Enhanced binding by dextran‐grafting to Protein A affinity chromatographic media

Dextran‐grafted Protein A affinity chromatographic medium was prepared by grafting dextran to agarose‐based matrix, followed by epoxy‐activation and Protein A coupling site‐directed to sulfhydryl groups of cysteine molecules. An enhancement of both the binding performance and the stability was achieved for this dextran‐grafted Protein A chromatographic medium. Its dynamic binding capacity was 61 mg immunoglobulin G/mL suction‐dried gel, increased by 24% compared with that of the non‐grafted medium. The binding capacity of dextran‐grafted medium decreased about 7% after 40 cleaning‐in‐place cycles, much lower than that of the non‐grafted medium as decreased about 15%. Confocal laser scanning microscopy results showed that immunoglobulin G was bound to both the outside and the inside of dextran‐grafted medium faster than that of non‐grafted one. Atomic force microscopy showed that this dextran‐grafted Protein A medium had much rougher surface with a vertical coordinate range of ±80 nm, while that of non‐grafted one was ±10 nm. Grafted dextran provided a more stereo surface morphology and immunoglobulin G molecules were more easily to be bound. This high‐performance dextran‐grafted Protein A affinity chromatographic medium has promising applications in large‐scale antibody purification.     

Interactions between an amphipathic di‐histidine peptide and a metal affinity chromatographic resin derived from a bis(tacn)butane chelating ligand

The interactive behavior of an amphipathic peptide with the Cu²⁺, Ni²⁺, and Zn²⁺ complexes of 1,4‐bis(triazacyclonon‐1‐yl)butane), bis(tacn)^but, immobilized onto Sepharose CL‐4B, has been investigated. The effects of incubation time, as well as the incubation buffer pH and ionic strength, have been examined. The binding data have been interrogated using Langmuir, Langmuir‐Freundlich, bi‐Langmuir, and Temkin isothermal models and Scatchard plots. These results confirm that this amphipathic peptide binds with relatively high capacities to the immobilized Cu²⁺‐ and Ni²⁺‐1,4‐bis(triazacyclonon‐1‐yl)butane)‐Sepharose CL‐4B sorbents via at least two discrete sites. However, the corresponding immobilized Zn²⁺‐sorbent had low binding capacity. Moreover, the magnitude of the binding capacities of these sorbents was dependent on the pH and ionic strength of the incubation buffer. These results are relevant to the isolation of E. coli expressed recombinant proteins that incorporate this and related amphipathic peptide tags, containing two or more histidine residues, located at the N‐ or C‐terminus of the recombinant protein, and the co‐purification of low abundance host cell proteins of diverse structure, by immobilized metal ion affinity chromatographic methods.     

一步法制备PNIPAAm-g-PAN/PSt载银复合微球及其抗菌性能研究

以AgNO3为金属源,通过乙醇将与聚N-异丙基丙烯酰胺接枝聚丙烯腈/聚苯乙烯（PNIPAAm-g-PAN/PSt）聚合物微球表面酰胺基团配位的银离子（Ag+）还原,一步法制备了PNIPAAm-g-PAN/PSt载银复合微球。通过傅立叶变换红外（FTIR）和紫外-可见光光谱表征发现,由Ag+还原所得的Ag纳米颗粒被成功地固载在PNIPAAm-g-PAN/PSt 微球上;用透射电子显微镜（TEM）对载银微球的大小和形态进行了表征;热重分析（TGA）结果表明,固载在微球表面的银纳米颗粒的含量（质量分数）为12%;抗菌实验结果表明,所制备的载银微球具有抗革兰氏阴性菌的活性。     

Studies on the Thermodenaturation Behavior of Bacillus subtilis α‐Amylase on Chromatographic Media

