Interpolyelectrolyte complexes formation in dependence on the nature of polyelectrolytes

Interpolyelectrolyte complexes (PECs) were obtained starting from polycations with (N,N-dimethyl-2-hydroxypropylenammonium chloride) units in the main chain and sodium salts of the poly(acrylic acid), on one hand, and poly (2-acrylamido-2-methylpropane sulfonic acid), on the other hand, as polyanions. The polycations were different as concerns both the content of the quaternary ammonium salt groups and the degree of branching. The polyanions were different both by their structure and molecular weight. The complex formation was followed through the variation of the reduced viscosity and of the conductivity of the reaction medium vs. the unit molar ratio polyanion/polycation in two ranges of concentration.     

Water distribution in multilayers of weak polyelectrolytes

The water localization in thin polyelectrolyte multilayers assembled from poly(acrylic acid) and poly(allylamine hydrochloride) was investigated with neutron reflectivity in an atmosphere of controlled humidity and with bulk water. Water was found to be distributed asymmetrically within the multilayer and to localize preferentially at the polymer surface. The diffusion of water into the multilayer did not completely penetrate to the substrate, but instead there appeared to be an exclusion zone near the Si substrate. These results help to explain previous observations of anomalous water transport kinetics in weak polyelectrolyte systems.     

Solution behavior of sulfonate ionomer interpolymer complexes

The interaction of metal sulfonate ionomers with polymers containing low levels of amines has been investigated in solution. For example, zinc sulfo EPDM and a styrene/vinyl pyridine copolymer form such complexes over broad concentration ranges. The resultant solutions offer enhanced viscosities at dilute polymer concentrations. At high polymer levels solutions based on these complexes are lower in viscosity than the ionomer alone. These interpolymer complexes have been shown to exhibit an improved property/rheology balance in bulk systems. In solution, polymer complexes provide control of hydrocarbon solution viscosity not available with conventional polymers. Reduced viscosity-concentration studies suggest that these polymer complexes are a result of the amine-containing polymer interacting with intramolecular-associated ionomer coils, which at higher concentrations form a pseudonetwork.     

UV-cross-linkable multilayer microcapsules made of weak polyelectrolytes

Microcapsules composed of weak polyelectrolytes modified with UV-responsive benzophenone (BP) groups were fabricated by the layer-by-layer (LbL) technique. Being exposed to UV lights, capsules shrunk in the time course of minutes at irradiation intensity of 5 mW/cm(2). The shrinkage adjusted the capsule permeability, providing a novel way to encapsulate fluorescence-labeled dextran molecules without heating. Cross-linking within the capsule shells based on hydrogen abstraction via excited benzophenone units by UV showed a reliable and swift approach to tighten and stabilize the capsule shell without losing the pH-responsive properties of the weak polyelectrolyte multilayers.     

Study of interaction between two oppositely charged polyelectrolytes and formation of polyelectrolyte complexes

Polyelectrolyte complex formation has been studied between oppositely charged polyelectrolytes, e.g., polyethylene-imine, polymethacrylic acid, and methacrylic acid–methacrylamide copolymer. Formation of complexes could be shown through several experimental techniques, e.g., viscometry, conductometry, potentiometry, and IR spectra. It is suggested that these complexes are perhaps formed as a result of electrostatic cooperative interaction and a “ladder-like” interaction is likely to be more favorable.     

Reaction of substitution of low-molecular-mass organic bases in ternary interpolymer complexes

The reaction of the substitution of low-molecular-mass bases forming a part of low-ordered and high-ordered ternary interpolymer complexes for low-molecular-mass bases (dipyridyls, aromatic and aliphatic mono- and diamines) from solutions has been studied. It has been shown that, independently of the chemical natures and structures of low-molecular-mass organic bases, the exchange reaction proceeds between all studied organic bases that are constituents of ternary interpolymer complexes or are present in solutions.     

