Lignin peroxidase production by Streptomyces viridosporus T7A

Lignin peroxidase (LiP) production cost should be reduced to justify its use in the control of environmental pollution. In this work, we studied the enzyme production by Streptomyces viridosporus T7A using glucose or corn oil as a carbon source having 0.65% yeast extract as a nitrogen source. Enzyme activity, observed using either 0.65% glucose or corn oil at 0.1, 0.5, and 1.0% concentration, was 300, 150, 300, and 200 U/L, respectively. Although higher enzyme activity was obtained in both media containing 0.65% glucose and 0.5% corn oil, the use of corn oil resulted in a better LiP stability. When combined carbon sources were used, higher values of enzyme activity (360, 350, and 225 U/L) were observed in media with 0.65% glucose and supplemented with 0.1, 0.5, and 1.0% corn oil, respectively. Although the presence of both glucose and 0.5% corn oil is favorable for LiP production, satisfactory results in terms of enzyme production and stability could be also observed using 0.5% corn oil as a sole carbon source, which may lead to reduced production costs of the LiP enzyme.     

Physiological aspects of the regulation of extracellular enzymes ofphanerochaete chrysosporiwn

The formation and decay of lignolytic enzymes, along with the generation of other extracellular metabolites in submerged cultures ofPhanerochaete chrysosporium, were studied under different physiological conditions. Whereas lignin peroxidase (LiP) was detectable only in a narrow range of O₂ tension and nitrogen concentration, manganese peroxidase (MnP) reached considerable levels over a broad range. The decay of LiP and MnP activities under lignolytic conditions paralleled that of heme and total proteins. The conditions that decrease or suppress LiP or MnP activities resulted in high levels of extracellular protease activity and/or polysaccharides.     

Lignin peroxidase and protease production by Streptomyces viridosporus T7A in the presence of calcium carbonate

Streptomyces are good producers of enzymes of industrial interest, such as lignin peroxidase (LiP) and proteases. To optimize production of these enzymes by Streptomyces viridosporus T7A, two parameters were evaluated: carbon sources and calcium carbonate. Shake-flask fermentations were performed using culture media, with and without CaCO₃, contained yeast extract, mineral salts and either glucose, lactose, galactose, or corn oil. In the absence of calcium carbonate, the maximum values for LiP and protease activities occurred during the idiophase with LiP activity being favored by glucose, corn oil, and galactose, and protease activity being favored only by corn oil. Calcium carbonate affected the cell morphology by reducing the size of the pellets. Moreover, in the presence of the salt, LiP production was growth-associated in all media but the glucose medium. Higher enzyme levels were observed when galactose and glucose were used as carbon sources. Protease activity was repressed by both glucose and galactose, whereas corn oil was the best carbon source for the enzyme production. Calcium carbonate increased LiP production by up to 2.6-fold. Such improvement was not observed for protease production, suggesting a selective effect of CaCO₃ on LiP activity.     

Use of steam explosion liquor from sugar cane bagasse for lignin peroxidase production by Phanerochaete chrysosporium

The possibility of using two by-products of the sugar cane industry, molasses and bagasse steam explosion liquor (SEL), for lignin peroxidase (LiP) production by Phanerochaete chrysosporium was investigated. For comparison, the fungus was initially cultivated in synthetic media containing either glucose, sucrose, xylose, or xylan as sole carbon sources. The effect of veratryl alcohol (VA) was also investigated in relation to the enzyme activity levels. Results showed that sucrose was not metabolized by this fungus, which precluded the use of molasses as a carbon source. Glucose, xylose, and xylan promoted equivalent cell growth. Enzyme levels in the absence of VA were lower than 28 UI/L and in the presence of VA reached 109 IU/L with glucose and 85 IU/L with xylose or xylan. SEL was adequate for P. chrysosporium LiP production as LiP activity reached 90 IU/L. When VA was added to this medium, enzyme concentration increased to 155 IU/L.     

