Dicationic imidazolium ionic liquid modified silica as a novel reversed‐phase/anion‐exchange mixed‐mode stationary phase for high‐performance liquid chromatography

A dicationic imidazolium ionic liquid modified silica stationary phase was prepared and evaluated by reversed‐phase/anion‐exchange mixed‐mode chromatography. Model compounds (polycyclic aromatic hydrocarbons and anilines) were separated well on the column by reversed‐phase chromatography; inorganic anions (bromate, bromide, nitrate, iodide, and thiocyanate), and organic anions (p‐aminobenzoic acid, p‐anilinesulfonic acid, sodium benzoate, pathalic acid, and salicylic acid) were also separated individually by anion‐exchange chromatography. Based on the multiple sites of the stationary phase, the column could separate 14 solutes containing the above series of analytes in one run. The dicationic imidazolium ionic liquid modified silica can interact with hydrophobic analytes by the hydrophobic C₆ chain; it can enhance selectivity to aromatic compounds by imidazolium groups; and it also provided anion‐exchange and electrostatic interactions with ionic solutes. Compared with a monocationic ionic liquid functionalized stationary phase, the new stationary phase represented enhanced selectivity owing to more interaction sites.     

Development of a decaaza‐cyclophane stationary phase for high‐performance liquid chromatography

A new stationary phase for high‐performance liquid chromatography was prepared by covalently bonding a heteroatom‐bridged cyclophane onto silica gel using 3‐aminopropyltriethoxysilane as the coupling reagent. The structure of the new material was characterized by infrared spectroscopy, elemental analysis, and thermogravimetric analysis. The linear solvation energy relationship method was successfully employed to evaluate the new phase with a set of 25 solutes, and compared with octadecylsilyl and p‐tert‐butyl‐calix[4]arene bonded stationary phases. The retention characteristics of the new phase are similar to the octadecylsilyl and conventional calixarene phases, and it also has distinctive features. In addition, the chromatographic behavior of the phase was illustrated by eluting alkylbenzenes and inorganic anions in the reversed‐phase mode and anion‐exchange mode, respectively. Thus, multi‐interaction mechanisms and mixed‐mode separation of the new phase can very likely guarantee its promising application in the analysis of complex samples. The column has been successfully employed for the analysis of triazines in milk, and it is demonstrated to be a competitive alternative analytical method for the determination of triazine herbicide residues.     

Evaluation and comparison of n‐alkyl chain and polar ligand bonded stationary phases for protein separation in reversed‐phase liquid chromatography

Protein retention is very sensitive to the change of solvent composition in reversed‐phase liquid chromatography for so called “on–off” mechanism, leading to difficulty in mobile phase optimization. In this study, a novel 3‐chloropropyl trichlorosilane ligand bonded column was prepared for protein separation. The differences in retention characteristics between the 3‐chloropropyl trichlorosilane ligand bonded column and n‐alkyl chain modified (C₂, C₄, C₈) stationary phases were elucidated by the retention equation . Retention parameters (a and c) of nine standard proteins with different molecular weights were calculated by using homemade software. Results showed that retention times of nine proteins were similar on four columns, but the 3‐chloropropyl trichlorosilane ligand bonded column obtained the lowest retention parameter values of larger proteins. It meant that their retention behavior affected by acetonitrile concentration would be different due to lower |c| values. More specifically, protein elution windows were broader, and retentions were less sensitive to the change of acetonitrile concentration on the 3‐chloropropyl trichlorosilane ligand bonded column than that on other columns. Meanwhile, the 3‐chloropropyl trichlorosilane ligand bonded column displayed distinctive selectivity for some proteins. Our results indicated that stationary phase with polar ligand provided potential solutions to the “on–off” problem and optimization in protein separation.     

