Chelating ion-exchangers containing n-substituted hydroxylamine functional groups: Part 6. Sorption and separation of gold and silver by a polyhydroxamic acid

The sorption and desorption characteristics of gold and silver on a polyhydroxamic acid chelating resin are described. Gold is quantitatively sorbed from 0.5 M nitric acid or neutral solutions, and readily eluted with 0.5% ($\text{w}\text{v}$) potassium cyanide solution. Silver is removed from 0.05 M nitric acid or neutral solutions, and can be eluted with the cyanide solution or with 0.5 M nitric acid. Gold can be quantitatively separated from copper, iron and silver; gold and silver are sorbed from dilute cyanide solutions. Tests with river water and other eluting systems are reported.     

Donnan dialysis of copper, gold and silver cyanides with various anion exchange membranes

Donnan dialysis is an ion exchange membrane process that can be used for the purification and concentration of diluted solutions. In this work, the behaviour of gold, silver and copper in cyanide medium is examined. Flux of cyanide complexes and corresponding free cyanide are determined using five commercial anion exchanger membranes (AMV, ACS, RAI 5035, ADP and ADS). The results show that the rate transfer depends upon the nature of the anion exchanger membrane. It is observed that the species number in the feed solution influences the transfer selectivity of metal ion complex against free cyanide Thus, gold which forms only one stable species with cyanides is transferred faster through an ACS membrane than copper which forms three species. However, this result is not verified when an ADS membrane is used. A model of the complex transfer through anion exchange membranes based on Donnan dialysis is proposed. A three compartment Donnan dialysis is performed to improve the separation between the studied metals. Decyanidation is also examined and separation factors are calculated. It is shown that Donnan dialysis can be an efficient technique for the separation of cyanides complexes of copper, gold and silver when parameters such as anion exchange membrane and the number of compartments are optimised. An advantage of this technique is also the possibility of recycling all reactants with a good impact on the environment.     

Metal ion capillary zone electrophoresis with direct UV detection: Separation of metal cyanide complexes

Mixtures of cyanide complexes of iron(III), copper(I), iron(II), nickel(II), chromium(III), mercury(II), palladium(II), silver(I), cadmium(II), zinc(II), cobalt(II), and cobalt(III) have been separated by capillary zone electrophoresis using a fused silica capillary and 20 mM phosphate buffers containing 1–2 mM sodium cyanide. The complexes were detected by direct UV absorpticn at 214 nm; detection limits are in the mid ppb range for all metals except cadmium and zinc. The different detectability of various metal cyanide complexes enables the application of the method to the analysis of complex matrices such as cyanide plating bath solutions.     

含硫氮螯合树脂对金、银及某些贱金属氰化物吸附性能的研究

用ＩＣＰ－ＡＥＳ研究了含硫氮螯合树脂对碱性氰化溶液中金、银、铜、铁、锌等金属离子的吸附行为。结果表明,该树脂除定量吸附金、银的氰化物外,也吸附铜、锌、铁的氰化物;吸附在树脂上的银及其它贱金属离子可以用２％ＮａＣＮ定量解吸,用硫脲－硫酸溶液可顺利地将金从树脂上洗脱下来,由此可实现金与银等元素的分离。树脂重复使用性能良好。对该树脂吸附金属氰化物的机理进行了初步探讨。     

Improved separation of cadmium-109 from silver cyclotron targets by anion-exchange chromatography in nitric acid—hydrobromic acid mixtures

A method is presented for improved separation of ¹⁰⁹Cd from silver cyclotron targets. After dissolution of the target material in nitric acid and removal of silver by precipitation with copper metal, at pH 5, the cadmium is separated from zinc, copper and other elements by anion exchange chromatography. The solution in 0.5 M nitric acid plus 0.1 M hydrobromic acid is percolated through a column containing 4 ml of AG1-X8 anion-exchange resin (100–200 mesh), equilibrated with the same acid mixture. Zinc, copper(II) and other elements are eluted with 50 ml of this mixture. Cadmium is retained and finally eluted with 50 ml of 3 M nitric acid. The cadmium is retained much more strongly from the hydrobromic acid mixture than from the 0.02 M hydrochloric acid used for such separations previously; the presence of the strongly absorbed nitrate anion in fairly high concentration completely eliminates the tailing of zinc observed in 0.02 M hydrochloric acid. A typical elution curve and results of quantitative separations are presented.     