The thermodenaturation behavior of Bacillus subtilis α‐amylase on some chromatographic media was studied by determining their adsorption parameters with frontal analysis. The experimental results show that on a RP‐C₁₈ reversed‐phase medium, a Chelating Sepharose Fast‐Flow chelated by Zn²⁺ affinity medium and a WCX‐1 cation‐exchange medium, a stable conformation of α‐amylase molecule separately exists below or over 30 °C; while on a PEG‐400 hydrophobic medium and a modified PEG‐400 medium, a stable conformation of α‐amylase molecule separately exists below 40 and 30 °C, and when the experimental temperatures are separately over 40 and 30 °C, a drastically conformational change of α‐amylase molecules can continuously take place. And by combining the intrinsic fluorescence emission spectrum and thermal inactivation profile of α‐amylase in free solution and on the PEG‐400 and modified PEG‐400 hydrophobic media, it can be concluded that in liquid chromatographic procedure, chromatographic media can induce the conformational change of α‐amylase molecules and promote their thermodenaturation; and in hydrophobic interaction chromatography, the higher the hydrophobicity of chromatographic medium, the lower the conformational change temperature of α‐amylase molecules on the chromatographic medium.     

Use of specific polysaccharide‐immobilized monodisperse poly(glycidyl methacrylate) core–silica shell microspheres for affinity purification of lectins

Immobilization of polysaccharides (yeast mannan and gum arabic) on the macroporous poly(glycidyl methacrylate) monodisperse microspheres coated with silica (SiO₂)‐containing amino groups on the surface was used to prepare affinity sorbents for lectin purification. The efficiency of isolating mannose specific Pisum sativum lectin was demonstrated on sorbent with immobilized yeast mannan and that of galactose specific Glycine hispida lectin on sorbent with immobilized gum arabic. The microspheres with immobilized polysaccharides can be used for selecting an affinity sorbent for purification of other mannose‐ and galactose‐specific lectins. In contrast to yeast mannan, the gum arabic immobilized on the microspheres possesses much narrower specificity and is suitable for purification of only those galactose specific lectins which interact well with l ‐rhamnose or l ‐arabinose. The synthesized macroporous particles are capable of immobilizing 50 mg of polysaccharide per 1 g of the matrix, which is 10 times higher than the capacity of epoxy‐activated Sepharose 6B. That makes it possible to obtain the same lectin quantity using a column of 10 times smaller volume. Another advantage of novel affinity sorbents comparing corresponding Sepharose gels is the possibility of sorbent drying after use. Copyright © 2014 John Wiley & Sons, Ltd.     

Chromatographic behaviour of monoclonal antibodies against wild-type amidase from Pseudomonas aeruginosa on immobilized metal chelates

The aim of this work was to devise a one‐step purification procedure for monoclonal antibodies (MAbs) of IgG class by immobilized metal affinity chromatography (IMAC). Therefore, several stationary phases were prepared containing immobilized metal chelates in order to study the chromatographic behaviour of MAbs against wild‐type amidase from Pseudomonas aeruginosa. Such MAbs adsorbed to Cu(II), Ni(II), Zn(II) and Co(II)–IDA agarose columns. The increase in ligand concentration and the use of longer spacer arms and higher pH values resulted in higher adsorption of MAbs into immobilized metal chelates. The dynamic binding capacity and the maximum binding capacity were 1.33 ± 0.015 and 3.214 ± 0.021 mg IgG/mL of sedimented commercial matrix, respectively. A K_D of 4.53 × 10⁻⁷ m was obtained from batch isotherm measurements. The combination of tailor‐made stationary phases of IMAC and the correct selection of adsorption conditions permitted a one‐step purification procedure to be devised for MAbs of IgG class. Culture supernatants containing MAbs were purified by IMAC on commercial‐Zn(II) and EPI‐30–IDA–Zn(II) Sepharose 6B columns and by affinity chromatography on Protein A‐Sepharose CL‐4B. This MAb preparation revealed on SDS–PAGE two protein bands with M_r of 50 and 22 kDa corresponding to the heavy and light chains, respectively. Copyright © 2011 John Wiley & Sons, Ltd.     