Systematic evaluation and optimization of high‐performance liquid chromatography separation of polyoxins

The chromatographic behavior of a kind of nucleoside peptides, polyoxins, was investigated in this study. Molecular simulation technique was used to elucidate the temperature‐dependent peak sharpening of polyoxins. There was a relatively small energy barrier between the global minimum conformer and the local minimum conformer of polyoxin A and the high temperature helped to quickly cross the energy barrier and accelerate the conformational transformation for getting the global minimum, so that stationary phase could not identify these two conformations and presented a sharp peak. Two kinds of mixed‐mode columns, strong cation exchange or strong anion exchange ligands bonded with C18 (C18SCX and C18SAX) were used to improve separation selectivity of four polyoxins (A, K, F, H). The electrostatic attraction was necessary to increase the retention to ensure that the alkyl chain can give better play to its hydrophobic effect. Therefore, four polyoxins were well separated on C18SCX at pH 2 and they were also well separated on C18SAX at pH 7. In the small‐scale purification of polyoxins, the sample loading of the C18SCX was five times than that of the C18SAX and the purity of the collected four polyoxins was all over 90%.     

Evaluation and application of a mixed‐mode chromatographic stationary phase in two‐dimensional liquid chromatography for the separation of traditional Chinese medicine

In this study, two mixed‐mode chromatography stationary phases (C8SAX and C8SCX) were evaluated and used to establish a two‐dimensional liquid chromatography system for the separation of traditional Chinese medicine. The chromatographic properties of the mixed‐mode columns were systematically evaluated by comparing with other three columns of C8, strong anion exchanger, and strong cation exchanger. The result showed that C8SAX and C8SCX had a mixed‐mode retention mechanism including electrostatic interaction and hydrophobic interaction. Especially, they were suitable for separating acidic and/or basic compounds and their separation selectivities could be easily adjusted by changing pH value. Then, several off‐line 2D‐LC systems based on the C8SAX in the first dimension and C8SAX, C8SCX, or C8 columns in the second dimension were developed to analyze a traditional Chinese medicine—Uncaria rhynchophylla. The two‐dimensional liquid chromatography system of C8SAX (pH 3.0) × C8SAX (pH 6.0) exhibited the most effective peak distribution. Finally, fractions of U. rhynchophylla prepared from the first dimension were successfully separated on the C8SAX column with a gradient pH. Thus, the mixed‐mode stationary phase could provide a platform to separate the traditional Chinese medicine in practical applications.     

Investigating retention characteristics of a mixed‐mode stationary phase and the enhancement of monolith selectivity for high‐performance liquid chromatography

The synthesis and chromatographic behavior of an analytical size mixed‐mode bonded silica monolith was investigated. The monolith was functionalized by an in situ modification process of a bare silica rod with chloro(3‐cyanopropyl)dimethyl silane and chlorodimethyl propyl phenyl silane solutions. These ligands were selected in order to combine both resonance and nonresonance π‐type bonding within a single separation environment. Selectivity studies were undertaken using n‐alkyl benzenes and polycyclic aromatic hydrocarbons in aqueous methanol and acetonitrile mobile phases to assess the methylene and aromatic selectivities of the column. The results fit with the linear solvent strength theory suggesting excellent selectivity of the column was achieved. Comparison studies were performed on monolithic columns that were functionalized separately with cyano and phenyl ligands, suggesting highly conjugated molecules were able to successfully exploit both of the π‐type selectivities afforded by the two different ligands on the mixed‐mode column.     

Continuous separation of maslinic and oleanolic acids from olive pulp by high‐speed countercurrent chromatography with elution‐extrusion mode

In this work, a continuous high‐speed countercurrent chromatography method has been developed on the basis of elution‐extrusion mode and this method was successfully applied to the separation of maslinic and oleanolic acid from the extract of olive pulp. In the process of ‘elution’, the sample solution was continuously loaded into the column and the maslinic acid was steadily eluted out in this step while highly retained oleanlic acid always stayed in the column. In the process of ‘extrusion’, the oleanlic acid was pushed out of the column with the stationary phase. In this way, we achieved a large sample loading. A total of 120 mL sample solution (about 89.55% of the column volume) which contains 600 mg olive pulp extract was pumped in the apparatus by a constant‐flow pump and the maslinic and oleanolic acids were largely separated within 120 min. Both of these two compounds presented high yields and high purities (271.6 mg for maslinic acid with 86.7% and 83.9 mg oleanolic acids with 83.4%).     

