一种具有声低通滤波特性的无源零差光纤水听器

报道了一种新颖的具有抗混叠功能的无源零差迈克耳孙型光纤水听器.它由一个普通的芯轴型光纤水听器和一个圆柱型亥姆霍兹共振器构成.在驻波罐中对其声压相位灵敏度频响进行了测量,结果表明该光纤水听器具有较好的声低通滤波特性,能有效地抑制声信号中的高频成分,从而实现抗混叠滤波.该光纤水听器的低频声压相位灵敏度主要由传感光纤长度和弹性增敏层的物理特性决定,约为-159 dB(0 dB=1 rad/μPa).在1150 Hz附近出现了一个共振峰,这主要由圆柱型亥姆霍兹共振器的声学特性决定.1150～2280 Hz频段内的灵敏度衰减率约为50 dB/倍频程,1500 Hz以后的灵敏度衰减量大于10 dB.这对于提高我国未来声纳系统的抗干扰能力具有十分重要的意义.     

Visualization of acoustic radiation from a vibrating bowling ball.

This paper presents visualization of acoustic radiation from a vibrating bowling ball using the Helmholtz equation least squares (HELS) method. In conducting the experiments, the ball is excited by a vibration shaker using stationary random signals. The radiated acoustic pressures are measured using two microphones and taken as input to the HELS formulations. The reconstructed acoustic pressures on the bowling ball surface are compared with those measured at the same locations. Also shown are comparisons of the reconstructed and measured acoustic pressure spectra at various locations on the bowling ball surface. Results demonstrate that the accuracy of reconstruction based on measurements over a conformal surface is much higher than that over a finite planar surface. This is because the latter often extends beyond the near-field region, making the accuracy of measurements inconsistent. Nevertheless, satisfactory reconstruction of acoustic pressure fields over the entire bowling ball surface can still be obtained based on the measurements taken over a finite planar surface on one side of the source. In a similar manner, the normal component of the surface velocity is reconstructed. Once these acoustic quantities are determined, the time-averaged acoustic intensity is calculated. Also presented are the formulations for estimating a priori the numbers of expansion functions and measurements required by the HELS method and the guidelines for determining the reconstruction error and optimum measurement locations, given the overall dimensions of the source and the highest frequency of interest in reconstruction.     

Identification of dynamic loading on a bending plate using the Virtual Fields Method

This paper aims at identifying local dynamic transverse forces and distributed pressures acting on the surface of a thin plate, from its measured vibration response. It is related to previous work by other authors on the so-called Force Analysis Technique but uses a different formulation. The paper first presents the theoretical developments based on the Virtual Fields Method and then, numerically simulated data are processed to validate the identification algorithm. Finally, experimental data are used. Both mechanical point load excitation, and distributed acoustic excitation of a bending panel are considered. The force reconstruction results are very satisfactory and the low computational times together with the simple implementation make the Virtual Fields technique attractive for this type of problem.     

环形ZnO薄膜谐振器的横模抑制与测试分析

采用Tiersten方程研究了环形ZnO薄膜谐振器中横模寄生问题, 获得了环(圆)形薄膜谐振器的横模振动方程, 求得横模位移场解和频率色散方程; 然后采用电磁学模式合成理论进行分析, 发现环形薄膜谐振器横模频率与环形电极的内外径之比a/b有关, 振动模式可由圆形薄膜谐振器横模模式合成得到, 通过控制a/b能够抑制横模模式数和调控基膜频率. 采用外差激光干涉仪和网络矢量分析仪测量并比较了同批次的圆形和环形薄膜谐振器的上电极横模振动图样和电阻抗曲线. 振动图样显示环形薄膜谐振器振动模式可由半径为a和半径为b的圆形薄膜谐振器振动模式合成, 仅存在节圆数大于0的横模振动, 等于0的横模模式被抑制; 电阻抗曲线显示当a/b为0.436时, 环形薄膜谐振器的基频(约1217 MHz)和圆形的(0, 1)模式频率相等. 测量数据验证了模式合成理论的分析结果正确性, 为薄膜谐振器的横模抑制研究提供了理论基础和新方法.     

