Highly selective ionic liquid-based microextraction method for sensitive trace cobalt determination in environmental and biological samples

A simple and rapid dispersive liquid-liquid microextraction procedure based on an ionic liquid (IL-DLLME) was developed for selective determination of cobalt (Co) with electrothermal atomic absorption spectrometry (ETAAS) detection. Cobalt was initially complexed with 1-nitroso-2-naphtol (1N2N) reagent at pH 4.0. The IL-DLLME procedure was then performed by using a few microliters of the room temperature ionic liquid (RTIL) 1-hexyl-3-methylimidazolium hexafluorophosphate [C₆mim][PF₆] as extractant while methanol was the dispersant solvent. After microextraction procedure, the Co-enriched RTIL phase was solubilized in methanol and directly injected into the graphite furnace. The effect of several variables on Co-1N2N complex formation, extraction with the dispersed RTIL phase, and analyte detection with ETAAS, was carefully studied in this work. An enrichment factor of 120 was obtained with only 6 mL of sample solution and under optimal experimental conditions. The resultant limit of detection (LOD) was 3.8 ng L⁻¹, while the relative standard deviation (RSD) was 3.4% (at 1 μg L⁻¹ Co level and n = 10), calculated from the peak height of absorbance signals. The accuracy of the proposed methodology was tested by analysis of a certified reference material. The method was successfully applied for the determination of Co in environmental and biological samples.     

Ionic‐liquid‐functionalized magnetic particles as an adsorbent for the magnetic SPE of sulfonylurea herbicides in environmental water samples

In this paper, a new ionic‐liquid‐functionalized magnetic material was prepared based on the immobilization of an ionic liquid on silica magnetic particles that could be successfully used as an adsorbent for the magnetic SPE of five sulfonylurea herbicides (bensulfuron‐methyl, prosulfuron, pyrazosulfuron‐ethyl, chlorimuron‐ethyl and triflusulfuron‐methyl) from environmental water samples. The main parameters affecting the extraction efficiency such as desorption conditions, sample pH, extraction time and so on, were optimized using the Taguchi method. Good linearities were obtained with correlation coefficients ranging from 0.9992 to 0.9999 in the concentration range of 0.1–50 μg L^?1 and the LODs were 0.053–0.091 μg L^?1. Under the optimum conditions, the enrichment factors of the method were 1155–1380 and the recoveries ranged from 77.8 to 104.4%. The proposed method was reliable and could be applied to the residue analysis of sulfonylurea herbicides in environmental water samples (tap, reservoir and river).     

Application of tandem dispersive liquid–liquid microextraction for the determination of doxepin,citalopram, and fluvoxamine in complicated samples

A new type of dispersive liquid–liquid microextraction is used for the determination of doxepin, citalopram, and fluvoxamine in aqueous matrices. This method is based upon the tandem utilization of dispersive liquid–liquid microextraction, and by providing a high sample clean‐up, it efficiently improves the applicability of the method in complicated matrices. For this purpose, in the first step, the analytes contained in an aqueous sample solution (8.0 mL) were extracted into an organic solvent, and then these analytes were simply back‐extracted into an aqueous acceptor phase (50 μL). The overall extraction time was 7 min, and very simple tools were required for this aim. Optimization of the variables affecting the method such as the type and volume of the organic solvent used and effect of ionic strength was carried out to achieve the best extraction efficiency. Under the optimized experimental conditions, tandem dispersive liquid–liquid microextraction with high‐performance liquid chromatography and UV detection showed a good linearity in the range of 10–5000 ng/mL. The limits of detection were in the range of 3–10 ng/mL. The Intra‐day precisions (relative standard deviation) were 9.2, 4.5, and 4.8, and the recoveries were 58.5, 52.9, and 39.3% for citalopram, doxepin, and fluvoxamine, respectively.     

