Water‐Dispersible Silicon‐Quantum‐Dot‐Containing Micelles Self‐Assembled from an Amphiphilic Polymer

The dispersion of silicon quantum dots (Si QDs) in water has not been established as well as that in organic solvents. It is now demonstrated that the excellent dispersion of Si QDs in water with photoluminescence (PL) quantum yields (QYs) comparable to those for hydrophobic Si QDs can be realized by combining the processes of hydrosilylation and self‐assembly. Hydrogen‐passivated Si QDs are initially hydrosilylated with 1‐dodecence. The toluene solution of the resulting dodecyl‐passivated Si QDs is mixed with the water solution of the amphiphilic polymer of Pluronic F127 to form an emulsion. Dodecyl‐passivated Si QDs are encapsulated in the micelles self‐assembled from F127 in the emulsion. The size of the Si‐QD‐containing micelles may be tuned in the range from 10 to 100 nm. Although self‐assembly in the emulsion causes the PL QY of Si QDs to decrease, after a few days of storage in ambient conditions, Si QDs encapsulated in the water‐dispersible micelles exhibit recovered PL QYs of ≈24% at the PL wavelength of ≈680 nm. The intensity of the PL from Si QDs encapsulated in the water‐dispersible micelles is >90% of the original value after 60 min ultraviolet illumination, indicating excellent photostability.     

Multicolor Light‐Emitting Diodes with MoS2 Quantum Dots

Molybdenum disulfide (MoS₂) quantum dots (QDs) are known for their excitation‐wavelength‐dependent photoluminescent (PL) properties. However, the mechanism of this phenomenon is still unclear. Here, small size MoS₂ QDs with a narrow size distribution are synthesized. Based on the decay study and PL dynamics, a reasonable radiation model is presented to understand the special PL properties, i.e., the carrier recombination in the localized surface defect states generated the PL. Accordingly, this optical property is used to fabricate multicolor light‐emitting devices with the same MoS₂ QDs. The emission color covers the full visible spectrum from blue to red, only by adjusting the thickness of the down‐conversion QD layers.     

Assessing Carrier Recombination Processes in Type‐II SiGe/Si(001) Quantum Dots

In this work, it is shown how different carrier recombination paths significantly broaden the photoluminescence (PL) emission bandwidth observed in type‐II self‐assembled SiGe/Si(001) quantum dots (QDs). QDs grown by molecular beam epitaxy with very homogeneous size distribution, onion‐shaped composition profile, and Si capping layer thicknesses varying from 0 to 1100 nm are utilized to assess the optical carrier‐recombination paths. By using high‐energy photons for PL excitation, electron‐hole pairs can be selectively generated either above or below the QD layer and, thus, clearly access two radiative carrier recombination channels. Fitting the charge carrier capture‐, loss‐ and recombination‐dynamics to PL time‐decay curves measured for different experimental configurations allows to obtain quantitative information of carrier capture‐, excitonic‐emission‐, and Auger‐recombination rates in this type‐II nano‐system.     

Size‐Dependent Structural and Optical Characteristics of Glucose‐Derived Graphene Quantum Dots

It is of scientific importance to obtain graphene quantum dots (GQDs) with narrow‐size distribution in order to unveil their size‐dependent structural and optical properties, thereby further to explore the energy band diagram of GQDs. Here, a soft‐template microwave‐assisted hydrothermal method to prepare GQDs with diameters less than 5 nm ± 0.55 nm is reported. The size‐dependent photoluminescence (PL) quantum yield (QY) decay lifetime and electron energy loss spectroscopy (EELS) of the GQDs are studied systematically. The QY of the GQDs with an average diameter of 2 nm is the highest (15%) among all the samples investigated and the QY decreases with increasing diameter of the GQDs. The size‐dependence of the PL decay lifetime is also observed. The result suggests that spatial confinement effects related to radiative relaxation play an important role in the size‐dependent decay lifetime. A realistic energy band diagram of the GQDs is deduced from the experimental results.     

