Electromembrane extraction of gonadotropin‐releasing hormone agonists from plasma and wastewater samples

In the present study, for the first time electromembrane extraction followed by high performance liquid chromatography coupled with ultraviolet detection was optimized and validated for quantification of four gonadotropin‐releasing hormone agonist anticancer peptides (alarelin, leuprolide, buserelin and triptorelin) in biological and aqueous samples. The parameters influencing electromigration were investigated and optimized. The membrane consists 95% of 1‐octanol and 5% di‐(2‐ethylhexyl)‐phosphate immobilized in the pores of a hollow fiber. A 20 V electrical field was applied to make the analytes migrate from sample solution with pH 7.0, through the supported liquid membrane into an acidic acceptor solution with pH 1.0 which was located inside the lumen of hollow fiber. Extraction recoveries in the range of 49 and 71% within 15 min extraction time were obtained in different biological matrices which resulted in preconcentration factors in the range of 82–118 and satisfactory repeatability (7.1 < RSD% < 19.8). The method offers good linearity (2.0–1000 ng/mL) with estimation of regression coefficient higher than 0.998. The procedure allows very low detection and quantitation limits of 0.2 and 0.6 ng/mL, respectively. Finally, it was applied to determination and quantification of peptides in human plasma and wastewater samples and satisfactory results were yielded.     

Determination of melamine in aquaculture feed samples based on molecularly imprinted solid‐phase extraction

This research highlights the application of highly efficient molecularly imprinted solid‐phase extraction for the preconcentration and analysis of melamine in aquaculture feed samples. Melamine‐imprinted polymers were synthesized employing methacrylic acid and ethylene glycol dimethacrylate as functional monomer and cross‐linker, respectively. The characteristics of obtained polymers were evaluated by scanning electron microscopy, Fourier transform infrared spectroscopy and binding experiments. The imprinted polymers showed an excellent adsorption ability for melamine and were applied as special solid‐phase extraction sorbents for the selective cleanup of melamine. An off‐line molecularly imprinted solid‐phase extraction procedure was developed for the separation and enrichment of melamine from aquaculture feed samples prior to high‐performance liquid chromatography analysis. Optimum molecularly imprinted solid‐phase extraction conditions led to recoveries of the target in spiked feed samples in the range 84.6–96.6% and the relative standard deviation less than 3.38% (n = 3). The aquaculture feed sample was determined, and there was no melamine found. The results showed that the molecularly imprinted solid‐phase extraction protocols permitted the sensitive, uncomplicated and inexpensive separation and pre‐treatment of melamine in aquaculture feed samples.     

Molecularly imprinted solid-phase extraction of cocaine metabolites from aqueous samples

Cocaine is a well-known drug of abuse which, when ingested nasally or by smoking, undergoes a number of biotransformation and degradation reactions. In the present work, a synthetic analogue of the cocaine metabolite benzoylecgonine was prepared and used as a template molecule in the preparation of a series of molecularly imprinted polymers (MIPs). Molecularly imprinted solid-phase extraction (MISPE) conditions were established under which benzoylecgonine in aqueous samples could be selectively extracted and quantified at clinically relevant concentrations (μg/ml). Under optimised MISPE conditions, recoveries of analyte were high (>70%) and excellent discrimination between imprinted and non-imprinted materials observed.     

Preparation of doxycycline‐imprinted magnetic microspheres by inverse‐emulsion suspension polymerization for magnetic dispersion extraction of tetracyclines from milk samples

A magnetic dispersion extraction method was developed based on a molecularly imprinted magnetic microsphere (MIMM) for the selective clean‐up and enrichment of tetracycline antibiotics from milk samples. The MIMMs were prepared by inverse‐emulsion suspension polymerization, using doxycycline, trimethylolpropane trimethacrylate, acrylamide, methacrylic acid, and surface‐modified Fe₃O₄ as a template molecule, crosslinker, functional monomer, and magnetic component, respectively. Synthesis and extraction conditions were optimized for obtaining excellent affinity and high selectivity. The magnetism, covering amount, and selectivity of the magnetic microspheres were characterized by a vibrating sample magnetometer, thermogravimetric analysis, and a competitive recognition experiment. The MIMMs were applied to separate tetracycline antibiotics from milk samples by magnetic dispersion extraction, and an enrichment factor of 9.28 and a good sample clean‐up were obtained. The average recoveries of four tetracycline antibiotics were obtained in the range of 74.5–93.8% with a precision of 1.2–5.2%. The LODs and LOQs of the proposed method were in the range of 7.4–19.4 and 24.7–64.7 μg/kg, respectively. The results indicated that magnetic dispersion extraction using MIMMs is a powerful tool for food‐sample pretreatment with high selectivity and a simplified procedure.     