枯草杆菌α-淀粉酶在一些色谱体系中的热力学和超热力学研究

通过测定不同温度范围的热力学平衡常数、焓变、熵变、自由能变和补偿温度,研究了枯草杆菌α-淀粉酶在几种色谱介质上的热力学和超热力学。结果表明,在RP-C18反相介质、Zn2+螯合的Sepharose fast-flow亲和介质和WCX-1阳离子交换介质上,当温度分别在13-30和30-50℃范围时,它们的lnKSL分别随绝对温度的倒数线性变化;而在PEG-400和修饰的PEG-400疏水色谱介质上,当温度分别在13-40和13-30℃范围时,它们的lnKSL分别随绝对温度的倒数线性减小,但当温度分别高于40℃和30℃时,它们则随绝对温度的倒数剧烈减小。通过研究不同温度范围的焓变、熵变、自由能变和α-淀粉酶构象变化之间的关系,发现在RP-C18反相和Zn2+螯合的Sepharose fast-flow亲和介质上在30- 50 ℃温度范围内,在WCX-1阳离子交换介质上在13-30 ℃温度范围内,α-淀粉酶的吸附过程由焓变和熵变共同所支配,而在Zn2+螯合的Sepharose fast-flow亲和介质上在13- 30 ℃温度范围内,在WCX-1阳离子交换介质上在30-50 ℃温度范围和在PEG-400 和修饰的PEG-400疏水色谱介质上在13-65 ℃温度范围时,α-淀粉酶的吸附过程仅仅由熵变所控制。最后,通过α-淀粉酶在这些色谱体系中的补偿温度进一步发现,它们的焓变仅仅只能通过它们构象变化所引起的熵变所补偿。     

Facile Access to Hydroxy‐Functional Core–Shell Microspheres via Grafting of Ethylene Oxide by Anionic Ring‐Opening Polymerization

We present a facile access route to hydroxy‐functional narrow disperse microspheres of well‐defined grafting density (GD). Ethylene oxide has been grafted from highly crosslinked poly(divinyl benzene) microspheres by anionic ring‐opening polymerization using sec‐butyllithium as activator together with the phosphazene base t‐BuP₄. Initially, core microspheres have been prepared by precipitation polymerization utilizing divinyl benzene (DVB, 80 wt.‐%). The grafting of poly(ethylene oxide) (PEO) from the surface resulted in the formation of functional core–shell microspheres with hydroxy‐terminal end groups. The number average particle diameter of the grafted microspheres was 3.6 µm and the particle weight increased by 5.7%. The microspheres were characterized by SEM, FT‐IR spectroscopy, elemental analysis, and fluorescence microscopy. The surface GD (determined via two methods) was 1.65 ± 0.06 and 2.09 ± 0.08 chains · nm⁻², respectively.

     

Thermoresponsive hydrophobic copolymer grafted on agar microspheres for all‐aqueous bioseparations

Agar microspheres were prepared by water–oil emulsification and cross‐linked under alkaline condition. The thermoresponsive hydrophobic copolymer, poly(N‐isopropylacrylamide‐co‐lauryl methacrylate‐co‐acrylamide), was grafted on the agar microspheres via atom transfer radical polymerization. The agar microspheres grafted with copolymers were characterized by light microphotography, elemental analysis, Fourier transform infrared spectroscopy, scanning electron microscopy, and X‐ray photoelectron spectroscopy. The chain lengths and hydrophobic monomer ratio of the grafting linear polymer had significant effects on the hydrophobicity and adsorption capacity of agar microspheres at different temperatures. The thermoresponsive microspheres were used for separation of proteins and showed binding and release behavior by change of temperatures without change in mobile phase composition. Thus, we suggest thermoresponsive agar microspheres as an alternative separation media for all‐aqueous bioseparations.     

