Limiting stability temperatures for copper sols stabilized by poly(<Emphasis Type="Italic">N</Emphasis>-vinyllactams)

It has been shown that stable copper sols cannot be prepared through the reduction of copper ions in aqueous solutions of poly(N-vinyllactams) in the presence of poly(N-vinylpyrrolidone) in the temperature range 50–70°C, while in the presence of poly(N-vinylcaprolactam), the said sols cannot be prepared at temperatures below ～12°C. This tendency is related to the thermodynamic instability of complexes formed via noncovalent interactions of copper nanoparticles with polymer macromolecules in corresponding temperature ranges. Stable sols synthesized in the presence of the above polymers at other temperatures rapidly lose stability in the said temperature ranges, and this effect is accompanied by the aggregation of metal particles. The experimental results provide evidence that there is a relationship between the stability of complexes macromolecules-metal nanoparticles and the thermodynamic quality of the solvent.     

Thermosensitivity of poly(<Emphasis Type="Italic">N</Emphasis>-vinylpyrrolidone): Effect of transition-metal halides

The effect of the halides of a series of transition metals on the properties of aqueous solutions of poly(N-vinylpyrrolidone) is studied. It is shown that the introduction of ZnCl₂ into solutions of poly(N-vinylpyrrolidone) causes phase separation with an increase in temperature. In the presence of halides of other transition metals (CdCl₂, CuCl₂), this phenomenon is not observed. However, the addition of HCl and/or alkali-metal halides to these systems likewise gives rise to phase separation, and in the ZnCl₂-based systems, the cloud point of solution substantially decreases with the introduction of alkali-metal salts. The same situation is observed in the case of polyvinylcaprolactam. Thus, it is concluded that the observed phenomena are associated with the formation of MtCl₄²⁻ complex anions in solutions that promote the globulization of polymer chains with participation of water molecules surrounding polymer chains and cations of transition-metal salts bound to complexes with C=O groups of lactam rings of the polymers.     

Grafting of poly-<Emphasis Type="Italic">N</Emphasis>-methacryloylaminodeoxyglucose on poly-<Emphasis Type="Italic">N</Emphasis>-vinylpyrrolidone

A graft copolymer simulating glycoprotein was prepared by reaction of poly-N-methacryloylaminodeoxyglucose containing terminal amino group with a copolymer of N-vinylpyrrolidone and acrylic acid N-hydroxysuccinimide ester.Translated from Zhurnal Prikladnoi Khimii, Vol. 77, No. 8, 2004, pp. 1356–1359.Original Russian Text Copyright © 2004 by Nazarova, Pavlov, Kever, Afanaseva, Panarin.     

Nanoporous polymer networks based on <Emphasis Type="Italic">N</Emphasis>-vinylpyrrolidone

A method of preparing nanoporous polymer networks containing N-vinylpyrrolidone units via the crosslinking radical copolymerization in bulk performed in the presence of amphiphilic N-vinylpyrrolidone copolymers with the branched morphology and different physicochemical characteristics is developed. It is shown that macromolecular nanoobjects may be extracted from polymer composites using good solvents, such as chloroform and isopropyl alcohol. The physicomechanical, thermal, and diffusion–sorption properties of polymer composites before and after their extraction are compared. SEM and low-temperature nitrogen adsorption measurements reveal that nanosized pores are contained in the network copolymers after extraction of the polymer additives. The specific surface area, total pore volume, pore size, and pore-size distribution are determined. The maximum specific surface area of polymer networks attains ~26 m²/g, and mesopores compose the main type of pores.     