Preparation and characterisation of core-shell CNTs@MIPs nanocomposites and selective removal of estrone from water samples

This paper reports the preparation of carbon nanotubes (CNTs) functionalized with molecularly imprinted polymers (MIPs) for advanced removal of estrone. CNTs@Est-MIPs nanocomposites with a well-defined core-shell structure were obtained using a semi-covalent imprinting strategy, which employed a thermally reversible covalent bond at the surface of silica-coated CNTs for a large-scale production. The morphology and structure of the products were characterised by transmission electron microscopy and Fourier transform infrared spectroscopy. The adsorption properties were demonstrated by equilibrium rebinding experiments and Scatchard analysis. The results demonstrate that the imprinted nanocomposites possess favourable selectivity, high capacity and fast kinetics for template molecule uptake, yielding an adsorption capacity of 113.5 μmol/g. The synthetic process is quite simple, and the different batches of synthesized CNTs@Est-MIPs nanocomposites showed good reproducibility in template binding. The feasibility of removing estrogenic compounds from environmental water using the CNTs@Est-MIPs nanocomposites was demonstrated using water samples spiked with estrone.     

Determination of trace bisphenol A in complex samples using selective molecularly imprinted solid-phase extraction coupled with capillary electrophoresis

The highly selective, fast and effective sample pretreatment technique molecularly imprinted solid-phase extraction (MISPE) can overcome the low sensitivity of the highly efficient capillary electrophoresis-UV method (CE-UV). In this work, narrowly dispersible bisphenol A (BPA)-imprinted polymeric microspheres with a high capacity factor of k′ = 6.8 and an imprinted factor of I = 6.53 were investigated as selective solid-phase extraction (SPE) sorbents for use in extraction of BPA from different sample matrices (tap water, wastewater, Yangtze River water, soil from the Yangtze River, shrimp and human urine). Washing and eluting protocols of MISPE were optimized. Under optimal conditions, recoveries of MISPE were investigated. Recoveries were basically constant and the relative standard deviation (RSD) was lower than 5.8% when loading volumes changed from 1 to 50 mL. Recoveries ranged from 71.20% to 86.23% for different sample matrices. Compared with C18 SPE, MISPE had higher selectivity and recovery for BPA. BPA was determined with good accuracy and precision in different complex samples using CE-UV coupled with MISPE. Spiked recoveries ranged from 95.20% to 105.40%, and the RSD was less than 7.2%. Because a large loading volume was achieved, the enrichment efficiency of pretreatment and the sensitivity of this method were improved. The limits of detection of this MISPE-CE-UV method for BPA in tap water, wastewater, Yangtze River water, soil from the Yangtze River, shrimp and human urine were 3.0 μg L^− 1, 5.4 μg L^− 1, 6.9 μg L^− 1, 2.1 μg L^− 1, 1.8 μg L^− 1 and 84 μg L^− 1, respectively.     

Molecularly imprinted polymers for the solid‐phase extraction of four fluoroquilones from milk and lake water samples

