Novel nanocomposite membranes prepared with PVC/ABS and silica nanoparticles for C<Subscript>2</Subscript>H<Subscript>6</Subscript>/CH<Subscript>4</Subscript> separation

Composite membranes based on polyvinyl chloride and acrylonitrile butadiene styrene (ABS) copolymer have been prepared and then filled with 2–8 wt % of silica nanoparticles. Membranes were fabricated by solution casting method using dimethylacetamide. The performance of prepared membranes were studied for methane and ethane at the feed pressure of 1.0, 1.5, 2.0, and 3.0 bar at 35°C. By increasing the percentage of ABS, permeability of methane and ethane increased. In addition, by adding the silica nanoparticles in the membrane, permeability of gas increased in all cases. The highest gas pair selectivity for C₂H₆/CH₄ could be obtained from PVC/BS (20 wt %) which loaded with 8 wt % of silica nanoparticles. The results of this study suggest that high performance gas separation nanocomposite membranes can be attained by adopting a judicious combination of blending technique for polymeric membrane, optimized loading percentage, and feed operating conditions.     

A Rational Design of Microporous Aerogel for Excellent CO<Subscript>2</Subscript> Capture and Selectivities via Co-Synergistic Effects of Electrostatic In-plane and π–π Stacking Interactions

Microporous aerogel (PEINK) with a nitrogen-containing framework, high CO₂ capture and selectivity were obtained through the condensation polymerization of 1,3,5-tris-(4-fluorobenzoyl)benzene with 5-hydroxyindol. The uptake capacity for CO₂ reached up to 17.7 wt % (1.0 bar, 273 K), and the high CO₂/N₂ = 16, CO₂/CH₄ = 29 selectivity. Density functional theory illustrated that a CO₂ molecular was captured via synergistic efforts with π–π stacking of indole group and electrostatic in-plane binding of an adjacent ether unit, thus the selectivity and adsorption of CO₂ were strengthen. The proposed co-synergistic effect on one CO₂ molecular is expected to be a new theory for the design of high CO₂ capture materials.     

Adsorption equilibria of CO<Subscript>2</Subscript> and CH<Subscript>4</Subscript> in cation-exchanged zeolites 13X

Ion-exchange with different cations (Na⁺, NH₄ ⁺, Li⁺, Ba²⁺ and Fe³⁺) was performed in binderless 13X zeolite pellets. Original and cation-exchanged samples were characterized by thermogravimetric analysis coupled with mass spectrometry (inert atmosphere), X-ray powder diffraction and N₂ adsorption/desorption isotherms at 77 K. Despite the presence of other cations than Na (as revealed in TG-MS), crystalline structure and textural properties were not significantly altered upon ion-exchange. Single component equilibrium adsorption isotherms of carbon dioxide (CO₂) and methane (CH₄) were measured for all samples up to 10 bar at 298 and 348 K using a magnetic suspension balance. All of these isotherms are type Ia and maximum adsorption capacities decrease in the order Li > Na > NH₄–Ba > Fe for CO₂ and NH₄–Na > Li > Ba for CH₄. In addition to that, equilibrium adsorption data were measured for CO₂/CH₄ mixtures for representative compositions of biogas (50 % each gas, in vol.) and natural gas (30 %/70 %, in vol.) in order to assess CO₂ selectivity in such scenarios. The application of the Extended Sips Model for samples BaX and NaX led to an overall better agreement with experimental data of binary gas adsorption as compared to the Extended Langmuir Model. Fresh sample LiX show promise to be a better adsorption than NaX for pressure swing separation (CO₂/CH₄), due to its higher working capacity, selectivity and lower adsorption enthalpy. Nevertheless, cation stability for both this samples and NH₄X should be further investigated.     

