Kinetics and mechanism of formation of penta-ammineglycinecobalt(III) ion from aquopenta-amminecobalt(III) ion and glycine in acid media

The rates of formation of penta-ammineglycinecobalt(III) ion from aquopenta-amminecobalt(III) ion and glycine in acidic media have been studied spectrophotometrically at different glycine concentration and different pH in the range of 50–70°C. The ΔH≠ and ΔSz≠ values are 27.6 kcal mole^?1 and +5.2 e. u. respectively, and increase in ionic strength causes only a slight acceleration of the rate. The results are consistent with a mechanism involving outer-sphere association between the aquopenta-amminecobalt(III) complex and glycine, followed by its transformation into the product by an essentially dissociative process in which rupture of the Co(III)? OH₂ bond is primarily important in the transition state (S_N1IP mechanism).     

Gas-phase ion chemistry of GeH(4)/B(2)H(6) mixtures

The gas phase ion-molecule reactions in positively and negatively ionized germane/diborane mixtures have been studied by ion trap mass spectrometry. Reaction sequences and rate constants for the most interesting processes have been determined. In positive ionization, formation of Ge-B bonds exclusively occurs through condensation reactions of B(n)H(m)(+) ions with germane, followed by H(2) or BH(3) loss. No reactions of ions from germane with B(2)H(6) were observed under the experimental conditions used here. In negative ionization, the Ge(n)H(m)(-) (n = 1, 2) ion families react with diborane to yield the Ge(n)B(p)H(q)(-) (p = 1, 2) ions, again via dehydrogenation and BH(3) loss, while diborane anions proved to be unreactive. In both positive and negative ionization, Ge-B ions reach appreciable abundances. The present results afford fundamental information about the intrinsic reactivity of gas-phase ions and provide valuable indications about the first nucleation steps ultimately leading to amorphous Ge and B-doped semiconductor materials by chemical vapor deposition methods.     

Hydration properties of aqueous Pb(II) ion

Using density functional theory and polarized continuum models, we have determined the most probable coordination number and structure of the first hydration shell of aqueous Pb(II). The geometries and hydration free energies of Pb(H2O)(1-9)(2+) were examined and benchmarked against experimental values. The free energies of hydration of Pb(H2O)(6-8)(2+) were found to match the experimental value within 10 kcal/mol. Moreover, based upon our thermochemical results for single water addition, primary hydration numbers of 6, 7, and 8 are all thermally accessible at STP. Use of a small-core 60 electron effective core potential (ECP) with the aug-cc-pvdz-PP basis on Pb resulted in structures that are significantly less hemidirected than predicted when using the large-core 78 electron ECP and the lanl2DZ basis on the metal. Our results imply that the hemi- to holo-directed transition in Pb(II)-water complexes is driven by coordination number and not hybridization of the 6s lone-pair orbital or enhanced covalent bonding in the Pb-OH2 bond. In addition to basis set effects, the influence of different solvation models on hydration reactions has further been examined so as to determine the relative accuracy of the calculated hydration thermochemistry.     

Effects of pipette modulation and imaging distances on ion currents measured with scanning ion conductance microscopy (SICM)

Local conductance variations can be estimated by measuring ion current magnitudes with scanning ion conductance microscopy (SICM). Factors which influence image quality and quantitation of ion currents measured with SICM have been evaluated. Specifically, effects of probe-sample separation and pipette modulation have been systematically studied for the case of imaging conductance variations at pores in a polymer membrane under transmembrane concentration gradients. The influence of probe-sample separation on ion current images was evaluated using distance-modulated (ac) feedback. Approach curves obtained using non-modulated (dc) feedback were also recorded to determine the relative influence of pipette-generated convection by comparison of ion currents measured with both ac and dc feedback modes. To better interpret results obtained, comparison to a model based on a disk-shaped geometry for nanopores in the membrane, as well as relevant position-dependent parameters of the experiment is described. These results advance our current understanding of conductance measurements with SICM.     