A method based on molecular crowding and ionic liquids as reaction solvents has been used for the synthesis of molecularly imprinted polymers. Levofloxacin was selected as the template, polymethyl methacrylate was the molecular crowding agent, and 1‐butyl‐3‐methylimidazolium tetrafluoroborate (ionic liquid) was selected as the reaction solvent and porogen. The optimized proportion for the mixed porogen was dimethyl sulfoxide/ionic liquid/polymethyl methacrylate 1:1.6:5 in chloroform (150 mg mL^?1). The morphology and chemical composition of levofloxacin imprinted polymers were assessed by scanning electron microscopy and Fourier transform infrared spectroscopy. The absorption experiments demonstrated that the levofloxacin imprinted polymers possess high selective recognition property to levofloxacin and analogs, including enrofloxacin, ciprofloxacin and gatifloxacin, which all belong to fluoroquinolones. An extraction method using levofloxacin imprinted polymers as sorbent followed by high‐performance liquid chromatography analysis was optimized for the determination of four fluoroquinolones in milk and lake water samples. Under the optimized conditions, good linearity was observed in a range of 5–1000 ng g^?1 with the limit of detection between 0.3 and 0.5 ng g^?1 for the four fluoroquinolones. The recoveries at three spiked levels ranged 82.4–98.3% with the relative standard deviation ≤4.9.     

Development of a selective sorbent for the solid‐phase extraction of terbuthylazine in olive oil samples: A molecular imprinting strategy

Aiming to implement an analytical methodology that is highly selective for the extraction and quantification of terbuthylazine from olive oil, we successfully achieved: (i) the development of a molecularly imprinted polymer by bulk polymerization using terbuthylazine as template molecule, methacrylic acid as functional monomer, ethylene glycol dimethacrylate as cross‐linker, and dichloromethane as porogen; (ii) characterization of the imprinting material using Fourier transform infrared spectroscopy, thermogravimetric analysis, nitrogen adsorption at 77 K, and scanning electron microscopy; (iii) their molecular recognition for the template molecule using high‐performance liquid chromatography, and (iv) optimization of a solid‐phase extraction procedure using as sorbent the synthesized molecularly imprinted polymer for the selective extraction and clean‐up of terbuthylazine from spiked organic olive oil and further quantification of the pesticide levels by high‐performance liquid chromatography. The suitability of the implemented analytical methodology was demonstrated, as concentrations of terbuthylazine below the tolerated maximum residue limits in the spiked organic olive oil samples could be satisfactorily analyzed with good precision/accuracy with high recovery rates (96%). Overall, the implemented methodology has proven to be reliable and robust and is highly promising in the field of sample preparation, particularly for the isolation/preconcentration of terbuthylazine in complex food samples.     

Electromembrane extraction of peptides--fundamental studies on the supported liquid membrane

A large screening of different components in the supported liquid membrane (SLM) in electromembrane extraction (EME) was performed to test the extraction efficiency on eight model peptides. Electromembrane extraction from a 500 μL acidified aqueous sample containing the model peptides in the concentration 10 μg/mL was used. Extraction time was 5 min with an electric potential of 10 V and 900 rpm agitation of the sample vial. The samples were extracted through a hollow fiber-based SLM with different compositions of organic solvents and carriers. A small volume of acidified acceptor solution (25 μL) was after extraction analyzed directly, or with some dilution, on CE or HPLC. This article has identified mono- or di-substituted phosphate groups as the prominent group of carrier molecules needed to obtain acceptable recoveries. For the organic solvents, primary alcohols and ketones have shown promise regarding recovery and reproducibility, with some differences in selectivity. A new composition of the SLM, namely 2-octanone and tridecyl phosphate (90:10 w/w) has proved to give higher extraction recoveries and lower standard deviation than SLMs previously reported in the literature.     

Electromembrane extraction and capillary electrophoresis with capacitively coupled contactless conductivity detection: Multi‐extraction capabilities to analyses trace metals from saline samples

Simultaneous electromembrane extraction (EME) of six trace metal cations (Cu²⁺, Zn²⁺, Co²⁺, Ni²⁺, Pb²⁺, Cd²⁺) from saline samples was investigated. CE with capacitively coupled contactless conductivity detection (C⁴D) was used to determine the metals in acceptor solutions due to its excellent compatibility with the minute volumes of acceptor solutions. Bis(2‐ethylhexyl)phosphate (DEHPA) was selected as a suitable nonselective modifier for EME transport of target metal cations. Both, the individual effect of each major inorganic cation (Na⁺, K⁺, Ca²⁺, Mg²⁺) and their synergistic effect on EME of the trace metal cations were evaluated. In both cases, a decrease in extraction efficiency was observed when major inorganic cations were present in the sample. This effect was more significant for Ca²⁺ and Mg²⁺. The system was optimized for simultaneous extractions of the six target metals from saline samples (50 mM Na⁺, 5 mM Mg²⁺, 1 mM K⁺, and 1 mM Ca²⁺) and following EME conditions were applied. Organic phase consisted of 1‐nonanol containing 1% (v/v) DEHPA, acceptor solution was 1 M acetic acid (HAc) and sample pH was adjusted to 5. Sample was stirred at 750 rpm and EMEs were carried out at extraction potential of 10 V for 20 min. The method presented a repeatability between 8 and 21.8% (n = 5), good linearity in 0.5–10 μM concentration range (R² = 0.987‐0.999) and LOD better than 2.6 nM. Applicability of the EME–CE–C⁴D method to the analyses of metal cations in drinking water, seawater, and urine samples was also demonstrated.     

