One-electron reduction of thionine studied by pulse radiolysis

One-electron reduction of thionine has been studied by using the technique of nanosecond pulse radiolysis and kinetic spectrophotometry. H,e _aq ⁻ as well as radicals derived from methanol, ethanol, isopropanol, THF, dioxane andt-butanol by H atom abstraction were used as reductants. The rate constants for the transfer of electrons from these radicalts to thionine were directly determined from the pseudo first-order formation rates of the product, semithionine and the one-electron reduction potential of thionine estimated. The absorption spectrum of semithionine in its different conjugate acid-base forms was found to be in agreement with previously reported spectra and the decay of the species was second order. By monitoring transient absorbance changes as a function of pH, twopK _a values were observed and, based on the effect of ionic strength on the second-order decay constants of the species were assigned to the equilibria described.     

Structure induced by irradiation of femtosecond laser pulse in dyed polymeric materials

We investigated the structures induced by an irradiation of a near‐infrared (NIR) femtosecond laser pulse in dye‐doped polymeric materials {poly(methyl methacrylate) (PMMA), thermoplastic epoxy resin (Epoxy), and a block copolymer of methyl methacrylate and ethyl acrylate‐butyl acrylate [p(MMA/EA‐BA) block copolymer]}. Dyes used were classified into two types—type 1 with absorption at 400 nm and type 2 with no absorption at 400 nm. The 400‐nm wavelength corresponds to the two‐photon absorption region by the irradiated NIR laser pulse at 800 nm. Type 1 dye‐doped PMMA and p(MMA/EA‐BA) block copolymer showed a peculiar dye additive effect for the structures induced by the line irradiation of a NIR femtosecond laser pulse. On the contrary, dye‐doped Epoxy did not exhibit a dye additive effect. The different results among PMMA, p(MMA/EA‐BA) block copolymer, and Epoxy matrix polymers are supposed to be related to the difference of electron‐acceptor properties. The mechanism of this type 1 dye‐additive‐effect phenomenon for PMMA and p(MMA/EA‐BA) block copolymer is discussed on the basis of two‐photon absorption of type 1 dye at 400 nm by the irradiation of a femtosecond laser pulse with 800 nm wavelength and the dissipation of the absorbed energy to the polymer matrix among various transition processes. Dyes with a low‐fluorescence quantum yield favored the formation of thicker grating structures. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2800–2806, 2002     

Localized electrons in 1,8-octanediol crystals studied by ESR spectroscopy and pulse radiolysis

Localized electrons in 1,8-octanediol crystals have been studied by pulse radiolysis and ESR spectroscopy. The maximum of the optical absorption is at 625 nm. The decay is first order with an activation energy of 16.3 kJ mole^?1. The assignment of the optical spectrum has been made by ESR at 67 K. When the electron decays the -CH₂CHCH₂- radical grows in.     

Structures induced by irradiation of femto-second laser pulse in polymeric materials

We investigated the structures induced by irradiation of near-infrared femto-second laser pulse in various polymer materials; olefin gel, acrylic adhesive, poly(ether sulphone) (PES), poly(methyl methacrylate) (PMMA), polycarbonate (PC), and block copolymers of methyl-methacrylate and ethyl acrylate-butyl acrylate. Line irradiation that was performed by scanning laser spots in polymer bulk formed volcano-like upheaval structures on the surfaces of PES, PMMA, and PC, which have relatively high glass-transition temperatures (T_g's); on the other hand, cave or channel structures on the surfaces of olefin gel and acrylic adhesive have low T_g's. For the block copolymers containing both low and high T_g's, aggregation of the submicron scale deposit was induced in the polymer bulk. The submicron scale deposit may be reproduced structures after photodecomposition or photocrosslinking of polymer-chain components induced by multiphoton excitation with femto-second laser irradiation. This deposit aggregation with a stripelike structure had different optical properties from the un-irradiated region. These structures induced by irradiation of femto-second laser pulse might be applicable for optical devices such as diffraction grating and optical guide. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 537–544, 2002; DOI 10.1002/polb.10111     

Ionic species in irradiated poly(methyl methacrylate). A pulse radiolysis and ESR study

Poly(methyl methacrylate) free of initiators was synthesized by γ-irradiation and cast into transparent films. The samples were investigated by ns pulse radiolysis at various temperatures, and by ESR spectroscopy after γ irradiation at 77°K. Short-lived transients with optical absorptions at 440 and 725 nm were observed. The 440 nm absorption has been ascribed to the cation and the 725 nm absorption (εG = 3000 M^?1 cm^?1 (100 eV)^?1, τ_1/2 = 190 ns at ?13°C, E_a = 6.5 kcal/mol) to the anion. These assignments are based on ESR data of samples of poly(methyl methacrylate) and pivalic acid methyl ester deuterated at the ester deuterated at the ester and α-methyl groups, respectively, and subjected to thermal annealing and photobleaching. The anion decomposes on photobleaching by loss of the ester ·CH₃ radical, and the cation is proposed to decay by loss of the ·CH₃ radical from the α-methyl group. The thermal decay of the anion is discussed.     

