Trends in Fourier transform infrared spectroscopic imaging

Fourier transform infrared (FTIR) spectroscopic imaging is a relatively new method that has received great attention as a new field of analytical chemistry. The greatest benefit of this technique lies in the high molecular sensitivity combined with a spatial resolution down to a few micrometers. Another advantage is the ability to probe samples under native conditions, which allows new insights into samples without the need for fixation, stains, or an additional marker. Advances in instrumentation have made FTIR spectroscopic imaging the tool of choice for an increasing number of applications. The main applications are in the bioanalytical chemistry of cells and tissue, polymers, and recently as well as in homeland security. This report gives a short overview of current developments and recent applications. Figure FTIR image of a polymer blend reveals the chemical composition. Online Abstract Figure (365 KB).     

Recent advances in capillary electrophoretic analysis of individual cells

Because variability exists within populations of cells, single-cell analysis has become increasingly important for probing complex cellular environments. Capillary electrophoresis (CE) is an excellent technique for identifying and quantifying the contents of single cells owing to its small volume requirements and fast, efficient separations with highly sensitive detection. Recent progress in both whole-cell and subcellular sampling has allowed researchers to study cellular function in the areas of neuroscience, oncology, enzymology, immunology, and gene expression.      

Determination of the titanium content of human transferrin by inductively-coupled plasma-atomic-emission spectroscopy

We report a simple method that combines dialysis, as a purification method, with the multielement capability of ICP to determine the titanium-to-transferrin mole ratio at physiological pH, under buffer conditions. The method, by means of which titanium and transferrin are determined simultaneously, enabled us to assess the binding capacities of different titanocene complexes. Figure Titanocene dichloride     

Nuclear magnetic resonance of mass-limited samples using small RF coils

Figure Schematic diagram of a typical arrangement used for hyphenating chemical microseparations (e.g. capillary HPLC, CE, or CEC) with microcoil NMR detection     

Application of anodized aluminum in fluorescence detection of biological species

Thin nanoporous alumina obtained by anodization of aluminum films offers promising advantages for application in fluorescence-based biological sensors including convenient preparation, increased density of binding sites, and improved collection efficiency of fluorescence. These advantages are illustrated in the detection of streptavidin using biotin covalently bound to the surface of alumina nanopores. Fluorescence intensity enhancement as high as 7 times is observed in nanopores in comparison to flat glass surface.      

Chemical analysis of acoustically levitated drops by Raman spectroscopy

An experimental apparatus combining Raman spectroscopy with acoustic levitation, Raman acoustic levitation spectroscopy (RALS), is investigated in the field of physical and chemical analytics. Whereas acoustic levitation enables the contactless handling of microsized samples, Raman spectroscopy offers the advantage of a noninvasive method without complex sample preparation. After carrying out some systematic tests to probe the sensitivity of the technique to drop size, shape, and position, RALS has been successfully applied in monitoring sample dilution and preconcentration, evaporation, crystallization, an acid–base reaction, and analytes in a surface-enhanced Raman spectroscopy colloidal suspension. Figure We have systematically investigated the analytical potential of Raman spectroscopy of samples in acoustically levitated drops.     

Colorimetric detection of immunoglobulin G by use of functionalized gold nanoparticles on polyethylenimine film

A method based on use of functionalized gold nanoparticles on polyethylenimine film has been developed for colorimetric detection of immunoglobulin G (IgG). The immunogold nanoparticles were immobilized on quartz slides by recognition between antibody and antigen, with the antigen chemically adsorbed on the polyethylenimine film. By measurement of the UV–visible spectra of the immobilized immunogold, detection of h-IgG was achieved. The detection limit for h-IgG by use of this method can be as low as 0.01 μg mL⁻¹. This method is quite promising for numerous applications in immunoassay. Figure     

Elucidation of n-butyl benzyl phthalate biodegradation using high-performance liquid chromatography and gas chromatography–mass spectrometry

n-Butyl benzyl phthalate (BBP) is an endocrine-disrupting chemical. A bacterium species capable of using BBP as the sole source of carbon and energy was isolated from mangrove sediment. Effects of BBP concentration, pH, temperature, and salinity on BBP biodegradation were studied. The optimum pH, temperature, and salinity for the BBP biodegradation were 7.0, 37°C, and 15 g L⁻¹, respectively. BBP was completely degraded within 6 days under optimum conditions, and the biodegradation of BBP could be fitted to a first-order kinetic model. The major metabolites of BBP biodegradation were identified as mono-butyl phthalate, mono-benzyl phthalate, phthalic acid, and benzoic acid by using high-performance liquid chromatography and gas chromatography–mass spectrometry. A preliminary metabolic pathway was proposed for the biodegradation of BBP.      