Preparation of novel curcumin‐imprinted polymers based on magnetic multi‐walled carbon nanotubes for the rapid extraction of curcumin from ginger powder and kiwi fruit root

A novel molecularly imprinted polymer based on magnetic phenyl‐modified multi‐walled carbon nanotubes was synthesized using curcumin as the template molecule, methacrylic acid as the functional monomer and ethylene glycol dimethacrylate as the cross‐linker. The phenyl groups contained in the magnetic imprinted polymers acted as the assisting functional monomer. The magnetic imprinted polymers were characterized by scanning electron microscopy, Fourier‐transform infrared spectroscopy and vibrating sample magnetometry. Adsorption studies demonstrated that the magnetic imprinted polymers possessed excellent selectivity toward curcumin with a maximum capacity of 16.80 mg/g. Combining magnetic extraction and high‐performance liquid chromatography technology, the magnetic imprinted polymer based on magnetic phenyl‐modified multi‐walled carbon nanotubes was applied for the rapid separation and enrichment of curcumin from ginger powder and kiwi fruit root successfully.     

Development and application of molecularly imprinted polymers as solid-phase sorbents for erythromycin extraction

Six molecularly imprinted polymers (MIPs) of erythromycin (ERY) were prepared by noncovalent bulk polymerization using methacrylic acid (MAA) as the functional monomer. On the basis of binding analysis, the MIPs with 1:2 optimum ratio of template to MAA were selected for subsequent scanning electron microscopy and Brunauer–Emmett–Teller analyses, which indicated that the MIPs had more convergent porous structures than the nonimprinted polymers. The equilibrium binding experiments showed that the binding sites of MIPs were heterogeneous, with two dissociation constants of 0.005 and 0.63 mg mL⁻¹, respectively. Furthermore, the performance of the MIPs as solid-phase extraction (SPE) sorbents was evaluated, and the selectivity analysis showed that the MIPs could recognize ERY with moderate cross-reactivity for other macrolides. The overall investigation of molecularly imprinted SPE for cleanup and enrichment of the ERY in pig muscle and tap water confirmed the feasibility of utilizing the MIPs obtained as specific SPE sorbents for ERY extraction in real samples. Figure Schematic diagram of the preparation and application of the erythromycin imprinted molecularly imprinted polymers Suquan Song and Aibo Wu contributed equally to this work.     

Preconcentration of indapamide from human urine using molecularly imprinted solid‐phase extraction

A simple, sensitive, and selective molecularly imprinted solid‐phase extraction and spectrophotometric method has been developed for the clean‐up and preconcentration of indapamide from human urine. Molecularly imprinted polymers were prepared by a non‐covalent imprinting approach using indapamide as a template molecule, 2‐(trifluoromethyl) acrylic acid as a functional monomer, ethylene glycol dimethacrylate as a crosslinker, N,N‐azobisisobutyronitrile as a thermal initiator and acetonitrile as a porogenic solvent. A non‐imprinted polymer was also prepared in the same way, but in the absence of template. Molecularly imprinted polymer and non‐imprinted polymer sorbents were dry‐packed into solid‐phase extraction cartridges. Eluates from cartridges were analyzed using a spectrophotometer for the determination of indapamide by referring to the calibration curve in the range 0.14–1.50 μg/mL. Preconcentration factor, limit of detection, and limit of quantification were 16.30, 0.025 μg/mL, and 0.075 μg/mL, respectively. A relatively high imprinting factor (9.3) was also achieved and recovery values for the indapamide spiked into human urine were in the range of 80.1–81.2%. In addition, relatively low within‐day (0.17–0.42%) and between‐day (1.1–1.4%) precision values were obtained as well. The proposed molecularly imprinted solid‐phase extraction and spectrophotometric method was successfully applied to selective extraction, preconcentration, and determination of indapamide from human urine samples.     

