ESR spectroscopy to determine the molecular mobility of poly(ethylene oxide) grafts in amphiphilic graft copolymers

The ethylene oxide (EO) mobility in polystyrene-graft-[poly(ethylene oxide)] (PS-g-PEO) and polystyrene-graft-[stearyl poly(ethylene oxide)] (PS-g-SPEO) copolymers was evaluated by spin probe techniques. The ESR spectra indicate that 4-hydroxyl-TEMPO (TEMPO = 2,2,6,6-tetramethylpiperidine-N-oxyl) is strongly biased to the PEO phase of the PS-g-(S)PEO membranes. The rotational correlation time τ_c can also be employed to assess the PEO mobility in PS-g-(S)PEO membranes. Although τ_c of PS-g-(S)PEO usually decreases with increasing surface density of EO, it is of interest that τ_c is rather high when the surface within a depth of at least 5 nm is fully occupied by SPEO (sample PS-g-SPEO-72.6).     

CHARACTERIZATION OF AMPHIPHILIC AND MICROPHASE SEPARATED GRAFT COPOLYMERS Ⅱ SURFACE CHARACTERIZATION AND IN VITRO BLOOD-COMPATIBILITY ASSESSMENT OF POLYSTYRENE-GRAFT-ω-STEARYLPOLY (ETHYLENE OXIDE)*

This paper reported the research results concerning the surface characterization ofpolystyrene-graft-w-stearyl poly(ethylene oxide) (PS-g-SPEO) by means of XPS,contactangle measurement and TEM, and its in vitro blood compatibility assessment by measuringthe plasma recalcification time (RT) and partial thromboplastin time (PTT). The XPSresults demonstrated that the surface and bulk composition of the PS-g-SPEO graftcopolymers differ remarkably from each other,and that SPEO component was constantlyenriched at the copolymer/air interface. Contact angle studies indicated that the surfacewater wettability can be adjusted effectively by changing the composition of the copolymer.PS-g-SPEO graft copolymers can undergo microphase separation as clearly illustrated byTEM photographs. The relationship between the surface properties of PS-g-SPEO graftcopolymer and its blood compatibility was also discussed.     

紫外导数光谱法在含苯乙烯链节共聚物组成测定中的应用

人们利用苯环在260nm区域的特征紫外吸收测定共聚物中聚苯乙烯(PS)链节含量时,常假设共聚物的紫外吸收仅来源于PS链节,且共聚物和PS均聚物具有相同的摩尔吸光系数.这些假定并不一定正确,即使共聚单体单元在260nm处不存在特征吸收,对共聚物吸收峰的位置和强度也有明显影响.不少研究者发现苯乙烯-甲基丙烯酸甲酯共聚物中,PS含量和吸光度不存在线性关系.E.J.Mechan发现丁二烯-苯乙烯共聚物中聚丁二烯链节在250～300nm范围内有一个宽的背景吸收.我们也发现在聚苯乙烯-g-十八烷基聚氧乙烯(PS-g-SPEO)接枝共聚物中,SPEO的背景吸收严重干扰了PS链节在260nm处的紫外吸收.为     

白蛋白原位复合生物医用功能材料的研究(Ⅰ)──材料的合成和表面结构研究

采用大分子单体技术合成了以聚甲基丙烯酸甲酯为主链,聚氧乙烯链为侧链,末端为白蛋白诱导吸附基团的十八烷基功能聚合物聚甲基丙烯酸甲酯接枝十八烷基聚氧乙烯.采用变角X光电子能谱和表面接触角研究了该功能聚合物在空气和水界面的性质.结果表明,在聚合物-空气界面,十八烷基聚氧乙烯(SPEO)的表面含量随表面层厚度的降低而升高,并在表面发生高度富集.在聚合物-水界面,聚合物表面重组行为较弱,形成了高SPEO含量的疏水表面,该SPEO尾形结构表面预期可发挥聚氧乙烯和十八烷基的协同作用,形成白蛋白原位复合的生物医用功能材料.     

