New synthetic routes to biscarbonylbipyridinerhenium(I) complexes cis,trans-[Re(X2bpy)(CO)2(PR3)(Y)n+ (X2bpy = 4,4'-X2-2,2'-bipyridine) via photochemical ligand substitution reactions, and their photophysical and electrochemical properties

Photochemical ligand substitution of fac-[Re(X2bpy)(CO)3(PR3)]+ (X2bpy = 4,4'-X2-2,2'-bipyridine; X = Me, H, CF3; R = OEt, Ph) with acetonitrile quantitatively gave a new class of biscarbonyl complexes, cis,trans[Re(X2bpy)(CO)2(PR3)(MeCN)]+, coordinated with four different kinds of ligands. Similarly, other biscarbonylrhenium complexes, cis,trans-[Re(X2bpy)(CO)2(PR3)(Y)]n+ (n = 0, Y = Cl-; n = 1, Y = pyridine, PR'3), were synthesized in good yields via photochemical ligand substitution reactions. The structure of cis,trans-[Re(Me2bpy)(CO)2[P(OEt)3](PPh3)](PF6) was determined by X-ray analysis. Crystal data: C38H42N2O5F6P3Re, monoclinic, P2(1/a), a = 11.592(1) A, b = 30.953(4) A, c = 11.799(2) A, V = 4221.6(1) A3, Z = 4, 7813 reflections, R = 0.066. The biscarbonyl complexes with two phosphorus ligands were strongly emissive from their 3MLCT state with lifetimes of 20-640 ns in fluid solutions at room temperature. Only weak or no emission was observed in the cases Y = Cl-, MeCN, and pyridine. Electrochemical reduction of the biscarbonyl complexes with Y = Cl- and pyridine in MeCN resulted in efficient ligand substitution to give the solvento complexes cis,trans-[Re(X2bpy)(CO)2(PR3)(MeCN)]+.     

Photochemical ligand substitution reactions of fac-[Re(bpy)(CO)3Cl] and derivatives

Excitation by high-energy light, such as that of 313 nm wavelength, induces a photochemical ligand substitution (PLS) reaction of fac-[Re(bpy)(CO)3Cl] (1a) to give the solvento complexes (OC-6-34)- and (OC-6-44)-[Re(bpy)(CO)2(MeCN)Cl] (2 and 3) in good yields. The disappearance quantum yield of 1a was 0.01+/-0.001 at 313 nm. The products were isolated, and X-ray crystallographic analysis was successfully performed for 2. Time-resolved IR measurements clearly indicated that the CO ligand dissociates with subpicosecond rates after excitation, leading to vibrationally hot photoproducts, which relax within 50-100 ps. Detailed studies of the reaction mechanism show that the PLS reaction of 1a does not proceed via the lowest vibrational level in the 3MLCT excited state. The PLS reaction gives 2 and (OC-6-24)-[Re(bpy)(CO)2(MeCN)Cl] (5) as primary products, and one of the products, 5, isomerizes to 3. This type of PLS reaction is more general, occurring in various fac-rhenium(I) diimine tricarbonyl complexes such as fac-[Re(X2bpy)(CO)3Cl] (X2bpy=4,4'-X2-bpy; X=MeO, NH2, CF3), fac-[Re(bpy)(CO)3(pyridine)]+, and fac-[Re(bpy)(CO)3(MeCN)]+. The stable photoproducts (OC-6-44)- and (OC-6-43)-[Re(bpy)(CO)2(MeCN)(pyridine)]+ and (OC-6-32)- and (OC-6-33)-[Re(bpy)(CO)2(MeCN)2]+ were isolated. The PLS reaction of rhenium tricarbonyl-diimine complexes is therefore applicable as a general synthetic method for novel dicarbonyls.     

Mechanism for the activation of carbon monoxide via oxorhenium complexes

Activation of CO by the rhenium(V) oxo complex [(DAAm)Re(O)(CH(3))] (1) [DAAm = N,N-bis(2-arylaminoethyl)methylamine; aryl = C(6)F(5), Mes] resulted in the isolation of the rhenium(III) acetate complex [(DAAm)Re(O(2)CCH(3))(CO)] (3). The mechanistic details of this reaction were explored experimentally. The novel oxorhenium(V) acyl intermediate [(DAAm)Re(O)(C(O)CH(3))] (2) was isolated, and its reactivity with CO was investigated. An unprecedented mechanism is proposed: CO is activated by the metal oxo complex 1 and inserted into the rhenium-methyl bond to yield acyl complex 2, after which subsequent migration of the acyl ligand to the metal oxo ligand yields acetate complex 3. X-ray crystal structures of 2 and 3 are reported.     