Molecular properties of the copolymers of <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-diallyl-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylammonium chloride and maleic acid

The hydrodynamic and conformational properties of molecules of poly(N,N-diallyl-N,N-dimethylammonium chloride) and N,N-diallyl-N,N-dimethylammonium chloride-maleic acid copolymers of different compositions in solutions with various ionic-strength and pH values, as well as of the polyelectrolyte complex based on the copolymer with dodecyl sulfate anions in chloroform, are studied. For poly(N,N-diallyl-N,N-dimethylammonium chloride) molecules in a 1 M NaCl solution, the Kuhn segment length and the hydrodynamic diameter of the chain are estimated as A = 3.9 nm and d = 0.48 nm, respectively. In acidic solutions with pH 3.5, the copolymers demonstrate behavior typical for polyelectrolytes. In an alkaline solution with pH 13, when 1 M NaCl is added to the solution of the copolymer containing 29 mol % maleic acid units, there is an antipolyelectrolyte effect that manifests itself as an increase in the intrinsic viscosity of the copolymer and in the hydrodynamic radius of its molecules. It is found that an increase in the fraction of maleic acid units in the copolymer from 12 to 42 mol % brings about a reduction in the equilibrium rigidity of its macromolecules from 4.1 to 2.2 nm. The equilibrium rigidity of polyelectrolyte-complex molecules is higher than that of initial copolymer molecules owing to steric interactions arising between the aliphatic chains of dodecyl sulfate anions. In an electric field, the molecules of the complex are oriented owing to the induced dipole moment resulting from the displacement of dodecyl sulfate anions along the chain contour.     

Copolymer of <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-diallyl-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylammonium chloride with maleic acid as drug carrier

A copolymer of N,N-diallyl-N,N-dimethylammonium chloride with maleic acid of constant composition was prepared under the conditions of radical initiation. The possibility of the functionalization of the copolymer with drugs containing amino groups by polymer-analogous transformations was examined. Conditions were found for preparing conjugates of the copolymer with isoniazid. The structures and the quantitative compositions of the conjugates were determined by ¹³С NMR spectroscopy, and the possibility of preparing conjugates with controlled drug content was demonstrated.     

Surface properties of chitosan composites with poly(<Emphasis Type="Italic">N</Emphasis>-vinylpyrrolidone) and montmorillonite

Surface properties of composites containing chitosan (Ch) with poly(N-vinylpyrrolidone) (PVP) and montmorillonite (MMT) additives were investigated by contact angle measurements, thermogravimetric analysis (TGA), atomic force microscopy (AFM) and tensile tests. Composites were obtained by drop casting suspensions of montmorillonite (1 wt % relative to chitosan) and polymer (1 wt %) in 0.1 mol/dm³ acetic acid. Contact angle measurements for diiodomethane (D) and glycerol (G) on the surfaces of the chitosan films, PVP and their composite films were made; surface free energies were also calculated. It was found that the PVP/MMT or Ch/PVP/MMT blend surface is enriched with a high surface energy component, i.e., polyvinylpyrrolidone. The roughness of chitosan composites increases after the addition of montmorillonite; this may indicate an increase in the heterogeneity of this composition in comparison to other compositions. The TGA thermograms and mass loss percentages at different decomposition temperatures showed that the thermal stability of the binary composite slightly increases upon the addition of polyvinylpyrrolidone. The mechanical properties such as tensile strength and Young modulus depend on the composition and varied non-uniformly.     

Effects of ionization on the phase behavior of poly(<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide-co-acrylic acid) and poly(<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-diethylacrylamide-co-acrylic acid) in water