Measurements of the thermodiffusion ratio in a binary solution using an acoustic resonator

The nonlinear acoustic resonator filled with a layered solution is studied. The possibility of its application to measure liquid parameters is shown. The proposed acoustic method is based on the dependence of the speed of sound in a solution on its concentration which varies due to thermal diffusion in the beam propagation region. An analysis of the relations describing the resonator transmittance showed that, having measured the steady-state and minimum resonator transmittances, the thermodiffusion ratio in a binary solution filling the resonator can be determined.     

Application of piezoelectric transient response in transducer acoustic power measurement

To explore a more convenient method for measuring the focused ultrasound power,a piezoelectric ceramic plate was used to receive ultrasonic signal directly.Due to an acoustic force acts on the surface of piezoelectric ceramic plate,the piezoelectric response was obtained by means of electromechanical analogy,which was composed of voltage response caused by forced vibration and high frequency attenuation response caused by natural vibration.The conversion relationship between output signal of piezoelectric ceramic plate and acoustic power of transducer was analyzed.The envelope of output piezoelectric signal was extracted in twice,and a voltage amplitude curve with sinusoidal distribution that could describe the changes of acoustic power was obtained.Under different drive voltage of transducer,the maximum peak voltage of envelope curve was found respectively.Their squared values were made a linear fitting with acoustic power measured by acoustic power meter,and then the proportional coefficient of theoretical relational expression was calibrated.The experimental results are in good agreement with the theory.The relative error between calibrated theoretical acoustic power and that measured by acoustic power meter was less than 8.7%.The paper can provide a guideline for measuring acoustic power of transducer by using piezoelectric signal.     

磁致伸缩换能器辐射板形状对声场分布的影响

磁致伸缩换能器可作为热声制冷机的声源装置,辐射板的形状直接影响声压输出效率,从而影响制冷效果。为提高换能器工作效率、减小换能器体积,辐射板需在Terfenol-D棒的激励下产生大振幅、高频率的活塞振型。针对这一问题,应用ATILA软件分析了磁致伸缩换能器辐射板形状对谐振腔振动幅频特性的影响以及对谐振腔内声场分布的影响。结果表明:相同激励条件下,凹球面辐射板出现活塞振型时振幅最大,对应谐振腔中声压幅值最高;谐振腔端面形状为凹球面时,具有聚焦声压幅值的作用;端面形状为凹发射端-凸反射端组合的谐振腔内声压幅值最高。以上结论为合理设计辐射板、谐振腔两端面组合形状提供了参考。     

Acoustic dipole radiation model for magnetoacoustic tomography with magnetic induction

An acoustic dipole radiation model for magnetoacoustic tomography with magnetic induction (MAT-MI) is pro-posed,based on the analyses of one-dimensional tissue vibration,three-dimensional acoustic dipole radiation and acoustic waveform detection with a planar piston transducer.The collected waveforms provide information about the conductiv-ity boundaries in various vibration intensities and phases due to the acoustic dipole radiation pattern.Combined with the simplified back projection algorithm,the conductivity configuration of the measured layer in terms of shape and size can be reconstructed with obvious border stripes.The numerical simulation is performed for a two-layer cylindrical phantom model and it is also verified by the experimental results of MAT-MI for a tissue-like sample phantom.The proposed model suggests a potential application of conductivity differentiation and provides a universal basis for the further study of conductivity reconstruction for MAT-MI.     

Suppression of Helmholtz resonance using inside acoustic liner

When a Helmholtz resonator is exposed to grazing flow, an unstable shear layer at the opening can cause the occurrence of acoustic resonance under appropriate conditions. In this paper, in order to suppress the flow-induced resonance, the effects of inside acoustic liners placed on the side wall or the bottom of a Helmholtz resonator are investigated. Based on the one-dimensional sound propagation theory, the time domain impedance model of a Helmholtz resonator with inside acoustic liner is derived, and then combined with a discrete vortex model the resonant behavior of the resonator under grazing flow is simulated. Besides, an experiment is conducted to validate the present model, showing significant reduction of the peak sound pressure level achieved by the use of the side-wall liners. And the simulation results match reasonably well with the experimental data. The present results reveal that the inside acoustic liner can not only absorb the resonant sound pressure, but also suppress the fluctuation motion of the shear layer over the opening of the resonator. In all, the impact of the acoustic liners is to dampen the instability of the flow-acoustic coupled system. This demonstrates that it is a convenient and effective method for suppressing Helmholtz resonance by using inside acoustic liner.     