Mechanistic insight into hydrosilylation reactions catalyzed by high valent ReX (X = O, NAr, or N) complexes: the silane (Si-H) does not add across the metal-ligand multiple bond

Treatment of oxo and imido-rhenium(V) complexes Re(X)Cl3(PR3)2 (X = O, NAr, and R = Ph or Cy) (1-2) with Et3SiH affords Re(X)Cl2(H)(PR3)2 in high yields. Cycloaddition of silane across the ReX multiple bonds is not observed. Two rhenium(V) hydrides (X = O and R = Ph, 4a; X = NMes and R = Ph, 5a) have been structurally characterized by X-ray diffraction. The kinetics of the reaction of Re(O)Cl3(PPh3)2 (1a) with Et3SiH is characterized by phosphine inhibition and saturation in [Et3SiH]. Hence, formation of Re(O)Cl2(H)(PPh3)2 (4a) proceeds via a sigma-adduct followed by heterolytic cleavage of the Si-H bond and transfer of silylium (Et3Si+) to chloride. Oxo and imido complexes of rhenium(V) (1-2) as well as their nitrido analogues, Re(N)Cl2(PR3)2 (3), catalyze the hydrosilylation of PhCHO under ambient conditions, with the reactivity order imido > oxo > nitrido. The isolable oxorhenium(V) hydride 4a reacts with PhCHO to afford the alkoxide Re(O)Cl2(OCH2Ph)(PPh3)2 (6a) with kinetic dependencies that are consistent with aldehyde coordination followed by aldehyde insertion into the Re-H bond. The latter (6a) regenerates the rhenium hydride upon reaction with Et3SiH. These stoichiometric reactions furnish a possible catalytic cycle. However, quantitative kinetic analysis of the individual stoichiometric steps and their comparison to steady-state kinetics of the catalytic reaction reveal that the observed intermediates do not account for the predominant catalytic pathway. Furthermore, for Re(O)Cl2(H)(PCy3)2 and Re(NMes)Cl2(H)(PPh3)2 aldehyde insertion into the Re-H bond is not observed. Therefore, based on the kinetic dependencies under catalytic conditions, a consensus catalytic pathway is put forth in which silane is activated via sigma-adduct formation cis to the ReX bond followed by heterolytic cleavage at the electrophilic rhenium center. The findings presented here demonstrate the so-called Halpern axiom, the observation of "likely" intermediates in a catalytic cycle, generally, signals a nonproductive pathway.     

Rhenium chemistry of diazabutadienes and derived iminoacetamides spanning the valence domain II-VI. Synthesis, characterization, and metal-promoted regiospecific imine oxidation

The reaction of diazabutadienes of type R'N=C(R)-C(R)=NR', L (R = H, Me; R' = cycloalkyl, aryl) with Re(V)OCl(3)(AsPh(3))(2) has furnished Re(V)OCl(3)(L), 1, from which Re(III)(OPPh(3))Cl(3)(L), 2, and Re(V)(NAr)Cl(3)(L), 3, have been synthesized. Chemical oxidation of 2(R = H) by aqueous H(2)O(2) and of 3(R = H) by dilute HNO(3) has yielded Re(IV)(OPPh(3))Cl(3)(L'), 5, and Re(VI)(NAr)Cl(3)(L'), 4, respectively, where L' is the monoionized iminoacetamide ligand R'N=C(H)-C(=O)-NR'(-). Finally, the reaction of Re(V)O(OEt)X(2)(PPh(3))(2) with L has furnished bivalent species of type Re(II)X(2)(L)(2), 6(X = Cl, Br). The X-ray structures of 1 (R = Me, R' = Ph), 3 (R = H, R' = Ph, Ar = Ph), and 4 (R = H, R' = cycloheptyl, Ar = C(6)H(4)Cl) are reported revealing meridional geometry for the ReCl(3) fragment and triple bonding in the ReO (in 1) and ReNAr (in 3 and 4 ) fragments. The cis geometry (two Re-X stretches) of ReX(2)(L)(2) is consistent with maximized Re(II)-L back-bonding. Both ReX(2)(L)(2) and Re(NAr)Cl(3)(L') are paramagnetic (S = (1)/(2)) and display sextet EPR spectra in solution. The g and A values of Re(NAr)Cl(3)(L') are, respectively, lower and higher than those of ReX(2)(L)(2). All the complexes are electroactive in acetonitrile solution. The Re(NAr)Cl(3)(L) species display the Re(VI)/Re(V) couple near 1.0 V versus SCE, and coulometric studies have revealed that, in the oxidative transformation of 3 to 4, the reactive intermediate is Re(VI)(NAr)Cl(3)(L)(+) which undergoes nucleophilic addition of water at an imine site followed by induced electron transfer finally affording 4. In the structure of 3 (R = H, R' = Ph, Ar = Ph), the Re-N bond lying trans to the chloride ligand is approximately 0.1 A shorter than that lying trans to NPh. It is thus logical that the imine function incorporating the former bond is more polarized and therefore subject to more facile nucleophilic attack by water. This is consistent with the regiospecificity of the imine oxidation as revealed by structure determination of 4 (R = H, R' = cycloheptyl, Ar = C(6)H(4)Cl).     

Electron-Transfer Reactions of Re(CO)(5): Atom-Transfer-Concerted Mechanism vs Bimetallic Intermediate Formation

Flash photochemically generated Re(CO)(5) reacts with halide complexes, Cu(Me(4)[14]-1,3,8,10-tetraeneN(4))X(+), Cu(Me(2)pyo[14]trieneN(4))X(+), and Ni(Me(2)pyo[14]trieneN(4))X(+) (X = Cl, Br, I) and ion pairs, [Co(bipy)(3)(3+), X(-)]. The rate constants for the electron transfers have values, k approximately 10(9) M(-1) s(-1), close to expectations for processes with diffusion-controlled rates. Reaction intermediates, probably bimetallic species, were detected in electron-transfer reactions of Re(CO)(5) with Cu(Me(6)[14]dieneN(4))X(+), (X = Cl, Br, I). In the absence of the halides X(-), the electron-transfer reactions between Re(CO)(5) and these complexes are slow, k < 10(6) M(-1) s(-1). The results are discussed in terms of inner-sphere pathways, namely an atom-transfer-concerted mechanism. The mediation of bimetallic intermediates in the electron transfer is also considered.     