Adsorption of CO<Subscript>2</Subscript>-containing gas mixtures over amine-bearing pore-expanded MCM-41 silica: application for CO<Subscript>2</Subscript> separation

Adsorption of CO₂, N₂, CH₄ and H₂ on triamine-grafted pore-expanded MCM-41 mesoporous silica (TRI-PE-MCM-41) was investigated at room temperature in a wide range of pressure (up to 25 bar) using gravimetric measurements. The material was found to exhibit high affinity toward CO₂ in comparison to the other species over the whole range of pressure. Column-breakthrough dynamic measurements of CO₂-containing mixtures showed very high selectivity toward CO₂ over N₂, CH₄ and H₂ at CO₂ concentrations within the range of 5 to 50%. These conditions are suitable for effective removal of CO₂ at room temperature from syngas, flue gas and biogas using temperature swing (TS) or temperature-pressure swing (TPS) regeneration mode. Moreover, TRI-PE-MCM-41 was found to be highly stable over hundreds of adsorption-desorption cycles using TPS as regeneration mode.     

Adsorption behaviors of CO<Subscript>2</Subscript> and CH<Subscript>4</Subscript> on zeolites JSR and Na<Subscript>n</Subscript>JSR using the GCMC simulations

The adsorption behaviors of CO₂ and CH₄ on new siliceous zeolites JSR and Na_nJSR (n = 2, 8, 16) were simulated using the Grand Canonical Monte Carlo method. The adsorption isotherms of CO₂ became higher with an increase in the Na⁺ number at a low pressure range (<150 kPa), whereas the isotherms showed a crossover with increasing pressure and the adsorption amount became smaller at a high pressure range (>850 kPa). With an increase in Na⁺ number, the pore volume decreased as the pore space was occupied by increasing Na⁺ ions. Additionally, two energy peaks on the interaction energy curves implied that CO₂ was adsorbed on two active sites. On the other hand, the adsorption amount of CH₄ decreased with an increase in the Na⁺ number and only one energy peak was observed. Adsorption isotherms were well fitted with the Langmuir and Freundlich equations up to 1000 kPa and the adsorption affinity of CO₂ on Na₁₆JSR zeolite was highest. The adsorption capacities of CO₂ in the studied zeolites were up to 38 times higher than those of CH₄. Diffusion constants of CO₂ and CH₄ decreased with an increase in the adsorbed amount and Na⁺ number. Considering the adsorbed amount, adsorption selectivity and affinity, zeolites JSR with a low Na⁺ number (JSR and Na₂JSR) is a good candidate for a pressure swing adsorption in the separation of CO₂/CH₄ mixture whereas JSR zeolites with high Na⁺ ratios (Na₁₆JSR and Na₈JSR) may be a better selection for a vacuum swing adsorption.     

Preparation and characterization of (Pebax 1657 + silica nanoparticle)/PVC mixed matrix composite membrane for CO<Subscript>2</Subscript>/N<Subscript>2</Subscript> separation

In this work, the films of poly(ether-block-amide) (Pebax 1657) and hydrophilic/hydrophobic silica nanoparticles (0–10 wt%) were coated on a poly(vinyl chloride) (PVC) ultrafiltration membrane to form new mixed matrix composite membranes (MMCMs) for CO₂/N₂ separation. The membranes were characterized by SEM, FTIR, DSC and XRD. Successful formation of a non-porous defect-free dense top layer with ~4 μm of thickness and also uniform dispersion of silica nanoparticles up to 8 wt% loading in Pebax matrix were confirmed by SEM images. The gas permeation results showed an increase in the permeance of all gases and an increase in ideal CO₂/N₂ selectivity with the increase in silica nanoparticle contents. Comparison between the incorporation of hydrophilic and hydrophobic silica nanoparticle into Pebax matrix revealed that the great enhancement of CO₂ solubility is the key factor for the performance improvement of Pebax + silica nanoparticle membranes. The best separation performance of the hydrophilic silica nanoparticle-incorporated Pebax/PVC membrane for pure gases (at 1 bar and 25 °C) was obtained with a CO₂ permeability of 124 barrer and an ideal CO₂/N₂ selectivity of 76, i.e., 63 and 35% higher than those of neat Pebax membrane, respectively. The corresponding values for hydrophobic silica nanoparticle-incorporated Pebax/PVC membrane were 107 barrer for CO₂ permeability and 61 for ideal CO₂/N₂ selectivity. Also the performances of MMCMs improved upon pressure increase (1–10 bar) owing to the shift in plasticizing effect of CO₂ towards the higher pressures. In addition, an increase in permeabilities with a decrease in ideal selectivity was observed upon temperature increase (25–50 °C) due to the intensification of chain mobility.     

