Sulfur K-Edge EXAFS Studies of Cadmium-, Zinc-, Copper-, and Silver-Rabbit Liver Metallothioneins

The structures of metal-thiolate clusters in Zn(7)-MT, Cd(7)-MT, Cu(12)-MT, Ag(12)-MT, and Ag(17)-MT from rabbit liver have been investigated by sulfur K-edge X-ray absorption spectroscopy (XAS). In addition to providing metal-cysteinyl sulfur bond lengths, the sulfur K-edge EXAFS data provide the first direct evidence for mixtures of bridging and terminal sulfurs in Cu-MT and Ag-MT. The Zn-S and Cd-S bond lengths for tetrahedrally coordinated Zn(4)(SPh)(10)(2-) and Cd(4)(SPh)(10)(2-) compounds obtained from sulfur K-edge EXAFS data are 2.35 +/- 0.03 and 2.52 +/- 0.02 ?, respectively. Zn-S and Cd-S bond distances of 2.34 +/- 0.03 ? for Zn(7)-MT and 2.54 +/- 0.02 ? for Cd(7)-MT, respectively, calculated from sulfur K-edge EXAFS measurements, are consistent with the previously reported results from metal K-edge EXAFS data. Analysis of the sulfur K-edge EXAFS data for Cu(12)-MT indicates that Cu(I) is trigonally coordinated to sulfurs at a distance of 2.25 +/- 0.01 ?. Significant changes in CD spectra observed between Ag(12)-MT 1 and Ag(17)-MT 1 indicate that the modification of the three-dimensional structure occurs when Ag(17)-MT 1 is formed from Ag(12)-MT 1 as Ag(I) is added to the Ag(12)-MT 1. The Ag-S bond distances of 2.45 +/- 0.02 and 2.44 +/- 0.03 ? in Ag(1)(2)-MT 1 and Ag(1)(7)-MT 1, respectively, calculated from the sulfur K-edge EXAFS measurements, lead us to conclude that the Ag(I) in both Ag(1)(2)-MT 1 and Ag(1)(7)-MT 1 is digonally coordinated by thiolates. The number of metals bonded to sulfur in both model compounds and metal-containing metallothioneins is estimated from sulfur K-edge EXAFS measurements to be in the range 1.2-1.7, depending on the fraction of bridging sulfurs present in compounds. Unlike the spectral data recorded during Cu(I) binding, where sharp changes take place past 12 Cu(I), the CD data for Ag-MT 1 show little variation over the entire range of Ag(I):MT molar ratios. This result, established by both low- and high-energy optical methods, suggests that the three-dimensional structure of the metal-binding sites in metallothioneins is strongly influenced by the fraction of bridging sulfur. This analysis is the first to provide direct support for the presence of a clustered Ag-S structure for the Ag(17)-MT 1 species. These data also suggest that the structures in Ag(I) and Cu(I) metallothioneins are probably quite different.     

Reversible shrinkage and expansion of a blue photofluorescent cadmium coordination polymer and in situ tetrazole ligand synthesis

The metal-organic framework [Cd15(5MT)18(OH)4(SO4)4] (5-MT = 5-methyl-1H-tetrazole) with an unprecedented Cd(3)(micro3-OH)(micro3-SO4) core and two kinds of tetrazole coordination modes was formed by self-assembly and in situ synthesis of the 5-MT tetrazole ligand; the structure exhibits an unusual 3(9) x 4(12) x 5(15) topological network and shows reversible shrinkage and expansion in a crystal-to-crystal dehydration/rehydration process.     

Synthesis and characterization of {Ni(NO)}10 and {Co(NO)2}10 complexes supported by thiolate ligands