Generalized Gaussian reference curve measurement model for high‐performance liquid chromatography with diode array detector separation and its solution by multi‐target intermittent particle swarm optimization

In order to separate a high‐performance liquid chromatography with diode array detector (HPLC‐DAD) data set to chromatogram peaks and spectra for all compounds, a separation method based on the model of generalized Gaussian reference curve measurement (GGRCM) and the algorithm of multi‐target intermittent particle swarm optimization (MIPSO) is proposed in this paper. A parameter θ is constructed to generate a reference curve r(θ) for a chromatogram peak based on its physical principle. The GGRCM model is proposed to calculate the fitness ε(θ) for every θ, which indicates the possibility for the HPLC‐DAD data set to contain a chromatogram peak similar to the r(θ). The smaller the fitness is, the higher the possibility. The algorithm of MIPSO is then introduced to calculate the optimal parameters by minimizing the fitness mentioned earlier. Finally, chromatogram peaks are constructed based on these optimal parameters, and the spectra are calculated by an estimator. Through the simulations and experiments, the following conclusions are drawn: (i) the GGRCM‐MIPSO method can extract chromatogram peaks from simulation data set without knowing the number of the compounds in advance even when a severe overlap and white noise exist and (ii) the GGRCM‐MIPSO method can be applied to the real HPLC‐DAD data set. Copyright © 2014 John Wiley & Sons, Ltd.     

Quantitative analysis of hydroxylated polymethoxyflavones by high‐performance liquid chromatography

Since the hydroxylated polymethoxyflavones were isolated from orange and other citrus peels, they have been found to exhibit potent anti‐cancer and anti‐inflammatory activities. Hydroxylated polymethoxyflavones, especially 5‐demethylnobiletin and 5‐hydroxy‐3,6,7,8,3′,4′‐hexamethoxyflavone, exert more potent activities than their counterpart polymethoxyflavones (PMFs). These findings have led to a new era of exploration of hydroxylated polymethoxyflavones and PMFs from the citrus genus for their potential application in nutraceutical, pharmaceuticals and functional foods. A practical and efficient analytical method for quantitatively characterizing the composition of PMFs has only recently been developed, and has applications both in academic research laboratories and quality controls. However, chemical analyses of the hydroxylated polymethoxyflavones have not been previously described. This paper reports the quantitative analysis of six 5‐demethylated PMFs in various commercial orange peel extracts, using high‐performance liquid chromatography with UV detection. Copyright © 2009 John Wiley & Sons, Ltd.     

Chiral separation and quantitation of dorzolamide hydrochloride enantiomers by high‐performance liquid chromatography

A direct HPLC method for chiral separation of dorzolamide hydrochloride (4S,6S) and its enantiomer (4R,6R) was developed. Dorzolamide (4S,6S) and its antipode were separated on a chiral‐α₁‐acid glycoprotein column (150×4.0 mm, 5 μm). The influences of pH, temperature, flow rate, buffer concentration, and organic modifiers of the mobile phase on the retention and enantioselectivity were evaluated. The mobile phase consisted of an ammonium acetate buffer of pH 7.0. The method was validated for linearity, repeatability, accuracy, LOD, and LOQ. Calibration curves were constructed in the range of 0.5–10 μg/mL for dorzolamide (4S,6S) and 0.2–5 μg/mL for its enantiomer (4R,6R). Repeatability (n=6) showed less than 2% RSD. LOD and LOQ of the two enantiomers were found to be 0.2 and 0.5 for dorzolamide (4S,6S), 0.05 and 0.2 for its enantiomer (4R,6R), respectively. The proposed method was applied to the determination of dorzolamide enantiomer (4R,6R) in a raw material and two different eye drop samples.     