Tunable and High Photoluminescence Quantum Yield from Self‐Decorated TiO2 Quantum Dots on Fluorine Doped Mesoporous TiO2 Flowers by Rapid Thermal Annealing

Herein a novel approach is reported to achieve tunable and high photoluminescence (PL) quantum yield (QY) from the self‐grown spherical TiO₂ quantum dots (QDs) on fluorine doped TiO₂ (F‐TiO₂) flowers, mesoporous in nature, synthesized by a simple solvothermal process. The strong PL emission from F‐TiO₂ QDs centered at ≈485 nm is associated with shallow and deep traps, and a record high PL QY of ≈5.76% is measured at room temperature. Size distribution and doping of F‐TiO₂ nanocrystals (NCs) are successfully tuned by simply varying the HF concentration during synthesis. During the post‐growth rapid thermal annealing (RTA) under vacuum, the arbitrary shaped F‐TiO₂ NCs transform into spherical QDs with smaller sizes and it shows dramatic enhancement (≈163 times) in the PL intensity. Electron spin resonance (ESR) and X‐ray photoelectron spectroscopy (XPS) confirm the high density of oxygen vacancy defects on the surface of TiO₂ NCs. Confocal fluorescence microscopy imaging shows bright whitish emission from the F‐TiO₂ QDs. Low temperature and time resolved PL studies reveal that the ultrafast radiative recombination in the TiO₂ QDs results in highly efficient PL emission. A highly stable, biologically inert, and highly fluorescent TiO₂ QDs/flowers without any capping agent demonstrated here is significant for emerging applications in bioimaging, energy, and environmental cleaning.     

All‐optical modulation based on silicon quantum dot doped SiOx:Si‐QD waveguide

All‐optical modulation based on silicon quantum dot doped SiO_x:Si‐QD waveguide is demonstrated. By shrinking the Si‐QD size from 4.3 nm to 1.7 nm in SiO_x matrix (SiO_x:Si‐QD) waveguide, the free‐carrier absorption (FCA) cross section of the Si‐QD is decreased to 8 × 10⁻¹⁸ cm² by enlarging the electron/hole effective masses, which shortens the PL and Auger lifetime to 83 ns and 16.5 ps, respectively. The FCA loss is conversely increased from 0.03 cm⁻¹ to 1.5 cm⁻¹ with the Si‐QD size enlarged from 1.7 nm to 4.3 nm due to the enhanced FCA cross section and the increased free‐carrier density in large Si‐QDs. Both the FCA and free‐carrier relaxation processes of Si‐QDs are shortened as the radiative recombination rate is enlarged by electron–hole momentum overlapping under strong quantum confinement effect. The all‐optical return‐to‐zero on‐off keying (RZ‐OOK) modulation is performed by using the SiO_x:Si‐QD waveguides, providing the transmission bit rate of the inversed RZ‐OOK data stream conversion from 0.2 to 2 Mbit/s by shrinking the Si‐QD size from 4.3 to 1.7 nm.     

PbSe量子点荧光匹配气体吸收光谱方法研究

PbSe量子点(PbSe-QDs)是红外波段的典型纳米材料,其具有大的玻尔半径、小的体材料禁带宽度(玻尔半径是46 nm,体材料禁带宽度是0.28 eV),因此,在近红外区域,PbSe-QDs具有强大的尺寸受限效应和较高的量子产出率。本文对不同尺寸的PbSe量子点的荧光光谱特性进行了研究,提出了一种通过调节PbSe量子点的量子尺寸匹配气体吸收光谱的方法。采用配位溶剂的方法制备了尺寸为4.6和6.1 nm的PbSe量子点,将该PbSe量子点沉积到GaN发光芯片上并经过紫外光照处理和固化后制成了光致发光的近红外光源,其中4.6 nm的PbSe-QDs的沉积厚度为671.5 μm,而6.1 nm的PbSe-QDs的沉积厚度为48 μm。将制成的近红外光源应用到C₂H₂气体和NH₃气体的检测实验中,实验结果表明,通过改变PbSe量子点的尺寸可以调节光源光致发光峰的位置,从而覆盖目标气体在近红外波段的吸收谱线。4.6 nm的光源发射光谱包含了1 500～1 550 nm之间的C₂H₂气体的全部的吸收谱;6.1 nm的光源发射光谱包含了1 900～2 060 nm之间的NH₃气体的全部的吸收谱。这种利用PbSe量子点尺寸的可调性匹配对应气体吸收谱的方法是可行和有效的,具有广阔的应用前景。     

