Rheology and crystallization behavior of asymmetric PLLA/PDLA blends based on linear PLLA and PDLA with different structures

In this study, several asymmetric poly(L‐lactide)/poly(D‐lactide) (PLLA/PDLA) blends were prepared by adding small amounts of PDLA with different structures into linear PLLA matrix. The effect of PDLA on rheological behavior, crystallization behavior, nucleation efficiency and spherulite growth of PLLA was investigated. Rheological results indicated that PLLA/PDLA blends showed solid‐like viscoelastic behavior at low temperature (<200°C), and the cross‐linking density of PLLA/PDLA melt at 180°C followed the order: PLLA/6PDLA > PLLA/L‐PDLA > PLLA/3PDLA > PLLA/4PDLA. No‐isotherm and isotherm crystallization results indicated that the crystallization capacity of PLLA/PDLA blends was strongly related to the PDLA structure, crystallization temperature and thermal treatment temperature. Furthermore, the dimension of crystal growth during isotherm crystallization presented the obvious dependent on the PDLA structure. The nucleation efficiency of sc‐crystallites in the blends and spherulite density during isothermal crystallization were also studied. Nucleation efficiency of sc‐crystallites in the PLLA/S‐PDLA blends showed the obvious dependent on thermal treatment temperature with respect to PLLA/L‐PDLA, and nucleation efficiency sc‐crystallites in the PLLA/S‐PDLA blends first decreased and then increased as the thermal treatment temperature increased. Spherulite density of PLLA/PDLA blends was also related to thermal treatment temperature and the PDLA structure. This study has discussed the temperature dependence of the stereocomplex networks between PLLA and PDLA with different structure, and then its consequential influence on rheology and crystallization capacity of PLLA, which would provide the theoretical direction for PLA processing. Copyright © 2016 John Wiley & Sons, Ltd.     

The morphology and growth of PLA stereocomplex in PLLA/PDLA blends with low molecular weights

The linear poly(L-lactide) and poly(D-lactide) (PLLA, PDLA) with relative lower molecular weights were synthesized, and PLLA/PDLA blends at various content of PDLA were prepared by solution casting. The morphology and growth of poly(lactide) stereocomplex (PLA SC) were investigated by polarized optical microscope. Results revealed that the morphology of SC in the blends strongly depended on the content of PDLA and the annealing temperature. Dendritic and irregular SC with looser structure developed in the specimens with lower content of PDLA, and regular SC spherulites with birefringent and compact structure produced in the specimens with higher content of PDLA. The growth rate (G) of SC increased gradually as the content of PDLA enhanced in the blends. As the annealing temperature enhanced, the SC with brighter and more compact structure appeared. The G value increased at first before declining as the annealing temperature elevated from the 130 to 190°C. And the nonlinear behavior of the growth of SC in the dissimilar specimens was analyzed.     

Properties of crosslinked polylactides (PLLA & PDLA) by radiation and its biodegradability

Crosslinked materials derived from poly(lactide) (PLA) have been produced by radiation modification in the presence of a suitable crosslinker (triallyl isocyanurate) (TAIC). The crosslinking structure introduced in PLA films has not only much improved the heat stability but also their mechanical properties. The properties of crosslinked samples are governed by crosslinking density and these improvement seemed to increase with radiation dose. This implied that the three dimensional networks have been introduced in material by radiation and the crosslinking density depended on the structure and length of PLA chains. Biodegradability of PLA was also determined by an enzymatic degradation test and burying in compost at 55 °C. Differing with PLLA, PDLA was insignificantly degraded by proteinase K. The degradation rate of PLA in compost was postponed with the introduction of crosslinks.     

Enhancing crystallization behavior for optimized performances of poly(TMC‐b‐(LLA‐ran‐GA)) by PDLA/PLLA stereocomplex crystallization