Extraction and preconcentration of tylosin from milk samples through functionalized TiO2 nanoparticles reinforced with a hollow fiber membrane as a novel solid/liquid‐phase microextraction technique

The aim of this study was to introduce a novel, simple, and highly sensitive preparation method for determination of tylosin in different milk samples. In the so‐called functionalized TiO₂ hollow fiber solid/liquid‐phase microextraction method, the acceptor phase is functionalized TiO₂ nanoparticles that are dispersed in the organic solvent and held in the pores and lumen of a porous polypropylene hollow fiber membrane. An effective functionalization of TiO₂ nanoparticles has been done in the presence of aqueous H₂O₂ and a mild acidic ambient under UV irradiation. This novel extraction method showed excellent extraction efficiency and a high enrichment factor (540.2) in comparison with conventional hollow fiber liquid‐phase microextraction. All the experiments were monitored at λ_max = 284 nm using a simple double beam UV‐visible spectrophotometer. A Taguchi orthogonal array experimental design with an OA₁₆ (4⁵) matrix was employed to optimize the factors affecting the efficiency of hollow fiber solid/liquid‐phase microextraction such as pH, stirring rate, salt addition, extraction time, and the volume of donor phase. This developed method was successfully applied for the separation and determination of tylosin in milk samples with a linear concentration range of 0.51–7000 μg/L (r² = 0.991) and 0.21 μg/L as the limit of detection.     

Determination of aromatic amines in environmental water samples by deep eutectic solvent-based dispersive liquid-liquid microextraction followed by HPLC-UV

This study reports a deep eutectic solvent based dispersive liquid-liquid microextraction (DES-DLLME) to extract aromatic amines (4-chloroaniline, 3-nitroaniline, 2-naphtylamine) in environmental water samples before their HPLC-UV determination. The hydrophobic deep eutectic solvent (DES) was prepared by mixing bis(2-ethylhexyl) phosphate (BEHP) as a hydrogen bond acceptor and phenol as a hydrogen bond donor. Affecting factors on the extraction of the aromatic amines were investigated and optimized. Optimum conditions were: DES type: BHHP-Ph ratio: 1 to 2; pH of solution: 8.0; DES volume: 80 µL, salt amount: 10% (w/v). Under optimum conditions, the developed method showed a wide linear range of 0.2–200 µg L^?1 (R² ≥ 0.99) with satisfactory recoveries (≥90.0%). The limit of detections (LODs) and limit of quantifications (LOQs) were in the range of 0.07–0.17 µg L^?1 and 0.2–0.5 µg L^?1, respectively. The enrichment factors were 170, 180 and 190 for 4-chloroaninile, 3-nitroaniline, 2-naphtylamine, respectively. Based on obtained results, the proposed method is straightforward, efficient, sensitive, and eco-friendly for the extracting and determining of the aromatic amines in environmental water samples.     

Screening the extractability of some typical environmental pollutants by ionic liquids in liquid-phase microextraction

The extractability of some typical environmental pollutants in ionic liquids (ILs) was screened by using a simple one-step liquid phase microextraction procedure. It was demonstrated that 1-alkyl-3-methylimidazolium hexafluorophosphate ([CnMIM][PF6], n = 4, 8), two typical ILs, could effectively extract a set of 45 typical environmental pollutants including BTEX (benzene, toluene, ethylbenzene, and xylene), polycyclic aromatic hydrocarbons, phthalates, phenols, aromatic amines, herbicides, organotin, and organomecury. Analytes in 10 mL sample solution held in a 15 mL vial were extracted by a 5 microL drop of ILs suspended on the needle of a high-performance liquid chromatography (HPLC) microsyringe; this was followed by HPLC, atomic absorption spectrometry, or cold-vapor atomic fluorescence spectrometry determination. The enrichment factors determined were in the range of 5-168 for 15 min extraction by [C4MIM][PF6] and 4-178 for 30 min extraction by [C8MIM][PF6], respectively, which indicates that ILs might be considered as potential environmentally benign alternative recyclable solvents for the enrichment of environmental pollutants.     