Effect of Mercaptocarboxylic Acids on Luminescent Properties of CdTe Quantum Dots

CdTe quantum dots (QDs) were prepared in an aqueous solution using various mercaptocarboxylic acids, such as 3-mercaptopropionic acid (MPA) and thioglycolic acid (TGA), as stabilizing agents. The experimental result indicated that these stabilizing agents played an important role for the properties of the QDs. Although both TGA and MPA-capped CdTe QDs exhibited the tunable photoluminescence (PL) from green to red color, the TGA-capped QDs revealed a higher PL quantum yield (QY) up to 60% than that of MPA-capped QDs (up to 50%) by using the optimum preparation conditions, such as a pH value of ~11.2 and a TGA/Cd molar ratio of 1.5. PL lifetime measurements indicate that the TGA-capped QDs exhibited a short average lifetime while the MPA-capped QDs revealed a long one. Furthermore, the average lifetime of the TGA-capped QDs increased with the increase of the QDs size, while a decreased lifetime for the MPA-capped QDs was obtained. This means that the PL lifetime depended strongly on the surface state of the CdTe QDs. These results should be utilized for the preparation and applications of QDs.     

Si quantum dot structures and their applications

This paper presents briefly the history of emission study in Si quantum dots (QDs) in the last two decades. Stable light emission of Si QDs and NCs was observed in the spectral ranges: blue, green, orange, red and infrared. These PL bands were attributed to the exciton recombination in Si QDs, to the carrier recombination through defects inside of Si NCs or via oxide related defects at the Si/SiOx interface. The analysis of recombination transitions and the different ways of the emission stimulation in Si QD structures, related to the element variation for the passivation of surface dangling bonds, as well as the plasmon induced emission and rare earth impurity activation, have been presented.The different applications of Si QD structures in quantum electronics, such as: Si QD light emitting diodes, Si QD single union and tandem solar cells, Si QD memory structures, Si QD based one electron devices and double QD structures for spintronics, have been discussed as well. Note the significant worldwide interest directed toward the silicon-based light emission for integrated optoelectronics is related to the complementary metal-oxide semiconductor compatibility and the possibility to be monolithically integrated with very large scale integrated (VLSI) circuits. The different features of poly-, micro- and nanocrystalline silicon for solar cells, that is a mixture of both amorphous and crystalline phases, such as the silicon NCs or QDs embedded in a α-Si:H matrix, as well as the thin film 2-cell or 3-cell tandem solar cells based on Si QD structures have been discussed as well. Silicon NC based structures for non-volatile memory purposes, the recent studies of Si QD base single electron devices and the single electron occupation of QDs as an important component to the measurement and manipulation of spins in quantum information processing have been analyzed as well.     

Sb/As intermixing in self-assembled GaSb/GaAs type II quantum dot systems and control of their photoluminescence spectra

The intermixing of Sb and As atoms induced by rapid thermal annealing (RTA) was investigated for type II GaSb/GaAs self-assembled quantum dots (QD) formed by molecular beam epitaxy growth. Just as in InAs/GaAs QD systems, the intermixing induces a remarkable blueshift of the photoluminescence (PL) peak of QDs and reduces the inhomogeneous broadening of PL peaks for both QD ensemble and wetting layer (WL) as consequences of the weakening of quantum confinement. Contrary to InAs/GaAs QDs systems, however, the intermixing has led to a pronounced exponential increase in PL intensity for GaSb QDs with annealing temperature up to 875 °C. By analyzing the temperature dependence of PL for QDs annealed at 700, 750 and 800 °C, activation energies of PL quenching from QDs at high temperatures are 176.4, 146 and 73.9 meV. The decrease of QD activation energy with annealing temperatures indicates the reduction of hole localization energy in type II QDs due to the Sb/As intermixing. The activation energy for the WL PL was found to drastically decrease when annealed at 800 °C where the QD PL intensity surpassed WL.     