Comprehensive analysis of pharmaceutical products using simultaneous mixed‐mode (ion‐exchange/reversed‐phase) and hydrophilic interaction liquid chromatography

Liquid chromatographic assays were developed using a mixed‐mode column coupled in sequence with a hydrophilic interaction liquid chromatography column to allow the simultaneous comprehensive analysis of inorganic/organic anions and cations, active pharmaceutical ingredients, and excipients (carbohydrates). The approach utilized dual sample injection and valve‐mediated column switching and was based upon a single high‐performance liquid chromatography gradient pump. The separation consisted of three distinct sequential separation mechanisms, namely, (i) ion‐exchange, (ii) mixed‐mode interactions under an applied dual gradient (reversed‐phase/ion‐exchange), and (iii) hydrophilic interaction chromatography. Upon first injection, the Scherzo SS C₁₈ column (Imtakt) provided resolution of inorganic anions and cations under isocratic conditions, followed by a dual organic/salt gradient to elute active pharmaceutical ingredients and their respective organic counterions and potential degradants. At the top of the mixed‐mode gradient (high acetonitrile content), the mobile phase flow was switched to a preconditioned hydrophilic interaction liquid chromatography column, and the standard/sample was reinjected for the separation of hydrophilic carbohydrates, some of which are commonly known excipients in drug formulations. The approach afforded reproducible separation and resolution of up to 23 chemically diverse solutes in a single run. The method was applied to investigate the composition of commercial cough syrups (Robitussin®), allowing resolution and determination of inorganic ions, active pharmaceutical ingredients, excipients, and numerous well‐resolved unknown peaks.     

Analytical and semipreparative chiral separation of cis‐itraconazole on cellulose stationary phases by high‐performance liquid chromatography

cis‐Itraconazole is a chiral antifungal drug administered as a racemate. The knowledge of properties of individual cis‐itraconazole stereoisomers is vital information for medicine and biosciences as different stereoisomers of cis‐itraconazole may possess different affinity to certain biological pathways in the human body. For this purpose, either chiral synthesis of enantiomers or chiral separation of racemate can be used. This paper presents a two‐step high‐performance liquid chromatography approach for the semipreparative isolation of four stereoisomers (two enantiomeric pairs) of itraconazole using polysaccharide stationary phases and volatile organic mobile phases without additives in isocratic mode. The approach used involves the separation of the racemate into three fractions (i.e. two pure stereoisomers and one mixed fraction containing the remaining two stereoisomers) in the first run and consequent separation of the collected mixed fraction in the second one. For this purpose, combination of cellulose tris‐(4‐methylbenzoate) and cellulose tris‐(3,5‐dimehylphenylcarbamate) columns with complementary selectivity for cis‐itraconazole provided full separation of all four stereoisomers (with purity of each isomer > 97%). The stereoisomers were collected, their optical rotation determined and their identity confirmed based on the results of a previously published study. Pure separated stereoisomers are subjected to further biological studies.     

Preparation of a weak anion exchange/hydrophobic interaction dual‐function mixed‐mode chromatography stationary phase for protein separation using click chemistry

In this study, 3‐diethylamino‐1‐propyne was covalently bonded to the azide‐silica by a click reaction to obtain a novel dual‐function mixed‐mode chromatography stationary phase for protein separation with a ligand containing tertiary amine and two ethyl groups capable of electrostatic and hydrophobic interaction functionalities, which can display hydrophobic interaction chromatography character in a high‐salt‐concentration mobile phase and weak anion exchange character in a low‐salt‐concentration mobile phase employed for protein separation. As a result, it can be employed to separate proteins with weak anion exchange and hydrophobic interaction modes, respectively. The resolution and selectivity of the stationary phase were evaluated in both hydrophobic interaction and ion exchange modes with standard proteins, respectively, which can be comparable to that of conventional weak anion exchange and hydrophobic interaction chromatography columns. Therefore, the synthesized weak anion exchange/hydrophobic interaction dual‐function mixed‐mode chromatography column can be used to replace two corresponding conventional weak anion exchange and hydrophobic interaction chromatography columns to separate proteins. Based on this mixed‐mode chromatography stationary phase, a new off‐line two‐dimensional liquid chromatography technology using only a single dual‐function mixed‐mode chromatography column was developed. Nine kinds of tested proteins can be separated completely using the developed method within 2.0 h.     