Whirling agitated single drop microextraction technique for the simultaneous analysis of Paraquat and Maneb in tissue samples of treated mice

A new microextraction technique, whirling agitated single drop microextraction, has been proposed for the simultaneous analysis of Paraquat and Maneb in tissue samples before liquid chromatography with tandem mass spectrometry. This technique is based on the idea that the escalatory motion of the sample solution along with the extraction solvent increases the movement of molecules into the extraction solvent. In this technique, a simple handheld rotator was utilized to rapidly agitate the biphasic extraction system for the instantaneous extraction of targeted analytes. After extraction, the extracted phase was directly solidified by cooling in crushed ice and easily collected using a micro‐spatula. The method showed good performance by achieving sensitive detection limits at 4.81 ng g^?1 (Paraquat) and 9.12 ng g^?1 (Maneb). Mean recoveries and enrichment factors were obtained >91.21% and up to 114 that ensured the preconcentration capacity of the method. The method precision was verified by evaluating intraday variation (n = 10) ≤4.57 (Paraquat) and ≤4.68 (Maneb) in terms of percent relative standard deviation. Additionally, method efficacy was assured by obtaining very little matrix interferences (≤3.11%). Moreover, the method suitability was also checked with its application on tissue samples of intraperitoneally treated mice with Paraquat and Maneb.     

Ionic liquids based single drop microextraction combined with electrothermal vaporization inductively coupled plasma mass spectrometry for determination of Co,Hg and Pb in biological and environmental samples

A new method of ionic liquids based cycle flow single drop microextraction combined with electrothermal vaporization inductively coupled plasma mass spectrometry (ETV-ICP-MS) was proposed for the determination of trace Co, Hg and Pb with 1-(2-pyridylazo)-2-naphthol (PAN) as both extractant and chemical modifier and 1-butyl-3-methylimidazolium hexafluorophosphate as the extraction solvent. Several factors that influence the microextraction efficiency, such as sample pH, sample flow rate, microdrop volume and extraction time, were investigated and the optimized microextraction conditions were established. Co, Hg and Pb in the post-extraction ionic liquids phase were directly determined by ETV-ICP-MS with the use of PAN as chemical modifier. The chemical modification of PAN in ETV-ICP-MS was studied and the factors affecting the vaporization behaviors of target analytes were investigated. Under the optimized conditions, the detection limits of the method were 1.5, 9.8 and 6.7 pg/mL for Co, Hg and Pb, with the relative standard deviations for 0.5 ng/mL (n = 7) of Co, Hg and Pb were 7.7%, 5.2% and 12.0%, respectively. After 10 min of extraction, the enrichment factors were 350 (Co), 50 (Hg) and 60 (Pb). The proposed method was successfully applied to the determination of trace Co, Hg and Pb in human serum and environmental water samples. In order to validate the developed method, a certified reference material of human hair (GBW07601) was analyzed and the determined values were in good agreement with the certified values.     

PPb Level Monitoring of Dy(III) Ions by a Highly Sensitive and Selective Dy(III) Sensor Based on a New Asymmetrical Schiff's Base

Abstract

A Dy(III) ion‐selective membrane sensor has been fabricated from polyvinyl chloride (PVC) matrix membrane containing a new asymmetrical Schiff's base [(E)‐N‐(2‐hydroxybenzylidene)benzohydraide] or BBH as a neutral carrier, sodium tetraphenyl borate (NaTPB) as an anionic excluder and nitrobenzene (NB) as a plasticizing solvent mediator. The membrane sensor displays linear potential response in the concentration range of 1.0×10^?2–1.0×10^?6 M of Dy(III). The electrode exhibits a nice Nernstian slope of 20.1±0.8 mV/decade in the pH range of 3.0–8.0. The sensor has a relatively short response time in whole concentration ranges (<20 s). The detection limit of the proposed sensor is 8.0×10^?7 M (～128 ng/mL), and it can be used over a period of six weeks. The selectivity of the proposed sensor with respect to other cations, (alkali, alkaline earth, transition and heavy metal ions) and especially lanthanid ions, is excellent. The practical utility of the sensor has been demonstrated by using it as an indicator electrode in the potentiometric titration of Dy(III) with EDTA.     