Kinetics of Ga(NOTA) formation from weak Ga-citrate complexes

Gallium complexes are gaining increasing importance in biomedical imaging thanks to the practical advantages of the (68)Ga isotope in Positron Emission Tomography (PET) applications. (68)Ga has a short half-time (t(1/2) = 68 min); thus the (68)Ga complexes have to be prepared in a limited time frame. The acceleration of the formation reaction of gallium complexes with macrocyclic ligands for application in PET imaging represents a significant coordination chemistry challenge. Here we report a detailed kinetic study of the formation reaction of the highly stable Ga(NOTA) from the weak citrate complex (H(3)NOTA = 1,4,7-triazacyclononane-1,4,7- triacetic acid). The transmetalation has been studied using (71)Ga NMR over a large pH range (pH = 2.01-6.00). The formation of Ga(NOTA) is a two-step process. First, a monoprotonated intermediate containing coordinated citrate, GaHNOTA(citrate)*, forms in a rapid equilibrium step. The rate-determining step of the reaction is the deprotonation and slow rearrangement of the intermediate accompanied by the citrate release. The observed reaction rate shows an unusual pH dependency with a minimum at pH 5.17. In contrast to the typical formation reactions of poly(amino carboxylate) complexes, the Ga(NOTA) formation from the weak citrate complex becomes considerably faster with increasing proton concentration below pH 5.17. We explain this unexpected tendency by the role of protons in the decomposition of the GaHNOTA(citrate)* intermediate which proceeds via the protonation of the coordinated citrate ion and its subsequent decoordination to yield the final product Ga(NOTA). The stability constant of this intermediate, log K(GaHNOTA(citrate)*) = 15.6, is remarkably high compared to the corresponding values reported for the formation of macrocyclic lanthanide(III)-poly(amino carboxylates). These kinetic data do not only give mechanistic insight into the formation reaction of Ga(NOTA), but might also contribute to establish optimal experimental conditions for the rapid preparation of Ga(NOTA)-based radiopharmaceuticals for PET applications.     

Effect of mixing on the formation of complexes of hyperbranched cationic polyelectrolytes and anionic surfactants

The effect of different mixing protocols on the charged nature and size distribution of the aqueous complexes of hyperbranched poly(ethylene imine) (PEI) and sodium dodecyl sulfate (SDS) was investigated by electrophoretic mobility and dynamic light scattering measurements at different pH values, polyelectrolyte concentrations, and ionic strengths. It was found that at large excess of the surfactant a colloidal dispersion of individual PEI/SDS nanoparticles forms via an extremely rapid mixing of the components by means of a stop-flow apparatus. However, the application of a less efficient mixing method under the same experimental conditions might result in large clusters of the individual PEI/SDS particles as well as in a more extended precipitation regime compared with the results of stop-flow mixing protocol. The study revealed that the larger the charge density and concentration of the PEI, the more pronounced the effect of mixing becomes. It can be concluded that an efficient way to avoid precipitation in the solutions of oppositely charged polyelectrolytes and surfactants might be provided by extending the range of kinetically stable colloidal dispersion of polyelectrolyte/surfactant nanoparticles via the application of appropriate mixing protocols.     

Design of composite films and ultrathin membranes of interpolymer complexes

The formation of stoichiometric interpolymer complexes (IPCs) between the poly(vinyl ether) of ethyleneglycol and the copolymer of acrylic acid–butyl vinyl ether, between copolymers of vinyl ether of ethyleneglycol–butyl vinyl ether, and the copolymer of acrylic acid–vinylbutyl ether is demonstrated by conductimetric, potentiometric, viscometric and spectroturbidimetric methods in aqueous solution. The swelling/deswelling behavior of composite films derived from the IPC has been studied in water, alcohol and water–alcohol mixtures, depending on various factors. The formation of polyelectrolyte complexes (PECs) between the copolymer of acrylic acid–vinyl butyl ether and poly(vinyl ether of monoethanolamine) on a dimeric interface of water–butanol has been studied by the potentiometric method. The kinetics of PEC formation on a dimeric interface was measured and the activation energy of this process was calculated. Copyright © 2000 John Wiley & Sons, Ltd.     

Effect of matrix domination in PANI interpolymer complexes with polyamidosulfonic acids

Various polyaniline (PANI) interpolymer complexes with polyacids in the form of molecular solutions were synthesized by chemical oxidative polymerization of aniline in the presence of water-soluble poly-(2-acrylamido-2-methyl-1-propanesulfonic acid) (flexible backbone), poly-p,p′-(2,2′-disulfoacid)-diphenylene-terephthalamide (t-PASA, rigid backbone), and their mixtures in different ratios. The complexes were characterized by UV-Vis-near infrared spectroscopy in solutions; also, the films’ drop-casts from these solutions were investigated by cyclic voltammetry, spectroelectrochemical, direct current (DC) conductivity, and atomic force microscopy (AFM) measurements. It was shown that the nature of polyacid affects the shape of spectra and the dynamics of their changes. The character of spectral changes during the matrix synthesis of PANI in the presence of mixtures of the rigid-chain and flexible-chain matrixes and the study of spectral properties of the obtained PANI solutions demonstrates the existence of the rigid-matrix domination effect in the process of formation of PANI interpolymer complexes. Spectral properties of the obtained PANI complexes with the mixtures of flexible-chain and rigid-chain polyacids of different ratios (3:1, 1:1, 1:3, and 1:6) are very similar to those ones for the complex with rigid-chain t-PASA. At the same time, there is a correlation between the electrical conductivity and morphology of the films of PANI complexes and their composition, the conductivity passing through a minimum for the complexes with the polyacid mixtures (6:1, 3:1, and 1:1).     