Octyl glucoside inhibits [14C]DHP mineralization whereas peroxidase activity is stimulated inPhanerochaete Chrysosporium

Octyl glucoside stimulated peroxidase formation inPhanerochaete chrysosporium ME-446 cultivated in cellulose-based media. Addition of 0.1% of the nonionic surfactant resulted in a ninefold (143 U/L) and sixfold (119 U/L) increase in LiP formation under conditions of N limitation and N excess, respectively. Octyl glucoside also stimulated MnP formation, but to a lesser extent than observed with LiP. The cellobiose-oxidizing enzymes (cellobiose dehydrogenase and cellobiose:quinone oxidoreductase) were stimulated by octyl glucoside when used at a concentration of up to 0.05%, but higher concentrations gave values similar to those for the controls. Little proteolytic activity was detected in the presence of the surfactant. In general, activities of the enzymes studied were of the same order as those seen using Tween-80. In contrast with Tween-80, octyl glucoside markedly inhibited [¹⁴C]DHP mineralization. Attempts to account for the observed inhibition of synthetic lignin degradation by P.chrysosporium in the presence of octyl glucoside are discussed.     

微乳液中木质素酶的研究

在微 乳液中 Ｌｉ Ｐ 和 Ｍｎ Ｐ 酶活性 比在酒 石酸 钠 缓冲 液中 分 别提 高了 ８２１５ ％ 和５７９ ０ ％ ,并且 木质素酶 解失重率 比在酒 石酸钠缓 冲液中 提高了６６８６ ％ ． 紫 外光谱和 色谱质谱联用 分析木质素酶 解产物有 黎芦醇 类物质、低 分子酚 类物质、阿 魏酸、紫丁 香酸、香草 酸等 低分 子酸 类物 质,以及一些 中性物 质如醌类 、烷烃类 等等． 从酶解产 物可看 出,木质素 酶能催 化单电子 氧化并 引起一系列自由 基反应, 这些作用 可以用来 解释木 质素降 解过 程的 化学 反应 机制。木 质素 酶对 木质 素 的酶解作用 不能完 全反映木 质素的微 生物降 解过程     

Ceriporiopsis subvermispora used in delignification of sugarcane bagasse prior to soda/anthraquinone pulping

Sugarcane bagasse was pretreated with the white-rot fungus Ceriporiopsis subvermispora for 30 d of incubation. The solid-state fermentation of 800 g of bagasse was carried out in 20-L bioreactors with an inoculum charge of 250 mg of fungal mycelium/kg of bagasse. The oxidative enzymes manganese peroxidase (MnP), lignin peroxidase (LiP), and lac-case (Lac) and the hydrolytic enzyme xylanase (Xyl) were measured by standard methods and related to the fungus’s potential for delignification. Among the lignocellulolytic assayed enzymes, Xyl was detected in larger quantity (4478 IU/kg), followed by MnP (236 IU/kg). LiP and Lac were not detected. The results of chemical analysis and mass component loss showed that C. subvermispora was selective to lignin degradation. Pretreated sugarcane bagasse and control pulps were obtained by soda/anthraquinone (AQ) pulping. Pulp yields, kappa number, and viscosity of all pulps were determined by chemical analysis of the samples. Yields of soda/AQ ranged from 46 to 54%, kappa numbers were 15–25, and the viscosity ranged from 3.6 to 7 cP for pulps obtained from pretreated sugarcane bagasse.     

Catalytic performance of lignin peroxidase in a novel reverse micelle

To enhance the catalytic activity of lignin peroxidase (LiP) in a reverse micelle, a synthesized two-tail nonionic surfactant N-gluconyl glutamic acid didecyl ester (GGDE) was used to formulate a novel reverse micelle. Based on the LiP catalyzed oxidation of veratryl alcohol (VA) in this novel GGDE/TritonX-100-cyclohexane-H(2)O reverse micelle, the effects of the size of the reverse micelle, the buffer pH, and the concentration of H(2)O(2) on the catalytic activity of LiP were investigated. Under the optimized conditions, the catalytic efficiency of LiP in the GGDE/TritonX-100 reverse micelle was 40 times higher than that in the AOT reverse micelle. The full expression of catalytic activity of LiP in this medium was mainly due to the lack of electrostatic interaction between LiP and the head group of GGDE and TritonX-100 and to the size fit between LiP and the inner water cavity of the reverse micelle.     