基于量子点-CBP混合层的量子点LED的制备

采用一锅法制备出高质量的具有核壳结构的Cd Se@Zn S、Cd Zn S/Zn S量子点。将量子点混入空穴传输材料CBP中形成复合的有源材料,经过几步简单的旋涂操作,制备出相应的绿光、蓝光量子点LED器件。这种方法利用了油溶性量子点和CBP材料的相容性,减少了旋涂操作的步骤,有利于快速制备基于量子点的电致发光器件。基于两步旋涂操作制备的量子点LED,由于阴极与复合有源层之间的能级差较大,导致需要较高的开启电压。在CBP材料中,注入的载流子有可能会被量子点表面缺陷捕获,形成表面态的发光。表面态发光的相对强度依赖于载流子浓度。     

2018年5期 电子期刊

研究了不同Mn/Pb量比的Mn掺杂CsPbCl₃（Mn：CsPbCl₃）钙钛矿量子点的发光性质。Mn/Pb的量比增加引起的Mn²⁺发光峰的红移,被认为是来源于高浓度Mn²⁺掺杂下的Mn²⁺-Mn²⁺对。进一步研究了Mn：CsPbCl₃量子点的发光效率与Mn/Pb的量比之间的关系,发现随着量比达到5：1时,其发光效率明显下降。这种发光效率下降是由于Mn掺杂浓度引起的发光猝灭。Mn：CsPbCl₃量子点的变温发光光谱证实,随着温度的升高,Mn离子发光峰蓝移,线宽加宽,但其发光强度明显增加。     

Manufacturing of Volumetric Glass–Based Composites with Single‐ and Double‐QD Doping

Quantum dot (QD)‐based light‐emitting materials are gaining increased attention because of their easily tunable optical properties desired for various applications in biology, optoelectronics, and photonics. However, few methods can be used to manufacture volumetric materials doped with more than one type of QD other than QD‐polymer hybrids, and they often require complicated preparation processes and are prone to luminescence quenching by QD aggregation and separation from the matrix. Here, simultaneous doping of a volumetric glass‐based nanocomposite with two types of QDs is demonstrated for the first time in a single‐step process using the nanoparticle direct doping method. Glass rods doped with CdTe, CdSe/ZnS, or co‐doped with both QDs, are obtained. Photoluminescence and lifetime experiments confirm temperature‐dependent double emission with maxima at 596 and 720 nm with mean lifetimes up to 16 ns, as well as radiative energy transfer from the short wavelength–emitting QDs to the long wavelength–emitting QDs. This approach may enable the simple and cost‐efficient manufacturing of bulk materials that produce multicolor luminescence with cascade excitation pumping. Applications that could benefit from this include broadband optical fiber amplifiers, backlight systems in LCD screens, high‐power LEDs, or down‐converting solar concentrators used to increase the efficiency of solar panels.     

Mn掺杂ZnSe量子点变温发光性质研究

量子点(QD)照明器件中电流导致的焦耳热会使其工作温度高于室温,因此研究量子点的发光热稳定性十分重要。本文利用稳态光谱和时间分辨光谱研究了具有不同壳层厚度的Mn掺杂ZnSe(Mn: ZnSe)量子点的变温发光性质,温度范围是80～500 K。实验结果表明,厚壳层(6.5单层(MLs))Mn: ZnSe量子点的发光热稳定性要优于薄壳层(2.6 MLs)的量子点。从80 K升温到400 K的过程中,厚壳层Mn: ZnSe量子点的发光几乎没有发生热猝灭,发光量子效率在400 K高温下依然可以达到60%。通过对比Mn: ZnSe量子点的变温发光强度与荧光寿命,对Mn: ZnSe量子点发光热猝灭机制进行了讨论。最后,为了研究Mn: ZnSe量子点的发光热猝灭是否为本征猝灭,对具有不同壳层厚度的Mn: ZnSe量子点进行了加热-冷却循环(300-500-300 K)测试,发现厚壳层的Mn: ZnSe量子点的发光在循环中基本可逆。因此,Mn: ZnSe量子点可以适用于照明器件,即使器件中会出现不可避免的较强热效应。     