Nitric oxide is an important molecule in biology and modulates a variety of physiological and pathophysiological processes. Some of its regulatory functions are exerted through interactions with redox-active elements, including iron, nickel, cobalt, and sulfur. Metalloenzymes containing [ nFe- nS] ( n = 2 or 4) clusters can be activated or inactivated by reaction with NO, affording dinitrosyl iron complexes. Studies of the NO chemistry of small-molecule iron thiolate complexes have provided insight into these biological processes and suggested probable intermediates. To explore this chemistry from a different perspective, we prepared nickel and cobalt thiolate complexes and investigated their reactions with NO and related compounds. We report here the first examples of anionic complexes containing {Ni(NO)} (10) and {Co(NO) 2} (10) units, the reactivity of which suggests possible intermediates in the interconversion of iron thiolate nitrosyl compounds. Our results demonstrate new chemistry involving NO and simple complexes of nickel and cobalt supported by thiolates, which have been known for more than 30 years. The use of mass balance methodology was key to their discovery. Among the novel complexes reported are (Et 4N) 2[Ni(NO)(SPh) 3] ( 2), from (Et 4N) 2[Ni(SPh) 4] ( 1) and NO, (Et 4N) 2[Ni 2(NO) 2(mu-SPh) 2(SPh) 2] ( 3), from 1 and NO (+) or 2 and Me 3O (+), (Et 4N)[Co(NO) 2(SPh) 2] ( 5), from (Et 4N) 2[Co(SPh) 4] ( 4) and NO, and [Co 3(NO) 6(mu-SPh) 3] ( 6), from 5 and Me 3O (+). In the syntheses of 2 and 5, NO could be replaced by the convenient solid Ph 3CSNO.     

Cyclic voltammetry study of the peptide Lys-Cys-Thr-Cys-Cys-Ala [56-61] MT i in the presence of cadmium

The electrochemical study of the peptidic fragment Lys-Cys-Thr-Cys-Cys-Ala [56–61] MT I (FT) alone and in the presence of cadmium was performed, by cyclic voltammetry using a hanging mercury drop electrode, in order to enable comparisons between the behavior of Cd, Zn metallothioneins and that of this less complex molecule, intrinsic to the metallothionein structure. The influence of the equilibration time, of the scan rate, and of the solution pH was investigated. The influence of the addition of cadmium with different Cd–FT ratios was also studied. Samples containing both Cd and FT give complex voltammograms showing different peaks. Several electrochemical systems were distinguished: the mercury electrode itself is involved in the charge transfer step in the presence of thiol groups coming from the FT structure; another system can be attributed to the oxido-reduction of cadmium either as free ion or complexed by the peptide. The adsorption phenomena play an important role in the electrochemical process. Both dissolved and adsorbed species are electroactive.     

XAFS study of the complex of an acetylacetonate-based ligand and copper ion

An X-ray absorption fine structure (XAFS) study has been conducted to reveal the local structure and chemical state of the copper in the complex of an acetylacetonate-based ligand (L1) and copper ion in acetonitrile solution. The copper ion in the complex was found to be divalent from the Cu K-edge X-ray absorption near-edge structure (XANES) spectrum. The FEFF (ab initio multiple scattering calculations of XAFS) were performed with the model compounds, whose structures were optimized by using MOPAC program with AM1 Hamiltonian. The comparative study of the experimental XAFS spectra and theoretical calculations from FEFF gave the perspectives for clarifying the coordination structure of the complex of L1 and copper ion.     

Unique formation of a pentanuclear lanthanum(III) thiolate oxide cluster via control of hydrolysis

The reaction of [(TMS)2N]3La(mu-Cl)Li(THF)3 (1) and HSPh produced a bimetallic complex [{(TMS)2N}2La(THF)]2(mu-SPh)(mu-Cl)] (2). Compound [{(TMS)2N}2La5O(SPh)10LiCl2(THF)6] (3) was prepared by control of the hydrolysis of 2 and LiCl or 1 and HSPh with the proper amount of water. 1 was treated first with 1/6 equiv of H2O and then with equimolar HSPh; a polymeric complex [{(TMS)2N}2(mu-SPh)La(mu-SPh)Li(THF)2](infinity) (4) was isolated. 3 contains a central [(mu-SPh)4(mu3-SPh)2{La(THF)}4(mu3-O)]4+ tetrahedral fragment in which two La atoms are linked by a pair of mu-SPh- and mu3-Cl- ligands to a [{(TMS)2N}2La]+ fragment, while the other two are bridged by two mu-SPh- ligands to a [Li(THF)2]+ fragment, forming a bee-shaped structure.     