Mn2+ alters peroxidase profiles and lignin degradation by the white-rot fungus Pleurotus ostreatus under different nutritional and growth conditions

The white-rot fungus Pleurotus ostreatus produces two types of extracellular peroxidases: manganese-dependent peroxidase (MnP) and versatile peroxidase (VP). The effect of Mn²⁺ on fungal growth, peroxidase activity profiles, and lignin degradation by P. ostreatus was studied in liquid culture and under solid-state fermentation conditions on perlite, the latter resembling the natural growth conditions of this fungus. The fungus was grown in either a defined asparagine-containing basidiomycete selective medium (BSM) or in a rich peptone medium (PM). Biomass production, as determined by respiration experiments in solid-state fermentation and liquid cultures and fungal growth on Petri dishes, was higher in the PM than in the BSM. Mn²⁺ affected biomass production only in the PM on Petri dishes. In the nonamended PM, high levels of MnP and VP activity were detected relative to the nonamended BSM. Nevertheless, a higher rate of ¹⁴C-lignin mineralization was measured in the Mn²⁺-amended BSM, as determined during the course of 47 d of fermentation. Mn²⁺ amendment of the PM increased mineralization rate to that obtained in the Mn²⁺-amended BSM. The enzyme activity profiles of MnP and VP were studied in the BSM using anion-exchange chromatography. In the nonamended BSM, only minute levels of MnP and VP were detected. On Mn²⁺ amendment, two MnP isoenzymes (B1 and B2) appeared. Isoenzyme B2 was purified and showed 100% identity with the MnP isoenzyme purified in our previous study from PM-solid-state fermentation (P6). P6 was found to be the dominant isoenzyme in terms of activity level and gene expression compared with the VP isoenzymes. Based on these results, we concluded that Mn²⁺ plays a key role in lignin degradation under different nutritional and growth conditions, since it is required for the production of MnP in P. ostreatus.     

Influence of media nutrients on synthesis of lignin peroxidase from Aspergillus sp

The effect of carbon and nitrogen sources, lignocellulosic substrates, and metal ions on lignin peroxidase (LiP) activity of Aspergillus sp., which was isolated from a mangrove area, was studied. Glucose (1%) was found to be the best carbon source. Among the various lignocellulosic substrates used, coir pith at 3% concentration increased LiP activity twofold on the second day of incubation. Peptone and KNO₃ completely inhibited the enzyme synthesis while (NH₄)₂SO₄ at 12.5 mM produced maximum activity. Since seawater contained all the requisite metal ions, any added ions had a negative effect on activity. Cu²⁺ had the most inhibiting effect while K⁺ the least. When all the optimized conditions were provided, in nitrogen- and carbon-sufficient medium, a maximum LiP activity of 345 U/mL was obtained on the second day of incubation.     

Construction and characterization of a manganese-binding site in cytochrome c peroxidase: towards a novel manganese peroxidase

