磁性阳离子交换树脂的结构与性能分析

利用古埃磁天平法、扫描电镜、粉末Ｘ射线衍射以及分光光度法等检测了化学转化法制备的磁性阳离子交换树脂。结果表明,所制备的树脂内部磁性物质为Ｆｅ３Ｏ４,且在 树脂内部的孔道及表面分布均匀,均被封锁在树脂内部,因而,这类磁性树脂在碱性和中性盐溶液中具有较高的稳定性。此外,树脂的磁化过程并不影响其交换容量。     

强酸性阳离子交换树脂的热稳定性

本文对近年来强酸性阳离子交换树脂作为催化剂在热稳定性方面的改进及其性能的提高作了简要评述。     

强酸阳离子交换树脂催化性能的研究

通过叔丁醇脱水生成异丁烯的反应研究对比了国内外常见种类的凝胶型和大孔型强酸阳离子交换树脂的催化性能，并对树脂的性质，预处理方法，以及其用量和再生程度等因素对树脂催化活性的影响进行了研究。在此基础上，合成了具有较高催化活性的新型大孔强酸阳离子交换树脂。     

732^#强酸性阳离子交换树脂催化缩醛和缩酮的合成

本文研究了732＃强酸性阳离子交换树脂对缩醛和缩酮的催化作用，系统地探讨了各反应因素对反应的影响，研究发现，732＃强酸性阳离子交换树脂具有较高的催化活性，并使后处理简化。     

聚丙烯酸型弱酸阳离子交换树脂111生产工艺的研究

通过控制生产过程中引发剂，互贯方式，溶胀温度，解决了弱酸性阳离子交换树脂小生产工艺的稳定性和耐使用问题。     

化学转化法制备磁性阳离子交换树脂的研究

本文通过化学转化法即化学共沉淀法，分别研究了强酸性和弱酸性阳离子交换树脂的磁转化对相应所得树脂的磁性的影响，制得了磁性毫米级和微米级粒径的强酸性，弱酸性阳离子交换树脂。所得磁性树脂有磁性强，磁性物质分布均匀而且稳定，并保持树脂的原有特性。     

流动注射离子选择电极法自动测定阳离子交换树脂交换容量的研究

基于流动注射离子选择电极法(FIA-ISE)测定痕量Na 原理,建立了一种能自动测定阳离子交换树脂各种交换性能的方法,对影响阳阳离子交换树脂交换容量的各种因素进行考察,筛选出凝胶型强阳离子交换树脂(SACR)交换性能测定的最佳条件:微型交换柱内径3.0mm、长80mm;树脂填充量0.1951g;再生剂HCl浓度为3.0%,其流速为0.90mL/min(7.64m/h),再生剂耗量350mL/g(干树脂);样品为20mg/LNa 溶液,其流速为1.50mL/min;实现了一次测定同时获得SACR的工作交换容量、平衡交换容量、全交换容量、交换速率和树脂利用率。与ASTM法进行对照实验,其结果相关性良好(r=0.9922)。     

金属离子负载修饰阳离子树脂在酯化反应中的研究

将催化精馏中常用作催化填料的强酸性阳离子交换树脂用金属离子负载修饰后，考察了树脂催化性能的改变及树脂结构对催化性能的影响。实验表明，经修饰后树脂的催化能力都高于原树脂，在不分水的情况下，合成乙酸乙酯时乙酸的转化率最高可达73％，具有很好的选择性，金属离子能与树脂的磺酸基团产生络合，提高了树指的催化性能，所形成的新酸中心不会被阳离子交换而失活。     

苏氨酸和谷氨酸在d318树脂上的吸附分离热力学

阴离子交换树脂;苏氨酸;谷氨酸;吸附分离;热力学性质     

用低交换容量聚苯乙烯型强酸性阳离子交换树脂柱色谱分离中性氨基酸

通过磺化苯乙烯 -二乙烯苯共聚物或商品化的聚苯乙烯型强酸性阳离子交换树脂 ( 0 0 1× 7)的逆磺化反应 ,得到一系列不同交换容量的聚苯乙烯型强酸性阳离子交换树脂 .研究了丙氨酸和缬氨酸及缬氨酸和亮氨酸在这些树脂柱上的色谱分离 .结果表明 ,用两种方法得到的树脂对丙氨酸和缬氨酸的色谱分离性能基本相同 ;同时中性氨基酸与聚苯乙烯型强酸性阳离子交换树脂之间的作用包括离子作用和疏水作用 ,且二者之间存在协同作用 .树脂的交换容量较低时对中性氨基酸有更好的分离性能     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.