Sensitized spectrophotometric determination of Cr(III) ion for speciation of chromium ion in surfactant media using alpha-benzoin oxime

A simple and accurate micellanized spectrophotometric method for determination of trace amounts of Cr(III) ion in tab and top water and a synthetic mixture has been described. The micellar method is based on effect of organized molecular assemblies such as micelles in spectrophotometric measurement due to their effect on the systems of interest. The ability of micellar system in solubilizing of sparingly soluble ligand or complexes has been used for increasing figures of merit of an analytical method. Due to solubility increasing in aqueous media requirement for a primary extraction can be eliminated. Using the alpha-benzoin oxime (alpha-BO) spectrophotometric determination of Cr(III) ion has been performed and results are compared. The spectrophotometric determination of Cr(III) ion using alpha-BO in the presence of non-ionic surfactant Triton X-100 has been performed. The influence of type and amount of surfactant, pH, complexation time and amount of ligand were examined. Finally, the repeatability, accuracy and the effect of interfering ions on the determination of Cr(III) ion was evaluated. The proposed methods successfully with recovery yield of almost 100% have been applied to the rapid and simple determination of Cr(III) ion in the real samples. There is a good agreement between methods and atomic absorption spectrometry. The Beers law is obeyed over the concentration range of 0.1-13.7 microg mL(-1) for micellar media. The detection limit is 0.8 ng mL(-1). The molar absorptivity of complex is 5350 L mol(-1) cm(-1).     

Some ion exchange properties of amorphous titanium (IV) phosphate

An amorphous titanium (IV) phosphate exchanger has been synthesised and characterized through elemental analysis, infrared, and thermogravimetric techniques. Divalent cations Mn, Co, Ni, Cu, Zn, Cd, Hg and Pb in bidistilled water have been exchanged with the proton of the exchanger matrix using a batch method. From these results the thermodynamic selectivity constants and distribution coefficients were calculated, whose values indicate a high selectivity for Pb and Hg. Both cations were successfully separated from a mixture containing all cations studied through column separation experiments.     

Electron transfer reaction of oxo(salen)chromium(V) ion with anilines

The kinetics of oxidation of 16 meta-, ortho-, and para-substituted anilines with nine oxo(salen)chromium(V) ions have been studied by spectrophotometric, ESIMS, and EPR techniques. During the course of the reaction, two new peaks with lambda(max) at 470 and 730 nm appear in the absorption spectrum, and these peaks are due to the formation of emeraldine forms of oligomers of aniline supported by the ESIMS peaks with m/z values 274 and 365 (for the trimer and tetramer of aniline). The rate of the reaction is highly sensitive to the change of substituents in the aryl moiety of aniline and in the salen ligand of chromium(V) complexes. Application of the Hammett equation to analyze kinetic data yields a rho value of -3.8 for the substituent variation in aniline and +2.2 for the substituent variation in the salen ligand of the metal complex. On the basis of the spectral, kinetic, and product analysis studies, a mechanism involving an electron transfer from the nitrogen of aniline to the metal complex in the rate controlling step has been proposed. The Marcus equation has been successfully applied to this system, and the calculated values are compliant with the measured values.     

Reaction of poly(vinyl alcohol) with pentavalent vanadium ion

The reaction of poly(vinyl alcohol) (PVAL) with V(V), i.e., pentavalent vanadium ion, was studied in aqueous H₂SO₄ medium. The viscosity change of reaction mixture with time showed a peculiar feature owing to formation of labile complex between V(V) and PVAL and the subsequent decomposition of the complex. On the other hand, the change of viscosity disappeared when NaOH was added during the reaction to neutralize H₂SO₄ in the reaction mixture. Under a suitable condition, the reaction mixture set to a gel as a result of complex formation. It appeared that reactive sites in PVAL responsive to complexing with V(V) were 1,2-glycol unit and 1,2-ketoalcohol unit resulting from the oxidation of 1,2-glycol by V(V). The rate of oxidation was increased with increasing H₂SO₄ concentration. The main-chain scission of PVAL took place to an insignificant extent, unless the reaction condition was severe. Based on the results obtained a reaction mechanism has been proposed.     