Mechanism of the reactions of synthetic Fe-S-based clusters with PhCOCl: parallel pathways involving free and coordinated thiolate as nucleophiles

Terminal thiolate ligands on the synthetic Fe-S-based clusters [Fe4S4(SR)4]2- (R = Et or SPh) or [{MoFe3S4(SPh)3}2(mu-SPh)3]3- are replaced by chloride in a reaction with PhCOCl to produce [Fe4S4Cl4]2- and [{MoFe3S4Cl3}2(mu-SPh)3]3-, respectively. Kinetic studies using stopped-flow spectrophotometry show that, in general, the mechanisms of these reactions in MeCN occur by two pathways. One pathway is independent of the concentration of PhCOCl and involves rate-limiting dissociation of the thiolate ligand. The free thiolate subsequently reacts with PhCOCl to produce PhCOSR and the Cl- which binds to the vacant site on the cluster. The second pathway exhibits a nonlinear dependence on the concentration of PhCOCl and involves initial, rapid binding of PhCOCl to the cluster followed by intramolecular thiolate ligand attack on the coordinated acid chloride. The intermediate in which PhCOCl is bound to the cluster has been detected spectrophotometrically. The ways in which the rates of the reactions between PhCOCl and Fe-S-based clusters are affected by changes of the terminal thiolate, the metal composition of the cluster core, and the protonation state of the cluster have been investigated and are compared with the effect these same changes have on the rates of nucleophilic substitution.     

簇合物裂解法合成二硫纶化合物

以[Me₄N]₂[M₄(SPh)₁₀]和[Me₄N]₄[S₄M₁₀(SPh)₁₆](M=Cd,Zn)为前驱体,采用簇合物裂解法合成了配合物(Bu₄N)₂[Cd(mnt)₂]、(Bu₄N)₂[M(dmit)₂](M=Cd,Zn)以及双核配合物(Me₄N)₂[Zn₂(Sph)₂·(S₂TTF(SCH₂)₂)₂].运用PM3计算方法得到了各种二硫纶盐配体中硫负离子的静电荷大小关系:mnt^2->SPh^->dmit^2->[(MeS)₂TTFS₂]^2-≈[(CH₂S)₂TTFS₂]^2-.在理论计算及实验结果的基础上,探讨了配体上硫负离子的静电荷大小与反应产物间的关系.     

Ligating properties of a potentially tetradentate Schiff base [(CH3)2NCH2CH2N=CHC6H3(OH)(OMe)] with zinc(II), cadmium(II), cobalt(II), cobalt(III) and manganese(III) ions: synthesis and structural studies

A series of Zn(II), Cd(II), Co(II), Co(III) and Mn(III) complexes with the Schiff base [(CH3)2NCH2CH2N=CHC6H3(OH)(OMe)], LH, derived from 2-dimethylaminoethylamine and o-vanillin, has been synthesised and structures of all the products have been established by X-ray crystallography. In the cases of zinc and cadmium, dimeric complexes [Zn(LH)2(NCS)] [Zn2(L)(mu(1,1)-CH3COO)(NCS)3] (1), [Cd2(L)2(Cl)2] (2) and [Cd2(L)2(NCS)2] (3), and for cobalt and manganese, monomeric complexes [Co(LH)2(NCS)]2 [Co(NCS)4] (4), [Co(LH)2(NCS)]ClO4 (5), [Co(L)(N3)(o-vanillinate)] x 0.5 MeOH (6) and [Mn(LH)2(MeOH)2](ClO4)3 (7), are formed with various terminal ligands. All the complexes have been characterised by elemental analysis and IR spectra. UV-Vis and NMR spectroscopy, magnetic, and electrochemical studies, were also carried out where feasible. The Schiff base functions as a bi-, tri- or tetra-dentate chelating agent and coordinates via the protonated or deprotonated phenolic oxygen, amine and imine nitrogens, and only in case of 1 with the methoxy oxygen atoms, to the metal ion leading to the formation of mono- or bi-metallic complexes.     