Off‐line comprehensive two‐dimensional reversed‐phase countercurrent chromatography with high‐performance liquid chromatography: Orthogonality in separation of Polygonum cuspidatum Sieb. et Zucc

Off‐line comprehensive two‐dimensional reversed‐phase countercurrent chromatography with high‐performance liquid chromatography was investigated in separation of crude ethanol extract from traditional Chinese medicinal herb Polygonum cuspidatum Sieb. et Zucc. Two‐dimensional contour plots for countercurrent chromatography with high‐performance liquid chromatography was obtained after comprehensive separation was completed. Total peak capacity was evaluated and approximately 810 peaks were obtained through a comprehensive two‐dimensional separation. A highly orthogonality of 52.23% and a large separation space occupancy of 88.86% were achieved. Meanwhile, it was found that several components could be well separated by countercurrent chromatography while they could not be separated by high‐performance liquid chromatography, and vice versa, which further indicated the orthogonality of the two separation methods. The off‐line comprehensive two‐dimensional countercurrent chromatography with high‐performance liquid chromatography provided a promising and powerful method for separation of complex natural products.     

Simultaneous determination of serum propafenone and its metabolites using high‐performance liquid chromatography

Propafenone, a class Ic antiarrhythmic agent, is metabolized to 5‐hydroxypropafeone (5‐OHP) and N‐depropylpropafenone (NDPP). Simultaneous determination of serum propafenone and its metabolites was performed using HPLC equipped with a conventional octadecylsilyl silica column and ultraviolet detector. The wavelength was set at 250 nm. Propafenone and its metabolites in the serum were extracted using diethyl ether. The mobile phase solution, comprising 1‐pentanesulfonic acid sodium salt (0.1 m ), acetonitrile and acetic acid (280:185:2.5, v/v/v), was pumped at a flow rate of 1 mL/min. The recoveries of propafenone, 5‐OHP and NDPP were greater than 85, 82 and 60%, respectively, with the coefficients of variation (CVs) less than 5.4, 1.9 and 2.9%, respectively. The calibration curves were linear for a concentration range of 12.5–1500 ng/mL for propafenone and 2–500 ng/mL for 5‐OHP and NDPP (r > 0.999). CVs in the intraday assays were 1.0–3.8% for propafenone, 0.6–2.0% for 5‐OHP and 0.6–1.7% for NDPP. CVs in interday assays were 1.3–7.7% for propafenone, 1.1–6.5% for 5‐OHP and 5.4–8.0% for NDPP. The present HPLC method can be used to assess the disposition of propafenone and its metabolites for pharmacokinetic studies and therapeutic drug monitoring of propafenone.     

An optimized mixed‐mode stationary phase based on silica monolith particles for the separation of peptides and proteins in high‐performance liquid chromatography

A phase with both hydrophobic and hydrophilic functionalities has been synthesized by modification of ground silica monolith particles with C18 and 1‐[3‐(trimethoxysilyl)propyl] urea ligands. A series of phases was prepared by changing the ratio of the two ligands to determine the optimal ratio in view of separation efficiency. The resultant optimized stationary phase was packed in narrow‐bore glass‐lined stainless‐steel columns (1 × 300 mm and 2.1 × 100 mm) and used for the separation of synthetic peptides and proteins. The average numbers of theoretical plates (N) of 52 100/column (174 000/m, 5.75 µm plate height) and 35 500/column (118 000/m, 8.47 µm plate height) were achieved with the 300 mm column at a flow rate of 25 µL/min (0.86 mm/s) in 60:40 v/v acetonitrile/30 mM aqueous ammonium formate for the mixture of peptides (Thr‐Tyr‐Ser, Val‐Ala‐Pro‐Gly, angiotensin I, isotocin, and bradykinin) and for the mixture of proteins (myoglobin, human serum albumin, and insulin), respectively. Fast analysis of the peptides and proteins was also carried out at a flow rate of 0.9 mL/min (6.88 mm/s) with the 100 mm column and all the analytes were eluted within 2 min with good separation efficiency.     