十八烷基聚氧乙烯表面空间结构和蛋白质吸附行为研究

为探讨聚合物-水界面十八烷基聚氧乙烯链(SPEO)空间结构和白蛋白选择性吸附行为的内在联系,本文采用聚甲基丙烯酸甲酯接枝十八烷基聚氧乙烯(PMMA-g-SPEO),通过不同热处理方式获得了具有“环形链”(A)和“尾形链”(B)结构的两种模型表面.在A表面,水相接触角随水化时间的延长而迅速降低,最终亲水性的界面可同时有效阻抗白蛋白和纤维蛋白原的吸附,但不呈现对白蛋白的选择性吸附;而在B表面,水相接触角随水化时间的延长变化不大,最终疏水性的界面可在有效阻抗纤维蛋白原的吸附同时,有效诱导白蛋白的选择性吸附,具有聚氧乙烯(PEO)阻抗非特异性吸附和十八烷基选择性吸附协同作用的特点.     

Experimental observations on the scaling of adsorption isotherms for nonionic surfactants at a hydrophobic solid-water interface

The self-assembly of nonionic surfactants in bulk solution and on hydrophobic surfaces is driven by the same intermolecular interactions, yet their relationship is not clear. While there are abundant experimental and theoretical studies for self-assembly in bulk solution and at the air-water interface, there are only few systematic studies for hydrophobic solid-water interfaces. In this work, we have used optical reflectometry to measure adsorption isotherms of seven different nonionic alkyl polyethoxylate surfactants (CH3(CH2)I-1(OCH2CH2)JOH, referred to as CIEJ surfactants, with I = 10-14 and J = 3-8), on hydrophobic, chemically homogeneous self-assembled monolayers of octadecyltrichlorosilane. Systematic changes in the adsorption isotherms are observed for variations in the surfactant molecular structure. The maximum surface excess concentration decreases (and minimum area/molecule increases) with the square root of the number of ethoxylate units in the surfactant (J). The adsorption isotherms of all surfactants collapse onto the same curve when the bulk and surface excess concentrations are rescaled by the bulk critical aggregation concentration (CAC) and the maximum surface excess concentration. In an accompanying paper we compare these experimental results with the predictions of a unified model developed for self-assembly of nonionic surfactants in bulk solution and on interfaces.     

Relationship between morphology structure and composition of polycaprolactone/Poly(ethylene oxide)/Polylactide copolymeric microspheres

A novel tri‐component copolymer, polycaprolactone/poly(ethylene oxide)/polylactide (PCEL) was synthesized. The effect of the chemical composition on physical properties was investigated by using NMR, differential scanning calorimetry (DSC) and X‐ray diffraction. Both the soft segment poly(ethylene oxide) (PEO) and polycaprolactone (PCL) could enhance the mobility of polymer chains and decrease the crystallizability of the copolymers. The polymeric microspheres, which are of interest for drug delivery systems, were prepared using an emulsification‐solvent evaporation technique. By scanning electron microscopy (SEM) and atomic force microscopy (AFM), the surface morphology of the microspheres was studied. It was found that the presence of PEO segment could improve the hydrophilicity of the copolymers and the morphology of the polymeric microspheres could be altered by adjusting the chemical composition. The accumulation of PEO segments on the outer surface of the polymeric microspheres was proven by X‐ray photoelectron spectroscopy (XPS). It had also been proven that the PCL segment could facilitate the movement of PEO segment to the outer surface. Copyright © 2002 John Wiley & Sons, Ltd.     

仿细胞膜结构共聚物的合成及涂层性能

采用饥饿法将2-甲基丙烯酰氧乙基磷酰胆碱(MPC)分别与甲基丙烯酸十八烷基酯(SMA)、 甲基丙烯酸十二烷基酯(LMA)及甲基丙烯酸正丁酯(BMA)聚合, 通过改变投料比例和沉淀剂种类, 合成了一系列含磷酰胆碱基团的仿细胞膜结构的两亲性二元随机共聚物. ¹H NMR和元素分析结果表明, 合成的两亲性二元随机共聚物的组成与投料比相近. DSC结果表明, 聚合物具有较低的玻璃化转变温度. 表面张力及水的动态接触角(DCA)研究发现, 聚合物涂层表面具有明显的两亲性及表面结构易变性, 在空气中憎水基团在表面取向, 在水环境中亲水的磷酰胆碱基团则迁移取向到涂层表面形成仿细胞外层膜结构界面, 最终形成不溶于水的仿细胞膜结构涂层.     

