Studies on solid-state polymer composite electrolyte of nano-silica/hyperbranched poly(amine-ester)

A new solid-state polymer composite electrolyte based on hypergrafted nano-silica (SiO₂-g-HBPAE)/hyperbranched poly (amine-ester) (HBPAE) doped with lithium perchlorate (LiClO₄) was studied in this paper. The N,N-diethylol-3-amine-2-methyl methylpropionate monomer was firstly synthesized by methyl methacrylate (MMA) and diethanolamine through Michael addition reaction and then self-condensed on the surface of nano-silica pretreated by 3-aminopropyltriethoxysilane (APTES) and MMA. The synthetic procedure of the monomers and SiO₂-g-HBPAE/HBPAE was traced by fluorescence spectra. The size and grafting ratio of SiO₂-g-HBPAE were characterized by transmission electron microscopy, static light scattering and thermogravimetric analysis. Incorporating SiO₂-g-HBPAE to HBPAE could not only decrease the glass transition temperature of polymer according to the differential scanning calorimetry characterization, but also increase the elastic and viscosity modules indicated by rheological measurement results. Electrochemical properties of SiO₂-g-HBPAE/HBPAE/LiClO₄ were also investigated. The conductivity of SiO₂-g-HBPAE/HBPAE with 50 wt% LiClO₄ reached 1.4?×?10^?5 S/cm at 30 °C and 10^?3 S/cm at 100 °C. The lithium-ion transference number of synthesized hyperbranched electrolyte can be up to 0.55.     

The network gel polymer electrolyte based on poly(acrylate-co-imide) and its transport properties in lithium ion batteries

Poly (acrylate-co-imide)-based gel polymer electrolytes are synthesized by in situ free radical polymerization. Infrared spectroscopy confirms the complete polymerization of gel polymer electrolytes. The ionic conductivity of gel polymer electrolytes are measured as a function of different repeating EO units of polyacrylates. An optimal ionic conductivity of the poly (PEGMEMA₁₁₀₀-BMI) gel polymer electrolyte is determined to be 4.8 × 10^–3 S/cm at 25 °C. The lithium transference number is found to be 0.29. The cyclic voltammogram shows that the wide electrochemical stability window of the gel polymer electrolyte varies from −0.5 to 4.20 V (vs. Li/Li⁺). Furthermore, we found the transport properties of novel gel polymer electrolytes are dependent on the EO design and are also related to the rate capability and the cycling ability of lithium polymer batteries. The relationship between polymer electrolyte design, lithium transport properties and battery performance are investigated in this research.     

Effect of ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide on the properties of poly(glycidyl methacrylate) based solid polymer electrolytes

A free standing polymer electrolytes films, containing poly(glycidyl methacrylate) (PGMA) as the polymer host, lithium perchlorate (LiClO₄), and ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl) imide [Bmim][TFSI] as a plasticizer was successfully prepared via the solution casting method. The XRD analysis revealed the amorphous nature of the electrolyte. ATR-FTIR and thermal studies confirmed the interaction and complexation between the polymer host and the ionic liquid. The maximum ionic conductivity of the solid polymer electrolyte was found at 2.56 × 10^–5 S cm^–1 by the addition of 60 wt % [Bmim][TFSI] at room temperature and increased up to 3.19 × 10^–4 S cm^–1 at 373 K, as well as exhibited a transition of temperature dependence of conductivity: Arrhenius-like behavior at low and high temperatures.     

Electrospun octa(3-chloropropyl)-polyhedral oligomeric silsesquioxane-modified polyvinylidene fluoride/poly(acrylonitrile)/poly(methylmethacrylate) gel polymer electrolyte for high-performance lithium ion battery