Determination of donepezil in serum samples using molecularly imprinted polymer nanoparticles followed by high‐performance liquid chromatography with ultraviolet detection

A molecularly imprinted polymer designed for the selective extraction of donepezil from serum samples was synthesized using a noncovalent molecular imprinting approach. The molecularly imprinted polymer was evaluated chromatographically and then its affinity for donepezil was confirmed by solid‐phase extraction. The optimal conditions for solid‐phase extraction were provided by cartridge conditioning using acidified water purified from a Milli‐Q system, sample loading under basic aqueous conditions, clean‐up using acetonitrile, and elution with methanol/tetrahydrofuran. Desirable molecular recognition properties of the molecularly imprinted polymer led to good donepezil recoveries (90–102%). The data indicated that the imprinted polymer has a perfect selectivity and affinity for donepezil and could be used for selective extraction and analysis of donepezil in human serum.     

Magnetic molecularly imprinted composite for the selective solid‐phase extraction of p‐aminosalicylic acid followed by high‐performance liquid chromatography with ultraviolet detection

A new method for the selective extraction of p‐aminosalicylic acid from aqueous and urine samples has been developed using magnetic molecularly imprinted polymer nanoparticles before determination by high‐performance liquid chromatography. The Fe₃O₄ nanoparticles were first prepared through the chemical coprecipitation of Fe²⁺ and Fe³⁺ and then coated with a vinyl shell. Subsequently, a layer of molecularly imprinted polymers was grafted onto the vinyl‐modified magnetic nanoparticles by precipitation polymerization. FTIR spectroscopy, scanning electron microscopy, vibrating sample magnetometry, and thermogravimetric analysis were applied to characterize the sorbent properties. Moreover, the predominant parameters affecting the magnetic solid phase extraction such as sample pH, sorption and elution times, the amount of sorbent, and composition and volume of eluent were investigated thoroughly. The maximum sorption capacity of the imprinted polymer toward p‐aminosalicylic acid was 70.9 mg/g, which is 4.5 times higher than that of the magnetic nonimprinted polymer. The magnetic molecularly imprinted polymer nanoparticles were applied for the selective extraction of p‐aminosalicylic acid from aqueous and urine samples and satisfactory results were achieved. The results illustrate that magnetic molecularly imprinted polymer nanoparticles have a great potential in the extraction of p‐aminosalicylic acid from environmental and biological matrices.     

Development of carbon‐nanotube‐assisted electromembrane extraction in the two‐phase mode combined with GC for the determination of basic drugs

In this work, carbon‐nanotube‐assisted electromembrane extraction in the two‐phase mode combined with GC was developed for the preconcentration and determination of basic drugs in body fluids. The multiwalled carbon nanotubes dispersed in organic solvent are held in the pores of the porous fiber wall by capillary forces and sonification. The membrane with immobilized carbon nanotubes acts as a sorbent and provides an additional pathway for analyte transport. This study demonstrates that the immobilization of carbon nanotubes in the supported liquid membrane is an excellent approach to enhance the performance of the extraction. Optimization of the variables affecting this method was carried out in order to achieve the best extraction efficiency. Optimal extractions were accomplished with octanol as the extraction solvent, 50 V as the driving force and pH 7.4 in the sample solution with the whole assembly agitated at 1000 rpm for 20 min. Under the optimized extraction conditions, the proposed technique provided good linearity (R² > 0.9990), repeatability (3.5–3.8%), low LODs (1.5 ng/mL), good preconcentration factors (292–316) and high recoveries (80–87%). Finally, this method was successfully used for the determination of tramadol and methadone in different body fluids including plasma and urine samples.     