Effect of sequence structure on wetting behaviors of fluorinated methacrylate polymers based on perfluorohexylethyl methacrylate and stearyl acrylate

Due to the non-crystalline properties of short chain perfluoroalkyl groups,using short chain perfluoroalkyl to stabilize low surface free energy polymers has been a challenging task.In this study,we prepare a series of random copolymers poly(perfluorohexylethyl methacrylate)-co-poly(stearyl acrylate) (P13FMA-co-PSA) and block copolymers poly(perfluorohexylethyl methacrylate)-b-poly(stearyl acrylate) (P13FMA-b-PSA),and systematically investigate the effects of the sequence structure and the content of 13FMA of the fluorinated copolymers on surface free energy and surface reorganization.Static/dynamic contact angle goniometry and water/oil repellency analyses demonstrate that the random polymer P13FMA-co-PSA could not achieve low surface free energy and low surface reorganization at the same time.In contrast,for the block copolymer P13FMA-b-PSA,both low surface free energy and low surface reorganization are acquired simultaneously.The results of X-ray photoelectron spectroscopy (XPS),dynamic contact angle goniometry and differential scanning calorimetry (DSC) reveal the above-mentioned properties.The consecutive 13FMA segments improve the surface fluorine density,while the consecutive SA chains enhance the crystallinity of the SA segments,and further hinder the surface reorganization of the perfluoroalkyl groups.Therefore,P13FMA-b-PSA exhibits a higher utilization efficiency of fluorine atoms and a better structural stability than P13FMA-co-PSA.     

改性酚氧树脂/聚(甲基丙烯酸丁酯-co-4-乙烯基吡啶)共混物的相容-络合行为和表面表征

合成了一系列不同4-乙烯基吡啶含量的聚(甲基丙烯酸丁酯-co-4-乙烯基吡啶)(BVPy)共聚物,并对酚氧树脂(Phenoxy)的仲羟基进行了不同乙酰化程度的改性.用粘度法和激光光散射(LLS)研究了BVPy/改性Phenoxy共混物在溶液中的络合行为对氢键相互作用基团密度的依赖性,并用DSC研究了共混体系在本体中的相容性.将粘度法及LLS的结果结合起来,得到了改性Phenoxy/BVPy共混体系的不相容-相容-络合转变相图.在此基础上,用XPS初步考察了共混物的相容性对其表面组成的影响.结果表明,大分子间的络合相互作用可抑制共混物的表面富集.     

Unified model to predict self-assembly of nonionic surfactants in solution and adsorption on solid or fluid hydrophobic surfaces: effect of molecular structure

We have developed a pseudo-phase model to predict the self-assembly of nonionic surfactants on hydrophobic solid or fluid interfaces and in bulk solution. The uniqueness of this model is that it provides the relationship between molecular structure and self-assembly in solution and on interfaces. This model requires the input of minimal new experimental data. The remaining model parameters may be calculated on the basis of the surfactant molecular structure. The validity of the model has been established by comparing predictions with a wide array of experimental data for nonionic surfactant adsorption at the hydrophobic solid-water interface and at the air-water interface. The same model is then used to predict the self-assembly in bulk solution. The model predictions for critical aggregation concentration, aggregate shapes, and adsorption isotherms of various surfactants are in good agreement with the experimental data available in the literature.     