Modelling nonlinearity in piezoceramic transducers: From equations to nonlinear equivalent circuits

Quadratic nonlinear equations of a piezoelectric element under the assumptions of 1D vibration and weak nonlinearity are derived by the perturbation theory. It is shown that the nonlinear response can be represented by controlled sources that are added to the classical hexapole used to model piezoelectric ultrasonic transducers. As a consequence, equivalent electrical circuits can be used to predict the nonlinear response of a transducer taking into account the acoustic loads on the rear and front faces. A generalisation of nonlinear equivalent electrical circuits to cases including passive layers and propagation media is then proposed. Experimental results, in terms of second harmonic generation, on a coupled resonator are compared to theoretical calculations from the proposed model.     

Structure normal velocity reconstruction withsparse measurement points

To achieve normal velocity reconstruction of a vibrating surface with sparse measurement points, a reconstruction method is proposed by exploiting of acoustic radiation modes as expansion functions, which are capable of describing the geometric shape of a vibrating surface. Firstly, acoustic radiation modes of the vibrating surface are calculated and the relationship between normal velocity and acoustic radiation modes is built. Then actual measured normal velocity values are expressed by corresponding acoustic radiation modes and the expansion coefficients are calculated. Subsequently, all normal velocity values can be reconstructed by the obtained expansion coefficients. Experimental validations have been performed by a double-layer steel cylindrical shell with enclosed ends in.an anechoic water tank. Two cases with different wavenumber components distribution were designed by a vibration shaker and a rotor device respectively. Two experimental results both show that actual vibration distribution cannot be revealed exactly by the sparse measurement points, which corresponds to severe loss of vibration related wavenumber components. On the other hand, normal velocity and corresponding wavenumber components can be restored accurately in both two wavenumber components distribution cases according to the proposed method, which demonstrates obvious effectiveness of the proposed method.     

On optimal design of half-wave resonators for acoustic damping in an enclosure

Acoustic design parameters of a half-wave resonator are studied experimentally for purely acoustic tuning of the resonator. According to the standard acoustic-test procedures, acoustic-pressure signals in the model enclosure with the resonators are measured. Based on the signals, quantitative acoustic properties of damping factor and sound absorption coefficient are evaluated and thereby, the acoustic-damping capacity of the resonator is characterized. Sound absorption coefficient has the advantages of the damping factor in various aspects. The coefficient indicates clearly the tuning frequency of the resonator, absorption effectiveness as a function of frequency, and overall damping capacity. The diameter and the number of a half-wave resonator, its distribution, and the blockage ratio at its inlet are selected as design parameters for optimal tuning of the resonator in the model enclosure. The resonators with larger diameter have the advantage of those with smaller one with respect to purely acoustic damping at the tuning frequency. The optimum number of resonators or the optimum open-area ratio decreases as boundary absorption decreases. When the open-area ratio exceeds the optimum value, over-damping appears, leading to a decrease in peak absorption coefficient and a broadening of absorption bandwidth. Blockage at the resonator inlet controls both peak absorption coefficient and its absorption bandwidth and it can be considered one of design factors for acoustic tuning.     

水下圆柱形Helmholtz共振器的声学特性分析

理论分析了水下圆柱形Helmholtz共振器的声学特性. 综合考虑壁面弹性和辐射阻抗的影响,基于电-声类比的基本原理,建立了较为完善的水下圆柱形Helmholtz共振器的低频集中参量模型. 利用电路分析的基本方法,得到了系统的输入阻抗和声压传递函数表达式. 仿真分析了主要结构参数对共振器声学特性的影响,得出了一些有意义的结论. 在充水驻波罐中对自制的Helmholtz共振器进行了测量,并对实验结果进行了详细地误差分析. 去除压电水听器对测量结果的影响后,实验与仿真结果基本一致,从而验证了理论分析的正确性. 关键词： Helmholtz共振器 共振频率 传递函数 辐射阻抗     

Influence of resonators on the acoustic and propulsion performance characteristics of a ramjet ejector chamber under conditions with vibration hydrogen combustion

The influence of acoustic resonators on the acoustic and propulsion performance characteristics of a ramjet ejector chamber under conditions with vibration hydrogen combustion was experimentally examined. In the study, resonators having identical throats and different cavity diameters were used. For fixed-volume resonators the best propulsion performance characteristics were achieved in the case in which the cavity diameter differed little from the resonator throat diameter.     