Mechanism of the photochemical ligand substitution reactions of fac-[Re(bpy)(CO)(3)(PR(3))](+) complexes and the properties of their triplet ligand-field excited states

We report herein the mechanism of the photochemical ligand substitution reactions of a series of fac-[Re(X(2)bpy)(CO)(3)(PR(3))](+) complexes (1) and the properties of their triplet ligand-field ((3)LF) excited states. The reason for the photostability of the rhenium complexes [Re(X(2)bpy)(CO)(3)(py)](+) (3) and [Re(X(2)bpy)(CO)(3)Cl] (4) was also investigated. Irradiation of an acetonitrile solution of 1 selectively gave the biscarbonyl complexes cis,trans-[Re(X(2)bpy)(CO)(2)(PR(3))(CH(3)CN)](+) (2). Isotope experiments clearly showed that the CO ligand trans to the PR(3) ligand was selectively substituted. The photochemical reactions proceeded via a dissociative mechanism from the (3)LF excited state. The thermodynamical data for the (3)LF excited states of complexes 1 and the corrective nonradiative decay rate constants for the triplet metal-to-ligand charge-transfer ((3)MLCT) states were obtained from temperature-dependence data for the emission lifetimes and for the quantum yields of the photochemical reactions and the emission. Comparison of 1 with [Re(X(2)bpy)(CO)(3)(py)](+) (3) and [Re(X(2)bpy)(CO)(3)Cl] (4) indicated that the (3)LF states of some 3- and 4-type complexes are probably accessible from the (3)MLCT state even at ambient temperature, but these complexes were stable to irradiation at 365 nm. The photostability of 3 and 4, in contrast to 1, can be explained by differences in the trans effects of the PR(3), py, and Cl(-) ligands.     

Harnessing redox-active ligands for low-barrier radical addition at oxorhenium complexes

The addition of an [X](+) electrophile to the five-coordinate oxorhenium(V) anion [Re(V)(O)(ap(Ph))(2)](-) {[ap(Ph)](2-) = 2,4-di-tert-butyl-6-(phenylamido)phenolate} gives new products containing Re-X bonds. The Re-X bond-forming reaction is analogous to oxo transfer to [Re(V)(O)(ap(Ph))(2)](-) in that both are 2e(-) redox processes, but the electronic structures of the products are different. Whereas oxo addition to [Re(V)(O)(ap(Ph))(2)](-) yields a closed-shell [Re(VII)(O)(2)(ap(Ph))(2)](-) product of 2e(-) metal oxidation, [Cl](+) addition gives a diradical Re(VI)(O)(ap(Ph))(isq(Ph))Cl product ([isq(Ph)](?-) = 2,4-di-tert-butyl-6-(phenylimino)semiquinonate) with 1e(-) in a Re d orbital and 1e(-) on a redox-active ligand. The differences in electronic structure are ascribed to differences in the π basicity of [O](2-) and Cl(-) ligands. The observation of ligand radicals in Re(VI)(O)(ap(Ph))(isq(Ph))X provides experimental support for the capacity of redox-active ligands to deliver electrons in other bond-forming reactions at [Re(V)(O)(ap(Ph))(2)](-), including radical additions of O(2) or TEMPO(?) to make Re-O bonds. Attempts to prepare the electron-transfer series monomers between Re(VI)(O)(ap(Ph))(isq(Ph))X and [Re(V)(O)(ap(Ph))(2)](-) yielded a symmetric bis(μ-oxo)dirhenium complex. Formation of this dimer suggested that Re(VI)(O)(ap(Ph))(isq(Ph))Cl may be a source of an oxyl metal fragment. The ability of Re(VI)(O)(ap(Ph))(isq(Ph))Cl to undergo radical coupling at oxo was revealed in its reaction with Ph(3)C(?), which affords Ph(3)COH and deoxygenated metal products. This reactivity is surprising because Re(VI)(O)(ap(Ph))(isq(Ph))Cl is not a strong outer-sphere oxidant or oxo-transfer reagent. We postulate that the unique ability of Re(VI)(O)(ap(Ph))(isq(Ph))Cl to effect oxo transfer to Ph(3)C(?) arises from symmetry-allowed mixing of a populated Re≡O π bond with a ligand-centered [isq(Ph)](?-) ligand radical, which gives oxyl radical character to the oxo ligand. This allows the closed-shell oxo ligand to undergo a net 2e(-) oxo-transfer reaction to Ph(3)C(?) via kinetically facile redox-active ligand-mediated radical steps. Harnessing intraligand charge transfer for radical reactions at closed-shell oxo ligands is a new strategy to exploit redox-active ligands for small-molecule activation and functionalization. The implications for the design of new oxidants that utilize low-barrier radical steps for selective multielectron transformations are discussed.     