Confinement Effects on the Crystallization of Poly(ethylene oxide) Nanotubes

In this work, we show the effects of nanoconfinement on the crystallization of poly(ethylene oxide) (PEO) nanotubes embedded in anodized aluminum oxide (AAO) templates. The morphological characteristics of the hollow 1D PEO nanostructures were evaluated by scanning electron microscopy (SEM). The crystallization of the PEO nanostructures and bulk was studied with differential scanning calorimetry (DSC) and wide-angle X-ray diffraction (WAXD). The crystallization of PEO nanotubes studied by DSC is strongly influenced by the confinement showing a strong reduction in the crystallization temperature of the polymer. X-ray diffraction (XRD) experiments confirmed the isothermal crystallization results obtained by DSC, and studies carried out at low temperatures showed the absence of crystallites oriented with the extended chains perpendicular to the pore wall within the PEO nanotubes, which has been shown to be the typical crystal orientation for one-dimensional polymer nanostructures. In contrast, only planes oriented 33, 45, and 90° with respect to the plane (120) are arranged parallel to the pore's main axis, indicating preferential crystal growth in the direction of the radial component. Calculations based on classical nucleation theory suggest that heterogeneous nucleation prevails in the bulk PEO whereas for the PEO nanotubes a surface nucleation mechanism is more consistent with the obtained results.     

Characterization of the interaction of poly(ethylene oxide) with nanosize fumed silica: Surface effects on crystallization

Poly(ethylene oxide) (PEO) of 4600 molar mass (PEO‐4600) was crystallized from methanol in the presence of hydrophilic fumed silicas (A380, A200, and OX50) with nominal surface areas of 380, 200, and 50 m²/g and a hydrophobic fumed silica (R812s) modified with methyl groups. The composites were characterized by thermogravimetric analysis and differential scanning calorimetry. The inhibition of crystallization and the tendency for chain reorganization after melting were in the order of A380 > A200 > OX50 > R812s, respectively, that is, both were least for the hydrophobic silica and increased with increasing specific surface area for the hydrophilic silica. The interaction of PEO with the silica increased in the melt state as compared with the solution‐cast samples, resulting in enhanced suppression of crystallization. The following took place at a high silica content: (1) crystallization occurred at crystallization temperatures [T_c < T_c (bulk)], suggesting that the silica inhibited crystallization; (2) crystallites with melt temperatures [T_m < T_m (bulk)] were observed, indictive of smaller and/or less perfect crystals; and (3) melt entropies [ΔS_m (surface) < ΔS_m (bulk)] suggested that the interaction of surface silanols, Si_sOH, with PEO decreased both the melt entropy and crystallite size/perfection. Crystallinity was observed in solution‐cast composites when there were greater than ～0.03 PEO molecules/nm² for native and ～0.01 PEO molecules/nm² for methylated fumed silica, similar to reported plateau equilibrium adsorption values from methanol. These results were consistent with a model in which PEO interacted more strongly with native fumed silica as compared with hydrophobically modified silica because of hydrogen bonding of the ether oxygens of PEO with the acidic silanols, preventing chain mobility and crystallization. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1978–1993, 2003     

Surface immobilization of poly(ethylene oxide): Structure and properties

We covalently immobilized poly(ethylene oxide) (PEO) chains onto a fluorinated ethylene propylene copolymer (FEP) surface. On the FEP surface, aldehyde groups were first deposited by plasma polymerization of acetaldehyde or acrolein. Then, amino‐PEO chains were immobilized through Schiff base formation, which was followed by reduction stabilization with sodium cyanoborohydride. The PEO‐grafted polymer surfaces thus prepared were characterized by X‐ray photoelectron spectroscopy (XPS), atomic force microscopy, contact‐angle measurements, and protein adsorption. The dramatic increase in the C O intensity of the high‐resolution XPS C 1s spectrum, together with an overall increase in oxygen content, indicated the successful attachment of PEO chains onto the acetaldehyde plasma surfaces. The amount of grafted PEO chains depended on the superfacial density of the plasma‐generated aldehyde groups. The grafted monoamino‐PEO chains formed a brushlike structure on the polymer surface, whereas the bisamino‐PEO chains predominately adopted a looplike conformation. The PEO surface had a regular morphology with greater roughness than the aldehyde surface underneath. Surface hydrophilicity increased with the grafting of PEO. Also, the bisamino‐PEO‐grafted surface had slightly higher surface hydrophilicity than its monoamino‐PEO counterpart. These PEO coatings reduced fibrinogen adsorption by 43% compared with the substrate FEP surface. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2323–2332, 2000     