Gel polymer electrolyte (GPE) based on octa(3-chloropropyl)-polyhedral oligomeric silsesquioxane (OCP-POSS)-modified polyvinylidene fluoride/poly(acrylonitrile) /poly(methylmethacrylate) (PVDF/PAN/PMMA) fibrous membrane was prepared by electrospinning method to improve the thermal stability of GPE and prevent the leakage of liquid electrolyte for lithium ion battery. The effect of OCP-POSS content on the morphology, porosity and electrolyte uptake, mechanical strength, thermal stability of spinning fibrous membrane and ionic conductivity, electrochemical stability window, and interface resistance of GPE was investigated. The cycle performance of cells assembled with GPE was also tested. The results show that the spinning fibrous membrane with 10 wt% OCP-POSS possesses high electrolyte uptake (660%) and excellent thermal stability. The ionic conductivity of corresponding GPE is 9.23 × 10^?3 S cm^?1 at room temperature and the electrochemical stability window is up to 5.82 V; the interface resistance of 10 wt% OCP-POSS modified GPE decreases by 42% after 168 h compared with pure PVDF/PAN/PMMA GPE. Furthermore, cells assembled with 10 wt% OCP-POSS modified GPE show high discharge capacity (166.5 mA h g^?1 at 0.1 C) and excellent cycle stability during 50 cycles. The results indicate that the GPE could improve the safety of lithium ion battery and show great potential in lithium ion battery applications.     

Sol-gel derived Li+-doped poly(ε-caprolactone)/siloxane biohybrid electrolytes

Electrolytes based on a poly(ε-caprolactone) (PCL)/siloxane organic/inorganic host framework doped with lithium triflate (LiCF₃SO₃) were synthesised through the sol-gel process. In this biohybrid matrix short PCL chains are covalently bonded via urethane linkages to the siliceous network. Samples with salt composition n (molar ratio of PCL repeat units per Li⁺ ion) ranging from ∞ to 0.5 were investigated. All the ormolyte materials analyzed are amorphous. Xerogels with n > 0.5 are thermally stable up to about 300°C. The most conducting ormolyte of the series is that with n = 0.5 (1.6×10⁻⁷ and 3.2×10⁻⁵ Ω⁻¹ cm⁻¹ at 25 and 100°C, respectively). This sample is electrochemically stable between −1 and 6 V versus Li⁺.     

Magnesium ion transport in poly(ethylene oxide)-based polymer electrolyte containing plastic-crystalline succinonitrile

A new composition of magnesium (Mg)-ion-conducting polymer electrolyte comprising poly(ethylene oxide) (PEO) complexed with Mg trifluoromethanesulfonate (Mg triflate or Mg(Tf)₂) containing different amounts of a nonionic plastic crystal succinonitrile (SN) has been prepared and characterized. High polarity and rotational disorder of the SN molecules in the plastic-crystalline phase, supports the enhancement of ionic conductivity of the PEO-Mg(Tf)₂ complex system, showing a maximum room temperature ionic conductivity of ～6?×?10^-4 S cm^?1 observed with the addition of 50 wt.% of SN. X-ray diffraction, optical microscopy, and differential scanning calorimetry suggest a substantial structural modification, decrease in crystallinity, and various interactions in the polymer electrolyte components due to addition of SN. The cyclic voltammetry, impedance, and dc polarization studies confirm the Mg-ion conduction in the PEO complex. The electrochemical potential window of the electrolyte, observed from the linear sweep voltammetry, is determined to be ～4.1 V. The performance characteristics of the SN-incorporated polymer electrolyte system indicate their potential applicability as electrolytes in ionic devices including Mg batteries.     

Improving electrochemical performance of poly(vinyl butyral)-based electrolyte by reinforcement with network of ceramic nanofillers

This study has concerned the development of polymer composite electrolytes based on poly(vinyl butyral) (PVB) reinforced with calcinated Li/titania (CLT) for use as an electrolyte in electrochemical devices. The primary aim of this work was to verify our concept of applying CLT-based fillers in a form of nano-backbone to enhance the performance of a solid electrolyte system. To introduce the network of CLT into the PVB matrix, gelatin was used as a sacrificial polymer matrix for the implementation of in situ sol–gel reactions. The gelatin/Li/titania nanofiber films with various lithium perchlorate (LiClO₄) and titanium isopropoxide proportions were initially fabricated via electrospinning, and ionic conductivities of electrospun nanofibers were then examined at 25 °C. In this regard, the highest ionic conductivity of 2.55 × 10⁻⁶ S/cm was achieved when 10 wt% and 7.5 wt% loadings of LiClO₄ and titania precursor were used, respectively. The nanofiber film was then calcined at 400 °C to remove gelatin, and the obtained CLT film was then re-dispersed in solvated PVB-lithium bis(trifluoromethanesulfonyl)imide (PVB-LiTFSI) solution before casting to obtain reinforced composite solid electrolyte film. The reinforced composite PVB polymer electrolyte film shows high ionic conductivity of 2.22 × 10⁻⁴ S/cm with a wider electrochemical stability window in comparison to the one without nanofillers.