Reactions of the dirhenium(II) complex Re2Cl4(mu-dppm)2 with pyridinecarboxylic acids. Examples of bidentate O,O versus N,O coordination and tridentate O,N,O coordination and structural isomers that contain the pyridine-2,6-dicarboxylate ligand

Pyridine-2-carboxylic acid, pyridine-2,3-dicarboxylic acid, and pyridine-2,4-dicarboxylic acid or their [(Ph(3)P)(2)N](+) salts react with the triply bonded dirhenium(II) complex Re(2)Cl(4)(mu-dppm)(2) (dppm = Ph(2)PCH(2)PPh(2)) in refluxing ethanol to afford unsymmetrical substitution products of the type Re(2)(eta(2)-N,O)Cl(3)(mu-dppm)(2), where N,O represents a chelating pyridine-2-carboxylate ligand (N,O = O(2)C-2-C(5)H(4)N (1), O(2)C-2-C(5)H(3)N(-3-CO(2)Et) (3), or O(2)C-2-C(5)H(3)N(-4-CO(2)H) (4)). The carboxylate groups in the 3- and 4- positions are not bound to the metal centers; in the case of 3 this group undergoes esterification in the refluxing ethanol solvent. Structure determinations have shown that 1, 3, and 4 possess similar structures in which there is an axial Re-O (carboxylate) bond (collinear with the Re(triple bond)Re bond) and the mu-dppm ligands are bound in a trans,cis fashion to the two Re atoms which have the ligand atom arrangement [P(2)NOClReReCl(2)P(2)]. The tridentate dianionic pyridine-2,6-dicarboxylate ligand (dipic) reacts with Re(2)Cl(4)(mu-dppm)(2) in ethanol at room temperature to give a compound Re(2)(dipic)Cl(2)(mu-dppm)(2) (6) in which the dipic ligand is bound in a symmetrical eta(3)-(O,N,O) fashion to one Re atom, with the N atom in an axial position (collinear with the Re(triple bond)Re bond) and with preservation of the same trans,trans coordination of the mu-dppm ligands that is present in Re(2)Cl(4)(mu-dppm)(2). Under reflux conditions, this kinetic product isomerizes to the thermodynamically favored isomer 5 with an unsymmetrical structure in which the dipic ligand chelates to one Re atom (as in 1, 3, and 4) and uses its other carboxylate group to bridge to the second Re atom. The isomerization of 6 to 5, which also results in a change in the coordination of the pair of mu-dppm ligand to trans,cis, is believed to occur by a partial "merry-go-round" process, a mechanism that probably explains the structures of the thermodynamic products 1, 3, and 4. The reaction of Re(2)Cl(4)(mu-dppm)(2) with pyridine-3-carboxylate gives the trans isomer of Re(2)(mu:eta(2)-O(2)C-3-C(5)H(4)N)(2)Cl(2)(mu-dppm)(2) (2) in which a pair of carboxylate bridges are present and the pyridine N atom is not coordinated. Single-crystal X-ray structural details are reported for 1-6.     

Ruthenium complexes with tridentate PNX (X = O, S) donor ligands

The ligands, PhPNXMe (1), PhPNXPh (2), and PhPNSMe (3), (PhPNX = 2-Ph2P-C6H4CH[double bond, length as m-dash]NC6H4X-2; X = O, S) have been prepared. A range of new ruthenium complexes were synthesised using these and related ligands, namely: [{RuCl(PhPNO)}2Cl] (4), [Ru(PhPNO)2] (5), [RuCl(PhPNXR)(PPh3)]BPh4 [X = O, R = Me (6); X = O, R = Ph (7); X = S, R = Me (8)], [{RuCl(PhPNX'R)}2Cl]X [X' = O, R = Me, X = Cl(-) (9); X' = S, R = Me, X = BPh4(-) or PF6(-) (10)], and [RuCl(PhPNO-eta 6C6H5)]BPh4 (11). The catalytic activity of these complexes with respect to the hydrosilyation of acetophenone and the hydrogenation of styrene has been investigated, giving an insight into the requirements for an active complex in these reactions.     

Synthesis, structure, and reactivity of ruthenium carboxylato and 2-oxocarboxylato complexes bearing the bis(3,5-dimethylpyrazol-1-yl)acetato ligand