Background: Manganese-binding sites are found in several heme peroxidases, namely manganese peroxidase (MnP), chloroperoxidase, and the cationic isozyme of peanut peroxidase. The Mn-binding site in MnP is of particular interest. Oxidation of Mn(II) to Mn(III) is a key step in the biodegradation of lignin, a complex phenylpropanoid polymer, as well as of many aromatic pollutants. Cytochrome c peroxidase (CcP), which is structurally homologous to MnP despite a poor sequence homology, does not bind manganese. Thus, engineering a Mn-binding site into CcP will allow us to elucidate principles behind designing metal-binding sites in proteins, to understand the structure and function of this class of Mn-binding centers, and to prepare novel enzymes that can degrade both lignin and other xenobiotic compounds.Results: Based on a comparison of the crystal structures of CcP and MnP, a site-directed triple mutant (GIy41→ Glu, Val45 →- GIu, His181 → Asp) of residues near the putative Mn-binding site in CcP was prepared and purified to homogeneity. Titrating MnSO₄ into freshly prepared mutant CcP resulted in electronic absorption spectral changes similar to those observed in MnP. The calculated apparent dissociation constant and the stoichiometry of Mn-binding of CcP were also similar to MnP. Titration with MnSO₄ resulted in the disappearance of specific paramagnetically shifted nuclear magnetic resonance spectroscopy signals assigned to residues close to the putative Mn-binding site in the mutant CcP. None of the spectral features were observed in wild-type CcP. In addition, the triple mutant was capable of oxidizing Mn(II) at least five times more efficiently than the native CcP.Conclusions: A Mn-binding site has been created in CcP and based on our spectroscopic studies the designed Mn-binding site is similar to the Mn-binding site in MnP. The results provide a basis for understanding the structure and function of the Mn-binding site and its role in different heme peroxidases.     

Immobilization of manganese peroxidase fromLentinula edodes on azlactone-functional polymers and generation of Mn3+ by the enzyme-polymer complex

Manganese peroxidase (MnP) purified fromLentinula edodes was covalently immobilized on 3M’s azlactone-functional copolymer, 3M EmphazeTM AB1 Biosupport Medium. Tethered MnP is capable of generating Mn³⁺ from Mn²⁺ and H₂O₂. Mn₃₊, properly chelated, can be used as a nonspecific oxidant of organopollutants. A variety of conditions designed to maximize coupling efficiency while maintaining Mn³⁺ -generating catalytic activity were tested. Biochemical characteristics of the MnP enzyme, including amino acid composition, pH and temperature stability, and concentration of its Mn²⁺ substrate, influenced chemical conditions necessary for the coupling reaction. The physical parameters of immobilization reaction time, protein concentration, ionic conditions, pH, and temperature were examined. Results of these experiments indicated maximum coupling efficiency and enzyme activity were achieved by immobilizing at MnP concentrations < 2 mg/mL for at least 2 h using pH 7.0 buffer containing 1.0M sodium sulfate and 1.0 mM Mn²⁺. Increasing coupling reaction temperature also improved coupling efficiency. A synthesis of these optimized immobilizations yielded MnP coupling efficiencies of 40–50% with 35% of the coupled protein retaining enzymatic activity. Results of MnP immobilizations on nonporous azlactone-functional dispersion polymers more hydrophobic than Emphaze are also reported, and coupling efficiencies > 65% with 100% of the coupled enzyme active have been measured.     

Elicitation of lignin peroxidase inStreptomyces lividans

Using a novel starch-based medium (DJMM) which elicits high expression of lignin peroxidase (ALiP-P3) fromStreptomyces viridosporus T7A, significant levels of ALiP-P3 (between 1135 and 1784 nmol/g cell-min) were excreted byS. lividans TK23, TK24, and TK64 with the supernatants capable of degrading dichlorophenol (these strains were previously reported to produce low levels of LiP). TheS. lividans wildtype strains produced 1/9 to 1/6 the cell-specific LiP activity previously detected inS. viridosporus T7A cultures grown in the same starch-based medium; however, by using DJMM to increase the cell density, the volumetric activity of wild-typeS. lividans TK23, TK24, and TK64 strains was increased 11 to 20-fold compared to cultivations in a yeast-extract-based medium. Consequently, this increase of LiP production allows the direct analysis of LiP activity in the supernatants of these strains without the need for enzyme concentration through ultrafiltration. Immunoblot analysis verified that a single 56.5 kDa band, secreted by all three strains, was extremely similar in size and immunologic reactivity to the 59.5 kDa ALiP-P3 isoform of S.viridosporus T7A. In addition, Western blot analysis was used to show that a previously cloned 4.1 kb chromosomal fragment ofS. viridosporus T7A DNA did not contain the ALiP-P3 structural genes.     