Effective mass in quantum effects of radiation pressure

We study the quantum effects of radiation pressure in a high-finesse cavity with a mirror coated on a mechanical resonator. We show that the optomechanical coupling can be described by an effective susceptibility which takes into account every acoustic modes of the resonator and their coupling to the light. At low frequency this effective response is similar to a harmonic response with an effective mass smaller than the total mass of the mirror. For a plano-convex resonator the effective mass is related to the light spot size and becomes very small for small optical waists, thus enhancing the quantum effects of optomechanical coupling.     

压电瞬态响应在换能器声功率测量中的应用

探索一种简便的聚焦超声功率测量方法,利用压电陶瓷片直接接收超声信号,通过机电类比得到压电瞬态响应由压电片在声波作用力下引起受迫振动产生的电压响应与固有振动产生的高频衰减响应叠加而成,分析输出压电信号与换能器声功率之间的换算关系。对输出压电信号进行二次包络提取,获得表征声功率变化的电压幅度曲线,分别找出不同换能器驱动电压下包络曲线的最大峰值电压,将其平方值与声功率计所测声功率进行线性拟合,并对理论关系式中的比例系数进行标定。实验结果所得线性拟合度较高,且标定后所得声功率与声功率计所测值相对误差低于8.7%,证明了通过压电瞬态响应测量换能器声功率具有可行性。      

Generation of subharmonics in acoustic resonators containing bubbly liquids: A numerical study of the excitation threshold and hysteretic behavior

In this paper we study the generation and behavior of subharmonics in a bubbly liquid confined in an acoustic resonator, through numerical simulations carried out at finite-amplitude acoustic pressure. Several configurations in terms of resonator length and driving frequency are considered here. Our results show that these frequency components, created from a higher-frequency signal at the source (ultrasound), are due to the nonlinearity of the medium at high acoustic-pressure amplitude and to the configuration of the resonator (geometry and boundaries). We also show that they have an amplitude-threshold dependence, which is in concordance with the literature. The response of these subharmonics to different sequences of pressure amplitudes also reveals the hysteretic nature of the bubbly liquid.     

结构振动和声辐射的可控性和可观性指标

结构振动和声辐射的可控性和可观性指标对有源控制系统作动器/传感器的布置具有重要意义。对结构振动和声辐射的可控性和可观性指标进行了研究,提出了基于声压输出的振动模态可观性指标,在振动模态可控性和可观性指标的基础上,结合振动模态的声辐射效率,提出了结构声辐射的可控性和可观性指标和基于声压输出的可观性指标。以板结构为例,对结构振动和声辐射的可控性和可观性指标进行了计算分析和讨论,比较了基于声压输出和基于振动响应输出的振动模态可观性,重点研究了基于声压输出的振动模态可观性和结构振动及声辐射的可观性特点,最后对指标值在结构声有源控制中输入(输出)位置选择上的应用进行了讨论和比较,通过数值仿真对指标的有效性进行了验证。      

光声信号的声透镜层析成像研究

提出了一种用声透镜实现光声层析成像的新模式。从理论上计算出了声透镜的响应，测出了已知声场中标准物像面处的声场分布。考虑到圆形活塞振源的指向性，对代表物成像进行了理论修正，并与实验结果做了对比分析。研究表明，利用声透镜可以实现光声层析成像，并经图像重构得到了生物组织中异物的光声图像，横向、纵向分辨力较高。     

一种新型的水下低频共鸣器*

该文旨在宽开口的共鸣腔内嵌入聚氨酯泡沫来设计一种新型的水下低频共鸣器。首先通过水池实验测定聚氨酯泡沫板的声速。然后基于此建立镶嵌聚氨酯泡沫共鸣器的理论模型获得声阻抗率,通过与直口结构以及棒纵振动模型对比,验证理论模型的正确性,并建立集中参数系统,分析内嵌聚氨酯泡沫能够降低共鸣器共振频率的原因。最后通过有限元仿真软件进行计算,检验理论模型的正确性,与无聚氨酯泡沫镶嵌的共鸣器相比,镶嵌聚氨酯泡沫的共鸣器在维持较低品质因素的同时实现了共振频率大幅降低。