A series of ruthenium(II) acetonitrile, pyridine (py), carbonyl, SO2, and nitrosyl complexes [Ru(bdmpza)(O2CR)(L)(PPh3)] (L = NCMe, py, CO, SO2) and [Ru(bdmpza)(O2CR)(L)(PPh3)]BF4 (L = NO) containing the bis(3,5-dimethylpyrazol-1-yl)acetato (bdmpza) ligand, a N,N,O heteroscorpionate ligand, have been prepared. Starting from ruthenium chlorido, carboxylato, or 2-oxocarboxylato complexes, a variety of acetonitrile complexes [Ru(bdmpza)Cl(NCMe)(PPh3)] (4) and [Ru(bdmpza)(O2CR)(NCMe)(PPh3)] (R = Me (5a), R = Ph (5b)), as well as the pyridine complexes [Ru(bdmpza)Cl(PPh3)(py)] (6) and [Ru(bdmpza)(O2CR)(PPh3)(py)] (R = Me (7a), R = Ph (7b), R = (CO)Me (8a), R = (CO)Et (8b), R = (CO)Ph) (8c)), have been synthesized. Treatment of various carboxylato complexes [Ru(bdmpza)(O2CR)(PPh3)2] (R = Me (2a), Ph (2b)) with CO afforded carbonyl complexes [Ru(bdmpza)(O2CR)(CO)(PPh3)] (9a, 9b). In the same way, the corresponding sulfur dioxide complexes [Ru(bdmpza)(O2CMe)(PPh3)(SO2)] (10a) and [Ru(bdmpza)(O2CPh)(PPh3)(SO2)] (10b) were formed in a reaction of the carboxylato complexes with gaseous SO2. None of the 2-oxocarboxylato complexes [Ru(bdmpza)(O2C(CO)R)(PPh3)2] (R = Me (3a), Et (3b), Ph (3c)) showed any reactivity toward CO or SO2, whereas the nitrosyl complex cations [Ru(bdmpza)(O2CMe)(NO)(PPh3)](+) (11) and [Ru(bdmpza)(O2C(CO)Ph)(NO)(PPh3)](+) (12) were formed in a reaction of the acetato 2a or the benzoylformato complex 3c with an excess of nitric oxide. Similar cationic carboxylato nitrosyl complexes [Ru(bdmpza)(O2CR)(NO)(PPh3)]BF4 (R = Me (13a), R = Ph (13b)) and 2-oxocarboxylato nitrosyl complexes [Ru(bdmpza)(O2C(CO)R)(NO)(PPh3)]BF4 (R = Me (14a), R = Et (14b), R = Ph (14c)) are also accessible via a reaction with NO[BF4]. X-ray crystal structures of the chlorido acetonitrile complex [Ru(bdmpza)Cl(NCMe)(PPh3)] (4), the pyridine complexes [Ru(bdmpza)(O2CMe)(PPh3)(py)] (7a) and [Ru(bdmpza)(O2CC(O)Et)(PPh3)(py)] (8b), the carbonyl complex [Ru(bdmpza)(O2CPh)(CO)(PPh3)] (9b), the sulfur dioxide complex [Ru(bdmpza)(O2CPh)(PPh3)(SO2)] (10b), as well as the nitrosyl complex [Ru(bdmpza)(O2C(CO)Me)(NO)(PPh3)]BF4 (14a), are reported. The molecular structure of the sulfur dioxide complex [Ru(bdmpza)(O2CPh)(PPh3)(SO2)] (10b) revealed a rather unusual intramolecular SO2-O2CPh Lewis acid-base adduct.     

Synthesis and characterisation of mixed ligand Pt(II) and Pt(IV) oxadiazoline complexes

The nitrile ligands in trans-[PtX2(PhCN)2] (X = Cl, Br, I) undergo sequential 1,3 dipolar cycloadditions with nitrones R1R2C=N+(Me)-O(-) (R1 = H, R2 = Ph; R1 = CO2Et, R2 = CH2CO2Et) to selectively form the Delta4-1,2,4-oxadiazoline complexes trans-[PtX2(PhCN) (N=C(Ph)-O-N(Me)-CR1R2)] or trans-[PtX2(N=C(Ph)-O-N(Me)-CR1R2)2] in high yields. The reactivity of the mixed ligand complexes trans-[PtX2(PhCN)(N=C(Ph)-O-N(Me)-CR1R2)] towards oxidation and ligand substitution was studied in more detail. Oxidation with Cl2 or Br2 provides the Pt(IV) species trans-[PtX2Y2(PhCN)(N=C(Ph)-O-N(Me)-CH(Ph))] (X, Y = Cl, Br). The mixed halide complex (X = Cl, Y = Br) undergoes halide scrambling in solution to form trans-[PtX(4-n)Yn(PhCN)(N=C(Ph)-O-N(Me)-CH(Ph))] as a statistical mixture. Ligand substitution in trans-[PtCl2(PhCN)(N=C(Ph)-O-N(Me)-CR1R2)] allows for selective replacement of the coordinated nitrile by nitrogen heterocycles such as pyridine, DMAP or 1-benzyl-2-methylimidazole to produce mixed ligand Pt(II) complexes of the type trans- [PtX2(heterocycle)(N=C(Ph)-O-N(Me)-CR1R2)]. All compounds were characterised by elemental analysis, mass spectrometry, IR and 1H, 13C and 195Pt NMR spectroscopy. Single-crystal X-ray structural analysis of (R,S)-trans-[PtBr2(N=C(Ph)-O-N(Me)-CH(Ph))2] and trans-[PtCl2(C5H5N)(N=C(Ph)-O-N(Me)-CH(Ph))] confirms the molecular structure and the trans configuration of the heterocycles relative to each other.     

Oxo transfer reactions mediated by bis(dithiolene)tungsten analogues of the active sites of molybdoenzymes in the DMSO reductase family: comparative reactivity of tungsten and molybdenum.