Phase transitions of poly(N-isopropylacrylamide-co-acrylic acid) (PiPA-AA) and poly(N,N- diethylacrylamide-co-acrylic acid) (PdEA-AA) in water have been investigated by means of turbidimetry, Fourier transform infrared (FTIR) spectroscopy and differential scanning calorimetry (DSC). The phase transition temperatures (T_p) of these copolymers increase with the degree of ionization () of the acrylic acid (AA) units, which in turn is dependent on the pH of the solutions. Apparent values of pK_a for the AA units, determined from the pH dependencies of T_p, are 4.7 and 5.4 for PiPA-AA and PdEA-AA, respectively. Differences between T_p for PiPA-AA and T_p for PiPA homopolymer (T_p) are +1.5 and –0.2 °C/mol% of AA at =1 and 0, respectively. The values of T_p for PdEA-AA are +2.6 (ionic) and –0.5 (nonionic)°C/mol%, indicating that the incorporated AA units have a larger effect on PdEA than on PiPA. DSC measurements performed with each of these copolymers at different pH values show a linear relationship between T_p and the enthalpy of transition (H). IR measurements of PiPA-AA show that the profiles of IR bands from both iPA and AA units exhibit critical changes at T_p of the copolymer. Heating the solution above T_p leads to shifts of the amide II, C–H stretch, and C–H bend bands from the iPA units toward lower wavenumbers, as well as a shift of the amide I band from the iPA units toward higher wavenumbers. A decrease in the intensity of the symmetric C=O stretch IR band from carboxylate anions (1560 cm^–1), and an increase in the intensity of the C=O stretch band from COOH groups (1705 cm^–1) suggest that a partial protonation of the carboxylate groups (COO^–+H⁺COOH) takes place upon the phase transition.     

Copolymerization of <Emphasis Type="Italic">N</Emphasis>-vinylpyrrolidone with new allyl monomers

Radical copolymerization of N-vinylpyrrolidone with diallylacylhydrazines, 2,2-diallyl-1,1,3,3-tetraethylguanidinium chloride, N-allyl-2-azanorborn-5-ene, and N-allylmaleimide in the bulk and in organic solvents was studied. The kinetic features of the reactions were examined, the structures of the copolymers obtained were determined, and their physicochemical and biological properties were studied.     

Thiocyanation of <Emphasis Type="Italic">N</Emphasis>-arylsulfonyl-, <Emphasis Type="Italic">N</Emphasis>-aroyl-, and <Emphasis Type="Italic">N</Emphasis>-[(<Emphasis Type="Italic">N</Emphasis>-arylsulfonyl)benzimidoyl]-1,4-benzoquinone imines

Reactions of thiocyanate ion with N-aroyl-, N-arylsulfonyl-, and N-(N-arylsulfonylbenzimidoyl)-1,4-benzoquinone imines follow the 1,4-addition pattern, and the adducts undergo intramolecular cyclization to give the corresponding N-substituted 5-amino-1,3-benzoxathiol-2-ones as final products.     

Molecular and associative properties of <Emphasis Type="Italic">N</Emphasis>-vinylpyrrolidone copolymers with <Emphasis Type="Italic">N</Emphasis>-crotonoylaminocaproic acid in dilute solutions

The random copolymers of N-vinylpyrrolidone and N-crotonoylaminocaproic acid attractive for the modification of drugs are studied by static and dynamic light scattering, viscometry, and sedimentation-diffusion analysis. The content of functional groups in the copolymers is 14.1–27.0 mol %. Analysis is performed in 0.1 N aqueous solutions of sodium acetate and dimethylformamide. The molecular characteristics of the copolymers with various composition are determined. It is shown that supramolecular structures are present in copolymer solutions and their amount depends on copolymer composition; the effect of solvent on the formation of these structures is ascertained.     

Synthesis of (<Emphasis Type="Italic">E</Emphasis>)-<Emphasis Type="Italic">N</Emphasis>-(3-alkoxy-4-acyloxyphenylmethylene)-<Emphasis Type="Italic">N</Emphasis>-(<Emphasis Type="Italic">e</Emphasis>-cyclohexyl)amines

Previously unknown E isomers of azomethines (Schiff bases) were synthesized from vanillal and vanillin esters by their reaction with cyclohexylamine.     

