First metal complex with the azulene dianion. Molecular structure of the (2η1:η2-Gaz)Lu(η5-Cp)(DME) complex (Gaz is 7-isopropyl-1,4-dimethylazulene)

The metallocene derivative (2¹:²-Gaz)Lu(⁵-Cp)(DME) (1) (Gaz is 7-isopropyl-1,4-dimethylazulene) was prepared by reduction of guaiazulene with the lutetium naphthalene complex (⁵-Cp)Lu(2¹:²-C₁₀H₈)(DME) in 1,2-dimethoxyethane (DME). Complex 1 crystallized from a solution as blue crystals. According to the results of X-ray diffraction analysis, molecule 1 has a skewed pseudo-sandwich structure in which the Lu atom is ⁵-coordinated by the cyclopentadienyl ring and 2¹:²-coordinated by the seven-membered ring of the guaiazulene ligand. The coordination sphere of the metal atom in complex 1 is completed with the chelating DME molecule.     

Inter-ring η6⇌η5 haptotropic rearrangements of 18ē and 19ē (η5-pentamethylcyclopentadienyl)(η6-9-methylfluorenyl)iron complexes

New cationic complexes [(⁶-C₁₃H₁₀)Fe(⁵-Cp^*)]PF₆ and [(⁶-9-CH₃-C₁₃H₉)Fe(⁵-Cp^*)]PF₆ were obtained by the reaction of Cp^*Fe(CO)₂Br with fluorene and 9-methylfluorene, respectively. Deprotonation of these complexes byt-BuOK in THF affords zwitter-ionic compounds (⁶-C₁₃H₉)Fe(⁵-Cp^*) and (⁶-9-CH₃-C₁₃H₈)Fe(⁵-Cp^*) (A). WhenA is heated in nonane at 150 °C it undergoes ⁶⁵ inter-ring rearrangement with the formation of hexamethyldibenzoferrocene (B). The electrochemical behavior ofA andB was studied by cyclic voltammetry. One-electron reduction ofA andB to the corresponding radical anions induces inter-ring haptotropic rearrangementA ^.–B ^.–. The equilibrium in the 19 state is shifted to the ⁶-isomeric radical anionA ^.–, while in the 18 precursors, it shifts to the ⁵-isomerB.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 319–324, February, 1994.The authors are grateful to D. V. Zagorevskii (A. N. Nesmeyanov Institute of Organoelement Compounds, Russian Academy of Sciences) for recording and interpreting the mass spectra, and to A. A. Borisenko (Moscow State University) for recording the NMR spectra.This work was financially supported by the Russian Foundation for Basic Research (Grant 93-03-5209).     

The catalytic system [(Cp2TiCl)2]:LiAlH4 in aromatic solvents,Part II. Formation of η3-allyltitanocene derivatives in the presence of dienes — their structure and e.s.r. spectra

Summary The addition of dienes to the system [(Cp₂TiCl)₂] LiAlH₄toluene changes the system so that the complex [Cp₂TiAlH₄] is quantitatively formed instead of a titanocene hydride — aluminium hydride cluster. The complex [Cp₂TiAlH₄] is further converted into ³-allyltitanocene derivatives ([Cp₂TiA]) if the diene structure is suitable for formation of stable [Cp₂TiA] compounds and if the equilibrium [Cp₂TiAlH₄]+diene[Cp₂TiA]+A1H₃ is shifted towards the formation of [Cp₂TiA] by the excess of diene. All the compounds [Cp₂TiA] exhibit high-resolution e.s.r. spectra at g=1.993, showing interaction of the unpaired electron with the cyclopentadienyl and ³-allyl protons. The e.s.r. spectra clearly reveal the presence of alkyl substituents atsyn-1,3-positions of ³-allyl ligand, and show a triplet of multiplets for (³-allyl)titanocene, doublets of multiplets for (1-alkyl-³-allyl)titanocenes and single multiplets for (1,3-dialkyl-³-allyl)-titanocenes. thermal isomerization of (1,3-dimethyl-³-allyl)-titanocene and (1-methyl-3-ethyl-³-allyl)titanocene, hitherto considered as the stable Cp₂TiA compounds, into (1-alkyl-³-allyl)titanocenes was confirmed by e.s.r. and electronic absorption spectroscopy as well as by chemical means.     