The discovery of tungsten enzymes and molybdenum/tungsten isoenzymes, in which the mononuclear catalytic sites contain a metal chelated by one or two pterin-dithiolene cofactor ligands, has lent new significance to tungsten-dithiolene chemistry. Reaction of [W(CO)(2)(S(2)C(2)Me(2))(2)] with RO(-) affords a series of square pyramidal desoxo complexes [W(IV)(OR')(S(2)C(2)Me(2))(2)](1)(-), including R' = Ph (1) and Pr(i)() (3). Reaction of 1 and 3 with Me(3)NO gives the cis-octahedral complexes [W(VI)O(OR')(S(2)C(2)Me(2))(2)](1)(-), including R' = Ph (6) and Pr(i)() (8). These W(IV,VI) complexes are considered unconstrained versions of protein-bound sites of DMSOR and TMAOR (DMSOR = dimethylsulfoxide reductase, TMAOR = trimethylamine N-oxide reductase) members of the title enzyme family. The structure of 6 and the catalytic center of one DMSO reductase isoenzyme have similar overall stereochemistry and comparable bond lengths. The minimal oxo transfer reaction paradigm thought to apply to enzymes, W(IV) + XO --> W(VI)O + X, has been investigated. Direct oxo transfer was demonstrated by isotope transfer from Ph(2)Se(18)O. Complex 1 reacts cleanly and completely with various substrates XO to afford 6 and product X in second-order reactions with associative transition states. The substrate reactivity order with 1 is Me(3)NO > Ph(3)AsO > pyO (pyridine N-oxide) > R(2)SO > Ph(3)PO. For reaction of 3 with Me(3)NO, k(2) = 0.93 M(-)(1) s(-)(1), and for 1 with Me(2)SO, k(2) = 3.9 x 10(-)(5) M(-)(1) s(-)(1); other rate constants and activation parameters are reported. These results demonstrate that bis(dithiolene)W(IV) complexes are competent to reduce both N-oxides and S-oxides; DMSORs reduce both substrate types, but TMAORs are reported to reduce only N-oxides. Comparison of k(cat)/K(M) data for isoenzymes and k(2) values for isostructural analogue complexes reveals that catalytic and stoichiometric oxo transfer, respectively, from substrate to metal is faster with tungsten and from metal to substrate is faster with molybdenum. These results constitute a kinetic metal effect in direct oxo transfer reactions for analogue complexes and for isoenzymes provided the catalytic sites are isostructural. The nature of the transition state in oxo transfer reactions of analogues is tentatively considered. This research presents the first kinetics study of substrate reduction via oxo transfer mediated by bis(dithiolene)tungsten complexes.     

Iron(II) complexes with tetradentate bis(aminophenolate) ligands: synthesis and characterization, solution behavior, and reactivity with O(2)

Tetradentate bis(aminophenolate) ligands H(2)salan(X) and H(2)bapen(X) (where X refers to the para-phenolate substituent = H, Me, F, Cl) react with [Fe{N(SiMe(3))(2)}(2)] to form iron(II) complexes, which in the presence of suitable donor ligands L (L = pyridine or THF) can be isolated as the complexes [Fe(salan(X))(L)(2)] and [Fe(bapen(X))(L)(2)]. In the absence of donor ligands, either mononuclear complexes, for example, [Fe(salan(tBu,tBu))], or dinuclear complexes of the type [Fe(salan(X))](2) are obtained. The dynamic coordination behavior in solution of the complexes [Fe(salan(F))(L)(2)] and [Fe(bapen(F))(L)(2)] has been investigated by VT (1)H and (19)F NMR spectroscopy, which has revealed equilibria between isomers with different ligand coordination topologies cis-α, cis-β and trans. Exposure of the iron(II) salan(X) complexes to O(2) results in the formation of oxo-bridged iron(III) complexes of the type [{Fe(salan(X))}(2)(μ-O)] or [{Fe(salan(X))(L)}(2)(μ-O)]. The lack of catalytic activity of the iron(II) salan and bapen complexes in the oxidation of cyclohexane with H(2)O(2) as the oxidant is attributed to the rapid formation of stable and catalytically inactive oxo-bridged iron(III) complexes.     

Studies of C-S bond cleavage reactions of Re(V) dithiolates: synthesis, reactivity, and mechanism

A series of rhenium(V) complexes, [(X)(ReO)(dt)(PPh(3))] and [(o-SC(6)H(4)PPh(2))(ReO)(mtp)], were prepared to explore electronic effects on the C-S cleavage reaction that occurs upon reaction with PAr(3) at ambient temperature [where X = S(C(6)H(4)-p-Z) (Z = OMe, Me, H, F, Cl), OPh, Cl, and SC(2)H(5), and dt is the chelating dithiolate ligand derived from 2-(mercaptomethyl)thiophenol, 1,2-ethanedithiol, 1,3-propanedithiol, 1,3-butanedithiol, and 2,4-pentanedithiol]. The scope and selectivity of the C-S activation were examined. The C-S bond cleavage to form metallacyclic Re(V) complexes with a ReS core occurs only for the complexes with mtp and pdt frameworks and X = SAr and SC(2)H(5). The difference in reactivity is due to the different donating abilities of ancillary and dithiolate ligands, especially their pi-donating ability, which plays a critical role in C-S activation. The kinetics of the C-S activation process was determined; nucleophilic attack of PPh(3) on the oxo group of the Re(V)O core appears to be the rate-controlling step. The reaction is accelerated by electron-poor ArS ligands, but is unaffected by the substituents on phosphines. A detailed mechanistic study is presented. The results represent a rare example of migration of alkanethiolate leading to the formation of alkylthiolato complexes.     