Preparation of Immobilized Metal Affinity Chromatographic Packings Based on Monodisperse Hydrophilic Non‐porous Beads and Their Application

Three hydrophilic immobilized metal affinity chromatographic packings for HPLC have been synthesized by chemical modification of 3.0 µm monodisperse non‐porous poly(glycidyl methacrylate‐co‐ethylenedimethacrylate) (P_GMA/EDMA) beads. The retention behavior of proteins on the metal ion chelated columns loaded with copper(II), nickel(II) and zin(II) ion was studied. The effect of pH on the protein retention was investigated on both the naked and metal ion chelated columns in the range from 4.0 to 9.0. Four proteins were quickly separated in 3.0 min with linear gradient elution at a flow rate of 3.0 mL/min by using the synthesized Ni²⁺‐IDA (iminodiacetic acid) packings. The separation time was shorter than other immobilized metal affinity chromatography reported in the literature. Purification of lysozyme from egg white and trypsin on the commercially available trypsin was performed on the naked‐IDA and Cu²⁺‐IDA columns, respectively. The purities of the purified trypsin and lysozyme were more than 92% and 95%, respectively.     

Magnetic Silica‐Coated Sub‐Microspheres with Immobilized Metal Ions for the Selective Removal of Bovine Hemoglobin from Bovine Blood

Magnetic silica‐coated magnetite (Fe₃O₄) sub‐microspheres with immobilized metal‐affinity ligands are prepared for protein adsorption. First, magnetite sub‐microspheres were synthesized by a hydrothermal method. Then silica was coated on the surface of Fe₃O₄ particles using a sol–gel method to obtain magnetic silica sub‐microspheres with core‐shell morphology. Next, the trichloro(4‐chloromethylphenyl) silane was immobilized on them, reacted with iminodiacetic acid (IDA), and charged with Cu²⁺. The obtained magnetic silica sub‐microspheres with immobilized Cu²⁺ were applied for the absorption of bovine hemoglobin (BHb) and the removal of BHb from bovine blood. The size, morphology, and magnetic properties of the resulting magnetic micro(nano) spheres were investigated by using scanning microscopy (SEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD), and a vibrating sample magnetometer (VSM). The measurements showed that the magnetic sub‐microspheres are spherical in shape, very uniform in size with a core‐shell, and are almost superparamagnetic. The saturation magnetization of silica‐coated magnetite (Fe₃O₄) sub‐microspheres reached about 33 emu g^?1. Protein adsorption results showed that the sub‐microspheres had a high adsorption capacity for BHb (418.6 mg g^?1), low nonspecific adsorption, and good removal of BHb from bovine blood. This opens a novel route for future applications in removing abundant proteins in proteomic analysis.     

新型的钛基Ni-Sn/Ti电极的制备及对甲醇氧化反应的电催化活性

利用电热法,一步制备出新型的钛基Ni-Sn/Ti电极(Ni8Sn/Ti, Ni7Sn3/Ti 和 Ni/Ti)。扫描电镜（SEM）图像表明,催化剂以片状的纳米颗粒形式沉积于钛基体上。利用电化学伏安技术、电位阶跃法和电化学交流阻抗谱（EIS）,研究了这些电极在1mol.L�1NaOH溶液中对甲醇氧化反应的电催化活性。研究表明,与Ni7Sn3/Ti,Ni/Ti以及多晶镍电极相比,Ni8Sn/Ti电极对甲醇氧化反应表现出更高的阳极氧化电流和更低的起始电位。EIS分析表明,在本文所考察的阳极电位和甲醇浓度下,Ni8Sn/Ti电极对甲醇氧化反应显示出极低的电荷传递电阻。结果表明,这种新型的钛基Ni8Sn/Ti电极对甲醇氧化反应具有极高的电催化活性。     

Application of heptapeptides containing D-amino acid residues immobilized to magnetic particles and Sepharose for the study of binding properties of gastric aspartic proteases