     

Synthesis,electrolyte properties and solar cell performance of hyperbranched poly(aryl-ether-urea)s

Hyperbranched poly(aryl-ether-urea)s with phenyl, N,N-dimethylamino ethyl and polyethylene oxide end-groups linked through urethane group – HBPEU-1, HBPEU-2 and HBPEU-3 respectively – were synthesized from an AB₂-type blocked isocyanate monomer and characterized by FT-IR, ¹H-NMR, SEC-MALLS, TGA and DSC techniques. The molecular weight of the polymers were found to be ranged from 4.9 × 10³ ? 1.96 × 10⁴ g/mol. The TGA results showed that the polymers decompose between 175°C – 220°C. In the DSC curves, HBPEU-1 and HBPEU-3 showed T_g at 160°C and 53°C respectively, whereas HBPEU-2 did not showed clear T_g. All the three polymers were converted into polymer electrolytes by doping with LiI/I₂. The doped polymers showed remarkably high ionic conductivity, up to 222 – 277 times compared to the un-doped polymers and the highest conductivity was observed with doped HBPEU-2. The TiO₂ based dye-sensitized solar cells (DSSCs) were fabricated using the doped polymer electrolytes and their performance was tested; HBPEU-2 showed good performance by yielding energy conversion efficiency (η) of 4.5%.     

Polyethylene-supported poly(acrylonitrile-co-methyl methacrylate)/nano-Al2O3 microporous composite polymer electrolyte for lithium ion battery

Nano-Al₂O₃ was doped in poly(acrylonitrile-co-methyl methacrylate) (P(AN-co-MMA)), and polyethylene(PE)-supported P(AN-co-MMA)/nano-Al₂O₃ microporous composite polymer electrolyte (MCPE) was prepared. The performances of the prepared MCPE for lithium ion battery use, including ionic conductivity, electrochemical stability, interfacial compatibility, and cyclic stability, were studied by scanning electron spectroscopy, linear sweep voltammetry, and electrochemical impedance spectroscopy. It is found that the nano-Al₂O₃ significantly affects the MCPE performances. Compared to the MCPE without any nano-Al₂O₃, the MCPE with 10 wt.% nano-Al₂O₃ reaches its best performances. Its ionic conductivity is improved from 2.0 × 10⁻³ to 3.2 × 10⁻³ S cm⁻¹, its decomposition potential is enhanced from 5.5 to 5.7 V (vs Li/Li⁺), and its interfacial resistance on lithium is reduced from 520 to 160 Ω cm². Thus, the battery performance is improved.     

Electrospun cellulose acetate/poly(vinylidene fluoride) nanofibrous membrane for polymer lithium-ion batteries

The membranes for gel polymer electrolyte (GPE) for lithium-ion batteries were prepared by electrospinning a blend of poly(vinylidene fluoride) (PVdF) with cellulose acetate (CA). The performances of the prepared membranes and the resulted GPEs were investigated, including scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC), X-ray diffraction (XRD), porosity, hydrophilicity, electrolyte uptake, mechanical property, thermal stability, AC impedance measurements, linear sweep voltammetry, and charge–discharge cycle tests. The effect of the ratio of CA to PVdF on the performance of the prepared membranes was considered. It is found that the GPE based on the blended polymer with CA:PVdF =2:8 (in weight) has an outstanding combination property-strength (11.1 MPa), electrolyte uptake (768.2 %), thermal stability (no shrinkage under 80 °C without tension), and ionic conductivity (2.61 × 10^?3 S cm^?1). The Li/GPE/LiCoO₂ battery using this GPE exhibits superior cyclic stability and storage performance at room temperature. Its specific capacity reaches up to 204.15 mAh g^?1, with embedded lithium capacity utilization rate of 74.94 %, which is higher than the other lithium-ion batteries with the same cathode material LiCoO₂ (about 50 %).     