Preconcentration of trace metal ions by combined complexation-anion exchange : Part 2. Cobalt,zinc, cadmium and lead with 8-hydroxyquinoline-5-sulfonic acid [1]

The ligand, 8-hydroxyquinoline-5-sulfonic acid, forms anionic complexes with cobalt(II), zinc(II), cadmium(II), and lead(II), each resulting complex showing a high affinity for anion-exchange resins. The effect of pH, ligand/metal ratio, volume, and concentration on percent retention of the anionic complexes by an anion-exchange resin are reported. At optimum conditions, all four metals are quantitatively retained by the column. Zinc, cadmium and lead(II) ions are completely eluted with 11 ml or less of 2 M HN0₃; cobalt(II) is totally removed by 12 M HCl and 2 M HNO₃. Concentration enhancements of 100-fold are easily achieved. All four anionic complexes can be left on the column for 7 days and still be quantitatively (99%) recovered. A ligand-loaded resin column can also remove all four metals quantitatively. Distribution coefficients for the metal complexes and their ligand/metal ratios were determined by using batch methods that may also serve as the isolation procedure.     

Anion-exchange separation of metal ions in dimethyl sulphoxide-methanol-hydrochloric acid

The effect of dimethyl sulphoxide on the anion-exchange behaviour of many metals m a methanolic system with hydrochloric acid was explored. Distribution coefficients for 26 elements were determined in a mixed solvent system of dimethyl sulphoxide-methanol-0.6M hydrochloric acid, in which the proportions of dimethyl sulphoxide and methanoi were varied. Lead(II) and silver(I) complexes are soluble in this system. Interesting effects were noted for gold(III), iron(III), molybdenum(VI) and uranium(VI). As a measure of the usefulness of the systems studied, 27 anion-exchange separations of two- to four-component mixtures of metal ions were carried out, each with quantitative results.     

Polarographic determination of cyanide as nickelcyano complex in blood plasma after selective extraction in a methylene blue impregnated polyethylene column

A method for the determination of cyanide in blood plasma by differential pulse polarography (DPP) is described without a drastic acidification of the sample. Cyanide was determined as tetracyanonickelate(II)-anion complex after a microwave-acid assisted cleanup and a selective complex extraction in a polyethylene methylene blue (PE-MB) impregnated column. The cyano complex was eluted from the column with water/acetonitrile and determined by pulse-polarography at –380 mV (Ag/AgCl). The linear range of calibration was obtained from 1.2 to 9.6 μg of cyanide with r = 0.99 and RSD = 9% of 1.2 μg of cyanide. A detection limit of 40 μg L^–1 was calculated and the recoveries of cyanide from spiked samples were about 80%. This method was compared with the classical pyridine-pyrazolone method.     

Determination of Copper by Faas After Preconcentration with Lead-4-Methylpiperidinedithiocarbamate on Microcrystalline Naphthalene By Solid Phase Extraction

ABSTRACT

By using the Pb-4-methylpiperidinedithiocarbamate complex (Pb(4-MPDC)₂) on microcrystalline naphthalene in a column a method was developed for the preconcentration of copper in water samples prior to its determination by FAAS. In this method, copper in liquid phase quantitatively replaces lead on the Pb(4-MPDC)₂-naphthalene solid phase in the column, forming solid Cu(4-MPDC)₂ complex.

Afterwards, copper on Cu(4-MPDC)₂-naphthalene can be easily eluted by potassium cyanide into the aqueous phase, and the Cu is measured by FAAS. The optimum experimental parameters such as pH, flow rate, sample volume, Pb(4-MPDC)₂-naphthalene ratio, concentration of the potassium cyanide solution and effect of matrix ions for the preconcentration of copper were investigated. The obtained recovery was nearly 100 %, when the enrichment factor was 100 for standard solutions and spiked water samples. The proposed method has been employed for the determination of copper in various standard metal alloys and natural water samples.     

Surface-enhanced Raman scattering of pyridine using different metals: differences and explanation based on the selective formation of alpha-pyridyl on metal surfaces

A simple method has been developed to produce SERS-active metal surfaces. Six metal surfaces (cadmium, nickel, gold, iron, copper, and silver) have been prepared on an aluminum foil underlayment by chemical reduction and strong surface-enhanced Raman signals have been observed for pyridine species on these surfaces. This permits the direct comparison of pyridine spectra on different metal surfaces prepared by the same chemically clean method. The differences among the SER spectra of the aqueous pyridine species using different metals generally follow the trend of silver, cadmium, nickel, iron, gold, and copper, which can be explained by the selective formation of alpha-pyridyl species and the equilibria between end-on adsorbed pyridines and edge-on adsorbed alpha-pyridyl species on the different metal surfaces.     