Synthesis and crystal structure of [(η3-C3H5)(CO)2Mo(μ-S2CPCy3)-Mo(η3-CH2CMeCH2)(CO)2]

A novel dimolybdenum complex [(³-C₃H₅)(CO)₂Mo(-S₂CPCy₃)Mo(³-CH₂CMeCH₂)(CO)₂], obtained by reacting the [(CO)₂(³-C₃H₅)Mo(-S₂CPCy₃)Mo(CO)₃]^– anion with an excess of ClCH₂CMe=CH₂, has been characterized by i.r., ³¹P{¹H}, ¹H- and ¹³C-n.m.r. spectroscopy and by elemental analysis. The crystal structure of the complex, determined by X-ray diffraction, shows a definite preference for the central carbon of the S₂CPCy₃ bridge to bind to the Mo(2) atom coordinated by ³-2-methylallyl, rather than the Mo(1) atom attached to unsubstituted ³-allyl ligand.     

Investigation of the redox properties of polynuclear “ladder” complexes containing Cr,Mn, and Fe

The redox potentials of new Cr, Mn, and Fe polynuclear ladder complexes, (⁵-Cp)Fe(CO)₂(¹,⁵-C₅H₄)Fe(CO)₂(¹,⁵-C₅H₄)Mn(CO)₃, (⁵-Cp)Fe(CO)₂(¹,⁵-C₅H₄)Mn(CO)₃, (⁵-Cp)Fe(CO)₂(¹,⁶-Ph)Cr(CO)₃, (⁵-Cp)Fe(CO)₂(¹,⁵-C₅H₄)Fe(CO)₂CH₂Ph, (⁵-Cp)Fe(CO)₂(¹,⁶-CH₂Ph)Cr(CO)₃, were measured and the mechanism of their electrochemical oxidation and reduction was suggested. It was shown that the - or -bonds of the bridging ligand can be cleaved selectively by applying cathodic or anodic potentials, respectively. On the basis of the obtained electrochemical data, a mechanism is suggested for the rearrangement observed when the complexes are metallated by butyllithium.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 362–366, February, 1995.This work was carried out with financial support from the Russian Foundation for Basic Research (Project No 94-03-08628a).     

Lithium and lanthanum complexes with acenaphthylene dianion. Molecular structure of [Li(Et2O)2]2μ2:η3[Li(η3:η3-C12H8)]2 complex

The lithium complex with the acenaphthylene dianion [Li(Et₂O)₂]₂₂:³[Li(³:³-C₁₂H₈)]₂ (1) was synthesized by the reduction of acenaphthylene with lithium in diethyl ether. According to the X-ray diffraction data, compound 1 has a reverse-sandwich structure with the bridging dianion ₂:³[Li(³:³-C₁₂H₈)]₂. Two lithium atoms in complex 1 are located between two coplanar acenaphthylene ligands of the ₂:³[Li(³:³-C₁₂H₈)]₂ ^2– dianion and are ³-coordinated with the five- and six-membered rings. The lanthanum complex with the acenaphthylene dianion [LaI₂(THF)₃]₂(₂-C₁₂H₈) (2) was synthesized by the reduction of acenaphthylene in THF with the lanthanum(iii) complex [LaI₂(THF)₃]₂(₂-C₁₀H₈) containing the naphthalene dianion. The ¹H NMR spectrum of complex 2 in THF-d₈ exhibits four signals of the acenaphthylene dianion, whose strong upfield shifts compared to those of free acenaphthylene indicate the dianionic character of the ligand. The highest upfield chemical shift belongs to the proton bound to the C atom on which, according to calculation, the maximum negative charge is concentrated.     