New heteropolynuclear metallomesogens: copper(II), palladium(II), nickel(II) and oxovanadium(IV) chelates with [3]ferrocenophane‐containing Schiff's base and β‐aminovinylketone

New mesogenic heteropolynuclear complexes of Cu(II), Pd(II), Ni(II) and VO(IV) with the [3]ferrocenophane‐containing Schiff's base, and Cu(II) and Pd(II) complexes with the [3]ferrocenophane‐containing β‐aminovinylketone have been synthesised. The obtained heterometallic mesogenes are identified by elemental analysis, proton nuclear magnetic resonance, infrared and ultraviolet–visible spectroscopies. Liquid crystalline properties are studied by thermal polarising optical microscopy and differential scanning calorimetry techniques. Both ligands and heteropolynuclear complexes exhibit thermotropic nematic and smectic C mesophases in various temperature ranges except for the Ni(II) complex. Mesomorphism of the prepared complexes is correlated with the geometry of their central chelate core. Considerably broader mesophases and lower transition temperatures are achieved in the synthesised metallomesogens by using the alkylidene‐bridged ferrocene as a building unit.     

Analytical developments and applications of ionic liquids for environmental studies

Ionic liquids (ILs) are considered advanced solvents with interesting properties that have led to remarkable improvements in the performance of analytical methods and their practical application. Analytical chemistry has profited from the evolution of ILs in diverse contexts, ranging from their applications in microextractions to uses as matrices for mass spectrometric determinations. Their use in sample preparation has meant significant improvements in terms of miniaturization and analytical performance, and given place to new techniques based on liquid-liquid and solid-phase extractions; the latter greatly driven forward by the combination of ILs with nanomaterials. Furthermore, electrodes have been prepared by combining ILs with different modern materials, significantly improving the sensitivity and selectivity of electroanalytical methods. Moreover, the implementation of ILs as additives to mobile and stationary phases in separation techniques has been proved to improve liquid and gas chromatography, as well as capillary electrophoresis, in terms of the number of analytes that can be efficiently separated and of the useful life of columns, representing also a promising alternative to environmentally dangerous organic solvents. Additionally, their application as matrix modifiers and as ion-pairing additives has introduced their use in mass spectrometry. In this review, the design and implementation of innovative and highly efficient analytical methods based on ILs for the sensitive and selective determination of diverse analytes in environmental matrices is described. Critical issues that have arisen from their application and future challenges in electrochemical, separation and preconcentration techniques based on these solvents are also presented.     

Synthesis of Schiff's bases in aqueous medium: a green alternative approach with effective mass yield and high reaction rates

Abstract

Schiff's bases constitute a class of pharmaceutical and medicinally important molecules. The conventional methods for the synthesis of Schiff's bases require long reaction times and use of organic solvents. We report a novel and eco-friendly condensation reaction method permitting the “green synthesis” of various Schiff's bases by stirring 1,2-diaminobenzene with various aromatic aldehydes in water as solvent. This method is experimentally simple, clean, high yielding, green, and with reduced reaction times. The product is purified by simple filtration followed by washing with water and drying processes.     

Ultrastiff Hydrogels Prepared by Schiff's Base Reaction of Bis(p‐Formylphenyl) Sebacate and Pillar[5]arene Appended with Multiple Hydrazides

Herein a facile method is reported to prepare polymer gels based on the formation of acylhydrazone bond under mild conditions. A pillar[5]arene derivative appended with ten hydrazide groups provides multiple sites for the reaction with the aldehyde groups of bis(p‐formylphenyl) sebacate in the presence of a small amount of HCl as the catalyst in dimethyl sulfoxide (DMSO), producing transparent polymer organogels. The mechanical properties of gels can be easily tuned by the molar ratio of the reactant compounds. After solvent exchange from DMSO to water, translucent polymer hydrogels with dramatically enhanced strength and stiffness are obtained. The tensile breaking stress and Young's modulus of hydrogels are 20−60 and 1.2–2.7 MPa, respectively, 100 and 20 times those of the corresponding organogels. These robust hydrogels with ultrahigh stiffness should find applications such as in load‐bearing artificial organs. This work should merit designing functional materials using other macrocycles.