The blends of poly(1,3‐trimethylene carbonate‐b‐(l ‐lactide‐ran‐glycolide)) (PTLG) with poly(d ‐lactide) (PDLA) were prepared via solution‐casting method using CH₂Cl₂ as solvent. The poly(l ‐lactide) (PLLA) segments of PTLG with PDLA chain constructed as stereocomplex structures and growth stereocomplex crystals of PLA (sc‐PLA). The effects of sc‐PLA crystals on thermal behavior, mechanical properties, thermal decomposition of the PTLG/PDLA blends were investigated, respectively. The differential scanning calorimetry (DSC) and wide‐angle X‐ray diffraction (WAXD) results showed that the total crystallinity of the PTLG/PDLA blends was increased with the PDLA content increasing. Heterogeneous nucleation of sc‐PLA crystals induced crystallization of the PLLA segments in PTLG. The crystallization temperature of samples shifted to 107.5°C for the PTLG/PDLA‐20 blends compared with that of the PTLG matrix, and decreased the half‐time of crystallization. The mechanical measurement results indicated that the tensile strength of the PTLG/PDLA blends was improved from 21.1 MPa of the PTLG matrix to 39.5 MPa of PTLG/PDLA‐20 blends. The results of kinetics of thermal decomposition of the PTLG/PDLA blends by TGA showed that the apparent activation energy of the PTLG/PDLA blends was increased from 59.1 to 72.1 kJ/mol with the increasing of the PDLA content from 3 wt% to 20 wt%, which indicated the enhancement of thermal stability of the PTLG/PDLA blends by addition of PDLA. Furthermore, the biocompatibility of the PTLG/PDLA blends cultured with human adipose‐derived stem cells was evaluated by CCK‐8 and live/dead staining. The experiment results proved the PTLG/PDLA blends were a kind of biomaterial with excellent physical performances with very low cytotoxicity.     

The Crystallization and Melting Behaviors of PDLA-b-PBS-b-PDLA Tri-block Copolymers

In this study,the poly(D-lactide)-block-poly(butylene succinate)-block-poly(D-lactide)(PDLA-b-PBS-b-PDLA)triblock copolymers with a fixed length of PBS and various lengths of PDLA are synthesized,and the crystallization behaviors of the PDLA and PBS blocks are investigated.Although both the crystallization behaviors of PBS and PDLA blocks depend on composition,they exhibit different variations.For the PDLA block,its crystallization behaviors are mainly influenced by temperature and block length.The crystallization signals of PDLA block appear in the B-D 2-2 specimen,and these signals get enhanced with PDLA block length.The crystallization rates tend to decrease with increasing PDLA block lendth during crystallizing at 90 and 100°C.Crystallizing at higher temperature,the crystallization rates increase at first and then decrease with block length.The crystallization rates decrease as elevating the crystallization temperature.The melting temperatures of PDLA blocks increase with block lengths and crystallization temperatures.For the PBS block,its crystallization behaviors are mainly controlled by the nucleation and confinement from PDLA block.The crystallization and melting enthalpies as well as the crystallization and melting temperatures of PBS block reduce as a longer PDLA block has been copolymerized,while the crystallization rates of the PBS block exhibit unique component dependence,and the highest rate is observed in the B-D 2-2 specimen.The Avrami exponent of PBS crystallites is reduced as a longer PDLA block is incorporated or the sample is crystallized at higher temperature.This investigation provides a convenient route to tune the crystallization behavior of PBS and PLA.     

Non-isothermal crystallization of poly(L-lactide) (PLLA) under quiescent and steady shear conditions

<正>The non-isothermal crystallization of poly(L-lactide)(PLLA) under quiescent and steady shear flow conditions was in situ investigated by using polarizing optical microscopy(POM) with a hot shear stage and wide-angle X-ray diffraction(WAXD).The shear rate and the cooling rate both play a significant role in the final crystalline morphology and crystallinity.Under quiescent conditions,the morphology assumes different sized spherulites,and its crystallinity dramatically reduces with increasing the cooling rate.On the other hand,the shear flow increases the onset crystallization temperature,and enhances the final crystallinity.When the shear rate is above 5 s~(-1),cylindrite-like crystals are observed, furthermore,their content depends on the cooling rate.     

Entanglement and phase separation in hyperbranched polymer/linear polymer/solvent ternary blends

Hyperbranched polyethylene (HBPE)/linear polystyrene (PS)/chloroform (CF) solution was selected as a model system to investigate the effect of branching structure on entanglement and phase separation behavior in semi-dilute ternary polymer solutions. All the HBPE materials in this work were found to have similar chain architectures and the critical molecular weight was estimated to be 81.2 kDa. The results obtained by elastic light scattering and intrinsic fluorescence methods suggested that all ternary solutions exhibited UCST transition behavior upon cooling. Also, it was found that the increase in the molecular weight of PS led to increase in the phase separation rate, consistent with de Gennes prediction. However, the increase of molecular weight of HBPE did not monotonously reduce the compatibility of polymer components and the phase separation rate in ternary blends is as follows: medium molecular weight HBPE (HBPE-M) > high molecular weight HBPE (HBPE-H) > low molecular weight HBPE (HBPE-L). This abnormal behavior can be explained by the fact that, (i) for HBPE-L, no entanglements between HBPE chains occurred and the branching effect can be ignored, and (ii) for HBPE-M and HBPE-H, entanglement of HBPE chains can be formed, and the dilution of branches on entanglement of backbones should be taken into consideration, that is, the shorter the branches of HBPE, the higher the possibility of interpenetration of HBPE backbones between neighboring molecules and, consequently, the faster aggregation of HBPE during phase separation. Furthermore, a simple model based on decomposition reaction was proposed to quantitatively describe the phase separation kinetics and the apparent activation energies of phase separation were calculated to be −150.3 and −52.3 kJ/mol for HBPE-M/PS/CF and HBPE-H/PS/CF systems, respectively.     