Synthetic heptapeptides containing D-amino acid residues and differing in the content of L-phenylalanine and L-tyrosine residues and their position (Val-D-Leu-Pro-Tyr-Phe-Val-D-Leu, Val-D-Leu-Pro-Tyr-Tyr-Val-D-Leu, Val-D-Leu-Pro-Phe-Tyr-Val-D-Leu) were immobilized to two types of carriers: glyoxal-activated magnetic agarose particles and CNBr-activated Sepharose. In both cases, peptides were immobilized via their terminal amino group. Immobilized peptides were used for the study of binding properties of two gastric aspartic proteases (porcine pepsin A and rat pepsin C). Porcine pepsin A was adsorbed to all studied peptide-modified magnetic carriers, while rat pepsin C interacted with immobilized ligands only slightly. Similar results were obtained in affinity chromatographic experiments using heptapeptides immobilized to Sepharose.     

Novel affinity monolithic column modified with cuprous sulfide nanoparticles for the selective enrichment of low‐molecular‐weight electron‐rich analytes

A novel monolithic column modified with cuprous sulfide nanoparticles was developed and its affinity characteristics towards low‐molecular‐weight electron‐rich analytes were investigated. In the synthesis process, home‐made cuprous oxide nanocubes were immobilized on the surface of monolithic skeleton with the moderate thickness based on the strong interaction between imidazole groups and cuprous oxide, then the cuprous oxide layer was transformed into the more stable cuprous sulfide layer through the treatment by sodium sulfide. The resulting cuprous sulfide modified monolithic column presented good permeability and stability in a wide pH range from 2 to 10. Two kinds of typical electron‐rich analytes, kanamycin A and purine, were chosen to assess its affinity characteristics. Compared with the commercial Cu²⁺‐ and Ni²⁺‐based affinity sorbents, a larger binding capacity of cuprous sulfide modified column toward kanamycin A was obtained under basic condition and the recovery of kanamycin A in a milk sample was over 70%. Moreover, the binding capacity of cuprous sulfide modified column for purine was up to 5.57 mg/mL in frontal elution mode. These results suggested that the Cu₂S column has a promising application for the enrichment of electron‐rich analytes.     

Micropatterning of proteins on ion beam‐induced poly(acrylic acid)‐grafted polyethylene film

Micropatterns of proteins were created by using patterned ion beam irradiation onto a polyethylene film and graft polymerization of acrylic acid. Acrylic acid was selectively graft polymerized on the irradiated regions. The results of the grafting study revealed that the optimum fluence to achieve the maximum grafting degree was 1 × 10¹⁵ ions/cm². Biotin was covalently immobilized on the grafted regions of the polyethylene film. Protein patterning was achieved through specific binding of biotin and streptavidin. The resolved protein patterns with the maximum fluorescence intensity were achieved on the poly(acrylic acid) (PAA)‐grafted polyethylene films prepared at the fluence of 1 × 10¹⁵ ions/cm². This method can be used for patterning of various biomolecules and for further biological applications. Copyright © 2010 John Wiley & Sons, Ltd.     

Preparation of Immobilized Metal Affinity Chromatographic Packings by Immobilization of Carboxymethylated Asparate (CM-Asp) Based on Monodisperse Hydrophilic Non-porous Beads and Their Application

The hydrophilic immobilized metal affinity chromatographic packing was prepared by immobilization of carboxymethylated asparate (CM‐Asp) as chelating ligand and Ni²⁺ as center ion on the base of monodispersed, 3.0 µm non‐porous monodisperse poly(glycidylmethacrylate‐co‐ethylenedimethacrylate) (P_GMA/EDMA) particles. The retention behavior of proteins and the effect of pH on the retention in the range from 4.0 to 9.0 were investigated on both the naked and metal ion chelated columns. Four proteins were quickly separated in 2.0 min with linear gradient elution at a flow rate of 3.0 mL·min^?1 by using the synthesized Ni²⁺‐CM‐Asp‐P_GMA/EDMA packings. The separation time was shorter than other immobilized metal affinity chromatography reported in the literature. The Ni²⁺‐CM‐Asp‐P_GMA/EDMA column was further investigated for the rapid separation and purification of copper‐zinc superoxide dismutase (Cu,Zn‐SOD) from the blood of pig in 3.0 min with only one step. The results obtained were satisfactory.     

