NiWO3 Nanoparticles Grown on Graphitic Carbon Nitride (g‐C3N4) Supported Toray Carbon as an Efficient Bifunctional Electrocatalyst for Oxygen and Hydrogen Evolution Reactions

Catalysts for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) are at the heart of water oxidation reactions. Despite continuous efforts, the development of OER/HER electrocatalysts with high activity at low cost remains a big challenge. Herein, a composite material consisting of TC@WO₃@g‐C₃N₄@Ni‐NiO complex matrix as a bifunctional electrocatalyst for the OER and HER is described. Though the catalyst has modest activity for HER, it exhibits high OER activity thereby making it a better nonprecious electrocatalyst for both OER and HER and is further improved by g‐C₃N₄. The catalytic activity arises from the synergetic effects between WO₃, Ni‐NiO, and g‐C₃N₄. A Ni‐NiO alloy and WO₃ nanoparticles decorated on the g‐C₃N₄ surface supported toray carbon (TC) matrix (TC@WO₃@g‐C₃N₄@Ni‐NiO) by a facile route that show an excellent and durable bifunctional catalytic activity for OER and HER in the alkaline medium are developed. This carbon nitride with binary metal/metal‐oxide matrix supported with TC exhibit an overpotential of 0.385 and 0.535 V versus RHE at a current density of 10 mA cm^?2 (Tafel slopes of 0.057 and 0.246 V dec^?1 for OER and HER, respectively), in 0.1 m NaOH . The catalyst is tested in water electrolysis for 17 h.     

铜纳米阵列高效电解水产氧催化剂的制备

本文报道了一种利用简单的两步牺牲模板法,在泡沫铜基底表面完成了三维氧化铜纳米晶阵列的生长. 氧化铜纳米晶阵列具有良好的导电性,稳定性,在碱性溶液中有着优秀的电解水产氧催化性能. 氧化铜纳米晶阵列催化水的电化学氧化只需400 mV的过电势即可达到100 mA/cm²的电流密度,与其它铜基电解水产氧催化剂以及贵金属IrO₂相比都有着明显的优势. 氧化铜纳米晶阵列在270 mA/cm²左右的工作电流下连续工作10 h依然可以保持良好的稳定性,是相同的工作电压下IrO₂工作电流的10倍(约25 mA/cm²).     

A Self‐Assembly Route to an Iron Phthalocyanine/Reduced Graphene Oxide Hybrid Electrocatalyst Affording an Ultrafast Oxygen Reduction Reaction

Graphene oxide (GO) is an attractive freestanding support that can be decorated with ultrathin organic layers for facile and low‐cost fabrication of novel devices with controllable functional properties and microstructures. Here, it is reported that a hybrid material consisting of an ultrathin iron phthalocyanine (FePc) layer self‐assembled on reduced graphene oxide (rGO) exhibits excellent catalytic activity that is superior to that of commercial Pt/C for an oxygen reduction reaction (ORR). During solution processing, the FePc layer is first self‐organized onto GO sheets and then reduced electrochemically to form an FePc/rGO hybrid electrocatalyst. Kinetics studies reveal that the hybrid architecture affords an ultrafast ORR rate caused by a strongly dominant four‐electron process, and the durability of the catalyst shows significant improvement by forming the hybrid structure. Spectroscopic studies suggest that these advantages are afforded by synergistic effects between FePc and rGO, which are enriched by the hybrid structure and the appropriate reduction step.     

Co9S8 Nanoparticles Incorporated in Hierarchically Porous 3D Few‐Layer Graphene‐Like Carbon with S,N‐Doping as Superior Electrocatalyst for Oxygen Reduction Reaction

Electrochemical oxygen reduction reaction (ORR), using nonprecious metal catalysts, has attracted great attention due to the importance in renewable energy technologies, such as fuel cells and metal–air batteries. A simple and scalable synthetic route is demonstrated for the preparation of a novel 3D hybrid nanocatalyst consisting of Co₉S₈ nanoparticles which are incorporated in N,S‐doped carbon (N, S–C) with rational structure design. In particular, the hybrid catalyst is prepared by direct pyrolysis and calcination of a gel mixture of Mg,Co nitrate‐thiourea‐glycine under Ar atmosphere, with subsequent HCl washing. The properties of obtained hybrid catalyst are quite dependent on calcination temperature and added glycine amount. Under a molar ratio of Co5‐Mg15‐tu10‐gl45 and a calcination temperature of 900 °C, Co₉S₈ nanoparticles are embedded in a well‐developed carbon matrix which shows a porous 3D few‐layer graphene‐like N, S–C with open and hierarchical micro–meso–macro pore structure. Because of the synergistic effect between Co₉S₈ nanoparticles and well‐developed carbon support, the composite exhibits high ORR activity close to that of commercial Pt/C catalyst. More importantly, the composite displays superior long‐term stability and good tolerance against methanol. The strategy developed here provides a novel and efficient approach to prepare a cost‐effective and highly active ORR electrocatalyst.     