Bis(mercaptoimidazolyl)(pyrazolyl)hydroborato complexes of zinc, cadmium, and cobalt: structural evidence for the enhanced tendency of zinc in biological systems to adopt tetrahedral M[S4] coordination

The bis(2-mercapto-1-methylimidazolyl)(pyrazolyl)hydroborato derivatives [pzBmMe]2Zn, [pzBmMe]2Co, and [pzBmMe]2Cd have been isolated and structurally characterized by X-ray diffraction. Despite their common [pzBmMe]2M composition, each of these complexes adopts a different structure. Thus, (i) the zinc complex exhibits a tetrahedral Zn[S4] structure in which only the sulfur donors coordinate to zinc, (ii) the cobalt complex exhibits a trigonal-bipyramidal Co[S3NH] structure in which one of the pyrazolyl groups and one of the B-H groups coordinate to cobalt, and (iii) the cadmium complex exhibits a six-coordinate Cd[S4H2] structure in which both B-H groups interact with the cadmium center. These comparisons emphasize that zinc has a greater preference for tetrahedral M[S4] coordination than does either cobalt or cadmium, an observation that is in accord with the prevalent role of zinc in the structural sites of enzymes.     

金属硫蛋白MT-2a与Cd(Ⅱ)和Cu(Ⅰ)络合的电喷雾质谱表征

采用电喷雾质谱法(ESI-MS)研究金属硫蛋白(MT,存在α和β两种结构域)-2a与金属离子Cd和Cu的络合作用.MT-2a由反相色谱分离纯化制得,并以电喷雾质谱鉴别.通过ESI-MS考察MT-2a与不同量的Cd和Cu的络合,结果表明,Cd能够优先与MT的α结构域络合,形成M2+4S11结构,并且该络合过程存在着明显的协同效应;Cd与MT的β结构域的络合形式为M2+4S9,其呈现出明显的随机松散络合特性;Cu优先与MT的β结构域络合,其络合形式由Cu4逐渐过渡到更高结合态;在Cu含量较高的条件下,Cu与MT呈现出多种络合方式.     

Trapping of hemiquinone radicals at Mo and P sites by phosphide-bridged dimolybdenum species: chemistry of complexes [Mo2(eta5-C5H5)2(OC6H4OH)(mu-PR2)(CO)4] and [Mo2(eta5-C5H5)2{mu-PR(OC6H4OH)}(CO)4]- (R = Cy, Ph)

The phosphide-bridged dimolybdenum complexes (H-DBU)[Mo2Cp2(mu-PR2)(CO)4] (R= Cy, Ph; DBU = 1,8-diazabicyclo[5.4.0.]undec-7-ene) react with p-benzoquinone to give the hemiquinone complexes [Mo(2)Cp2(OC6H4OH)(mu-PR2)(CO)4]. The latter experience facile homolytic cleavage of the corresponding Mo-O bonds and react readily at room temperature with HSPh or S2Ph2 to give the thiolate complexes [Mo2Cp2(mu-PCy2)(mu-SPh)(CO)4] or [Mo2Cp2(mu-PR2)(mu-SPh)(CO)2]. In contrast, PRH-bridged substrates experience overall insertion of quinone into the P-H bond to give the anionic compounds (H-DBU)[Mo(2)Cp2{mu-PR(OC6H4OH)}(CO)4], which upon acidification yield the corresponding neutral hydrides. The cyclohexyl anion experiences rapid nucleophilic displacement of the hemiquinone group by different anions ER- (ER = OH, OMe, OC4H5, OPh, SPh) to give novel anionic compounds (H-DBU)[Mo2Cp2{mu-PCy(ER)}(CO)4], which upon acidification yield the corresponding neutral hydrides. The structure of four of these hydride complexes [PPh(OC6H4OH), PCy(OH), PCy(OMe), and PCy(OPh) bridges] was determined by X-ray diffraction methods and confirmed the presence of cis and trans isomers in several of these complexes. In addition, it was found that the hydroxyphosphide anion [Mo2Cp2{mu-PCy(OH)}(CO)4]- displays in solution an unprecedented tautomeric equilibrium with its hydride-oxophosphinidene isomer [Mo2Cp2(mu-H){mu-PCy(O)}(CO)4]-.     