Preparation of High‐capacity,Monodisperse Polymeric Weak Cation Exchange Packings Using Surface‐initiated Atom Transfer Radical Polymerization and Its Chromatographic Properties

A novel stationary phase for weak cation exchange (WCX) chromatography was prepared by "grafting from" strategy. Surface initiated atom transfer radical polymerization (ATRP) of acrylic acid (AA) was conducted in toluene medium, starting from the macromolecule initiators of poly(4‐vinylbenzyl chloride‐co‐divinylbenzene) (P_CMS/DVB) beads. The amounts of poly(acrylic acid) grafted chains with different ATRP formulations were calculated based on the elemental analyses. The poly(acrylic acid) grafted beads obtained with different ATRP formulations were tried as chromatographic packings in the separation of proteins by ion‐exchange chromatography. The effect of the poly(acrylic acid) grafted chain lengths on P_CMS/DVB beads for the separation of proteins was investigated in details. Simultaneously, characterization of the column was investigated as ion chromatographic stationary phase for the separation of inorganic cations. The results show that poly(acrylic acid) grafted columns had excellent performance for separation of proteins and inorganic cations. The highest of the dynamic capacity of the column was 35.55 mg/mL. The columns were provided with high column efficiency.     

Controlled synthesis of amphiphilic biodegradable polylactide‐grafted dextran copolymers

The whole controlled synthesis of novel amphiphilic polylactide (PLA)‐grafted dextran copolymers was achieved. The control of the architecture of such biodegradable and potentially biocompatible copolymers has required a three‐step synthesis based on the “grafting from” concept. The first step consisted of the partial silylation of the dextran hydroxyl groups. This protection step was followed by the ring‐opening polymerization of D ,L ‐lactide initiated from the remaining OH functions of the partially silylated polysaccharide. The third step involved the silylether group deprotection under very mild conditions. Based on previous studies, in which the control of the first step was achieved, this study is focused on the last two steps. Experimental conditions were investigated to ensure a controlled polymerization of D ,L ‐lactide, in terms of grafting efficiency, graft length, and transesterification limitation. After polymerization, the final step was studied in order to avoid degradation of both polysaccharide backbone and polyester grafts. The chemical stability of dextran backbone was checked throughout each step of the synthesis. PLA‐grafted dextrans and PLA‐grafted (silylated dextrans) were proved to adopt a core‐shell conformation in various solvents. Furthermore, preliminary experiments on the potential use of these amphiphilic grafted copolymers as liquid/liquid interface stabilizers were performed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2577–2588, 2004     

Patterned immobilization of biomolecules by using ion irradiation‐induced graft polymerization

A new method for biomolecular patterning based on ion irradiation‐induced graft polymerization was demonstrated in this study. Ion irradiation on a polymer surface resulted in the formation of active species, which was further used for surface‐initiated graft polymerization of acrylic acid. The results of the grafting study revealed that the surface graft polymerization using 20 vol % of acrylic acid on the poly(tetrafluoroethylene) (PTFE) film irradiated at the fluence of 1 × 10¹⁵ ions/cm² for 12 h was the optimum graft polymerization condition to achieve the maximum grafting degree. The results of the fluorescence microscopy also revealed that the optimum fluence to achieve the maximum fluorescence intensity was 1 × 10¹⁵ ions/cm². The grafting of acrylic acid on the PTFE surfaces was confirmed by a fluorescence labeling method. The grafted PTFE films were used for the immobilization of amine‐functionalized p‐DNA, followed by hybridization with fluorescently tagged c‐DNA. Biotin‐amine was also immobilized on the acrylic acid grafted PTFE surfaces. Successful biotin‐specific binding of streptavidin further confirmed the potential of this strategy for patterning of various biomolecules. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6124–6134, 2009