High‐Selective Tramadol Sensor Based on Modified Molecularly Imprinted Polymer?Carbon Paste Electrode with Multiwalled Carbon Nanotubes

We report here a novel carbon paste electrode (CPE) which is able to quantitatively sense tramadol under physiological conditions without sample preparation step. The selectivity of CPE is modified by applying molecularly imprinted polymer (MIP) technology. Multiwalled carbon nanotubes (MWCNTs) are incorporated in the structure of CPE to improve the conductivity and the ion‐to‐electron transduction. The electrode shows a wide dynamic linear range for tramadol from 10^?7 to 10^?3 M. The observed limit of detection and % RSD are 5×10^?7 M and 1.8 %, respectively. Finally, the proposed method is applied to determine tramadol in urine and medicinal tablets.     

Selective extraction of triazine herbicides from food samples based on a combination of a liquid membrane and molecularly imprinted polymers

A selective extraction technique based on the combination of liquid membrane (microporous membrane liquid–liquid extraction) and molecularly imprinted polymers (MIP) was applied to triazines herbicides in food samples. Simazine, atrazine and propazine were extracted from aqueous food samples through the hydrophobic porous membrane that was impregnated with toluene, which also formed part of the acceptor phase. In the acceptor phase, the compounds were re-extracted onto MIP particles. The extraction technique was optimised for the amount of molecularly imprinted polymers particles in the organic acceptor phase, extraction time, and type of organic acceptor solvent and desorption solvent. An extraction time of 90 min and 50 mg of MIP were found to be optimum parameters. Toluene as the acceptor phase was found to give higher triazines binding onto MIP particles compared to hexane and combinations of diethyl ether and hexane. 90% methanol in water was found to be the best desorption solvent compared to acetonitrile, methanol and water. The selectivity of the technique was demonstrated by extracting spiked lettuce and apple extracts where clean chromatograms were obtained compared to liquid membrane extraction alone or to the microporous membrane liquid–liquid extraction – non-imprinted polymer combination. The MIP showed a certain degree of group specificity and the extraction efficiency in lettuce extract was 79% (0.72) for simazine, 98% (1.55) for atrazine and 86% (3.08) for propazine.     

Molecularly imprinted microspheres for the anticancer drug aminoglutethimide: Synthesis,characterization, and solid‐phase extraction applications in human urine samples

Molecularly imprinted microspheres (MIMs) for the anticancer drug aminoglutethimide (AG) were synthesized by aqueous suspension polymerization. The expected size and diameter of MIMs are controlled easily by changing one of the surfactant types, ratio of organic‐to‐water phase or stirring rate during polymerization. The obtained MIMs exhibit specific affinity toward AG with imprinting factor of 3.11 evaluated with a chromatographic model. The resultant MIMs were used as the SPE materials for the extraction of AG from human urine. A molecularly imprinted SPE (MISPE) method coupled with HPLC has been developed for the extraction and detection of AG in urine. Our results showed that most impurities from urine can be removed effectively after a washing step and the AG has been enriched effectively after MISPE operation with the recovery of >90% (n = 3). The developed MISPE–HPLC method could be used for enrichment and detection of AG in human urine.     

Molecularly imprinted solid‐phase extraction coupled with ultra high performance liquid chromatography and fluorescence detection for the determination of estrogens and their metabolites in wastewater

Estrogens are an important class of endocrine‐disrupting compounds, and their contamination of environmental waters through the effluents of wastewater treatment plants could have an important impact on aquatic biota, even at low concentrations. For this reason, the development of selective and sensitive extraction methodologies, which permit the identification and quantification of these compounds at trace level concentrations, is very important. In this study, a quantitative method based on molecularly imprinted solid phase extraction coupled to ultra high performance liquid chromatography with fluorescence detection has been developed. It has been used for the simultaneous determination of three estrogens and two of their metabolites in water samples from wastewater treatment plants. The method developed presents satisfactory limits of detection (between 0.18 and 0.45 ng·mL^?1), good recoveries (higher than 60%) and low relative standard deviations (under 10%). The method was used to analyze wastewater from a veterinary hospital as well as influent and effluent samples of a wastewater treatment plant of Gran Canaria (Spain) The concentrations of the detected hormones ranged from 1.35 to 2.57 ng·mL^?1.