3D Array of Bi2S3 Nanorods Supported on Ni Foam as a Highly Efficient Integrated Oxygen Electrode for the Lithium‐Oxygen Battery

Bismuth sulfide nanorod array is directly grown on nickel foam (R‐Bi₂S₃/NF) to serve as a completely carbon and binder‐free 3D porous oxygen electrode material for lithium‐oxygen (Li‐O₂) batteries. The synergistic effect of the fast kinetics of electron transport and gas and electrolyte diffusion provided by the continuous free‐standing network structure and the excellent electrocatalytic activity of the bismuth sulfide nanorod array enables outstanding performance of the oxygen electrode. Li‐O₂ battery with the free‐standing R‐Bi₂S₃/NF oxygen electrode exhibits high energy efficiency (78.7%), good rate capability (4464 mA h g⁻¹ at 1500 mA g⁻¹), as well as excellent cyclability (146 cycles) while maintaining a moderate specific capacity of 1000 mA h g⁻¹. The effect of cathodes with different reactant (O₂) and intermediate (LiO₂) adsorbability on the product (Li₂O₂) growth model is studied by first‐principle calculations. The strong O₂ adsorption and weak LiO₂ adsorption on Bi₂S₃ drives the growth of large‐size Li₂O₂ particles via solution growth model. Remarkably, the large‐area pouch‐type Li‐O₂ battery delivers an energy density of 330 Wh kg⁻¹. The present results open up a promising avenue toward developing novel electrode architecture for high‐performance Li‐O₂ batteries through controlling morphology and functionality of porous electrodes.     

Yolk–Shell‐Structured Cu/Fe@γ‐Fe2O3 Nanoparticles Loaded Graphitic Porous Carbon for the Oxygen Reduction Reaction

Core–shell Cu/γ‐Fe₂O₃@C and yolk–shell‐structured Cu/Fe@γ‐Fe₂O₃@C particles are prepared by a facile synthesis method using copper oxide as template particles, resorcinol‐formaldehyde as the carbon precursor, and iron nitrate solution as the iron source via pyrolysis. With increasing carbonization temperature and time, solid γ‐Fe₂O₃ cores are formed and then transformed into Fe@γ‐Fe₂O₃ yolk–shell‐structured particles via Ostwald ripening under nitrogen gas flow. The composition variations are studied, and the formation mechanism is proposed for the generation of the hollow and yolk–shell‐structured metal and metal oxides. Moreover, highly graphitic carbons can be obtained by etching the metal and metal oxide nanoparticles through an acid treatment. The electrocatalytic activity for oxygen reduction reaction is investigated on Cu/γ‐Fe₂O₃@C, Cu/Fe@γ‐Fe₂O₃@C, and graphitic carbons, indicating comparable or even superior performance to other Fe‐based nanocatalysts.     

Co3O4@Co Nanoparticles Embedded Porous N‐Rich Carbon Matrix for Efficient Oxygen Reduction

Oxygen reduction reaction (ORR) is an important reaction in many energy conversion systems, but it is severely restricted by its slow kinetics. Developing efficient non‐noble‐metal catalysts for ORR has attracted extended interests, but still remains a great challenge. Herein, an efficient catalysts consisting of Co₃O₄@Co nanoparticles embedded in N‐rich mesoporous carbon matrix is developed by the carbonization of Co‐containing zeolitic imidazolate framework precursor. The derived matrix exhibits outstanding catalytic activity with onset potential of 0.97 V vs. RHE, half‐wave potential of 0.88 V vs. RHE, and good catalytic durability when tested with the rotation speed of 1600 rpm. Carbinization under NH₃ introduces extra elemental N, which subsequently enhances the limiting current densities. This study provides insight into the rational design of highly active ORR catalysts.     

Nitrogen‐Doped Carbon with Mesopore Confinement Efficiently Enhances the Tolerance,Sensitivity, and Stability of a Pt Catalyst for the Oxygen Reduction Reaction

Electrocatalysts for the oxygen reduction reaction (ORR) present some of the most challenging vulnerability issues reducing ORR performance and shortening their practical lifetime. Fuel crossover resistance, selective activity, and catalytic stability of ORR catalysts are still to be addressed. Here, a facile and in situ template‐free synthesis of Pt‐containing mesoporous nitrogen‐doped carbon composites (Pt‐m‐N‐C) is designed and specifically developed to overcome its drawback as an electrocatalyst for ORR, while its high activity is sustained. The as‐prepared Pt‐m‐N‐C catalyst exhibits high electrocatalytic activity, dominant four‐electron oxygen reduction pathway, superior stability, fuel crossover resistance, and selective activity to a commercial Pt/C catalyst in 0.1 m KOH aqueous solution. Such excellent performance benefits from in situ covalent incorporation of Pt nanoparticles with optimal size into N‐doped carbon support, dense active catalytic sites on surface, excellent electrical contacts between the catalytic sites and the electron‐conducting host, and a favorable mesoporous structure for the stabilization of the Pt nanoparticles by pore confinement and diffusion of oxygen molecules.     

Insert Zn Nanoparticles into the 3D Porous Carbon Ultrathin Films as a Superior Anode Material for Lithium Ion Battery

A flexible strategy is exploited to insert Zn nanoparticles into the pores of highly stable 3D network of carbon ultrathin films (P‐Zn/C) that can effectively localize the postformed Zn nanoparticles, thereby solving the problem of structural degradation, and thus achieve improved anode performance. A maximum capacity of 657.3 mA h g⁻¹ at a current density of 200 mA g⁻¹ after 50 cycles is achieved for P‐Zn/C. Even at a high current density of 2 A g⁻¹, a capacity of 653 mA h g⁻¹ is maintained after 1000 cycles, indicating that it could be a promising anode for lithium ion batteries. By comparing the capacitive and diffusion contribution qualitatively and quantitatively, the result reveals that the enhanced electrochemical performance mainly originates from the pseudocapacitance storage mechanism.