Conformations and properties of <Emphasis Type="Italic">O</Emphasis>-Alkyl-<Emphasis Type="Italic">S</Emphasis>-(2-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dialkylamino)-ethylmethylthiophosphonates

Conformers of the biologically active compounds CH₃P(O)(OR)(SCH₂CH₂NR ₂ ^′ ), where (I) R = i-C₄H₉, R′ = C₂H₅ and (II) R = C₂H₅, R′ = i-C₃H₇, are calculated within the AM1 level of theory. The elongated and twisted forms with maximum and minimum distances between a nitrogen atom and those of a phosphorus tetrahedron, respectively, and bearing a syn and anti oriented alkoxy group relative to a phosphoryl oxygen, are studied. It is found that the differences between the energy, electronic, and geometric parameters of these forms are apparent in differences between their properties, e.g., the ability to participate in complexation and protonation, reactions that to some extent simulate the interaction between a substance and a biological object.     

<Emphasis Type="Italic">Z</Emphasis>-and <Emphasis Type="Italic">E</Emphasis>-conformers of <Emphasis Type="Italic">N</Emphasis>-chloroacetylcytisine

N-Chloroacetylcytisine was synthesized by acylation of (–)-cytisine. Stable Z- and E-conformers with respect to rotational isomerism around the N-12–CO bond were found in PMR spectra at room temperature. The point at which PMR resonances of the Z- and E-conformers coalesced upon heating was measured. The transition barrier between the conformers was estimated.     

Synthesis of graft copolymers of wood and <Emphasis Type="Italic">N</Emphasis>-vinylpyrrolidone

Lignocellulose copolymers with grafted lactam rings were prepared by graft copolymerization of wood with N-vinylpyrrolidone initiated by Fe²⁺-H₂O₂. The principal features of their formation were investigated as functions of reactant concentrations, temperature, and polymerization time. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 2, pp. 174–176, March–April, 2008.     

Membranotropic properties of fullerene-containing amphiphilic (co)polymers of <Emphasis Type="Italic">N</Emphasis>-vinylpyrrolidone

The effect of fullerene-containing amphiphilic (co)polymers of N-vinylpyrrolidone (C₆₀/PVP) differed in composition and topology of the polymer chains on the membrane structure of phosphatidylcholine liposomes was studied. Using the method of fluorescent probes it was found that the C₆₀/PVP structures under study are localized in the phosphatidylcholine membrane in the region of glycerol fragments and fatty acid chains of phospholipids. The C₆₀/PVP copolymers form complexes with 2,7-dibromoproflavin and pyrene probes. The effective equilibrium constants of the probe–C₆₀/PVP complexes in aqueous solutions and in the liposome membrane were determined. It is most likely that the fullerene-containing (co)polymers of N-vinylpyrrolidone form complexes not only with fluorescent probes but also with phospholipids of the liposome membrane, which reduces the stability of the probe–C₆₀/PVP complex.     

Synthesis of amino acid conjugates of glycyrrhizic acid using <Emphasis Type="Italic">N</Emphasis>-hydroxyphthalimide and <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>'-dicyclohexylcarbodiimide

Synthesis of amino acid conjugates of glycyrrhizic acid with the use of N-hydroxyphthalimide, N,N'-dicyclohexylcarbodiimide, and tert-butyl esters of L-amino acids (valine, isoleucine, phenylalanine, and methionine) was performed followed by deprotection with trifluoroacetic acid. The target amino acid conjugates were isolated by column chromatography on silica gel in 40–45% yield. The structure of the prepared compounds was confirmed by IR and ¹³C NMR spectroscopy.     

Reactions of <Emphasis Type="Italic">N</Emphasis>-Allyl- and <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-Diallyltrifluoromethanesulfonamides with Carboxylic Acid Amides under Oxidizing Conditions

Reactions of acetamide and benzamide with N-allyltrifluoromethanesulfonamide in the presence of t-BuOCl–NaI afforded exclusively 2,5-bis(chloromethyl)-1,4-bis(trifluoromethanesulfonyl)piperazine. Analogous reaction with N,N-diallyltrifluoromethanesulfonamide gave mixed halogenation product at only one C=C double bond of the substrate.