Imidazolium‐embedded iodoacetamide‐functionalized silica‐based stationary phase for hydrophilic interaction/reversed‐phase mixed‐mode chromatography

A novel imidazolium‐embedded iodoacetamide‐functionalized silica‐based stationary phase has been prepared by surface radical chain‐transfer polymerization. The stationary phase was characterized by Fourier transform infrared spectrometry, thermogravimetric analysis, and element analysis. Fast and efficient separations of polar analytes, such as nucleosides and nucleic acid bases, water‐soluble vitamins and saponins, were well achieved in hydrophilic interaction chromatography mode. Additionally, a mixed mode of hydrophilic interaction and reversed‐phase could be also obtained in the analysis of polar and nonpolar compounds, including weak acidic phenols, basic anilines and positional isomers, with high resolution and molecular‐planarity selectivity, outperforming the commercially available amino column. Moreover, simultaneous separation of polar and nonpolar compounds was also achieved. In conclusion, the multimodal retention capabilities of the imidazolium‐embedded iodoacetamide‐functionalized silica‐based column could offer a wide range of retention behavior and flexible selectivity toward hydrophilic and hydrophobic compounds.     

Periodic imidazolium‐bridged hybrid monolith for high‐efficiency capillary liquid chromatography with enhanced selectivity

A novel periodic imidazolium‐bridged hybrid monolithic column was developed. With diene imidazolium ionic liquid 1‐allyl‐3‐vinylimidazolium bromide as both cross‐linker and organic functionalized reagent, a new periodic imidazolium‐bridged hybrid monolithic column was facilely prepared in capillary with homogeneously distributed cationic imidazolium by a one‐step free‐radical polymerization with polyhedral oligomeric silsesquioxane methacryl substituted. The successful preparation of the new column was verified by Fourier transform infrared spectroscopy, scanning electron microscopy, elemental analysis, and surface area analysis. Most interestingly, the bonded amount of 1‐allyl‐3‐vinylimidazolium bromide of the new column is three times higher than that of the conventional imidazolium‐embedded hybrid monolithic column and the specific surface area of the column reached 478 m²/g. The new column exhibited high stability, excellent separation efficiency, and enhanced separation selectivity. The column efficiency reached 151 000 plates/m for alkylbenzenes. Furthermore, the new column was successfully used for separation of highly polar nucleosides and nucleic acid bases with pure water as mobile phase and even bovine serum albumin tryptic digest. All these results demonstrate the periodic imidazolium‐bridged hybrid monolithic column is a good separation media and can be used for chromatographic separation of small molecules and complex biological samples with high efficiency.     

Preliminary results for 2‐D separation with high‐performance thin‐layer chromatography and pressurized planar electrochromatography

Preliminary results of 2‐D separation of test dye mixture using high‐performance thin‐layer chromatography (HPTLC) and pressurized planar electrochromatography (PPEC) are demonstrated. The advantage of 2‐D HPTLC/PPEC separation is based on different separation selectivities obtained in both HPTLC and PPEC systems. HPTLC RP18 W plates of 5×20 cm from Merck were used in the investigations. In the first dimension, a HPTLC process was performed using 5 cm length of the plate and in the second dimension PPEC separation was obtained applying plate of 20 cm length. PPEC process followed prewetting the chromatographic plate with sample zones on it, which were partly separated after first dimensional (HPTLC) separation. In the experiments, the modified version of PPEC device for 20 cm long chromatographic plate and the reservoir for prewetting the adsorbent layer were applied.     

Mesoporous titanium oxide with high‐specific surface area as a coating for in‐tube solid‐phase microextraction combined with high‐performance liquid chromatography for the analysis of polycyclic aromatic hydrocarbons

Stainless‐steel wires coated with mesoporous titanium oxide were placed into a polyether ether ketone tube for in‐tube solid‐phase microextraction, and the coating sorbent was characterized by X‐ray diffraction and scanning electron microscopy. It was combined with high‐performance liquid chromatography to build an online system. Using eight polycyclic aromatic hydrocarbons as the analytes, some conditions including sample flow rate, sample volume, organic solvent content, and desorption time were investigated. Under optimum conditions, an online analysis method was established and provided good linearity (0.03–30 μg/L), low detection limits (0.01–0.10 μg/L), and high enrichment factors (77.6–678). The method was applied to determine target analytes in river water and water sample of coal ash, and the recoveries are in the range of 80.6–106.6 and 80.9–103.5%, respectively. Compared with estrogens and plasticizers, extraction coating shows better extraction efficiency for polycyclic aromatic hydrocarbons.