A novel cadmium aminophosphonate: X-ray powder diffraction structure, solid-state IR and NMR spectroscopic determination of the fine structure of the organic moieties

A new divalent cadmium phosphonate, Cd2Cl2(H2O)4(H2L), has been synthesized from the ethylenediamine-N,N'-bis(methylenephosphonic acid) (H4L). The obtained microcrystalline compound has been characterized by solid-state IR spectra and 13C, 31P, and 113Cd CP MAS NMR. The static 13P NMR spectra have been also recorded to give the delta11, delta22, and delta33 chemical shift parameters for both compounds. The spectral data, collected for Cd2Cl2(H2O)4(H2L), are in an agreement with its X-ray powder diffraction structure solved with the cell dimensions a = 16.6105(10), b = 7.1572(4), and c = 6.8171(4) A and beta = 98.327(4) degrees. The octahedral coordination sphere of the cadmium atoms consists of two phosphonate oxygen atoms, two water oxygen atoms, and the two chlorine atoms. Cadmium atoms are bridged by the chlorine atoms forming four-membered rings. The phosphorus atoms exhibit a tetrahedral coordination with two oxygen atoms bonded to the cadmium atoms with P-O distances of 1.503(10) and 1.504(10) A. The third oxygen atom, showing a longer P-O distance (1.546(9) A), is not bonded to the metal center, nor is it bonded to a proton. The combined IR and NMR proton-phosphorus cross-polarization kinetic data together with the X-ray data confirm that the cadmium phosphonate has the zwitterionic structure (NH2(+)CH2P(O2Cd2)O-) similar to the initial aminophosphonic acid H4L.     

Thermolysis preparation of cadmium(II) oxide nanoparticles from a new three-dimensional cadmium(II) supramolecular compound

The reaction of cadmium(II) chloride and 4-pyridine carboxylic acid (4-Hpyc) produces a new threedimensional supramolecular compound [Cd(4-pyc)₂(H₂O)4] _n (1). Compound 1 is characterized by IR spectroscopy and elemental analyses. The single crystal X-ray data show an infinite three-dimensional structure formed by the hydrogen bonding and π-π stacking interactions. The CdO nanoparticles are obtained by direct calcination at 400°C, 500°C and 600°C in the air atmosphere as well as by thermolysis in oleic acid at 200°C. The obtained cadmium(II) oxide nanoparticles are characterized by X-ray diffraction and scanning electron microscopy. This study demonstrates another potential application of cadmium(II) supramolecular compounds in the preparation of nanoscale cadmium(II) oxide materials with a specific size and morphologies.     

Triple-stranded helicates of zinc(II) and cadmium(II) involving a new redox-active multiring nitrogenous heterocyclic ligand: synthesis, structure, and electrochemical and photophysical properties

The protonated form [H(2)(L)](CF(3)SO(3))(2) (1) of a new redox-active bis-bidentate nitrogenous heterocyclic ligand, viz., 3,3'-dipyridin-2-yl[1,1']bi[imidazo[1,5-a]pyridinyl] (L), and its zinc(II) and cadmium(II) complexes (2 and 3) have been synthesized and characterized by single-crystal X-ray diffraction analysis. In the solid state, both 2 and 3 have triple-stranded helical structures involving ligands that experience twisting and bending to the extent needed by the stereoelectronic demand of the central metal ion. The metal centers in the zinc(II) complex [Zn(2)(L)(3)](ClO(4))(4) (2) are equivalent, each having a distorted octahedral geometry, flattened along the C(3) axis with a Zn1···Zn1# separation of 4.8655(13) ?. The cadmium complex [Cd(2)(L)(3)(H(2)O)](ClO(4))(4) (3), on the other hand, has a rare type of helical structure, showing coordination asymmetry around the metal centers with a drastically reduced Cd1···Cd2 separation of 4.070 ?. The coordination environment around Cd1 is a distorted pentagonal bipyramid involving a N(6)O donor set with the oxygen atom coming from a coordinated water, leaving the remaining metal center Cd2 with a distorted octahedral geometry. The structures of 2 and 3 also involve anion-π- and CH-π-type noncovalent interactions that play dominant roles in shaping the extended structures of these molecules in the solid state. In solution, these compounds exhibit strong fluxional behavior, making the individual ligand strands indistinguishable from one another, as revealed from their (1)H NMR spectra, which also provide indications about these molecules retaining their helical structures in solution. Electrochemically, these compounds are quite interesting, undergoing ligand-based oxidations in two successive one-electron steps at E(1/2) of ca. 0.65 and 0.90 V versus a Ag/AgCl (3 M NaCl) reference. These molecules are all efficient emitters in the red and blue regions because of ligand-based π*-π fluorescent emissions, tuned appropriately by the attached Lewis acid centers.     