水溶性聚合物和两亲聚合物——10.两亲聚合物PAMC_(16)S的自组装有序膜

用自组装技术在金(纯金和经阳极氧化的金)表面上获得了新型两亲聚合物PAMC_(16)S的有序膜。用接触角测试,XPS谱和电化学分析等方法对自组装膜进行了表征。根据膜表面的润湿性,金表面的自组装膜是疏水的,亲水的磺酸基团连于金表面,而疏水的碳氢链从表面伸展出。XPS实验结果支持金表面上单层膜的疏水结构。聚合物单层膜复盖的金电极起到含有针孔缺陷的阻膈型电极的作用。单层膜在法拉第反应中显示很强的吸附稳定性,说明聚合物LB膜在潜在应用中有其特有的特点。     

Self-assembly of polystyrene-block-poly(ethylene oxide) copolymers at the air-water interface: is dewetting the genesis of surface aggregate formation?

Block copolymer self-assembly at the air-water interface is commonly regarded as a two-dimensional counterpart of equilibrium block copolymer self-assembly in solution and in the bulk; however, the present analysis of atomic force microscopy (AFM) and isotherm data at different spreading concentrations suggests a nonequilibrium mechanism for the formation of various polystyrene-b-poly(ethylene oxide) (PS-b-PEO) aggregates (spaghetti, dots, rings, and chainlike aggregates) at the air-water interface starting with an initial dewetting of the copolymer spreading solution from the water surface. We show that different spreading concentrations provide kinetic snapshots of various stages of self-assembly at the air-water interface as a result of different degrees of PS chain entanglements in the spreading solution. Two block copolymers are investigated: MW = 141k (11.4 wt % PEO) and MW = 185k (18.9 wt % PEO). Langmuir compression isotherms for the 185k sample deposited from a range of spreading concentrations (0.1-2.0 mg/mL) indicate less dense packing of copolymer chains within aggregate cores formed at lower spreading concentrations due to a competition between the interfacial adsorption of PEO blocks and the kinetic restrictions of PS chain entanglements. From AFM analysis of the transferred Langmuir-Blodgett films, it is clear that PS chain entanglements in the spreading solution also affect the morphological evolution of surface aggregates for both samples, with earlier structures being trapped at higher concentrations. At the highest spreading concentration for the 141k copolymer, the coexistence of long spaghetti aggregates with cellular arrays of holes, along with various transition structures, indicates that various surface aggregates evolve from networks of rims formed as a result of dewetting of the evaporating spreading solution from the water surface.     

EFFECTS OF SOLVENT TREATMENT ON SURFACE MORPHOLOGY AND COMPOSITION OF POLY(METHYL METHACRYLATE)-g-POLY(ETHYLENE OXIDE)

Surface morphology and composition of solution-cast films of poly(methyl methacrylate)-g-poly(ethylene oxide)(PMMA-g-PEO) were investigated by using XPS, DSC, SEM and contact angle measurement. The microphase separatedstructure of the copolymers was studied by TEM. Generally, for the same graft copolymer, the surface content of PEO orhydrophilicity can be as follows: Surface treated with petroleum ether or cyclohexane>surface untreated with solvent>surface treated with water or ethyl alcohol. Graft copolymer having longer PEO side chains and higher PEO content shows aseparated PEO phase with even a certain degree of crystallinity on the surface. PEO crystallinity was destroyed by water orethyl alcohol treatment, however, surface treatment with petroleum ether or cyclohexane favors the growth of PEO crystal.TEM shows that graft copolymers with longer PEO side chains (M_n of PEO, 3200) may readily undergo microphase separation and the shape and size of domains depend on the copolymer's composition.     