Mixed-metal assemblies containing multiply bonded dirhenium species linked through thiocyanate- and cyanide-containing bridging units

The lability of the terminal Re-Cl bond that is cis to the bridging CO ligand in the edge-sharing bioctahedral complexes Re(2)(mu-Cl)(mu-CO)(mu-PP)(2)Cl(3)(L), where PP = Ph(2)PC(=CH(2))PPh(2) (dppE) when L = CO (1) and PP = Ph(2)PCH(2)PPh(2) (dppm) when L = CO (2) or XyINC (3), has been exploited in the preparation of mixed-metal Re(4)Pd(2), Re(2)Ag, Re(2)W, Re(2)Pt, and Re(2)Rh assemblies, in which the dirhenium units are bound to the other metals through NCS or CN bridges. These complexes, which retain the Re=Re bonds of the parent dirhenium complexes, comprise the novel centrosymmetric complex [Re(2)Cl(3)(mu-dppE)(2)(CO)(2)(mu-NCS)](2)Pd(2)(mu-SCN)(mu-NCS)Cl(2) (9), and the trimetallic complexes Re(2)Cl(3)(mu-dppE)(2)(CO)(2)[(mu-NC)Ag(CN)] (10), Re(2)Cl(3)(mu-dppE)(2)(CO)(2)[(mu-NC)W(CO)(5)] (11), [Re(2)Cl(3)(mu-dppE)(2)(CO)(2)[(mu-NC)Pt(CN)(CN-t-Bu)(2)]]PF(6) (12), [Re(2)Cl(3)(mu-dppE)(2)(CO)(2)[(mu-N(CN)(2))Rh(CO)(PPh(3))(2)]]O(3)SCF(3) (13), and Re(2)Cl(3)(mu-dppm)(2)(CO)(2)[(mu-NC)W(CO)(5)] (16). The identities of 9 and 16 have been established by X-ray crystallography, and all complexes characterized by IR and NMR spectroscopy and cyclic voltammetry. The reactions of the dicarbonyl complex 1, and the isomeric pair of complexes Re(2)Cl(4)(mu-dppm)(2)(CO)(CNXyl), which have edge-sharing bioctahedral (ESBO) (3) and open bioctahedral (OBO) (4) geometries, with Na[N(CN)(2)] and K[C(CN)(3)] have been used to prepare complexes in which the uncoordinated CN groups have the potential to coordinate other mono- or dimetal units to form extended arrays. The complexes which have been prepared and characterized are the monosubstituted species Re(2)Cl(3)(X)(mu-dppE)(2)(CO)(2) (X = N(CN)(2) (14) or C(CN)(3) (15)) and Re(2)Cl(3)(X)(mu-dppm)(2)(CO)(CNXyl) (X = N(CN)(2) (17) or C(CN)(3) (18) with ESBO structures; X = N(CN)(2) (19) or C(CN)(3) (20) with OBO structures), of which 15, 18, and 20 have been characterized by single-crystal X-ray structure determinations. The substitutional labilities of the Re-Cl bonds in the complexes Re(2)Cl(4)(mu-dppm)(2)(CO) (5), Re(2)Cl(4)(mu-dppm)(2)(CNXyl) (6), and Re(2)Cl(4)(mu-dppm)(2) (7) toward Na[N(CN)(2)] and K[C(CN)(3)] have also been explored and the complexes Re(2)Cl(3)(X)(mu-dppm)(2)(CO) (X = N(CN)(2) (21) or C(CN)(3) (22)), Re(2)Cl(3)(X)(mu-dppm)(2)(CNXyl) (X = N(CN)(2) (23) or C(CN)(3) (24)), Re(2)Cl(2)(X)(2)(mu-dppm)(2)(CNXyl) (X = N(CN)(2) (25) or C(CN)(3) (26)), Re(2)[N(CN)(2)](4)(mu-dppm)(2) (27), and Re(2)[C(CN)(3)](4)(mu-dppm)(2) (28) isolated in good yield. Single-crystal X-ray structure determinations of 24, 26, and 27 have shown that the Re-Re triple bonds present in the starting materials 5-7 are retained in these products.     

General synthesis of di-mu-oxo dimanganese complexes as functional models for the oxygen evolving complex of photosystem II

A series of complexes with the formula [Mn(III/IV)2(mu-O)2(L)2(X)2]3+ have been prepared in situ from Mn(II)LCl2 precursors by a general preparative method (L = terpy, Cl-terpy, Br-terpy, Ph-terpy, tolyl-terpy, mesityl-terpy, t Bu3-terpy, EtO-terpy, py-phen, dpya, Me2N-terpy, or HO-terpy, and X = a labile ligand such as water, chloride, or sulfate). The parent complex, where L = terpy and X = water, is a functional model for the oxygen-evolving complex of photosystem II (Limburg, et al. J. Am. Chem. Soc. 2001, 123, 423-430). Crystals of Mn(II)(dpya)Cl2, Mn(II)(Ph-terpy)Cl2, Mn(II)(mesityl-terpy)Cl2, and an organic-soluble di-mu-oxo di-aqua dimanganese complex, [Mn(III/)(IV)2(mu-O)2(mesityl-terpy)2(OH2)2](NO3)3, were obtained and characterized by X-ray crystallography. Solutions of the in situ-formed di-mu-oxo dimanganese complexes were characterized by electrospray mass spectrometry, EPR spectroscopy, and UV-visible spectroscopy, and the rates of catalytic oxygen-evolving activity were assayed. The use of Mn(II)LCl2 precursors leads to higher product purity of the Mn dimers while achieving the 1:1 ligand to Mn stoichiometry appropriate for catalytic activity assay. These methods can be used to screen the catalytic activity of other di-mu-oxo dimanganese complexes generated by using a ligand library.     