小麦秸秆发酵产生的真菌Pleurotus ostreatus IBL-02锰过氧化物酶的溶胶-凝胶固定化及其催化污水脱色(英文)

Solid state bio-processing of wheat straw was carried out through an indigenous fungal strain Pleurotus ostreatus IBL-02 under pre-optimized fermentation conditions. The maximum activity, 692±12 U/mL, of the industrially important manganese peroxidase (MnP) enzyme was recorded after five days of still culture incubation. The crude MnP was 2.1-fold purified with a specific activity of 860 U/mg after purification on a Sephadex-G-100 gel column. On native and SDS-PAGE electrophoresis gels, the purified MnP fraction was a single homogenous band of 45 kDa. An active fraction of MnP was immobilized using hydrophobic sol-gel entrapment comprising tetramethoxysilane (T) and propyltrimethoxysilane (P) at different T:P molar ratios. Characterization revealed that after 24 h incubation at varying pH and temperatures, the MnP fraction immobilized at a T:P ratio of 1:2 in the sol-gel retained 82% and 75% of its original activity at pH4 and 70 ℃, respectively. The optimally active fraction at a 1:2 T:P ratio was tested against MnSO4 as a substrate to determine the kinetic catalytic constants KM and Vmax . To explore the industrial applicability of P. ostreatus IBL-02 MnP, both the free and immobilized MnP were used for the decolorization of four different textile industrial effluents. A maximum of 100% decolorization was achieved for the different textile effluents within the shortest time period. A lower KM , higher Vmax , hyper-activation, and enhanced acidic and thermal resistance up to 70 ℃ were the novel catalytic features of the sol-gel immobilized MnP, suggesting that it may be a potential candidate for biotechnological applications particularly for textile bioremediation purposes.     

Cotton Stalk Pretreatment Using <Emphasis Type="Italic">Daedalea flavida</Emphasis>, <Emphasis Type="Italic">Phlebia radiata</Emphasis>, and <Emphasis Type="Italic">Flavodon flavus</Emphasis>: Lignin Degradation,Cellulose Recovery,and Enzymatic Saccharification

Lignocellulolytic enzyme activities of selective fungi Daedalea flavida MTCC 145 (DF-2), Phlebia radiata MTCC 2791 (PR), and non-selective fungus Flavodon flavus MTCC 168 (FF) were studied for pretreatment of cotton stalks. Simultaneous productions of high LiP and laccase activities by DF-2 during early phase of growth were effective for lignin degradation 27.83 ± 1.25 % (w/w of lignin) in 20-day pretreatment. Production of high MnP activity without laccase in the early growth phase of PR was ineffective and delayed lignin degradation 24.93 ± 1.53 % in 25 days due to laccase production at later phase. With no LiP activity, low activities of MnP and laccase by FF yielded poor lignin degradation 15.09 ± 0.6 % in 20 days. Xylanase was predominant cellulolytic enzyme produced by DF-2, resulting hemicellulose as main carbon and energy source with 83 % of cellulose recovery after 40 days of pretreatment. The glucose yield improved more than two fold from 20-day DF-2 pretreated cotton stalks after enzymatic saccharification.     

Screening of laccase, manganese peroxidase, and versatile peroxidase activities of the genus Pleurotus in media with some raw plant materials as carbon sources

Species of the genus Pleurotus are among the most efficient natural species in lignin degradation belonging to the subclass of ligninolytic organisms that produce laccase (Lac), Mn-dependent peroxidase (MnP), versatile peroxidase (VP), and the H₂O₂-generating enzyme aryl-alcohol oxidase, but not lignin peroxidases. Production of Lac and oxidation of 2,6-dimethoxyphenol (DMP) in the presence and absence of Mn²⁺ were detected both in submerged fermentation (SF) of dry ground mandarine peels and in solid-state fermentation (SSF) of grapevine sawdust in all investigated Pleurotus species and strains. Evidence of cultivation methods having a distinct influence on the level of enzyme activities has been demonstrated. Most of the species and strains had higher Lac activity under SSF conditions than under SF conditions. DMP oxidation in the presence and absence of Mn²⁺ was detected in all investigated species and strains, but was lower under SF conditions than under SSF conditions for most of them. However, relative activities of DMP oxidation in the absence of Mn²⁺, as percentages of activity agasint DMP in the presence of Mn²⁺, were higher under conditions of SF than in SSF cultures in most of the investigated species and strains. The obtained results showed that strains of different origins have different efficiently ligninolytic systems and that conditions of SSF are more favorable for ligninolytic activity than those in SF owing to their similarity to natural conditions on wood substrates.     