ADSORPTION CAPACITY OF ACTIVATED CARBON FIBER FABRIC IN CYANIDE LEACHING LIQUOR OF GOLD ORES

1. INTRODUCTION Reclamation of gold in liquid of gold with activated carbon fiber (ACF) is reported. ACF possessed numerous advantages, such as high adsorption capacity, great adsorption rate and high recovery of gold. It was generally considered tha…     

Polarographic determination of cyanide as nickelcyano complex in blood plasma after selective extraction in a methylene blue impregnated polyethylene column

A method for the determination of cyanide in blood plasma by differential pulse polarography (DPP) is described without a drastic acidification of the sample. Cyanide was determined as tetracyanonickelate(II)-anion complex after a microwave-acid assisted cleanup and a selective complex extraction in a polyethylene methylene blue (PE-MB) impregnated column. The cyano complex was eluted from the column with water/acetonitrile and determined by pulse-polarography at –380 mV (Ag/AgCl). The linear range of calibration was obtained from 1.2 to 9.6 μg of cyanide with r = 0.99 and RSD = 9% of 1.2 μg of cyanide. A detection limit of 40 μg L^–1 was calculated and the recoveries of cyanide from spiked samples were about 80%. This method was compared with the classical pyridine-pyrazolone method. Received: 3 September 1997 / Revised: 21 January 1998 / Accepted: 24 January 1998     

Catalytic Activity of Cationic and Neutral Silver(I)–XPhos Complexes with Nitrogen Ligands or Tolylsulfonate for Mannich and Aza‐Diels–Alder Coupling Reactions

Cationic and neutral silver(I)–L complexes (L=Buchwald‐type biaryl phosphanes) with nitrogen co‐ligands or organosulfonate counter ions have been synthesised and characterised through their structural and spectroscopic properties. At room temperature, both cationic and neutral silver(I)–L complexes are extremely active catalysts in the promotion of the single and double A³ coupling of terminal (di)alkynes, pyrrolidine and formaldehyde. In addition, the aza‐Diels–Alder two‐ and three‐component coupling reactions of Danishefsky’s diene with an imine or amine and aldehyde are efficiently catalysed by these cationic or neutral silver(I)–L complexes. The solvent influences the catalytic performance due to limited complex solubility or solvent decomposition and reactivity. The isolation of new silver(I)–L complexes with reagents as ligands lends support to mechanistic proposals for such catalytic processes. The activity, stability and metal–distal arene interaction of these silver(I)–L catalysts have been compared with those of analogous cationic gold(I) and copper(I) complexes.     

Reversed-phase ion-interaction chromatography of Cu(I)-cyanide complexes

It has been established that during the separation of Cu(I)-cyanide complexes, the cyanide:Cu(I) molar ratio, R of the eluted complex remained constant irrespective of the R value injected onto the column, and there was considerable tailing of the unretained cyanide peak and fronting of the Cu(I)-cyanide peak in an eluent containing no cyanide. The addition of small amounts of cyanide (100 μM) to the eluent resulted in the elimination of these effects on peak shape and a significant increase in the retention of the Cu(I)-cyanide species. These results suggested that more than one Cu(I)-cyanide complex may be present in the Cu(I)-cyanide peak in an eluent containing no cyanide. Three different detection systems [Fourier transform Infrared (FTIR) and photodiode array spectrophotometry and a post-column reaction (PCR)], were used to determine changes that occurred to the Cu(I)-cyanide complexes during the separation with eluents containing from 0 to 100 μM cyanide. The FTIR approach was unsuccessful due to a lack of sensitivity. The UV spectrum of the Cu(I) peak in any one eluent remained constant, irrespective of the composition of the injected sample, but there were distinct changes in this spectrum among eluents. Similarly, the R value of the Cu(I) peak determined by PCR remained the same in any one eluent but ranged from about 2.5 to about 3.4 for these eluents. The R value was found to vary within the eluted Cu(I)-cyanide peak, especially in an eluent containing no added cyanide. These results show that more than one Cu(I)-cyanide complex is present in the eluted peak and that in the absence of cyanide in the eluent, the eluted peak consists of a mixture of the di- and tricyano complexes of Cu(I).     

Theoretical investigation of electronic structures and excitation energies of doubly N-confused porphyrin and its group 11 transition metal (III) complexes

Density functional theory is carried out to study cis-doubly N-confused porphyrin and its metal (Cu3+, Ag3+, and Au3+) complexes. The electronic structures and bonding situations of these molecules have been investigated by using the natural bond orbital analysis and the topological analysis of the electron localization function. We have studied the electronic spectra of cis-doubly N-confused porphyrin and its metal complexes with time-dependent density functional theory. The introduction of group 11 transition metals leads to blueshifts of their electronic spectra with respect to that of cis-doubly N-confused porphyrin. In particular, the absorption spectra of the copper complex show some weak Q bands that mainly arise from a combination of ligand-to-metal charge transfer and ligand-to-ligand charge transfer transitions. The relativistic time-dependent density functional theory with spin-orbit coupling calculations indicates that the effects of spin-orbit coupling on the excitation energies of the copper and silver complexes are so small that it is safe enough to neglect spin-orbit interactions for these two complexes. However, it has a significant effect on the absorption spectra of the gold complex.     