Preparation of piperazine-grafted amine-functionalized UiO-66 metal organic framework and its application for CO<Subscript>2</Subscript> over CH<Subscript>4</Subscript> separation

UiO-66 amine functionalized was synthesized by solvothermal method. Post-synthetic modification of UiO-66-NH₂ with piperazine, a known promoter to enhance the chemisorption rate of CO₂ uptake, was carried out and analyzed to understand its crystalline structure, morphology and porous structure. Results show that piperazine is an effective agent for enhancing the capacity of absorption of CO₂. This porous product exhibits an improved CO₂ uptake at pressures up to 3000 kPa via physisorption and chemisorption mechanisms. The CH₄ adsorption and desorption isotherms on UiO-66, UiO-66-NH₂ and pip-UiO-66-NH₂ at temperature of 298.15 K and pressures ranging from 0 to 5000 kPa were carried out. IAS theory for a mixture of 0.05 bar CO₂, 0.85 bar CH₄ and 0.1 bar other gas revealed a selectivity factor of 19.09 for CO₂/CH₄ from pip-UiO-66-NH₂. Results show that these materials are effective adsorbents for CO₂ and CH₄ uptakes.     

A comparative study of Ir/Ga<Subscript>2</Subscript>O<Subscript>3</Subscript>, Pt/Ga<Subscript>2</Subscript>O<Subscript>3</Subscript>, and Ru/Ga<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts in selective hydrogenation of crotonaldehyde

Catalytic performance of gallia-supported iridium catalysts in the reaction of selective hydrogenation of crotonaldehyde in the gas phase was studied and compared to that of platinum and ruthenium catalysts. The best catalytic properties in terms of the selectivity to crotyl alcohol are shown by 5 wt % Pt/α-Ga₂O₃ and 5 wt % Ir/α-Ga₂O₃ catalysts prepared from nonchlorine precursors: Pt(acac)₂ and Ir(acac)₃, but for the 5 wt % Pt/α-Ga₂O₃ a very high selectivity of 75% at the high conversion (ca. 60%) is observed. A high selectivity of galia-supported iridium and platinum catalysts was explained by the surface reducibility of gallium oxide leading to covering (decoration) of platinum and iridium by gallium suboxides and the promoting effect of gallium.     

High-Efficient Conversion of CO<Subscript>2</Subscript> in AC-Pulsed Tornado Gliding Arc Plasma

An AC-pulsed tornado gliding arc plasma was employed for CO₂ conversion via CO₂ decomposition and dry reforming reactions. A stable and high-efficient constant arc length discharge mode was obtained in this plasma reactor. And then, CO₂ conversion was studied under this discharge mode. In the case of CH₄/CO₂ = 0, CO₂ was converted to CO and O₂ via the CO₂ decomposition reaction. Energy efficiency of 29 % was attained at CO₂ conversion of 6 %. With strong reducing agent CH₄ added into CO₂, the main contributor of CO₂ conversion changed from CO₂ decomposition to dry reforming of CH₄. Conversions of CH₄ and CO₂, energy efficiency and energy cost changed sharply at CO₂/CH₄ ratios lower than 1/4, while they changed slowly at CH₄/CO₂ ratios above 1/4. In the case of CH₄/CO₂ = 2/3, energy efficiency of 68 % and syngas energy cost of 1.6 eV/mole were achieved at CH₄ conversion of 29 % and CO₂ conversion of 22 %.     

Gas-separating properties of membranes based on star-shaped fullerene (C<Subscript>60</Subscript>)-containing polystyrenes

Based on regular star-shaped PSs differing in the structure of the branching center (one or two covalently bound fullerene C₆₀ molecules) and in the number of branchings (6 and 12), homogeneous gas-separation membranes have been produced. The transport behavior of the membranes with respect to several gases, such as H₂, He₂, N₂, CO, CO₂, and CH₄, has been studied by mass spectrometry. It has been found that the membranes prepared from six-arm PSs are characterized by a smaller density of macromolecular packing than the membranes obtained from 12-arm PCs and, consequently, they possess higher gas permeability. The starshaped PSs demonstrate a higher selectivity factor for separation of the O₂/N₂ gas pair compared to the corresponding characteristics of the linear PSs. The analysis of gas-separation characteristics by means of the Reitlinger-Robeson diagrams demonstrates that the transport behavior of star-shaped PSs qualitatively surpasses similar parameters of the known polymers in the separation of the CO/N₂ gas pair.     