A PVC-membrane bulk optode for gallium(III) ion determination

An optical probe responsive to gallium(III) ion has been developed. The gallium sensing system was prepared by incorporating 4-(p-nitrophenyl azo)-pyrocatechol (NAP) as ionophore in a plasticized PVC membrane containing tributylphosphate (TBP) as plasticizer. The sensing membrane in contact with gallium ion at pH 3.5, changes color from yellow-brown to pink-brown. Under optimum conditions, the proposed membrane displayed a linear range of 5-83 μM with a limit of detection of 4 μM. The response time of the membrane was within 10-15 min depending on the concentration of Ga³⁺ ions. The selectivity of the probe towards gallium determination was found to be very good. Experimental results showed that the probe could be used as an effective tool in analyzing the gallium content of water samples.     

Experimental and quantum-chemical studies of histamine complexes with copper(II) ion

Histamine-copper(II) complexes have been studied using experimental methods and density functional theory. Preferred coordination centres and possible structures of aqua complexes have been determined. On the basis of equilibrium and spectroscopic studies the endocyclic nitrogen atom has been confirmed to as a coordinating centre in the CuH(Hist), Cu(Hist) and Cu(Hist)(OH) complexes. The involvement of the amino group linked to the aliphatic chain in the Cu(II) coordination has been additionally proven by the detection of the Cu(Hist) and Cu(Hist)(OH) complexes. The computed stabilisation energies demonstrate that the Cu(H₂O)₄(Hist) and Cu(OH)(Hist)(H₂O)₃ chelates as well as the CuH(H₂O)₅(Hist) compounds are the most energetically stable in the media studied. The most stable conformers of the neutral form of the histamine molecule are in the Cu(Hist) and Cu(Hist)(OH) species. These complexes have a gauche structure stabilized by an intramolecular hydrogen bond. The electronic Jahn-Teller effect is mainly responsible for the tetragonal distortion of the octahedral MHL-(H₂O)₅ complex. Strong electrostatic interactions and polarisation effects contribute to the enhanced stability for all of the complexes studied. The results of the computations confirm that histamine is effective in coordinating to the Cu(II) ions in biological systems. The theoretical results fully confirm the coordination modes proposed in the experiment and predict the most reliable geometry and energetic stability of the aqua complexes.     

Oxidation of ferrocenes by copper(II) in aqueous acetonitrile: nitrate and chloride ion effects

The effect of nitrate and chloride ion on the rate of oxidation of ferrocene (Fc) and 1,1'-dimethylferrocene (DmFc) by Cu(II) has been studied in 95% and 80% acetonitrile/water solutions. The complex formation constants for Cu(II) with the same anions in the same media have been determined by spectrophotometry. Nitrate ion mildly inhibits the reaction, while chloride ion substantially increases the rate. The results have been analyzed in terms of the Marcus theory, and it is concluded that complexation increases the rate of self-exchange between the CuII(X)n and CuI(X)n species. In the case of nitrate, the latter effect is compensated for by a less favorable overall equilibrium constant, which results in mild inhibition.     

A new PVC matrix membrane sensor for determination of praseodymium(III) ion based on bis(salicylaldehyde)thiocarbohydrazone as an ion carrier

The sufficient amounts of bis(salicylaldehyde) thiocarbohydrazone (STCH) as a lipophilic selective element (3%, w/w), sodium nitrobenzene (NB) as a plasticizer (64%, w/w), tetraphenyl borate (NaTPB) as an anionic additive (3%, w/w), and poly vinyl chloride (PVC) as a polymeric matrix (30%, w/w) was employed to form a PVC membrane of a new Pr³⁺ ions selective sensor to apply as an indicator electrode in analytical applications. The best electrode response was observed in the slope (19.5 ± 0.7 mV per decade) over a wide concentrations from lower (1.0 × 10^?6 mol L^–1) to higher (1.0 × 10^?2 mol L^–1) of Pr³⁺ ion solution with a detection limit of 8.5 × 10^–7 mol L^–1. This electrode showed the fast response time about 10 second for praseodymium ion concentration range of 1.0 × 10^–6 to 1.0 × 10^–2 mol L^–1, in the pH range of 2.3–7.9. The matched potential method was applied to study the selectivity of electrode toward Pr³⁺ ions in comparison with many common cations. The results showed the negligible disturbance of all other cations on the proposed praseodymium(III) electrode. The making sensor has been employed successfully as an indicator electrode in the potentiometric titration of praseodymium(III) solution with EDTA at pH 6.0. Moreover the applicability of the sensor was studied in determination of Pr³⁺ ion in mixtures of different ions.     