Crystal structure and quantum chemical investigation of [Cd(NTO)_4Cd(H_2O)_6]·4H_2O

The common explosives, RDX (1,3,5-trinitro-1,3,5-triazacyclohexane), HMX (1,3,5,7- tetranitro-1,3,5,7-tetraazacyclooctane) and TNT (trinitrotoluene), were considered adequately for all weapons applications. Due to many catastrophic explosions resulting from unintentional initia-tion of impact, friction or shock, these explosives have become less attractive. TATB (1,3,5-tria- mino-2,4,6-trinitrobenzene) is noted for its insensitivity, however, it does not have the energetic performance of e…     

Crystal structure and luminescence of two cadmium 3,4,5-trimethoxylbenzoate complexes

Two novel cadmium complexes with TMB (HTMB = 3,4,5-trimethoxybenzoic acid) are synthesized by the solution evaporation method. The structure and luminescent property of the two complexes are characterized by single crystal and powder X-ray diffraction, FT-IR spectroscopy, and photoluminescence emission spectra. Cd₂(TMB)₄(H₂O)₄·H₂O (1) is a binuclear complex containing two Cd ions at a distance of 4.091 Å, both coordinated in octahedral geometry. Along the [100] direction, a 1D chain linked by intermolecular hydrogen bonds is formed. Cd(TMB)₂(IM) (H₂O)₂ (2) is a mononuclear complex in which the Cd ion coordination can be described as a distorted pentagonal bipyramid, and weak hydrogen bonding interactions are present in its molecule. The fluorescent measurement shows that both complexes exhibit strong emission in the solid state at room temperature. Powder X-ray diffraction confirmed their crystallinity and purity.     

Synthesis and spectral characterization of zinc(II) and cadmium(II) complexes of acetone-N(4)-phenylsemicarbazone: Crystal structures of acetone-N(4)-phenylsemicarbazone and a cadmium(II) complex

Seven Zn(II) and Cd(II) complexes of ON donor acetone-N(4)-phenylsemicarbazone (HL) have been synthesized and physico-chemically characterized by partial elemental analyses, molar conductance measurements, infrared, electronic and ¹H NMR spectral studies. The semicarbazone binds the metal as a neutral bidentate ligand in all the complexes. The crystal structures of acetone-N(4)-phenylsemicarbazone and [Cd(HL)₂Cl₂] have been determined by X-ray diffraction studies. The coordination geometry around cadmium(II) in the complex [Cd(HL)₂Cl₂] is distorted octahedral.     

Syntheses of triazole-bridged cadmium coordination polymer with luminescence properties

A novel triazole-bridged cadmium 1D coordination polymer, [Cd(Admtrz)Cl₂] _n (I) (Admtrz = 3,5-dimethyl-4-amino-1,2,4-triazole), has been synthesized under hydrothermal conditions and structurally characterized by elemental analysis, IR spectra, and single-crystal X-ray diffraction. Complex I was constructed from μ₂-Cl, μ₃-Cl, and triazole bridging modes. It exhibits a strong blue fluorescence emission band in the solid state at ambient temperature.     

Electrospray mass spectrometry of

There has been a substantial growth in the application of mass spectrometry (MS) methods for the analysis of inorganic materials, due to the inherent sensitivity of mass spectrometry ionization to the specific composition and structure of the analyzed materials. To date, few mass spectrometry studies have focused on metal-chalcogenide materials, an important class of semiconductor materials at the nanoscale, that exhibit interesting optical and electronic properties as a function of size. In this study, we report the application of a correlated electrospray mass spectrometry (ESMS) study between negative-ion and positive-ion mode under low-cone voltage to probe size, composition, and stability of metal-chalcogenide materials at the <1 nm scale. This correlation approach provides insight into the ionization behavior and thermodynamic stability of clusters in the <1.0 nm size domain of the form [Zn4(SPh)10][Me4N]2, [Cd4(SPh)10][Me4N]2, [E4Zn10(SPh)16][Me4N]4, [E4Cd10(SPh)16][Me4N]4 (E = S, Se). It is demonstrated that application of low-cone voltage ESMS can be a useful technique for the rapid analysis of intact solid state nanomaterials when both negative and positive ionic modes are analyzed, with a potential for extrapolation to other classes of nanoscale materials.