Amine‐Appended Hierarchical Ca‐A Zeolite for Enhancing CO2/CH4 Selectivity of Mixed‐Matrix Membranes

An amine‐appended hierarchical Ca‐A zeolite that can selectively capture CO₂ was synthesized and incorporated into inexpensive membrane polymers, in particular polyethylene oxide and Matrimid, to design mixed‐matrix membranes with high CO₂/CH₄ selectivities. Binary mixture permeation testing reveals that amine‐appended mesoporous Ca‐A is highly effective in improving CO₂/CH₄ selectivity of polymeric membranes. In particular, the CO₂/CH₄ selectivity of the polyethylene oxide membrane increases from 15 to 23 by incorporating 20 wt % amine‐appended Ca‐A zeolite. Furthermore, the formation of filler/polymer interfacial defects, which is typically found in glassy polymer‐zeolite pairs, is inhibited owing to the interaction between the amine groups on the external surface of zeolites and polymer chains. Our results suggest that the amine‐appended hierarchial Ca‐A, which was utilized in membrane fabrication for the first time, is a good filler material for fabricating a CO₂‐selective mixed‐matrix membrane with defect‐free morphology.     

High-performance CO<Subscript>2</Subscript> capture on amine-functionalized hierarchically porous silica nanoparticles prepared by a simple template-free method

The adsorption of CO₂ on polyethyleneimine (PEI)-functionalized hierarchically porous silica nanoparticles (PSNs), prepared by using rice husk as a silica source via a simple template-free method, was reported in this study. Compared with traditional alkaline fusion and surfactant-templating methods for preparing waste-derived porous silica materials as CO₂ adsorbents, this method holds specific important advantages in being an inexpensive, and energy-saving process with faster production rate. The results revealed that the (NH₄)₂SiF₆ salt formed during the synthetic process served as an effective porogen, which can be readily removed by washing with water. Additionally, the total pore volumes of PSNs materials were strongly correlated to the amount of (NH₄)₂SiF₆. When evaluated as a support of PEI for CO₂ adsorption, 55PEI/PSNs(12/14) could reach 159 mg/g at 75 °C under 15 % CO₂, which was remarkably superior to those using waste silicate precursors reported in the previous literature. It was demonstrated that both PEI loading, and total pore volume of the PEI/silica composite sorbents, played key roles on CO₂ adsorption. Besides, 55PEI/PSNs(12/14) also showed high stability during 20 cycles of adsorption–desorption operation, implying its high potential in post-combustion CO₂ capture.     

Facile Synthesis of Polyethylenimine and Nano-TiO<Subscript>2</Subscript> Particles Functionalized PolyHIPE Beads for CO<Subscript>2</Subscript> Capture

Polyethylenimine (PEI) and titanium dioxide nanoparticles (nano-TiO₂) functionalized poly- HIPE beads were synthesized by suspension polymerization of styrene/divinylbenzene high internal phase emulsion (HIPE) containing PEI and nano-TiO₂ particles in inner phase. The products are uniform and spherical beads with average diameter of 1 mm. Characterization results showed good thermal stability and desired mechanical strength. CO₂ adsorption tests were performed with CO₂/H₂O/N₂ (1 : 1 : 8) gas mixture. Nano-TiO₂ particles distinctly improved the CO₂ adsorption performance of the polyHIPE beads, resulting in enhanced CO₂ adsorption capacity and fast adsorption/desorption kinetics. Besides, the functionalized polyHIPE beads exhibited remarkable cycle stability.     