Complexation and determination of palladium (II) ion with para-Cl-phenylazo-R-acid spectrophotometrically

The complexation of para-Cl-phenylazo-R-acid azo dye with Pd(II) has been studied spectrophotometrically. Protonation constant (pK(a)) of the ligand has been calculated and the stability conditional constants of para-Cl-phenylazo-R-acid ligand with palladium ion has been determined at a constant temperature (25.0 degrees C), where the molar ratio of this complex is 1:1 (metal:ligand) with logbeta(1)=3.75, and 1:2 with logbeta(2)=8.55. Solid complex of para-Cl-phenylazo-R-acid has been prepared and characterized on the basis of elemental analysis and FTIR spectral data. A procedure for the spectrophotometric determination of Pd(II) using para-Cl-phenylazo-R-acid as a new azo chromophore is proposed where it is rapid, sensitive and highly specific. Beer's law was obeyed in the range 0.50-10.00 ppm at pH 5.0-6.0 to form a violet-red complex (epsilon=7.7 x 10(4) l(-1) mol(-1) cm(-1) at lambda(max)=560 nm). Metal ions such as Cu(II), Cr(III), La(III), Yb(III), Y(III), and Rh(III) interfere with the complex. Ammonium salt of trimellitic acid is used to precipitate some of the interfering ions and a scheme for separation of Pd(II) from a synthetic mixture similar in composition to platinum ore or deposit was made.     

Titanium(IV) tungstosilicate and titanium(IV) tungstophosphate: two new inorganic ion exchangers

Crystalline phases of Ti(IV) tungstosilicate and Ti(IV) tungstophosphate have been synthesised. The ion-exchange capacities of Ti(IV) tungstosilicate and Ti(IV) tungstophosphate have been reported as 0.44 and 0.80 mequiv./g, respectively. Both materials show monofunctional ion-exchange characteristic and are stable in 0.1 M solutions of HNO3, HCl, H2SO4 and acetone and benzene. Ti(IV) tungstosilicate is found to be more stable thermally than Ti(IV) tungstophosphate (loss in ion-exchange capacity was found as 58 and 80%, respectively for samples heated at 200 degrees C). The Kd values for heavy metals such as Pb, Hg, Cd, Sb, Co, Zn, Ni, Fe, Cr etc. have been reported in demineralised water and two surfactant media by batch processes. Cr3+, Fe3+ and Sn4+ are totally adsorbed on both the materials in demineralised water while a decrease in Kd value with increase in concentration of two surfactants is reported. On the basis of Kd values for metal ions, thirteen binary separations and five ternary separations on Ti(IV) tungstosilicate and thirteen different binary separations and four different ternary separations on Ti(IV) tungstophosphate have been achieved. Separation of methylamine from ethylamine has been done by GC on a column packed with Ti(IV) tungstophosphate.     

Single ion and dimerization studies of the Al(III) ion in aqueous solution

Aqueous trivalent aluminum (Al) ions and their oligomers play important roles in diverse areas, such as environmental sciences and medicine. The geometries of octahedral Al(H(2)O)(6)(3+) and tetrahedral Al(OH)(4)(-) species have been studied extensively. However, structures of intermediate hydrolysis products of the Al(III) ion, such as the penta-coordinated Al(OH)(2+) species, which exists at pH values ranging from 3.0 to 4.3, and their mode of formation have been poorly understood. Here, we present that a trigonal bipyramidal Al(OH)(H(2)O)(4)(2+) structure is formed in aqueous solution and how this monomeric species dimerizes to a dinuclear [(H(2)O)(4)Al(OH)(2)Al(H(2)O)(4)](4+) complex in aqueous solution. The Gibbs free energy change calculations indicate that the formation of the dinuclear complex is preferred over the existence of two single trigonal bipyramidal Al(OH)(H(2)O)(4)(2+) species in aqueous solution. This study captures the solution dynamics and proton transfer in the oligomerization reactions of penta-coordinated Al(OH)(2+) species in aqueous solution.     