Oxidation of crocein orange G by lignin peroxidase isoenzymes

The ligninolytic enzyme system ofPhanerochaete chrysosporiun is able to decolorize several recalcitrant dyes. Three lignin peroxidase isoenzymes, LiP 3.85, LiP 4.15, and LiP 4.65, were purified by preparative isoelectric focusing from the carbon-limited culture medium ofP. chrysosporium. Based on amino terminal sequences, the purified isoenzymes correspond to the isoenzymes H8, H6, and H2, respectively, from theN-limited culture. The purified isoenzymes were used for decolorization of an azo dye, Crocein Orange G (COG). According to the kinetic data obtained, the oxidation of COG by lignin peroxidase appeared to follow Michaelis-Menten kinetics. Kinetic parameters for each isoenzyme were determined. The inactivating effect of ascending H₂O₂ concentrations on COG oxidation is shown to be exponential within the used concentration range. The best degree of decolorization of 100 μM COG was obtained when the H₂O₂ concentration was 150 μM. This was also the lowest H₂O₂ concentration for maximal decolorization of 100 μM COG, regardless of the amount of lignin peroxidase used in the reaction.     

N-demethylation of methylene blue by lignin peroxidase from Phanerochaete chrysosporium

Applied Biochemistry and Biotechnology - Phanerochaete chrysosporium lignin peroxidase (LiP) can degrade synthetic dyes such as heterocyclic, azo, and triphenylmethane on its activation by H2O2....     

Blue luminescence induced by confinement in self-assembled films

The fabrication and characterization by means of photoluminescence (PL), UV-vis absorption, electro-luminescence (EL) and X-ray reflectivity of multilayer heterostructures consisting of alternate layers of conjugated and non-conjugated polymers have been studied. The heterostructures are prepared by the layer-by-layer self-assembly technique, using two types of polyelectrolytes. The first are precursors of conjugated polymers such as poly(phenylenevinylene) (PPV) and other poly(arylenevinylene) polymers, and the second are non-conjugated polymers such as poly(styrene-4-sulfonate) (SPS), polyacrylic acid (PAA) and poly(allylamine hydrochloride) (PAH). The heterostructures consist of a repeated sequence of bilayers (layer pair) or multilayers, where the conjugated polymer is formed by heat treatment under vacuum. The thickness of each bilayer or multilayer was controlled by changing the non-conjugated polymer layer. Most importantly, we have found that the PL and EL spectral emissions can be ‘tuned’ by a proper ‘design’ of the heterostructure. Particularly, heterostructures in which the bilayer thickness is rather small and the electroluminescent layers are practically in contact show a blue shift upon decreasing the thickness of the assembly for ultrathin assemblies. In contrast, for assemblies where the electroluminescent layers are well separated by one or several non-conjugated layers (polyelectrolyte spacers), the emission is in the blue and independent of the assembly thickness (number of bilayers). We interpret the results as being due to confinement effects. Using this assembly technique, we were able to fabricate light emitting diodes (LEDs) which emit in the blue region.     

Adsorption and catalytic properties of peroxidase

The adsorption of peroxidase was studied on ten silicate adsorbents, aluminosilicate, and alumina. It was shown that its value depended on both the parameters of the porous structure and the nature of the adsorbent. The maximum adsorption values were obtained on biporous silicate adsorbents and biporous aluminosilicate. It was established that the adsorbed peroxidase layers on these adsorbents had the best catalytic properties as well. It was shown that the specific activity of the enzyme depended on the degree of the surface filling.