Sensor technology and its application in environmental analysis

Environmental analysis is one of the fundamental applications of chemical sensors. In this review we describe different sensor systems for the gas and liquid phases that have been tested either with real-life samples or in the field during the last five years. Most field sensors rely either on electrochemical or optical transducers. In the gas phase, systems have been proposed for analysis of oxides of nitrogen, carbon, and sulfur in air, and volatile organic compounds. In the liquid phase, most detection systems used for real-life samples detect heavy-metal ions or organic contamination, for example pesticides, organic solvents and polycyclic aromatic hydrocarbons. Figure Chemical sensors for real-life environmental applications Dedicated to Professor Ulrich Nickel on the occasion of his 65th birthday.     

Arsine and selenium hydride trapping in a novel quartz device for atomic-absorption spectrometry

A novel quartz device has been designed to trap arsine and selenium hydride and subsequently to volatilize the collected analyte and atomize it for atomic-absorption spectrometric detection. The device is actually the multiple microflame quartz-tube atomizer (multiatomizer) with inlet arm modified to serve as the trap and to accommodate the oxygen-delivery capillary used to combust hydrogen during the trapping step. The effect of relevant experimental conditions (trap temperature during trapping and hydrogen flow rate and trap temperature during volatilization) on collection and volatilization efficiency was investigated. Under the optimum conditions collection and volatilization efficiency for arsenic and selenium were 50 and 70%, respectively.      

Multiple-scattering extended X-ray absorption fine structure analysis of nanostructured iron(III) oxide in the pore system of mesoporous carbon CMK-1

This work is devoted to the EXAFS analysis of nanostructured iron(III) oxide synthesized inside the pore system of mesoporous carbon CMK-1. A detailed study of the recording, preparation and evaluation of data recorded in fluorescence mode at the iron K-edge with and without multiple scattering is shown. The results obtained show that the local structure of Fe³⁺ inside nanostructured iron(III) oxide is different to that of the bulk material. Due to the small particle size, data analysis is much more difficult and data preparation more complex. Incorporating multiple scattering paths in the Fourier transforms and back-transforms during data evaluation gives structural insights that cannot be obtained using other spectroscopic methods, and this technique was used to draw conclusions about the first four coordination spheres of the nanostructured iron(III) oxide.      

New near-infrared LIBS detection technique for sulfur

Sulfur has been detected in a spectral window (around 868 nm) previously unexplored by laser-induced breakdown spectrometry (LIBS), using an ablation laser with an ultraviolet wavelength, a gated detector, and inert ambient gas at a low, controlled pressure. This spectral window enables new-generation gated iCCD cameras to be used, which have adequate quantum efficiencies up to 900 nm. Application of our technique can substantially improve signal strength and thus extends the ability of LIBS to detect many nonmetallic elements.      

Modì: a new mobile instrument for in situ double-pulse LIBS analysis

Laser-induced breakdown spectroscopy (LIBS) is a promising technique for in situ elemental analysis. A new mobile instrument for LIBS analysis, developed in a collaboration between Marwan Technology s.r.l. and the Applied Laser Spectroscopy Laboratory in Pisa, is presented, and some applications of it and results from it are outlined. The innovative experimental set-up, based on the use of two suitably retarded laser pulses and a standardless analysis procedure, which overcomes problems related to matrix effects, greatly improves the potential of this technique for accurate quantitative analysis.      

On-line NMR detection of microgram quantities of heparin-derived oligosaccharides and their structure elucidation by microcoil NMR

The isolation and purification of sufficient quantities of heparin-derived oligosaccharides for characterization by NMR is a tedious and time-consuming process. In addition, the structural complexity and microheterogeneity of heparin makes its characterization a challenging task. The improved mass-sensitivity of microcoil NMR probe technology makes this technique well suited for characterization of mass-limited heparin-derived oligosaccharides. Although microcoil probes have poorer concentration sensitivity than conventional NMR probes, this limitation can be overcome by coupling capillary isotachophoresis (cITP) with on-line microcoil NMR detection (cITP-NMR). Strategies to improve the sensitivity of on-line NMR detection through changes in probe design and in the cITP-NMR experimental protocol are discussed. These improvements in sensitivity allow acquisition of cITP-NMR survey spectra facilitating tentative identification of unknown oligosaccharides. Complete structure elucidation for microgram quantities of the purified material can be carried out through acquisition of 2D NMR spectra using a CapNMR microcoil probe. Survey NMR spectrum obtained by cITP-NMR using a second-generation probe (the microcoil of which is shown) facilitates tentative identification of unknown oligosaccharides (e.g., the heparin-derived tetrasaccharide illustrated)     

