this study, we develop molecular-level-based hybrid scaffolds with possible bioactivity behavior by adding silica sol–gel. The results showed a highly porous structure and a significant improvement in mechanical performance (stiffness) of hybrid scaffolds with an increased content of cellulose nanocrystals followed by the addition of silica-based bioactive glass. In vitro cell study with MC3T3-E1 cells on hybrid scaffolds for 1 and 3 days revealed good cell adhesion and growth. Thus, the obtained hybrid scaffold may be a competitive candidate for bone tissue engineering applications.     

Synthesis of poly(vinyl acetate)‐graft‐polystyrene by a combination of cobalt‐mediated radical polymerization and atom transfer radical polymerization

Vinyl acetate and vinyl chloroacetate were copolymerized in the presence of a bis(trifluoro‐2,4‐pentanedionato)cobalt(II) complex and 2,2′‐azobis(4‐methoxy‐2,4‐dimethylvaleronitrile) at 30 °C, forming a cobalt‐capped poly(vinyl acetate‐co‐vinyl chloroacetate). The addition of 2,2,6,6‐tetramethyl‐1‐piperidinyloxy after a certain degree of copolymerization was reached afforded 2,2,6,6‐tetramethyl‐1‐piperidinyloxy‐terminated poly(vinyl acetate‐co‐vinyl chloroacetate) (PVOAc–MI; number‐average molecular weight = 31,000, weight‐average molecular weight/number‐average molecular weight = 1.24). A ¹H NMR study of the resulting PVOAc–MI revealed quantitative terminal 2,2,6,6‐tetramethyl‐1‐piperidinyloxy functionality and the presence of 5.5 mol % vinyl chloroacetate in the copolymer. The atom transfer radical polymerization (ATRP) of styrene (St) was studied with ethyl chloroacetate as a model initiator and five different Cu‐based catalysts. Catalysts with bis(2‐pyridylmethyl)octadecylamine (BPMODA) or tris(2‐pyridylmethyl)amine (TPMA) ligands provided the highest initiation efficiency and best control over the polymerization of St. The grafting‐from ATRP of St from PVOAc–MI catalyzed by copper complexes with BPMODA or TPMA ligands provided poly(vinyl acetate)‐graft‐polystyrene copolymers with relatively high polydispersity (>1.5) because of intermolecular coupling between growing polystyrene (PSt) grafts. After the hydrolysis of the graft copolymers, the cleaved PSt side chains had a monomodal molecular weight distribution with some tailing toward the lower number‐average molecular weight region because of termination. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 447–459, 2007     

Synthesis and hydrogel formation of fluorine‐containing amphiphilic ABA triblock copolymers

Fluorine‐containing amphiphilic ABA triblock copolymers, poly(2‐hydroxyethyl vinyl ether)‐block‐poly[2‐(2,2,3,3,3‐pentafluoropropoxy)ethyl vinyl ether]‐block‐poly(2‐hydroxyethyl vinyl ether) [poly(HOVE‐b‐PFPOVE‐b‐HOVE)] (HFH), poly[2‐(2,2,3,3,3‐pentafluoropropoxy)ethyl vinyl ether]‐block‐poly(2‐hydroxyethyl vinyl ether)‐block‐poly[2‐(2,2,3,3,3‐pentafluoropropoxy)ethyl vinyl ether] [poly(PFPOVE‐b‐HOVE‐b‐PFPOVE)] (FHF), and poly(n‐butyl vinyl ether)‐block‐poly(2‐hydroxyethyl vinyl ether)‐block‐poly(n‐butyl vinyl ether) [poly(NBVE‐b‐HOVE‐b‐NBVE)] (LHL), were synthesized, and their behavior in water was investigated. The aforementioned polymers were prepared by sequential living cationic polymerization of 2‐acetoxyethyl vinyl ether (AcOVE) and PFPOVE or NBVE, followed by hydrolysis of acetyl groups in polyAcOVE. FHF and LHL formed a hydrogel in water, whereas HFH gave a homogeneous aqueous solution. In addition, the gel‐forming concentration of FHF was much lower than that of corresponding LHL. Surface‐tension measurements of the aqueous polymer solutions revealed that all the triblock copolymers synthesized formed micelles or aggregates above about 1.0 × 10^?4 mol/L. The surface tensions of HFH and FHF solutions above the critical micelle concentration were lower than those of LHL, indicating high surface activity of fluorine‐containing triblock copolymers. Small‐angle X‐ray scattering measurements revealed that HFH formed a core‐shell sperical micelle in 1 wt % aqueous solutions, whereas the other block copolymers caused more conplicated assembly in the solutions. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3751–3760, 2001     

Gas transport in poly(vinyl methylbenzoates)