Miscibility and isothermal crystallization of poly(L-lactide) and poly(trimethylene carbonate) blends

Miscibility, isothermal crystallization kinetics, and morphology of poly(L-lactide)/poly(trimethylene carbonate)(PLLA/PTMC) crystalline/amorphous blends were studied by differential scanning calorimetry(DSC) and optical microscopy(OM). The heterogeneity of OM images and an unchanged glass transition temperature showed that PLLA was immiscible with PTMC. During isothermal crystallization, the crystallization rate of PLLA improved when the PTMC content was low(≤ 20%). However, when the PTMC content was high(≥ 30%), the crystallization rate decreased significantly. The reason of these nonlinear changes in crystal kinetics was analyzed according to the nucleation and growth process by virtue of a microscope heating stage. The isothermal crystallization morphologies of the blends were also studied by polarized optical microscopy and the results confirmed the conclusions obtained from crystallization kinetics.     

Compatible blends of biorelated polyesters through catalytic transesterification in the melt

The transesterification during the melt blending of polylactide (PLA) and poly(butylene adipate-co-terephthalate) (PBAT) was investigated in presence of Ti(OBu)₄ as a catalyst. Both the effect of catalyst concentration and reaction duration was considered. The process was studied by analyzing the molecular weight of the polyesters by size exclusion chromatography (SEC). The rheological, thermal and morphological properties of the blends were investigated by melt flow rate, DSC and SEM analyses, respectively. Evidences about the formation of PBAT-PLA copolymers were obtained and discussed. The tensile properties of compression moulded films were also determined and correlated to the structure and phase morphology development of the blends. In particular, the use of Ti(OBu)₄ resulted in the improvement of compatibility. Moreover, the decrease in stiffness and the increase in elongation at break with the increase of mixing time was observed, in good agreement with the improved compatibility of the modified blend.     

Using two-dimensional time resolved light scattering to study the cure reaction induced phase separation process of epoxy-amine-polyethersulfone blend with secondary phase separation

<正>The generalized two-dimensional correlation analysis based on time-resolved light scattering patterns(2D TRLS) has been employed to study the phase separation process of an epoxy-amine-polyethersulfone blend in which the secondary phase separation takes place.The results of the 2D TRLS provided more detailed information that was not readily observed in the 1D TRLS patterns.(i) During the first process of phase separation,the sequential order of coarsening in size of the domains among the larger and smaller ones has been reversed between the diffusion regime and the hydrodynamic regime. (ii) The change of the larger domains in size,due to the hydrodynamic flow in the late stage of the first phase separation process,keeps on taking place earlier than that of the new domains appeared in the secondary phase separation process. (iii) During the secondary phase separation process the size growth of the smaller domains takes place earlier than that of the larger ones,probably due to the assumption that the coarsening mode could decrease the interface tension more quickly.     

Preparation and Characterization of Aligned PLLA/PCL/HA Composite Fibrous Membranes

Aligned poly(L-lactide) (PLLA)/poly(?-caprolactone) (PCL)/hydroxyapaite (HA) composite fibrous membranes were fabricated by electrospinning. Their morphology, thermal stability, mechanical properties, hydrophilic properties and biocompatibility were investigated. The electrospun fibers are highly aligned and the HA are oriented along the fiber axis. When HA are incorporated, the PLLA/PCL/HA composite fibers become thinner due to the increased conductivity. In addition, the aligned HA reinforce the electrospun fibrous membranes. The larger porosity and higher hydrophilic properties induced by HA in the electrospun fibers have improved the degradation of the PLLA/PCL/HA fibrous membranes which have no toxic effect on proliferation of adipose-derived stem cells.     