Novel gel-based rapid test for non-instrumental detection of ochratoxin A in beer

A rapid easy-to-use immunoassay was optimised for the non-instrumental detection of ochratoxin A (OTA) in beer. The analytical method involves preconcentration on the immunoaffinity layer inside a column followed by direct competitive ELISA detection in the same layer. The visual cut-off value, i.e. the lowest OTA concentration resulting in no colour development, was 0.2 μg L^-1. Assay validation was performed using samples spiked with OTA. Thirty-seven naturally contaminated samples were screened with the gel-based method developed and no false-negative results were obtained. The method described offers a simple, rapid and cost-effective screening tool, thus contributing to better health protection of consumers. Figure Gel-based immunoassay of spiked beer samples.     

Detection of molecular processes in the intact retina by ATR-FTIR spectromicroscopy

We used Fourier transform infrared spectromicroscopy in the attenuated total reflection configuration to study biochemical events associated with the response to light of an intact retina. We show that the technique is suitable for the detection in real time of molecular processes occurring in rod outer segments induced by light absorption. Two-dimensional correlation analysis was applied to the identification and interpretation of specific spectral changes associated to the evolution of the system. The technique allows us to observe an extensive protein translocation, which we interpret as arising from the release of transducin from the disk membrane and its redistribution from the outer segment towards the inner segment of rod cells. These results are in full agreement with our current understanding of retinal physiology and validate the technique as a useful tool for the study of complex molecular processes in intact tissue. Figure Spectral changes in the mid infrared region following exposure of an intact retina to light     

A liquid chromatography–fluorimetric method for the in vitro estimation of the skin penetration of disodium phenyldibenzimidazole tetrasulfonate from sunscreen formulations through human skin

Disodium phenyldibenzimidazole tetrasulfonate (PDT) is a new organic UV filter with hydrophilic properties used in modern sunscreen spray formulations. The aim of this work was to develop and validate an analytical method that can be used to study skin absorption of PDT from sunscreens. Results obtained in vitro for human skin showed a low level of absorption. The proposed in vitro method employs a diffusion cell. Sunscreen lotion was applied onto pretreated human skin, which was then placed in the cell. PDT was collected in a receptor liquid, the surface of which was in contact with the skin. The solutions obtained were diluted appropriately and analyzed by liquid chromatography without any interference. The analytical features of chromatographic determination with fluorimetic detection were suited to this analytical problem, since this method gave a limit of detection of 1 ng ml⁻¹. Phenol red (PR) was used as a marker to check the skin integrity, and a sensitive method based on sequential injection on-line solid-phase extraction coupled with spectrophotometric detection was developed for determining this marker in the receptor liquid in order to screen the cells.      

Rapid analysis of native neomycin components on a portable capillary electrophoresis system with potential gradient detection

A simple method based on capillary electrophoresis with potential gradient detection was developed to separate and detect neomycin components within 4 min without a derivatization step. Satisfactory separation and good repeatability were obtained using a separation buffer composed of 1 mM ammonium citrate (pH 3.5). The linearity of the method ranged from 10 to 1000 ppm with a limit of detection for neomycin B of about 7 ppm. After a simple dilution and filtering pretreatment step, neomycin components in three real samples were successfully analyzed without any major interference. Due to its simplicity and reliability, this method could provide an excellent alternative to the assays currently listed in U.S. and European Pharmacopoeia. The experiments were performed on a portable capillary electrophoresis system and, hence, the method can be readily applied to field analysis and point-of-care testing. Figure Photo of portable CE-P2-PGD system     

Analysis of biosensors by chemically specific optical techniques. Chemiluminescence-imaging and infrared spectroscopic mapping ellipsometry

The standard methods currently used to read out microarrays are fluorescent and chemiluminesent imaging techniques. These methods require labeling of a component with a marker and, usually, only the concentration of the marker molecule is detected. A label-free imaging method that also enables quantitative spectroscopic analysis of the composition and component interaction would be of great advantage. In this article it is shown for the first time that IR mapping ellipsometry enables label-free imaging of a biochip before and after incubation with peptide solution. The measurements prove that IR ellipsometry is a sensitive tool for laterally resolved identification of the different materials and determination of the composition of a biochip. The lateral resolution required was achieved by using radiation from an infrared synchrotron beamline.