Quantum confinement in amorphous silicon quantum dots embedded in silicon nitride

Amorphous silicon quantum dots (a-Si QDs) were grown in a silicon nitride film by plasma enhanced chemical vapor deposition. Transmission electron micrographs clearly demonstrated that a-Si QDs were formed in the silicon nitride. Photoluminescence and optical absorption energy measurement of a-Si QDs with various sizes revealed that tuning of the photoluminescence emission from 2.0 to 2.76 eV is possible by controlling the size of the a-Si QD. Analysis also showed that the photoluminescence peak energy E was related to the size of the a-Si QD, a (nm) by E(eV) = 1.56+2.40/a(2), which is a clear evidence for the quantum confinement effect in a-Si QDs.     

GaAs间隔层厚度对InAs/GaAs量子点分子光学性质的影响

采用光致荧光发射谱(PL)和时间分辨荧光发射谱(TRPL)研究了GaAs间隔层厚度对自组装生长的双层InAs/GaAs量子点分子光学性质的影响.首先,测量低温下改变激发强度的PL谱,底层量子点和顶层量子点的PL强度比值随激发强度发生变化,表明两层量子点之间的耦合作用和层间载流子的转移随着间隔层厚度变大而变弱.接着测量改变温度的PL谱,量子点荧光光谱峰值位置(Emax)、半峰全宽及积分强度随温度发生变化,表明GaAs间隔层厚度直接影响到量子点内载流子的动力学过程和量子点发光的热淬灭过程.最后,TRPL测量发现60mL比40mL间隔层厚度样品的载流子隧穿时间有明显延长.     

Anti-Reflection Characteristics of Si Nanowires for Enhanced Photoluminescence from CdTe/CdS Quantum Dots

CdTe/CdS quantum dots(QDs) are fabricated on Si nanowires(NWs) substrates with and without Au nanoparticles(NPs). The formation of Au NPs on Si NWs can be certified as shown in scanning electron microscopy images. The optical properties of samples are also investigated. It is interesting to find that the photoluminescence(PL) intensity of Cd Te/Cd S QD films on Si nanowire substrates with Au NPs is significantly increased,which can reach 8-fold higher than that of samples on planar Si without Au NPs. The results of finite-difference time-domain simulation indicate that Au NPs induce stronger localization of electric field and then boost the PL intensity of QDs nearby. Furthermore, the time-resolved luminescence decay curve shows the PL lifetime, which is about 5.5 ns at the emission peaks of QD films on planar, increasing from 1.8 ns of QD films on Si NWs to4.7 ns after introducing Au NPs into Si NWs.     