The spectroelectrochemical behavior of films of polyaniline interpolymer complexes in the near infrared spectral region

In this work, we carry out spectroelectrochemical studies of films of interpolymer complexes of polyaniline (PANI) prepared via the chemical and electrochemical template polymerization of aniline in the presence of polyamide sulfonic acids with different structures. It is shown that their spectroelectrochemical behavior in the near infrared region depends on the rigidity of the chain of the polymer sulfonic acid matrix. Electrodeposited films of PANI complexes with a rigid-chain polyacid exhibit a more intense absorption in the near infrared region (1000–2200 nm) and a less intense absorption in the absorption region of localized polarons (around 750 nm) in comparison with complexes with a flexible-chain polyacid. The comparison of the dependence of absorption in the near infrared region on potential with the cyclic voltammetry curves suggests that the chromophores responsible for this absorption are radical cations in nature. In the spectra of the films of chemically synthesized PANI complexes with a flexible-chain polyacid, during a long-term cycling in the region of potentials of the first redox stage of PANI, the absorption in the near infrared region which corresponds to delocalized polarons is also formed. This is apparently attributed to the intensification of the intermolecular interactions under the conformational fluctuations that accompany the change in the degree of oxidation of the film during cyclic voltammetry.     

Nanoparticle modification by weak polyelectrolytes for pH-sensitive pickering emulsions

The affinity of weak polyelectrolyte coated oxide particles to the oil-water interface can be controlled by the degree of dissociation and the thickness of the weak polyelectrolyte layer. Thereby the oil in water (o/w) emulsification ability of the particles can be enabled. We selected the weak polyacid poly(methacrylic acid sodium salt) and the weak polybase poly(allylamine hydrochloride) for the surface modification of oppositely charged alumina and silica colloids, respectively. The isoelectric point and the pH range of colloidal stability of both particle-polyelectrolyte composites depend on the thickness of the weak polyelectrolyte layer. The pH-dependent wettability of a weak polyelectrolyte-coated oxide surface is characterized by contact angle measurements. The o/w emulsification properties of both particles for the nonpolar oil dodecane and the more polar oil diethylphthalate are investigated by measurements of the droplet size distributions. Highly stable emulsions can be obtained when the degree of dissociation of the weak polyelectrolyte is below 80%. Here the average droplet size depends on the degree of dissociation, and a minimum can be found when 15 to 45% of the monomer units are dissociated. The thickness of the adsorbed polyelectrolyte layer strongly influences the droplet size of dodecane/water emulsion droplets but has a less pronounced impact on the diethylphthalate/water droplets. We explain the dependency of the droplet size on the emulsion pH value and the polyelectrolyte coating thickness with arguments based on the particle-wetting properties, the particle aggregation state, and the oil phase polarity. Cryo-SEM visualization shows that the regularity of the densely packed particles on the oil-water interface correlates with the degree of dissociation of the corresponding polyelectrolyte.     

Gas-separation membranes based on interpolymer complexes of sulfonate-containing aromatic polyamides

The gas-separation properties of membranes prepared from sulfonate-containing aromatic polyamide and aliphatic polyamines are studied. With the use of potentiometry, IR spectroscopy, and elemental analysis, it is shown that interpolymer complexes arising in these systems are primarily stabilized by electrostatic forces, while the degree of transformation in them is dependent on the basicity of polyamine and the conditions of the interpolymer reaction. The relationship between the nature of polyamine, the composition of the interpolymer complex, and the degree of transformation in it and the gas-separation characteristics of the membranes is established.     