Liquid chromatographic determination of cobalt(II), copper(II) and iron(II) using 2-thiophenaldehyde-4-phenyl-3-thiosemicarbazone as derivatizing reagent

The complexing reagent 2-thiophenaldehyde-4-phenyl-3-thiosemicarbazone (TAPT) was examined for high performance liquid chromatographic (HPLC) separations of cobalt(II), copper(II) and iron(II) or cobalt(II), nickel(II), iron(II), copper(II) and mercury(II) as metal chelates on a Microsorb C-18, 5-mum column (150x4.6 mm i.d.) (Rainin Instruments Woburn, MA, USA). The complexes were eluted isocratically with methanol:acetonitrile:water containing sodium acetate and tetrabutyl ammonium bromide (TBA). UV detection was at 254 nm. The solvent extraction procedure was developed for simultaneous determination of the metals, with detection limits within 0.5-2.5 mug ml(-1) in the final solution. The method was applied for the determination of copper, cobalt and iron in pharmaceutical preparation.     

Improved separation of iron from copper and other elements by anion-exchange chromatography on a 4% cross-linked resin with high concentrations of hydrochloric acid

Iron(III) can be separated from copper(II) and many other elements by eluting these from a column of AG1-X4 anion-exchange resin with 8M hydrochloric acid, while iron(III) is retained and can be eluted with 0.1M hydrochloric acid. The separation is much better than the customary one with 3.5M hydrochloric acid. Columns containing only 8.8 ml (3 g) of resin can separate traces or up to more than 1 mmole of iron(III) from more than 1 g of copper. Mn(II), Ni, Al, Mg and Ca are quantitatively eluted together with copper(II). Lead, the alkali metals, Be, Sr, Ba, Ra, Sc, Y and the lanthanides, Ti(IV), Zr, Hf, Th and Cr(III) have not been investigated in detail but should be separated according to their known distribution coefficients. Separations are sharp and quantitative, less than 1 mug of copper remaining in the iron fraction when more than 1 g was present originally. Relevant elution curves and results of the quantitative analysis of synthetic mixtures are presented.     

TcI(CN)3(CO)3]2- and [ReI(CN)3(CO)3]2- :case studies for the binding properties of CN- and CO

The cyano carbonyl complexes [(99)Tc(CN)(3)(CO)(3)]2- and [Re(CN)(3)(CO)(3)]2- were synthesized and fully characterized. These complexes are additional members of the well-known d(6) transition metal complex series [M(CN)(3)(CO)(3)](n-). The analytical data obtained in this study thus offer a unique opportunity to study similarities and differences of cyanide and carbonyl binding in transition metal complexes.     

Complexation of silver and co-recovered metals with novel aza-crown ether macrocycles by electrospray ionization mass spectrometry

Electrospray ionization mass spectrometry (ESI-MS) is used to evaluate the metal binding selectivities of an array of novel caged macrocycles for silver, gold, copper, nickel, zinc, iron, lead, manganese and alkali metal ions. It is found that five of the new compounds display silver selectivity, and their relative affinities for various metals depend on the type, number, and arrangement of heteroatoms (N, O), the cavity size, and the presence of aromatic substituents. Alkali metal cation binding studies are used to evaluate the size-selectivities of the cavities of the macrocycles. Electronic structure calculation by B3LYP density function theory methods were used to model the metal complexes. The presence of nitrogen atoms in the macrocyclic ring is essential for silver selectivity over other transition metals and alkali metal ions, and the presence of aromatic groups also enhances silver avidity. Macrocycle 3, a triaza-18-crown-6 analog modified with two phenyl groups and a cage group, is capable of selective extraction of Ag+ from aqueous solutions in the presence of other transition metal ions and the most common alkali and alkaline earth metal ions.     

A Sorbent Extraction Procedure for the Preconcentration of Gold,Silver and Palladium on an Activated Carbon Column

ABSTRACT

A preconcentration method based on the use of an activated carbon column has been established for flame atomic absorption spectrometric determinations of gold, silver and palladium. The analytes were sorbed on the column as a complex of dithiophosphoric acid O, O-diethyl ester (DDTP). The sorbed analytes were eluted through the column with 2M NH₃ in acetone. Quantitative recoveries (≥95 %) for gold, silver and palladium were obtained from acidic solutions. The developing method was successfully applied to the determination of trace amounts of gold, silver and palladium in some samples with satisfactory results (relative standard deviation < 7 %; relative error < 3 %).