Linear and four‐armed poly(l‐lactide)‐block‐poly(d‐lactide) copolymers and their stereocomplexation with poly(lactide)s

Linear and four‐armed poly(l ‐lactide)‐block‐poly(d ‐lactide) (PLLA‐b‐PDLA) block copolymers are synthesized by ring‐opening polymerization of d ‐lactide on the end hydroxyl of linear and four‐armed PLLA prepolymers. DSC results indicate that the melting temperature and melting enthalpies of poly (lactide) stereocomplex in the copolymers are obviously lower than corresponding linear and four‐armed PLLA/PDLA blends. Compared with the four‐armed PLLA‐b‐PDLA copolymer, the similar linear PLLA‐b‐PDLA shows higher melting temperature (212.3 °C) and larger melting enthalpy (70.6 J g^?1). After these copolymers blend with additional neat PLAs, DSC, and WAXD results show that the stereocomplex formation between free PLA molecular chain and enantiomeric PLA block is the major stereocomplex formation. In the linear copolymer/linear PLA blends, the stereocomplex crystallites (sc) as well as homochiral crystallites (hc) form in the copolymer/PLA cast films. However, in the four‐armed copolymer/linear PLA blends, both sc and hc develop in the four‐armed PLLA‐b‐PDLA/PDLA specimen, which means that the stereocomplexation mainly forms between free PDLA molecule and the inside PLLA block, and the outside PDLA block could form some microcrystallites. Although the melting enthalpies of stereocomplexes in the blends are smaller than that of neat copolymers, only two‐thirds of the molecular chains participate in the stereocomplex formation, and the crystallization efficiency strengthens. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1560–1567     

A Comparison of Three Different Biodegradable Aliphatic Oligoesters (PGA,PLLA, and PCL) with Similar Linear Alkyl End Groups by DSC and SAXS

The biodegradable aliphatic oligoesters polyglycolide (PGA), poly(L-lactide) (PLLA), and poly(?-caprolactone) (PCL) with similar number-average molecular weight M_n values but different linear alkyl end groups [CH₃?[CH₂?CH₂]_m?CH₂?] were compared in terms of their physical properties, parameters such as melting temperature (T_m), crystallinity (x_i), long period (L), and lamella thickness (D). They were analyzed by DSC and SAXS. The effect of a longer and nonpolar alkyl end group such as docosyl [CH₃?[CH₂?CH₂]₁₀?CH₂?] on the long period (L) was more evident for PCL because it was the most nonpolar species in the family of oligoesters analyzed.     

Nanofibrosis of uncrystallizable poly(lactide‐co‐glycolide) via phase separation

Poly(lactide‐co‐glycolide) (PLGA) copolymers are a kind of biocompatible and biodegradable materials being widely used in tissue engineering. However, phase separation had not been reported successfully in fabricating these amorphous polymers into nanofibrous matrix, although this technique had shown advantages over electrospinning in producing a nanofiber network. In this study, tetrahydrofuran (THF)/H₂O solvent pairs were found suitable solvents to induce the formation of uniform PLGA gel at selected gelation temperatures. The results indicated that fine nanofibrous structures with fiber diameter around 40–60 nm could be obtained following the steps of gel formation, solvent extraction, and freeze‐drying, by controlling the concentration of PLGA/THF/H₂O solution, THF/H₂O ratio, and gelation temperature. Copyright © 2009 John Wiley & Sons, Ltd.     

Fracture toughening of epoxy matrices with blends of resins of different molecular weights and other modifiers

The microstructure and fracture behavior of epoxy mixtures containing two monomers of different molecular weights were studied. The variation of the fracture toughness by the addition of other modifiers was also investigated. Several amounts of high‐molecular‐weight diglycidyl ether of bisphenol A (DGEBA) oligomer were added to a nearly pure DGEBA monomer. The mixtures were cured with an aromatic amine, showing phase separation after curing. The curing behavior of the epoxy mixtures was investigated with thermal measurements. A significant enhancement of the fracture toughness was accompanied by slight increases in both the rigidity and strength of the mixtures that corresponded to the content of the high‐molecular‐weight epoxy resin. Dynamic mechanical and atomic force microscopy measurements indicated that the generated two‐phase morphology was a function of the content of the epoxy resin added. The influence of the addition of an oligomer or a thermoplastic on the morphologies and mechanical properties of both epoxy‐containing mixtures was also investigated. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3920–3933, 2004     

Effect of stereocomplex formation between enantiomeric poly(l,l-lactide) and poly(d,d-lactide) blocks on self-organization of amphiphilic poly(lactide)-block-poly(ethylene oxide) copolymers in dilute aqueous solution