Ion conductivity studies of blends of poly(methyl methacrylate)-g-poly(ethylene glycol) and poly(ethylene glycol) complexed with LiCF3 SO3

Polymer electrolytes which are adhesive, transparent, and stable to atmospheric moisture have been prepared by blending poly(methyl methacrylate)-g-poly(ethylene glycol) with poly(ethylene glycol)/LiCF₃ SO₃ complexes. The maximum ionic conductivities at room temperature were measured to be in the range of 10⁻⁴ to 10⁻⁵ s cm⁻¹. The clarity of the sample was improved as the graft degree increased for all the samples studied. The graft degree of poly(methyl methacrylate)-g-poly(ethylene glycol) was found to be important for the compatibility between the poly(methyl methacrylate) segments in poly(methyl methacrylate)-g-poly(ethylene glycol) and the added poly(ethylene glycol), and consequently, for the ion conductivity of the polymer electrolyte. These properties make them promising candidates for polymer electrolytes in electrochromic devices. © 1996 John Wiley & Sons, Inc.     

Synthesis and characterization of poly(ethylene glycol amine) electrolytes and nanocomposites based on graphite

Poly(ethylene glycol) functionalized with an amino group (PEG-amine) was synthesized and characterized by proton NMR and FTIR spectroscopy. The polymer was complexed with lithium triflate (LiOTf) in varying ratios, and it was found that the composition (PEG-amine)_8.0LiOTf exhibited a maximum ionic conductivity of 10^?5 S/cm at a temperature of 320 K. Graphite platelets were also dispersed into the polymer matrix, and the resulting nanomaterials were shown to be electrically conductive, with a maximum value of 1 × 10³ S/cm when the graphite is present at 50% by mass.     

Ion-free latex films composed of fused polybutadiene and poly (vinyl pyrrolidone) particles as polymer electrolyte materials

Latex films composed of fused polybutadiene (PB) and poly (vinyl pyrrolidone) (PVP) particles that contain no ionic, hydroxyl, or amino groups were swelled with lithium salt solutions to yield new polymer electrolyte materials. The latex particle consists of a nonpolar, rubbery core that contains the PB component and a polar, glassy shell that contains the PVP component. The particle core-shell morphology was retained in the solid state, after the latex dispersion medium was removed and the films dried at high temperatures, due to the high T_g of the PVP shell. The films swelled when immersed in lithium salt solutions, and ionic conductivity of swollen films was greater than 10^-3 S/cm. Swelling and ionic conduction occurred only in the polar PVP component. Extraction of PVP occurred with extended swelling. © 1994 John Wiley & Sons, Inc.     

Effects of lithium salt and poly(4‐vinyl phenol) on crystalline and amorphous phases in poly(ethylene oxide)

Effects of a strong‐interacting amorphous polymer, poly(4‐vinyl phenol) (PVPh), and an alkali metal salt, lithium perchlorate (LiClO₄), on the amorphous and crystalline domains in poly(ethylene oxide) (PEO) were probed by differential scanning calorimetry (DSC), optical microscopy (OM), and Fourier transform infrared spectroscopy (FTIR). Addition of lithium perchlorate (LiClO₄, up to 10% of the total mass) led to enhanced T_g's, but did not disturb the miscibility state in the amorphous phase of PEO/PVPh blends, where the salt in the form of lithium cation and ClO anion was well dispersed in the matrix. Competitive interactions between PEO, PVPh, and Li⁺ and ClO ions were evidenced by the elevation of glass transition temperatures and shifting of IR peaks observed for LiClO₄‐doped PEO/PVPh blend system. However, the doping distinctly influenced the crystalline domains of LiClO₄‐doped PEO or LiClO₄‐doped PEO/PVPh blend system. LiClO₄ doping in PEO exerted significant retardation on PEO crystal growth. The growth rates for LiClO₄‐doped PEO were order‐of‐magnitude slower than those for the salt‐free neat PEO. Dramatic changes in spherulitic patterns were also seen, in that feather‐like dendritic spherulites are resulted, indicating strong interactions. Introduction of both miscible amorphous PVPh polymer and LiClO₄ salt in PEO can potentially be a new approach of designing PEO as matrix materials for electrolytes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3357–3368, 2006     