     

Determination of Cd, Cu, Pb and Zn in environmental samples: microwave-assisted total digestion versus aqua regia and nitric acid extraction

We validated the determination of the content of Cd, Cu, Pb and Zn using two digestion protocols: a microwave-assisted total digestion and an aqua regia extraction procedure based on the International Organization for Standardisation (ISO) 11466 method. Our goal in validating these two protocols, along with a nitric acid digestion, is to propose a rapid, cheap and easily automated digestion method for monitoring heavy metal content in environmental samples. We applied the digestion protocols to samples with a wide range of organic matter such as sediments, soils, sludges and plant material.For samples with a low carbonate or organic matter contents, such as sediments and agricultural soils, aqua regia digestion in an aluminium block was revealed to be an optimum estimator for the total metal content. For samples with a high organic matter content, such as organic horizons of forest floor layers, plant material and organic soils, nitric acid digestion could substitute microwave (MW)-hydrofluoric acid (HF) digestion. Except in a few samples with high organic matter or low heavy metal content, the RSD values obtained after the application of the proposed digestion procedures were lower than 5%. Based on the obtained results, a decision flow chart for choosing the fit-for-purpose digestion procedure is suggested.     

Electrocatalytic Reduction of Dioxygen at Carbon Paste Electrode Modified with a Novel Cobalt(III) Schiff's Base Complex

A carbon paste modified electrode with a new cobalt(III) Schiff's base complex (CPME) and its application to electrocatalytic activity for dioxygen reduction is developed. The electrochemical behavior and stability of the CPME as well as the two‐electron reduction of O₂ at the electrode were investigated using cyclic voltammetry, chronoamperometry and rotating disk electrode methods. At the CPME, the reduction of dioxygen to hydrogen peroxide occurs at potentials where it is not observed at a bare carbon paste electrode. The CPME exhibited potent and persistent electrocatalysis for O₂ reduction in acetate buffer solutions of pH 4.0 with an overpotential of about 800 mV lower than unmodified CPE and drastic increase in the peak current. The heterogeneous rate constant for the reduction of O₂ at the surface of CPME was determined by hydrodynamic voltammetry using the Koutecky–Levich plot. A possible catalytic mechanism is proposed and discussed.     

A novel microextraction technique based on 1-hexylpyridinium hexafluorophosphate ionic liquid for the preconcentration of zinc in water and milk samples

A simple dispersive liquid-liquid microextraction methodology based on the application of 1-hexylpyridinium hexafluorophosphate [HPy][PF₆] ionic liquid (IL) as an extractant solvent was proposed for the preconcentration of trace levels of zinc as a prior step to determination by flame atomic absorption spectrometry (FAAS). Zinc was complexed with 8-hydroxyquinoline (oxine) and extracted into ionic liquid. Some effective factors that influence the microextraction efficiency such as pH, oxine concentration, amount of IL, ionic strength, temperature and centrifugation time were investigated and optimized. In the optimum experimental conditions, the limit of detection (3 s) and the enhancement factor were 0.22 μg L⁻¹ and 71, respectively. The relative standard deviation (RSD) for six replicate determinations of 13 μg L⁻¹ Zn was 1.92%. In order to validate the developed method, a certified reference material (NIST SRM 1549) was analyzed and the determined values were in good agreement with the certified values. The proposed method was successfully applied to the trace determination of zinc in water and milk samples.     