Voltammetric determination of vitamin B<Subscript>6</Subscript> (pyridoxine) at a graphite screen-printed electrode modified with graphene oxide/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@SiO<Subscript>2</Subscript> nanocomposite

The preparation and study of electrochemical properties of a graphite screen-printed electrode (SPE) modified with the GO/Fe₃O₄@SiO₂ (GO is graphene oxide) nanocomposites are described. The morphologies of the GO/Fe₃O₄@SiO₂ nanocomposites were examined by scanning electron microscopy. The electrochemical oxidation of vitamin B₆ (pyridoxine) on SPE modified with the GO/Fe₃O₄@SiO₂ nanocomposite was investigated by cyclic voltammetry, differential pulse voltammetry, and chronoamperometry. Under optimum conditions (pH 7.0), the vitamin B₆ oxidation at the surface of the modified SPE occurs at a potential about 190 mV less positive than that at the unmodified SPE. A linear voltammetric response for vitamin B₆ was obtained in the concentration range 1.0?10 ⁶—9.0?10 ⁴ mol L^–1 with a detection limit of 5.2?10 ⁷ mol L^–1 using differential pulse voltammetry. The developed sensor was also successfully applied for determination of trace level of vitamin B₆ in both the standard vitamin B₆ sample and biological samples (urine).     

Pebax‐Based Membrane Filled with Two‐Dimensional Mxene Nanosheets for Efficient CO2 Capture

Mixed matrix membranes (MMMs) made from inorganic fillers and polymers is a kind of promising candidate for gas separation. In this work, two‐dimensional MXene nanosheets were synthesized and incorporated into a polyether‐polyamide block copolymer (Pebax) matrix to fabricate MMM for CO₂ capture. The physicochemical properties of MXene nanosheets and MXene/Pebax membranes were studied systematically. The introduction of MXene nanosheets provided additional molecular transport channels and meanwhile enhanced the CO₂ adsorption capacity, thereby enhancing both the CO₂ peremance and CO₂/N₂ selectivity of Pebax membrane. The optimized MXene/Pebax membrane with a MXene loading of 0.15 wt % displayed a high separation performance with a CO₂ permeance of 21.6 GPU and a CO₂/N₂ selectivity of 72.5, showing potential application in CO₂ capture.     

Enhanced CO2-selective behavior of Pebax-1657: A comparative study between the influence of graphene-based fillers

Mixed matrix membranes (MMMs) containing graphene-based fillers have attracted considerable attention in the field of gas separation. In this study, two types of graphene derivatives (Graphene (G) and Graphene Oxide (GO)) were embedded into the poly-ether-block-amide (Pebax) based MMM to investigate and compare CO₂/N₂ separation at various filler loadings (0.3–1 wt%). The morphologies of the prepared neat Pebax and MMMs were characterized by SEM, XRD, FTIR and DSC. Compared with the neat Pebax, the permeability of all gases was increased by adding filler content in the MMMs due to the crystallinity decrement of the polyamide (PA) segment. The best separation performance of the Pebax/G MMMs occurred at 0.7 wt%, where the CO₂ permeability increased from 26.51 to 44.78 Barrer (~1.7 times). Also, for the Pebax/GO MMMs, the CO₂ permeability was increased up to 58.96 Barrer (~2.2 times) by adding 0.5 wt% filler. This further gas permeation increment for the Pebax/GO sample was attributed to the higher affinity of GO nanosheets to CO₂ sorption, which can facilitate CO₂ gas transition through the membrane matrix. Moreover, the CO₂/N₂ ideal selectivity increased from 74.26 for the neat Pebax to 111.95 (~1.5 times) and 120.72 (~1.62 times) by adding 0.7 wt% G (Pebax/G-0.7) and 1 wt% GO (Pebax/GO-1) into Pebax, respectively. As a consequence, graphene derivatives can be recognized as a promising developer of permselectivity (permeability and selectivity) of the MMMs.     