Thermosensitive noncovalently bonded block copolymerlike micelles from interpolymer complexes

Interpolymer complexes between polystyrene‐b‐poly(2‐vinylpyridine), (PS‐P2VP), and poly(methacrylic acid) (PMAA), have been studied in dioxane. Dioxane is a good solvent for PS‐P2VP copolymers but it is a nonsolvent for PMAA at room temperature. In this way noncovalent bonded micelles are formed after mixing the solutions of the polymers at 60 °C and then allowing them to cool at room temperature. Static and dynamic light scattering as well as viscosity measurements have been used to study the dependence of aggregate mass and size as a function of the molar ratio of functional groups in PS‐P2VP/PMAA mixtures, as well as temperature. Plots of apparent average molecular weight and hydrodynamic radius of the aggregates versus amine to carboxyl group ratio show a maximum at a ratio close to one. The size of the aggregates decreases at higher ratios because of the formation of more stable micelles with smaller cores. In all cases rather compact structures were formed, as evidenced by viscometry. The mass of the aggregates was found to decrease by an increase in temperature while hydrodynamic radii were increased. This was attributed to the increase of the thermodynamic quality of the solvent toward PMAA as temperature increases. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6230–6237, 2004     

Effect of added salt on the stability of hydrogen-bonded interpolymer complexes

Association of macromolecules in aqueous media through hydrogen bonding results in the formation of discrete interpolymer complexes (IPCs). In this work, the effect of added salt on the stability of IPCs consisting of polyacrylic acid and either a flexible polymer (polyethylene oxide or polyvinylpyrrolidone) or a semirigid polymer (hydroxy propylcellulose) is examined by a combination of spectrophotometry, viscometry and potentiometry. Addition of a neutral salt (e.g., NaCl) typically results in IPC aggregation. The response of the IPCs to salts that promote salting-in (i.e., LiSCN, NaSCN and GuSCN, where Gu denotes guanidine) is strongly cation-dependent, since Li⁺ cations induce an increase in solution pH, whereas Gu⁺ cations compete with polyacrylic acid for complexation sites. The degree of complexation (), calculated from potentiometric data, is greatest for IPCs in the absence of salt and is found to decrease in the order NaCl>NaSCN>GuSCN. Addition of salts that induce salting-in at polymer solution concentrations favoring complexation is found to enhance IPC solubility (and reduce ) until the IPC particles are either completely solubilized or dissociated.     

Microcapsules made of weak polyelectrolytes: templating and stimuli-responsive properties

Hollow microcapsules composed of the weak polyelectrolytes poly(allylamine hydrochloride) (PAH) and poly(methacrylic acid) (PMA) are templated on silicon oxide particles using the layer-by-layer adsorption. The colloidal template is removed with a buffer system of hydrofluoric acid and ammonium fluoride. With this buffer system, the template can be dissolved in mild pH conditions, where the polymeric layers are still stable. The morphology and the thickness of the resulting capsules are investigated with atomic force microscopy. The resulting hollow capsules show pH-dependent properties. The shells are stable over a broad pH range and swell and immediately dissolve for pH values below 2.3 and above 11. If the molecular weight of the poly(methacrylic acid) is increased, the enhanced entanglement of the polymers results in a reversible swelling of the capsules at low and at high pH. The swelling degree is probed with confocal laser scanning microscopy. In addition to the pH-dependent size variations, the different ionization degree of poly(methacrylic acid) as a function of pH is used for the selective binding of calcium ions.     

Viscosity from ternary mixtures of two weakly charged polyelectrolytes in solution

The mode-mode coupling approximation (MMCA) is applied to describe the behavior of the reduced viscosity η_r from ternary mixtures of two weakly charged polyelectrolytes in solution. Similarly (ε = +1) as well as oppositely (ε = −1) weakly charged polyions are discussed in this work. The variation of η_r with the total polyelectrolyte concentration C_T exhibits a peak. The position and the height of this peak show for a given concentration of added salt C_S a sensitive variation with: the charge parameters (degrees of ionization) f₁ and f₂ of both polyelectrolytes, the proportion of polyelectrolyte 1 within the mixture (x = C₁/C_T) and the Flory interaction parameter χ_F between monomeric units of different species. This calculation is presented within the framework of the Rouse model where no hydrodynamic interactions are taken into account.     

The determination of formation constants of weak complexes by potentiometric measurements: experimental procedures and calculation methods

Experimental and calculation procedures for the study of weak complexes by the pH-measurement technique are described. An algorithm for the calculation of formation constants, together with a computer program in FORTRAN and BASIC versions, is reported. The problems of studying weak interactions are discussed. Simulated titration curves and experimental data for K(+)-thiodiacetate complexation were used to check the proposed method.     

The stereochemistry of enolate formation in THF-hexane mixtures

The effect of solvent on the stereochemistry of deprotonation of 4-heptanone in THF-hexane mixtures is plotted in the figure on the following page. The E/Z ratio varies from 1.5 in pure THF to 0.7 in 90% hexane.