Ionic‐liquid‐assisted microwave distillation coupled with headspace single‐drop microextraction followed by GC–MS for the rapid analysis of essential oil in Dryopteris fragrans

A rapid, green and effective miniaturized sample preparation technique, ionic‐liquid‐assisted microwave distillation coupled with headspace single‐drop microextraction was developed for the extraction of essential oil from dried Dryopteris fragrans. 1‐Ethyl‐3‐methylimidazolium acetate was the optimal ionic liquid as the destruction agent of plant cell walls and microwave absorption was medium. n‐Heptadecane (2.0 μL) was adopted as the suspended microdrop solvent in the headspace for the extraction and concentration of essential oil. The optimal parameters of the proposed method were an irradiation power of 300 W, sample mass of 0.9 g, mass ratio of ionic liquids to sample of 2.8, extraction temperature of 79°C, and extraction time of 3.6 min. In comparison to the previous reports, the proposed technique could equally monitor all the essential oil components with no significant differences in a simple way, which was more rapid and required a much lower amount of sample.     

Displacement-dispersive liquid-liquid microextraction coupled with graphite furnace atomic absorption spectrometry for the selective determination of trace silver in environmental and geological samples

A novel displacement-dispersive liquid-liquid microextraction method was developed for the selective determination of trace silver in complicated samples by graphite furnace atomic absorption spectrometry. This method involves two steps of dispersive liquid-liquid microextraction (DLLME). Firstly, copper ion reacted with diethyldithiocarbamate (DDTC) to form Cu-DDTC complex and extracted with DLLME procedure using carbon tetrachloride (extraction solvent) and methanol (dispersive solvent); then, the sedimented phase was dispersed into the sample solution containing silver ion with methanol and another DLLME procedure was carried out. Because the stability of Ag-DDTC is larger than that of Cu-DDTC, Ag⁺ can displace Cu²⁺ from the pre-extracted Cu-DDTC and thus the preconcentration of Ag⁺ was achieved. Potential interference from co-existing transition metal ions with lower DDTC complex stability was largely eliminated as they cannot displace Cu²⁺ from Cu-DDTC complex. The tolerance limits for the co-existing ions were increased by a long way compared with conventional DLLME. Under the optimal conditions, the limit of detection was 20 ng L⁻¹ (3σ) for silver with a sample volume of 5.0 mL, and an enhancement factor of 72 was achieved. The proposed method was successfully applied to determine of trace silver in some environmental and geological samples with satisfactory results.     

Solid Phase Extraction and Determination of Trace Amounts of Lead(II) Using Octadecyl Membrane Disks Modified by a New Schiff's Base and Flame Atomic Absorption Spectrometry

A highly selective, facile and reliable method for separation and preconcentration of the trace amounts of lead present in aqueous samples is introduced. By passing the solutions through an octadecyl silica membrane disk modified by a novel Schiff's base, Pb²⁺ ions are adsorbed quantitatively while almost all interfering ions pass through the disk. The retained lead(II) ions are then eluted from the disk surface by a minimal amount of organic eluents. The influences of pH, sample flow‐rates and interfering ions are also investigated. The proposed method permits an enrichment factor of about 500 or higher and a detection limit of 0.0065 ng mL^?;1.     

Determination of trace Cd and Pb in environmental and biological samples by ETV-ICP-MS after single-drop microextraction

A method based on single-drop microextraction (SDME) combined with electrothermal vaporization (ETV)-ICP-MS was proposed for the determination of trace Cd and Pb. 8-Hydroxyquinoline (8-HQ) was employed as extractant dissolved in several microliters of chloroform and then an organic microdrop was formed at the tip of the microsyringe needle to extract the interest analytes. The vaporization behavior of the metal-8-HQ chelates in graphite furnace was investigated, and the ETV temperature program was optimized. The factors that influenced the extraction efficiency of target analytes (including pH value, flow rate of sample, extraction time and organic microdrop volume) were studied. Under the optimum conditions, the detection limits of the Cd and Pb were 4.6 and 2.9 pg mL⁻¹ with the enrichment factor of 140-fold for Cd and 190-fold for Pb, respectively. The proposed method was applied successfully to the determination of trace Cd and Pb in environmental and biological samples. In order to validate the developed method, a certified reference material of GBW 08501 peach leaves was analyzed and the determined values obtained were in a good agreement with the certified values.