Composite poly(ethylene carbonate) electrolytes with electrospun silica nanofibers

We prepared a ternary composite polymer electrolyte from poly(ethylene carbonate) (PEC), lithium bis(trifluoromethanesulfonyl) imide (LiTFSI) and non‐calcined silica nanofibers (SNFs) having 3 average diameters (300, 700, and 1000 nm). The SNF composite electrolytes were obtained as homogeneous, self‐standing membranes. The ionic conductivity of PEC/LiTFSI 100 mol% was increased by the addition of SNFs, and the thinner SNFs with average diameter 300 nm were most effective in improving the conductivity. The conductivity was of the order of 10⁻⁴ S/cm at 60°C. The lithium transference number of the SNF₃₀₀ composite was greater than 0.7. Stress‐strain curves of the composites indicated significant increases in Young's modulus and maximum stress for the PEC electrolytes. The 5% weight‐loss temperature of the composites also improved with the addition of SNF.     

Ionic conductivity and compatibility studies of blends of poly(methyl methacrylate) and poly(propylene glycol) complexed with LICF3SO3

Stable to atmospheric moisture, adhesive and transparent polymer electrolytes have been prepared by blending poly(methyl methacrylate) (PMMA) with poly(propylene glycol)-425/LiCF₃SO₃ complexes. The blending of the polymers has been achieved by a method developed in our laboratory: free radical polymerization of methylmethacrylate in the polyether/salt matrix. A series of polymer blend complexes varying in PMMA content (up to 20% by weight) and oxygen/metal ratios (25, 16, and 8) have been synthesized and their properties studied. All the samples prepared in this study were found to be optically clear unlike the higher molecular weight poly(propylene glycol)-2000 (PPG-2000) system which required a minimum salt concentration to compatibilize a specific amount of PMMA with PPG. The mechanisms by which the salt holds the otherwise incompatible polymers together in a single phase have been investigated by FT-IR. Our studies show a weak coupling of the ether oxygens in the PPG with the ester groups of the PMMA through the lithium cations. Discrete changes has been observed in the FT-IR spectrum of PMMA when doped with the lithium salt hitherto unnoticed with other dopants. Gel permeation chromatography results of the PMMA samples isolated from the solid electrolytes indicate the molecular weight to vary between 43000 and 121000 with relatively narrow distributions, 1.6?2.0. The ionic conductivities of the polymer blend electrolytes were fairly high (10^?5 S/cm) at room temperature. The PMMA neither significantly influenced the T_g of the blend complexes nor effected the ionic conductivities drastically. The ionic conductivity as a function of temperature followed the empirical Vogel-Tammann-Fulcher equation. The blending of PMMA with PPG/LiCF₃SO₃ complexes was found to impart good adhesiveness to the solid electrolytes while making them stable to atmospheric moisture. © 1992 John Wiley & Sons, Inc.     

Conductivity and thermal behavior of proton conducting polymer electrolyte based on poly (N-vinyl pyrrolidone)

The polymer electrolytes based on poly N-vinyl pyrrolidone (PVP) and ammonium thiocyanate (NH₄SCN) with different compositions have been prepared by solution casting technique. The amorphous nature of the polymer electrolytes has been confirmed by XRD analysis. The shift in T_g values and the melting temperatures of the PVP-NH₄SCN electrolytes shown by DSC thermo-grams indicate an interaction between the polymer and the salt. The dependence of T_g and conductivity upon salt concentration have been discussed. The conductivity analysis shows that the 20 mol% ammonium thiocyanate doped polymer electrolyte exhibit high ionic conductivity and it has been found to be 1.7 × 10⁻⁴ S cm⁻¹, at room temperature. The conductivity values follow the Arrhenius equation and the activation energy for 20 mol% ammonium thiocyanate doped polymer electrolyte has been found to be 0.52 eV.     