Permeation of eight gases (He, Ne, Ar, Kr, O₂, N₂, CO₂, and CH₄) in three isomeric poly(vinyl methylbenzoates) was measured by the time-lag method, and the effects of the shape of side groups on gas transport in the polymers were investigated. The p-methylphenyl side group of poly(vinyl p-methylbenzoate), which increases both interchain and intrachain distances, caused an increase in gas diffusivity. The diffusivity and density data were consistent with free volume theory. Two other isomeric polymers, poly(vinyl o-methylbenzoate) and poly(vinyl m-methylbenzoate), had lower gas diffusivities than poly(vinyl p-methylbenzoate) and poly(vinyl benzoate). The o-methyl and m-methyl groups on the phenyl ring were found to hinder gas diffusion, i.e., decrease the free volume. In contrast, the solubility of the gases in all these polymers was similar because of their similar chemical structures. The effects of hydroxyl groups also were investigated by the use of poly(vinyl m-methylbenzoate) containing a small number of vinyl alcohol units. The decrease in gas diffusivity was attributed to the decrease of free volume due to hydrogen bonding, but the change of gas solubility was still negligible.     

Grafting reactions of vinyl acetate onto poly[(vinyl alcohol)-co-(vinyl acetate)]

The grafting preference of vinyl acetate onto the methine carbon of poly(vinyl alcohol) (PVOH) versus the acetate group of poly(vinyl acetate) (PVAc) was determined as part of an attempt to prepare novel branched PVOH from partially hydrolyzed PVAc. The results showed long chain grafting on the acetate groups of the PVAc units rather than the methine carbons of the PVOH or PVAc units. Decreasing the monomer or initiator concentration decreased the molecular weight of the graft copolymer formed. Of the initiators studied, ammonium persulfate gave the largest increase in copolymer molecular weight. Both hydrolysis and reacetylation combined with gel permeation chromatography (GPC) and ¹³C-NMR of the fully hydrolyzed material were used to estimate the number and location of grafts. © 1996 John Wiley & Sons, Inc.     

Application of Supermacroporous Monolithic Hydrophobic Cryogel in Capturing of Albumin

Supermacroporous poly{2-hydroxyethyl methacrylate-co-[N,N-bis(2,6-diisopropylphenyl)-perylene-3,4,9,10-tetracarboxylic diimide]} [poly(HEMA-co-DIPPER)] monolithic cryogel column was prepared by radical cryocopolymerization of HEMA with DIPPER as functional comonomer and N,N′-methylene-bisacrylamide (MBAAm) as crosslinker directly in a plastic syringe for adsorption of albumin. The monolithic cryogel contained a continuous polymeric matrix having interconnected pores of 10–50 μm size. Poly(HEMA-co-DIPPER) cryogel was characterized by swelling studies, FTIR, scanning electron microscopy, and elemental analysis. The equilibrium swelling degree of the poly(HEMA-co-DIPPER) cryogel was 14.7 g H₂O/g dry cryogel. Poly(HEMA-co-DIPPER) cryogel was used in the adsorption/desorption of albumin from aqueous solutions. The nonspecific adsorption of albumin onto plain poly(HEMA) cryogel was very low (3.36 g/g polymer). The maximum amount of albumin adsorption from aqueous solution in acetate buffer was 40.9 mg/g polymer at pH 5.0. It was observed that albumin could be repeatedly adsorbed and desorbed with the poly(HEMA-co-DIPPER) cryogel without significant loss of adsorption capacity.     

Block copolymers of poly(ethylene oxide) and poly(vinyl alcohol) synthesized by the RAFT methodology

A methodology for the synthesis of well‐defined poly(ethylene oxide)‐block‐poly(vinyl alcohol) (PEO‐b‐PVA) and PVA‐b‐PEO‐b‐PVA polymers was reported. Novel xanthate end‐functionalized PEOs were synthesized by a series of end‐group transformations. They were then used to mediate the reversible addition–fragmentation chain transfer polymerization of vinyl acetate to obtain well‐defined poly(ethylene oxide)‐b‐poly(vinyl acetate) (PEO‐b‐PVAc) and PVAc‐b‐PEO‐b‐PVAc. When these block copolymers were directly hydrolyzed in methanol solution of sodium hydroxide, polymers with brown color were obtained, which was due to the formation of conjugated unsaturated aldehyde structures. To circumvent these side reactions, the xanthate groups were removed by adding a primary amine before hydrolysis and the products thus obtained were white powders. The polymers were characterized by gel permeation chromatography, ¹H NMR spectroscopy and FT‐IR. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1901–1910, 2009     

Microgel adhesives for wet cellulose: measurements and modeling

Nanostructured adhesive layers were prepared by adsorbing and/or grafting polyvinylamine (PVAm) onto carboxylated poly(N-isopropylacrylamide) (PNIPAM) microgels that were then assembled between layers of wet oxidized cellulose. The wet delamination force was measured as functions of PVAm content, PVAm molecular weight, coverage (mass adhesive/joint area), and the distribution of carboxyl groups in the PNIPAM microgels. The use of microgels is attractive because simple physical adsorption onto the cellulose surfaces before lamination gives much higher adhesive content and strength compared to the corresponding adsorbed linear PVAm. Wet adhesion increased with PVAm content in the microgels and the quantity of microgels in the joint whereas adhesion was independent of PVAm molecular weight. Physical adsorption of the PVAm onto/into the microgels gave the same adhesion as covalently coupled PVAm. Finally, the roles of microgel diameter, elasticity, and coverage were simulated by a simple peel adhesion model in which the microgels were treated as ideal springs.     