Probing the catalytic potential of chloro nitrosyl rhenium(I) complexes

The reduction of the mononitrosyl Re(II) salt [NMe(4)](2)[ReCl(5)(NO)] (1) with zinc in acetonitrile afforded the Re(i) dichloride complex [ReCl(2)(NO)(CH(3)CN)(3)] (2). Subsequent ligand substitution reactions with PCy(3), PiPr(3) and P(p-tolyl)(3) afforded the bisphosphine Re(i) complexes [ReCl(2)(NO)(PR(3))(2)(CH(3)CN)] (3, R = Cy a, iPr b, p-tolyl c) in good yields. The acetonitrile ligand in 3 is labile, permitting its replacement with H(2) (1 bar) to afford the dihydrogen Re(I) complexes [ReCl(2)(NO)(PR(3))(2)(η(2)-H(2))] (4, R = Cy a, iPr b). The catalytic activity of 2, 3 and 4 in hydrogen-related catalyses including dehydrocoupling of Me(2)NH·BH(3), dehydrogenative silylation of styrenes, and hydrosilylation of ketones and aryl aldehydes were investigated, with the main focus on phosphine and halide effects. In the dehydrocoupling of Me(2)NH·BH(3), the phosphine-free complex 2 exhibits the same activity as the bisphosphine-substituted systems. In the dehydrogenative silylation of styrenes, 3a and 4a bearing PCy(3) ligands exhibit high catalytic activities. Monochloro Re(I) hydrides [Re(Cl)(H)(NO)(PR(3))(2)(CH(3)CN)] (5, R = Cy a, iPr b) were proven to be formed in the initiation pathway. The phosphine-free complex 2 showed in dehydrogenative silylations even higher activity than the bisphosphine derivatives, which further emphasizes the importance of a facile phosphine dissociation in the catalytic process. In the hydrosilylation of ketones and aryl aldehydes, at least one rhenium-bound phosphine is required to ensure high catalytic activity.     

Rhenium oxo complexes of a chelating diyne ligand. Synthesis and study of the kinetics of protonation

A series of oxo complexes, Re(O)X(diyne) (X = I, Me, Et), have been prepared from 2,7-nonadiyne and Re(O)I(3)(PPh(3))(2). Addition of B(C(6)F(5))(3) to Re(O)I(2,7-nonadiyne) (5) results in coordination of the oxo ligand to the boron. The protonation of Re(O)(X)(2-butyne)(2) and Re(O)(X)(2,7-nonadiyne)(2) with a variety of acids has been examined. With 5 and HBF(4)/Et(2)O, the ultimate product was [Re(CH(3)CN)(3)(I)(2,7-nonadiyne)](2+) (7). The conversion of 5 to 7 changes the conformation of the diyne ligand from a "chair" to a "boat" and shifts its propargylic protons considerably downfield in the (1)H NMR. The kinetics of the protonation of Re(O)I(2,7-nonadiyne) (5) by CF(3)SO(3)H in CH(3)CN have been monitored by visible spectroscopy, in a stopped-flow apparatus, and by low temperature (1)H NMR. Two second-order rate constants, presumably successive protonations, were observed in the stopped-flow, k(1) = 11.9 M(-)(1) s(-)(1) and k(2) = 3.8 M(-)(1) s(-)(1). Low temperature (1)H NMR spectroscopy indicated that the resulting solution contained a mixture of two doubly protonated intermediates X and Y, each of which slowly formed the product 7 via an acid-independent process.     

Reactivity of [Re[kappa(3)-H(mu-H)B(tim(Me))(2)](CO)(3)] (tim(Me) = 2-mercapto-1-methylimidazolyl) toward neutral substrates

The complex [Re[kappa(3)-H(mu-H)B(tim(Me))(2)](CO)(3)] (2a) (tim(Me) = 2-mercapto-1-methylimidazolyl) reacts with a variety of neutral substrates to afford new complexes featuring the dihydrobis(2-mercapto-1-methylimidazolyl)borate coordinated in a bidentate or unidentate fashion. By treating 2a with unidentate ligands, the mononuclear complexes [Re[kappa(2)-H(2)B(tim(Me))(2)](CO)(3)(L)] (L = imidazole (5), 4-(dimethylamino)pyridine (6), tert-butylisonitrile (7), triphenylphosphine (8)) were formed, upon replacement of the agostic B-H...Re bond by the correspondent unidentate ligand. With potentially bidentate substrates, 2a is transformed into mononuclear or dinuclear complexes, depending on the atom donor set of the reacting substrates. Reaction of compound 2a with ethylenediamine (en) gave the complex [Re[kappa(1)-H(2)B(tim(Me))(2)](CO)(3)(en)] (9), because of cleavage of the agostic interaction, dechelation of one mercaptoimidazolyl ring, and bidentate coordination of the amine. By contrast, 1,2-bis(diphenyl)phosphinoethane (dppe) is not able to replace the mercaptoimidazolyl ring, and the dimer [Re[kappa(2)-H(2)B(tim(Me))(2)](CO)(3)](2)(mu-dppe) (10) was formed. The novel Re(I) tricarbonyl complexes (5-10) have been fully characterized, including by X-ray diffraction analysis in the case of 6, 8, 9, and 10. The X-ray diffraction study confirmed the unprecedented unidentate coordination mode of the dihydrobis(2-mercapto-1-methylimidazolyl)borate in complex 9.