Polymer electrolyte membranes by in situ polymerization of poly(ethylene carbonate‐co‐ethylene oxide) macromonomers in blends with poly(vinylidene fluoride‐co‐hexafluoropropylene)

Salt‐containing membranes based on polymethacrylates having poly(ethylene carbonate‐co‐ethylene oxide) side chains, as well as their blends with poly(vinylidene fluoride‐co‐hexafluoropropylene) (PVDF‐HFP), have been studied. Self‐supportive ion conductive membranes were prepared by casting films of methacrylate functional poly(ethylene carbonate‐co‐ethylene oxide) macromonomers containing lithium bis(trifluorosulfonyl)imide (LiTFSI) salt, followed by irradiation with UV‐light to polymerize the methacrylate units in situ. Homogenous electrolyte membranes based on the polymerized macromonomers showed a conductivity of 6.3 × 10^?6 S cm^?1 at 20 °C. The preparation of polymer blends, by the addition of PVDF‐HFP to the electrolytes, was found to greatly improve the mechanical properties. However, the addition led to an increase of the glass transition temperature (T_g) of the ion conductive phase by ～5 °C. The conductivity of the blend membranes was thus lower in relation to the corresponding homogeneous polymer electrolytes, and 2.5 × 10^?6 S cm^?1 was recorded for a membrane containing 10 wt % PVDF‐HFP at 20 °C. Increasing the salt concentration in the blend membranes was found to increase the T_g of the ion conductive component and decrease the propensity for the crystallization of the PVDF‐HFP component. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 79–90, 2007     

Salt‐induced microphase separation of amorphous dendritic poly(ethylene oxide)‐block‐linear polystyrene copolymers

We prepared two block copolymers 1 and 2 consisting of a third‐generation dendron with poly(ethylene oxide) (PEO) peripheries and a linear polystyrene (PS) coil. The PS molecular weights were 2000 g/mol and 8000 g/mol for 1 and 2 , respectively. The differential scanning calorimetry (DSC) data indicated that neither of the block copolymers showed glass transition, implying that there was no microphase separation between the PEO and PS blocks. However, upon doping the block copolymers with lithium triflate (lithium concentration per ethylene oxide unit = 0.2), two distinct glass transitions were seen, corresponding to the salt‐doped PEO and PS blocks, respectively. The morphological analysis using small angle X‐ray scattering (SAXS) and transmission electron microscopy (TEM) demonstrated that a hexagonal columnar morphology was induced in salt‐doped sample 1‐Li⁺ , whereas the other sample ( 2‐Li⁺ ) with a longer PS coil revealed a lamellar structure. In particular, in the SAXS data of 2‐Li⁺ , an abrupt reduction in the lamellar thickness was observed near the PS glass transition temperature (T_g), in contrast to the SAXS data for 1‐Li⁺ . This reduction implies that there is a lateral expansion of the molecular section in the lamellar structure, which can be interpreted by the conformational energy stabilization of the long PS coil above T_g. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2372–2376, 2010     

Enhanced ionic conductivity in novel nanocomposite gel polymer electrolyte based on intercalation of PMMA into layered LiV3O8

In the present work, a novel polymer electrolyte based on poly(methyl methacrylate) (PMMA)/layered lithium trivanadate (LiV₃O₈) nanocomposite has been investigated. X-ray diffraction (XRD) study shows that d-spacing is increased from 6.3?±?0.1 Å to 12.8?±?0.1 Å upon intercalation of the polymer into the layered LiV₃O₈. Room temperature ionic conductivity of the obtained nanocomposite gel polymer electrolyte is found to be superior to that of conventional PMMA-based gel polymer electrolyte. Enhancement in ionic conductivity of the nanocomposite gel electrolyte is attributed to the formation of a two-dimensional channel as a result of decreased interaction between Li⁺ and V₃O ₈ ^? layers as confirmed by FTIR. SEM results show aggregation of nanocomposite particles resulting from extension of some of the polymer chains from interlayer to the edge providing paths for Li⁺ ion transport. Interfacial stability of nanocomposite gel electrolyte is also found to be better than that of the conventional PMMA-based gel polymer electrolyte.