Investigation of the dynamics of radiolytic formation of ZnO nanostructured materials by pulse radiolysis

ZnO nanostructures have been synthesized by radiolytic methods. A Cobalt-60 γ-source and a 7 MeV linear electron accelerator (LINAC) was used for the radiolysis experiments. Reducing agent like hydrated electron (e_aq⁻), which is produced in radiolysis of water, was used to synthesize ZnO nanostructure materials from zinc salt. 1 M tert-butanol was used to quench the primary oxidizing radical like hydroxyl radical (OH) radiolytic water solution. Doses of about 80–130 kGy were used to perform radiolysis experiments in the present investigation. Time-resolved pulse radiolysis has been used to monitor the transient species involved in the formation of ZnO nanostructures by monitoring at different wavelengths. A scheme for the formation of the ZnO nanostructured materials by the radiolytic method has been described. The formation of ZnO nanostructures was confirmed by X-ray diffraction (XRD) measurements. Dynamic light scattering (DLS) measurements indicated that the size of the nanostructures is in the range of 6–8 nm, which is in agreement with that obtained from XRD. It is interesting to note that ZnO nanostructured materials, as prepared by the radiolytic method, exhibit strong room-temperature fluorescence.     

Photochemical stability of nonlinear optical chromophores in polymeric and crystalline materials

We compare the photochemical stability of the nonlinear optical chromophore configurationally locked polyene 2-{3-[2-(4-dimethylaminophenyl)vinyl]-5,5-dimethylcyclohex-2-enylidene} malononitrile (DAT2) embedded in a polymeric matrix and in a single-crystalline configuration. The results show that, under resonant light excitations, the polymeric compound degrades through an indirect process, while the DAT2 crystal follows a slow direct process. We show that chromophores in a crystalline environment exhibit three orders of magnitude better photostability as compared to guest-host polymer composites.     

Treatment of products made of polymeric materials

The properties of polymeric materials are considered from the point of view of processability. The differences of the chip formation process during the treatment of products made of polymeric materials compared to the treatment of metal products are shown. The types of chips formed in the process of cutting plastics are studied, which, as during the treatment of metals, yield information on the phenomena occurring in the zone of cutting (deformations and temperatures) and the quality of the treated surfaces. The empirical dependences of the forces of cutting on the treated material, the material of the cutting edge of a tool, and its geometrical parameters are given. The problems of the wear of tools during the treatment of polymeric materials and the features typical for the treatment of polymeric materials by cutting are considered.     

Radical scavenging reactions of chlorogenic acid: A pulse radiolysis study

At near neutral pH (approx. 5.5), the OH-adduct of chlorogenic acid (CGA), formed on pulse radiolysis of N₂O-saturated aqueous CGA solutions (λ _max = 400 and 450 nm) with k = 9 × 10⁹ dm³ mol⁻¹ s⁻¹, rapidly eliminates water (k = 1 × 10³ s⁻¹) to give a resonance-stabilized phenoxyl type of radical. Oxygen rapidly adds to the OH-adduct of CGA (pH 5.5) to form a peroxyl type of radical (k = 6 × 10⁷ dm³ mol⁻¹ s⁻¹). At pH 10.5, where both the hydroxyl groups of CGA are deprotonated, the rate of reaction of · OH radicals with CGA was essentially the same as at pH 5.5, although there was a marked shift in the absorption maximum to approx. 500 nm. The CGA phenoxyl radical formed with more specific one-electron oxidants, viz., Br ₂ ^·− and N ₃ ^· radicals show an absorption maximum at 385 and 500 nm, k ranging from 1–5.5 × 10⁹ dm³ mol⁻¹ s⁻¹. Reactions of other one-electron oxidants, viz., NO ₂ ^· , NO^· and CCl₃OO^· radicals, are also discussed. Repair rates of thymidine, cytidine and guanosine radicals generated pulse radiolytically at pH 9.5 by CGA are in the range of (0.7–3) × 10⁹ dm³ mol⁻¹ s⁻¹.     