Pebax/poly(vinyl alcohol) mixed matrix membrane incorporated by amine-functionalized graphene oxide for CO2 separation

Graphene oxide nanoparticles (GO) were firstly functionalized using p-phenylenediamine and then utilized as nanofillers to prepare poly(ether-block-amide) (Pebax®-1657)/poly(vinyl alcohol) (PVA-60000)-based mixed-matrix membranes. The modified GO as well as the fabricated mixed matrix membranes underwent some characterization analyses, including FTIR, TGA, XRD, FESEM, and EDX. The influence of amine-modified nanoparticles content (2, 4, and 6 wt%), and feed pressure on CO₂, CH₄, and N₂ permeabilitis and ideal CO₂/CH₄ and CO₂/N₂ selectivities values of the MMMs were investigated. The permeation experiments demonstrated that Pebax/PVA (10 and 15 wt%) blend membranes caused an increase in CO₂ permeability owing to the high affinity of polar CO₂ molecules to polar PVA segments. Moreover, the incorporation of 6 wt% amine-functionalized GO into the Pebax/PVA (10 wt%) and Pebax/PVA (15 wt%) blend polymer raised the CO₂ permeability and CO₂/CH₄ and CO₂/N₂ selectivity by nearly 43%, 28%, and 37%, respectively, due to the higher CO₂ adsorption capacity of the amine-functionalized GO.     

Membranes with Fast and Selective Gas‐Transport Channels of Laminar Graphene Oxide for Efficient CO2 Capture

Graphene oxide (GO) nanosheets were engineered to be assembled into laminar structures having fast and selective transport channels for gas separation. With molecular‐sieving interlayer spaces and straight diffusion pathways, the GO laminates endowed as‐prepared membranes with excellent preferential CO₂ permeation performance (CO₂ permeability: 100 Barrer, CO₂/N₂ selectivity: 91) and extraordinary operational stability (>6000 min), which are attractive for implementation of practical CO₂ capture.     

Influence of activated carbon in zeolite X/activated carbon composites on CH<Subscript>4</Subscript>/N<Subscript>2</Subscript> adsorption separation ability

A series of zeolite X/activated carbon composites with different ratio of zeolite X and activated carbon were prepared, which were adjusted by adding solid pitch powder and silicon dioxide as additional carbonaceous and silica source, respectively. The corresponding modified samples were obtained by treatment with the ammonium chloride solution. CH₄ and N₂ adsorption isotherms on all composites were determined within the pressure of 0–100 kPa at 298 K, and fitted with Henry model and Freundlich model. The results showed the adsorption separation abilities for CH₄ and N₂ were strongly influenced by activated carbon content, micropore structure and surface properties. The increase of activated carbon content increased the BET surface area, micropore surface area and micropore volume, leading to an enhanced CH₄ adsorption capacity and CH₄/N₂ adsorption selectivity. Compared with the unmodified composites, the modified composites showed higher CH₄/N₂ adsorption selectivity, and CH₄ adsorption capacity decreased slightly, which can be attributed to the reduction of the micropore structure parameters, the surface basic amount and basic strength. Furthermore, the modified composite HAX-3 presented the highest CH₄/N₂ selectivity of 3.4, and high CH₄ adsorption capacities, which is favorable for application in pressure swing adsorption processes.     

Selective methanation of CO in the presence of CO<Subscript>2</Subscript> in hydrogen-containing mixtures on nickel catalysts

The screening of commercial nickel catalysts for methanation and a series of nickel catalysts supported on CeO₂, γ-Al₂O₃, and ZrO₂ in the reaction of selective CO methanation in the presence of CO₂ in hydrogen-containing mixtures (1.5 vol % CO, 20 vol % CO₂, 10 vol % H₂O, and the balance H₂) was performed at the flow rate WHSV = 26000 cm³ (g Cat)⁻¹ h⁻¹. It was found that commercial catalytic systems like NKM-2A and NKM-4A (NIAP-07-02) were insufficiently effective for the selective removal of CO to a level of <100 ppm. The most promising catalyst is 2 wt % Ni/CeO₂. This catalyst decreased the concentration of CO from 1.5 vol % to 100 ppm in the presence of 20 vol % CO₂ in the temperature range of 280–360°C at a selectivity of >40%, and it retained its activity even after contact with air. The minimum outlet CO concentration of 10 ppm at 80% selectivity on a 2 wt % Ni/CeO₂ catalyst was reached at a temperature of 300°C.