Stability of new optical pH sensing material based on cross-linked poly(vinyl alcohol) copolymer

Cross-linked poly(vinyl alcohol) (PVA)-silica gel copolymer has been employed as a optical pH sensor substrate for immobilisation of fluorescein. Cross-linking was carried out by the sol-gel process incorporating PVA in initial sol-gel solution of tetra-methoxysilane (TMOS) under acidic conditions. Three dimensional network formation could be achieved using compositions of PVA/TMOS=80-90/20-10 vol.% to result in crack-free films. The fluorescent sensor layers were prepared by dip-coating of gel solution onto glass slides. The dynamic fluorescence response towards different pH values was investigated in terms of the influence of sample ionic strength, membrane composition as well as age of sol-gel layers. Depending on the composition of the matrix pK_a values of 6.50, 6.68 and 7.06 were found 18 days after continues storage in buffer.     

Characterization of stimuli-sensitive polymers for biomedical applications

Stimuli-sensitive polymers were synthesized by copolymerizing varying ratios of N-isopropyl acrylamide(NIPAAm) and acrylic acid(AAc). The influence of polyelectrolytes on the lower critical solution temperatures(LCSTs) of these temperature/pH sensitive polymers was investigated in the pH range of 2-12. Polyelectrolyte complexes were prepared by mixing poly(NIPAAm-co-AAc) as anionic polyelectrolyte with poly(allyl amine)(PAA) or poly(L-lysine)(PLL) as cationic polyelectrolytes, respectively. Back titration was performed to determine the pK_a values of PAAc in poly(NIPAAm-co-AAc) and to study the effect of comonomer ionization on the cloud point temperature. The effect of polyelectrolyte complex formation on the conformation of PLL was studied as a function of temperature by means of circular dichroism(CD). The swelling ratio of poly(NIPAAm-co-AAc) hydrogels as a function of pH at various temperature was obtained by measuring the weight of the hydrogels in buffer solutions. The LCSTs of the poly(NIPAAm-co-AAc) were strongly affected by pH, polyelectrolyte solutes, AAc content, and charge density. The influence of more hydrophobic PLL as a polyelectrolyte on the cloud point of PNIPAAm/water in the copolymer was stronger than that of poly(allyl amine)(PAA). Indomethacin was loaded into these hydrogels, and controlled release of this molecule from the hydrogel was determined under various temperature and pH conditions using UV/Vis spectrophotometry.     

Lewis Acid‐Induced N‐Methyleneamines as Initiators in the Synthesis of Secondary Amine‐Terminated Polymers

Summary: The cationic polymerization of poly(tert‐butyl vinyl ether) using N‐methyleneamine equivalents derived from a Lewis acid/1,3,5‐trimethylhexahydro‐1,3,5‐triazine (TMTA) co‐initiating system is reported. The resulting polymers possessed secondary amine functionality at the chain terminus, verified by derivatization with 4‐chloro‐7‐nitrobenzo‐2‐oxa‐1,3‐diazole (NBD‐Cl) and subsequent analysis with GPC‐UV (470 nm) and ¹H NMR.

Use of N‐methyleneamine equivalents lacking aryl substituents to afford amine‐terminated poly(tert‐butyl vinyl ether).     

Free-radical polymerization of vinyl esters using fluoroalcohols as solvents: Effect of monomer structure on stereochemistry

Free-radical polymerization of vinyl esters including vinyl propionate (VPr), vinyl isobutylate (ViBu), vinyl 2,2-dimethylbutylate (VDMB), vinyl 2,2-dimethylvalerate (VDMV), vinyl 2,2-bis(trifluoromethyl)propionate (VF6Pi), and vinyl benzoate (VBz) was carried out using fluoroalcohols as solvents, and the tacticity of the obtained polymers was determined by NMR analysis of the produced poly(vinyl alcohol) (PVA). The polymerization of VPr, ViBu, VDMB, and VDMV, which are bulkier than VAc, in fluoroalcohols afforded polymers rich in heterotacticity (up to mr = 61%) similar to that of vinyl pivalate (VPi) whereas VAc is known to give a syndiotactic polymer under the reaction conditions used here. The polymerization of VF6Pi, which is the bulkiest among the monomers used in this study, gave a polymer rich in syndiotacticity in bulk and in fluoroalcohols regardless of the structure of the solvents. On the other hand, the polymerization of VBz in fluoroalcohols gave polymers with a higher isotacticity (up to mm = 33%) than bulk polymerization. Thus the monomer structure strongly affected the stereochemistry of the free-radical polymerization of vinyl esters in fluoroalcohols. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2677–2683, 1999