Direct measurement of molecular motion in freestanding polystyrene thin films

An optical photobleaching technique has been used to measure the reorientation of dilute probes in freestanding polystyrene films as thin as 14 nm. Temperature-ramping and isothermal anisotropy measurements reveal the existence of two subsets of probe molecules with different dynamics. While the slow subset shows bulk-like dynamics, the more mobile subset reorients within a few hundred seconds even at T(g,DSC) - 25 K (T(g,DSC) is the glass transition temperature of bulk polystyrene). At T(g,DSC) - 5 K, the mobility of these two subsets differs by 4 orders of magnitude. These data are interpreted as indicating the presence of a high-mobility layer at the film surface whose thickness is independent of polymer molecular weight and total film thickness. The thickness of the mobile surface layer increases with temperature and equals 7 nm at T(g,DSC).     

Molecular dynamics simulations of charged nanoparticle self-assembly at ionic liquid-water and ionic liquid-oil interfaces

Nanoparticle self-assembly at liquid-liquid interfaces can be significantly affected by the individual nanoparticle charges. This is particularly true at ionic liquid (IL) based interfaces, where Coulombic forces play a major role. Employing 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF(6)]) as a model IL, we have studied the self-assembly of hydrophobic nanoparticles with different surface charges at the IL/water and IL/oil (hexane) interfaces using molecular dynamics simulations. In the IL/water system, the nanoparticles were initially dispersed in the water phase but quickly equilibrated at the interface, somewhat in favor of the IL phase. This preference was lessened with increased nanoparticle charge. In the IL/hexane system, all charged nanoparticles interacted with the IL to some extent, whereas the uncharged nanoparticles remained primarily in the hexane phase. Potential of mean force calculations supported the observations from the equilibrium studies and provided new insights into the interactions of the nanoparticles and ionic liquid based interfaces.     

Template-directed adsorption of block copolymers on alkanethiol-patterned gold surfaces

Functionalized alkanethiols have been self-assembled on gold to modify the wetting properties of the surface and promote or hinder the adsorption of block copolymers containing both hydrophobic and hydrophilic blocks. X-ray photoelectron spectroscopy (XPS) studies of spin-coated polyethylene-block-poly(ethylene oxide) (PE-b-PEO) copolymers on 16-mercaptohexadecanoic acid (MHDA)-, octadecanethiol (ODT)-, and 1H,1H,2H,2H-perfluorodecanethiol (PFDT)-covered surfaces have been performed. In the case of an 80 wt % PEO block copolymer, spin-coating on a gold surface precovered with MHDA results in a polymer film thick enough to completely attenuate Au 4f photoelectrons; spin-coating on the more hydrophobic ODT and PFDT monolayers leads to significantly thinner polymer films and incomplete attenuation of the gold photoelectrons. The opposite results are observed when a 20 wt % PEO block copolymer is used. Angle-resolved XPS studies of the 80 wt % PEO block copolymer spin-coated onto an MHDA-covered surface indicate that the PE blocks of the polymer segregate to the near-surface region, oriented away from the hydrophilic carboxylic acid tails of the monolayers; the surface concentration of PE is further enhanced by annealing at 90 degrees C. Microcontact printing and dip-pen nanolithography have been used to pattern gold surfaces with MHDA, and the surfaces have been backfilled with ODT or PFDT, such that the unpatterned regions of the surface are covered with hydrophobic monolayers. In the case of backfilling with PFDT, spin-coating the 80 wt % PEO copolymer onto these patterned surfaces and subsequent annealing results in the block copolymer preferentially adsorbing on the MHDA-covered regions and forming well-defined patterns that mimic the MHDA pattern, as determined by scanning electron microscopy and atomic force microscopy. Significantly worse patterning, characterized by micron-sized polymer droplets, results when the surface is backfilled with ODT instead of PFDT. Using PFDT and MHDA, polymer features having widths as small as 500 nm have been formed. These studies demonstrate a novel method to pattern block copolymers with nanoscale resolution.