衬底钝化处理对CsPbBr3 量子点薄膜发光稳定性影响

钙钛矿量子点因具有发光谱线窄、发光效率高、发光波长可调谐等优异的光学性能,在照明、显示、激光和太阳能电池等领域得到了广泛研究。然而,钙钛矿材料的稳定性问题,一直制约着其在光电器件中的应用。其中,钙钛矿材料在空气中受潮易分解的不稳定性尤为突出,这将严重影响其发光性质。为此,研究人员采用多种手段来改善钙钛矿材料的稳定性。目前,常见的方法是将一些具有疏水性的聚合物材料（例如POSS,PMMA等）引入到钙钛矿纳米晶中,或将钙钛矿纳米晶嵌入到介孔二氧化硅材料中,避免钙钛矿纳米晶暴露于空气中破坏其结构,以此来增强钙钛矿材料的发光稳定性。此外,钝化处理钙钛矿纳米晶表面,也是改善钙钛矿发光稳定性的一种常用方法。这些方法虽然在一定程度上可以改善钙钛矿的发光稳定性,但是在与有机物合成的过程中不免会引入其他有机官能团,介孔二氧化硅的引入,其处理方式相对复杂,而对钙钛矿纳米晶表面的钝化处理会破坏材料的原有结构。以上问题,都会影响钙钛矿的发光性质,不利于其在光电器件中的应用。硅（Si）具有低成本、大尺寸、高质量、导电好等优点,常被选作钙钛矿量子点光电器件的衬底材料。但是,由于Si衬底长时间暴露于空气,其表面易形成一层具有硅烷醇基团（Si-OH）的亲水性薄膜,这将对硅基钙钛矿器件的稳定性产生影响。因此,对Si表面进行钝化处理,破坏其表面Si-OH键,可以降低衬底表面的亲水性,增强疏水性,从而提高钙钛矿材料在器件中的稳定性。本研究使用氢氟酸（HF）对Si衬底表面进行钝化处理,发现钝化处理后的Si衬底表面与水的接触角由50.4°逐渐增大至87.7°,表明Si衬底表面由亲水性逐渐转变为疏水性。利用场致发射扫描电子显微镜(FE-SEM)测试发现,钝化处理后的Si衬底表面变粗糙,并且其表面上的CsPbBr₃量子点(CsPbBr₃ QDs)相对于未处理表面的分散性较好。利用光致发光(PL)光谱研究不同钝化处理时间的Si衬底表面上的CsPbBr₃ QDs薄膜的发光性质。其中,处理与未处理的Si衬底表面上CsPbBr₃QDs薄膜的PL积分强度随功率变化拟合值分别为1.12和1.203,表明其发光机制为激子发光。温度依赖性的PL光谱分析显示,随着温度的升高（10～300 K）,由于晶格热膨胀使CsPbBr₃ QDs带隙增大,发光峰位逐渐蓝移。并且,随着衬底钝化处理时间的增加,CsPbBr₃ QDs薄膜的发光热稳定性逐渐增强,最佳热稳定性可达220 K。而时间依赖性的PL光谱则进一步说明,钝化处理后的Si衬底表面CsPbBr₃QDs薄膜发光的时间稳定性逐渐增强,最高发光时间稳定性可达15 d。因此,通过简单而有效的对Si衬底表面进行钝化处理,可以有效减少了Si表面亲水基团,提高CsPbBr₃QDs薄膜的发光稳定性,为增强钙钛矿量子点在光电器件中的稳定性应用提供了新的研究思路。     

Ab Initio Simulation of Charge Transfer at the Semiconductor Quantum Dot/TiO2 Interface in Quantum Dot‐Sensitized Solar Cells

Quantum dot‐sensitized solar cells (QDSSCs) have emerged as a promising solar architecture for next‐generation solar cells. The QDSSCs exhibit a remarkably fast electron transfer from the quantum dot (QD) donor to the TiO₂ acceptor with size quantization properties of QDs that allows for the modulation of band energies to control photoresponse and photoconversion efficiency of solar cells. To understand the mechanisms that underpin this rapid charge transfer, the electronic properties of CdSe and PbSe QDs with different sizes on the TiO₂ substrate are simulated using a rigorous ab initio density functional method. This method capitalizes on localized orbital basis set, which is computationally less intensive. Quite intriguingly, a remarkable set of electron bridging states between QDs and TiO₂ occurring via the strong bonding between the conduction bands of QDs and TiO₂ is revealed. Such bridging states account for the fast adiabatic charge transfer from the QD donor to the TiO₂ acceptor, and may be a general feature for strongly coupled donor/acceptor systems. All the QDs/TiO₂ systems exhibit type II band alignments, with conduction band offsets that increase with the decrease in QD size. This facilitates the charge transfer from QDs donors to TiO₂ acceptors and explains the dependence of the increased charge transfer rate with the decreased QD size.     

ZnCuInS量子点的变温光致发光

测量了红色和深红色发光的ZnCuInS量子点在100~300 K温度范围内的光致发光光谱,研究了ZnCuInS量子点的发光机理,对ZnCuInS量子点的发光峰值能量、线宽和积分强度与温度的关系进行了细致的分析。在ZnCuInS量子点中观察到一种反常的发光峰值能量随着温度升高而增加的现象,同时发现ZnCuInS量子点的发光线宽很宽,约为300 meV,拟合积分强度与温度的关系曲线所得到的激活能为100 meV。这些结果表明,ZnCuInS量子点的发光不可能只来源于一种发光中心,而应该是来源于ZnCuInS量子点内部及表面的多种缺陷相关的多种发光中心组合。