Redox reactions of 2-hydroxy pyridine: A pulse radiolysis study

Rate constants for reactions of 2-pyridinol with one electron reductants, such ase _aq ⁻ and H atoms and one-electron oxidants, viz. OH, N₃, Br ₂ ⁻ , C1 ₂ ⁻ and O⁻ have been determined at different pH values using the pulse radiolysis technique. From the corrected absorption spectra of the product transient species, the extinction coefficients of these species at their respective absorption maxima have been determined. The kinetics of decay of these transients have been investigated. ThepK _a values of transients formed bye _aq ⁻ and OH radical reactions have been estimated to be 7.6 and 3.5 respectively. Rate constants for electron transfer from semireduced 2-pyridinol to different electron acceptors have been determined.     

Fundamental reactions in TiO2 nanocrystallite aqueous solutions studied by pulse radiolysis

Reactions of the hydrated electron, H atoms, 2-propanol, and methanol radicals with the TiO₂ nano-particles have been studied either directly or by competition kinetics. The radicals were produced by radiolysis of 2-propanol, t-butanol, or methanol aqueous solutions in acid pH's. The reactions involve electron injection to the conduction band. As expected, the t-butanol radical is inert towards TiO₂ under our conditions, while the other reducing radicals react with TiO₂. The reactivity decreases in the order: e_aq⁻>H>CH₃COHCH₃>CH₂OH. Two TiO₂ nanocrystallite sizes, with average diameters of 1.0 and 4.7 nm were compared. For equal concentrations (in terms of TiO₂ molecules), the rate of electron injection shows relatively little dependency on particle size. The rates of interfacial electron transfer and transfer coefficient are also reported.     

A pulse radiolysis investigation of the reactions of tributyl phosphate with the radical products of aqueous nitric acid irradiation

Tributyl phosphate (TBP) is the most common organic compound used in liquid-liquid separations for the recovery of uranium, neptunium, and plutonium from acidic nuclear fuel dissolutions. The goal of these processes is to extract the actinides while leaving fission products in the acidic, aqueous phase. However, the radiolytic degradation of TBP has been shown to reduce separation factors of the actinides from fission products and to impede the back-extraction of the actinides during stripping. As most previous investigations of the radiation chemistry of TBP have focused on steady state radiolysis and stable product identification, with dibutylphosphoric acid (HDBP) invariably being the major product, here we have determined room temperature rate constants for the reactions of TBP and HDBP with the hydroxyl radical [(5.00 +/- 0.05) x 10(9), (4.40 +/- 0.13) x 10(9) M(-1) s(-1)], hydrogen atom [(1.8 +/-0.2) x 10(8), (1.1 +/- 0.1) x 10(8) M(-1) s(-1)], nitrate radical [(4.3 +/- 0.7) x 10(6), (2.9 +/- 0.2) x 10(6) M(-1) s(-1)], and nitrite radical (<2 x 10 (5), <2 x 10(5) M(-1) s(-1)), respectively. These data are used to discuss the mechanism of TBP radical-induced degradation.     

Structure and dynamics of polymeric materials in nano-scale

The nano-palpation technique,i.e.,nanometer-scale elastic and viscoelastic measurements based on atomic force microscope,is introduced.It is demonstrated to be very useful in analyzing nanometer-scale materials properties for the surfaces and interfaces of various types of soft materials.It enables us to obtain not only structural information but also mechanical information about a material at the same place and at the same time.     

Application of the pulse radiolysis technique to reactions of organic radical ions

The nanosecond pulse radiolysis technique has been applied to study the rate constants for charge transfer and substitution reactions of radical ions. Electron transfer from biphenyl anion to styrene derivatives shows a correlation with the reduction potential of the acceptors expected from the Marcus theory. The positive charge transfer from biphenyl cation to the same acceptors shows a much larger rate constant, suggesting a considerable shift of the free energy relationship to the positive side of G^o. The substitution reaction of fluorenone anion with organic halides shows an S_N2 character, while that of diethyl fumarate shows electron transfer nature. The dimerization of radical anions has been proven for benzophenone and fluorenone, when their lifetime of the parent anions are prolonged by countercations.     

Quantum and excited-state yields in luminol chemiluminescence by pulse radiolysis

The data of our original paper show that dark reactions are involved in the e-beam-initiated chemiluminescence of luminol. The extent and nature of these “dark” reactions awaits further study.     

Micellar catalyzed redox reactions of bilirubin in CTAB medium. A pulse radiolysis study

The reaction of CO with bilirubin which is not detectable in homogeneous aqueous medium proceeds almost with diffusion controlled rate in CTAB micellar system. This could be explained on the basis of catalysis caused by the possible electrostatic surface potential of cationic CTAB Micelles. The rate constant for the oxidation of bilirubin by haloperoxyl radicals have been shown to increase with increasing solvent polarity. Although the polarity effect was small, it followed a trend in the expected direction. Micellar effect was not observed in the oxidation reactions when alcohol was present in high concentration. But a small increase in the rate constant was observed when alcohol concentration was lower. © 1994 John Wiley & Sons, Inc.