The effect of crystallization of a hydrophobic poly(lactide) block on the self-organization of biocompatible and biodegradable amphiphilic poly(lactide)-block-poly(ethylene oxide) (PLA-b-PEO) copolymers in a dilute aqueous solution has been investigated. It was demonstrated that the co-crystallization of poly(L,L-lactide) [P(L,L)LA] and poly(d,d-lactide) [P(d,d)LA] chains under equimolar mixing of P(L,L)LA₄₆-b-PEO₁₁₃ and P(d,d)LA₅₆-b-PEO₁₁₃ copolymers resulted in the formation of stable and spontaneously water-redispersible stereocomplex micelles with semicrystalline P(L,L)LA/P(d,d)LA cores. It was shown that the P(L,L)LA₄₆ / P(d,d)LA₅₆-b-PEO₁₁₃ stereo-complex micelles produced by dialysis can be potential vehicles for the anticancer agent oxaliplatin     

The effect of glass transition on phase separation in binary off-critical blends: different coarsening regimes near the nonequilibrium percolation threshold

The nonequilibrium percolation threshold was shown to take an intermediate position between binodal and mean-field spinodal. Below the nonequilibrium percolation threshold, a bicontinuous phase structure was produced. This percolation structure, depending on supersaturation, breaks down to ramified clusters slowly assuming a spherical droplet form or contracts to the center of the sample. In the latter case, at late stages, secondary phase separation is observed. Accepted: 21 September 1998     

Control of droplet size of polymer–diluent blends through thermally induced phase separation

The effects of process conditions and molecular structure of polymer and diluent on the droplet size of membranes formed by thermally induced phase separatiom (TIPS) process were examined. The observed upper critical solution temperature–type phase boundaries of nylon‐12 blended with poly(ethylene glycol) (PEG) and nylon 12 diluted with poly(ethylene glycol) dimethyl ether (PEGDE) and their interaction energy densities calculated using the Flory–Huggins theory suggest that the nylon‐12/PEGDE blends are less stable than the nylon‐12–PEG blends. Infrared spectra confirmed that the difference in phase stability might come from specific interactions of the hydroxyl terminal groups of PEG with the amide groups from nylon‐12, which are not be feasible in the nylon‐12–PEGDE blends. The phase stability of diluent PEG blended with various nylons that are different in the number of methyl groups in the repeat unit was ranked in the order of: nylon‐6–PEG blend < nylon‐12–PEG blend < nylon‐11–PEG blend. We also noted that the phase‐separated droplets grew by both coalescence and the Oswald ripening process after the onset of phase separation. As a result, the cubic exponent of average droplet radius (R³) plotted against time satisfied the linear relationship. As the blends became less stable, the droplet growth rate increased and larger equilibrium droplets formed at a constant quenching depth. The TIPS membranes with desired pore structure could be prepared by controlling the molecular structure of components as well as by varying processing conditions such as quenching depth and annealing time. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 3042–3052, 2000     

Plasticization of poly(lactide) with blends of tributyl citrate and low molecular weight poly(d,l-lactide)-b-poly(ethylene glycol) copolymers

Polylactide (PLA) is a potential candidate for the partial replacement of petrochemical polymers because it is biodegradable and produced from annually renewable resources. Characterized by its high tensile strength, unfortunately the brittleness and rigidity limit its applicability. For a great number of applications such as packaging, fibers, films, etc., it is of high interest to formulate new PLA grades with improved flexibility and better impact properties.In order to develop PLA-based biodegradable packaging, the physico-mechanical properties of commercially available PLA should be modified using biodegradable plasticizers. To this end, PLA was melt-mixed with blends of tributyl citrate and more thermally stable low molecular weight block copolymers based on poly(d,l-lactide) and poly(ethylene glycol) of different molecular weights and topologies. The copolymers have been synthesized using a potassium based catalyst which is expected to be non toxic and were characterized by utilization of TGA, GPC and NMR techniques.The effect of the addition of up to 25 wt% plasticizer on the thermo-mechanical properties of PLA was investigated and the results were correlated with particular attention to the relationship between properties and applications.To confirm the safety of the catalyst used for the preparation of the copolymers, in vitro cytotoxicity tests have been carried out using MTS assay and the results show their biocompatibility in the presence of the fibroblast cells.Compost biodegradation experiments carried out using neat and plasticized PLA have shown that the presence of plasticizers accelerates the degradation of the PLA matrix.     

The morphology and dynamics of polymerization-induced phase separation

The morphology and dynamics of polymerization-induced phase separation in the initially homogeneous solution of a non-reactive component in reactive monomers are investigated by incorporating the reaction kinetics into the Cahn-Hilliard equation. Analytical results show that there is a reduction of the initial length scale in the early stage of phase separation. The reason is the increase of the molecule weight of emerging polymer, independent of the fact whether the system goes through the metastable region or not. The numerical results are in good agreement with theoretical prediction quite well.