Kinetics of hydrazine exchange in the pentacyanohydrazineferrate(II) ion

Summary Rate constants and activation parameters for the release of hydrazine (both neutral and protonated) coordinated to the Fe(CN) ₅ ^3– moiety are reported, together with the corresponding stability constants. The rates of formation of the complexes have been evaluated indirectly. The results confirm the general dissociative mechanism for pentacyano(ligand) ferrate(II) ions but some significant differences are found on comparing the data with those from several coordinated diamines. The acidity of complexed N₂H ₅ ⁺ is enhanced byca. two orders of magnitude with respect to free N₂H ₅ ⁺ , its rate of release being greater than that of N₂H₄ by a factor of 31. A solvation controlled model for the dissociation of [Fe(CN)₅L]^n– is shown to be operative in its general features, although specific charge effects are shown to influence the rate of both the dissociation and the formation reactions.     

Physico-chemical transformations in swift heavy ion modified poly(ethyleneterephthalate)

Thin films of poly(ethyleneterephthalate) (PET) were exposed to different radiation dose brought about by 80 MeV carbon and 98 MeV silicon ion beam. The UV-vis absorption studies reveal that there is decrease in optical band gap energy to the extent of ∼29.3 and 42.1%. The X-ray diffraction analyses have shown that crystallite size decreased by ∼18.6 and 52.6%, indicating amorphization of PET. The colour of PET films change from colourless to light yellowish followed by light brown as radiation dose is increased. The colour formation has been ascribed to an increase in conjugation in the carbon chain. In the case of PET irradiated with carbon ion, the electrical conductivity increased with frequency beyond a threshold value of 1 kHz. The increase in conductivity of PET films on irradiation is due to formation of defects and carbon clusters as a result of polymer chain scission. The thermal study further confirmed the increase in amorphous nature with increase in radiation dose. The results indicate that radiation dose brings about significant physicochemical transformations in PET.     

Pyridine based thorium(IV) phosphate hybrid fibrous ion exchanger

Pyridine based thorium(IV) phosphate (PyThP) has been synthesized by drop-wise addition of the thorium(IV) nitrate with constant stirring into a mixture of pyridine and phosphoric acid. This material has been characterized using X-ray, IR spectra, TG, DTG and SEM studies in addition to its ion exchange capacity, elution and pH titrations. The material has been found amorphous and fibrous in nature on the basis of X-ray diffraction and SEM studies. TG has revealed the changes incurred in the material on thermal treatment and IR spectral studies have shown the presence of various groups in its structure.     

Research on the chelation between quercetin and Cr(III) ion by Density Functional Theory (DFT) method

In order to locate the exact chelation site, the chelation between quercetin and Cr(III) ion is studied using the theoretical methods. Many different potential complexes, formed with natural and deprotonated quercetin chelating bare and hydrated Cr(III) ion, respectively, are studied by using Density Functional Theory method. Both total and binding energies are calculated. The results from the studies indicate that Cr(III) ion is affine in forming a complex with quercetin at the 5-hydroxy-4-keto site and that deprotonated quercetin has stronger chelating power than natural quercetin. Apart from the theoretical studies, the experiments are performed to modify the theoretical conclusions. Meanwhile, quercetin–Cr(III) complex has been synthesized, and the chelation site is analyzed using IR spectroscopy and UV/vis spectrum. The experimental results are found to have the same conclusions as those by theoretical studies.     

Li(+) ion conductivity in rock salt-structured nickel-doped Li(3)NbO(4)

Two mechanisms of doping Li(3)NbO(4), which has an ordered, rock salt superstructure, have been established. In the "stoichiometric mechanism", the overall cation-to-anion ratio is maintained at 1:1 by means of the substitution 3Li(+) + Nb(5+) --> 4Ni(2+). In the "vacancy mechanism", Li(+) ion vacancies are created by means of the substitution 2Li(+) --> Ni(2+). Solid solution ranges have been determined for both mechanisms and a partial phase diagram constructed for the stoichiometric join. On the vacancy join, the substitution mechanism has been confirmed by powder neutron diffraction; associated with lithium vacancy creation, a dramatic increase in Li(+) ion conductivity occurs with increasing Ni content, reaching a value of 5 x 10(-4) Omega(-1) cm(-1) at 300 degrees C for composition x= 0.1 in the formula Li(3-2x)Ni(x)NbO(4). This is the first example of high Li(+) ion conductivity in complex oxides with rock salt-related structures.