Tetramethyl(2-methoxyethyl)cyclopentadienyl complexes of zirconium(iv). Crystal structure of [η5:η1−C5(CH3)4(CH2CH2OCH3)]ZrCl3

Several novel zirconium(iv) complexes with the chelating oxygen-containing cyclopentadienyl ligand, tetramethyl(2-methoxyethyl)cyclopentadiene, have been synthesized. [⁵:¹-Tetra-methyl(2-methyl)cyclopentadienyl]trichlorozirconium (2), bis[⁵-tetramethyl(2-methoxyethyl)cyclopentadienyl]dichlorozirconium (3), [⁵-pentamethylcyclopentadienyl][⁵-tetra-methyl(2-methoxyethyl)cyclopentadienyl]dichlorozirconium (4), and [⁵-tetra-methyl(2-methylthioethyl)cyclopentadienyl][⁵-tetramethyl(2-methoxyethyl)-cyclopentadienyl]dichlorozirconium (5) have been prepared from the corresponding lithium cyclopentadienide (l). The crystal structure of cyclopentadienyl complex2 has been established by X-ray analysis. The coordination OZr bond in compound2 exists both in the crystalline state and in solutions. No coordination of this type was observed in complexes3–5. Synthesized complexes2–5 are discussed in comparison with their sulfur-containing analogs.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1828–1832, July, 1996.     

Preparation and Microstructural and Textural Characterization of Single-Phase Aluminum Oxides

Conditions for the preparation of single-phase -, -, and -aluminas were determined. The structures of - and -aluminas were characterized. With the use of high-resolution electron microscopy, it was found that -Al₂O₃ particles exhibited the most developed {111} face and consisted of coherently joined domains with a pronounced platelet shape. Planar defects in the (111) plane occurred in the -Al₂O₃ particles. Microstructural differences between single-phase -Al₂O₃ and -Al₂O₃ with a defect spinel structure were revealed. It was found that the -Al₂O₃, -Al₂O₃, and -Al₂O₃ oxides are characterized by uniformly porous structures with average pore diameters of 47, 55, and 110 Å, respectively.     

Ruthenium clusters containing the [2.2] paracyclophane ligand: Recent developments in arene-cluster chemistry

In this article we review the synthesis, reactivity, and characterization of a number of clusters bearing the [2.2] paracyclophane ligand with nuclearities ranging from two to eight. Particular attention is focused on the different coordination modes that paracyclophane adopts; these being µ₁- ⁶, µ₂- ³ : ³, µ₃- ¹ : ² : ², and µ₃- ² : ² : ². Structural modifications which take place within the ring system on bonding in these various modes are also discussed.     

A New Relation Between the Maxima Conductivities of Nonaqueous Concentrated Electrolytes and Chemical Hardness of Solvents and Salts

For nonaqueous electrolytes, using the HSAB principle, we tried to correlate the conductivity maxima _MAX, vs. only two intrinsic parameters: chemical hardness of the solvent and that of the salt. Thus, not only the nature of the solvent but also that of the salt were taken into account. We were able to predict for a given solvent the variation of _MAX as a function of the hardness of the salt and that of the solvent: _MAX = K(1 – ||/_SOLVENT) with || = |_SOLVENT – _SALT| and K a constant in S-cm^–1 independent of the salt, but not of the solvent.     

Heterobinuclear and heterotrinuclear transition-metal μ-allenyl complexes

Binuclear and trinuclear transition-metal -allenyl complexes—especially mixedmetal complexes—are reviewed. In recent years, a number of such compounds have been prepared by use of several synthetic methods. The most general of these methods, viz. reactions of metal propargyls and of the lower nuclearity metal allenyls with low-valent metal complexes such as metal carbonyls and platinum(0) compounds, are considered in some detail. The structures of the binuclear metal -¹,²- and -³,²-allenyl complexes and of the trinuclear metal ₃-¹,²,²-allenyl complexes—both triangular and open—are presented and compared. Trends in the¹H and¹³C NMR spectroscopic properties of these compounds are examined. Some aspects of reaction chemistry of the heteronuclear platinum-ruthenium -¹,²-allenyl complexes are presented.     

Reaction of ruthenium carbonylcarbide cluster Ru6C(CO)17 with nickelocene and pentamethylcyclopentadiene

The reaction of cluster Ru₆C(CO)₁₇ (1) with nickelocene is studied. Five CO ligands rather than a metal-ligand crown are substituted for two cyclopentadienyl groups to give a new complex Ru₆C(⁵-Cp)₂(CO)₁₂ (2). The reaction of cluster1 with entamethylcyclopentadiene leads to new complex Ru₆C(-¹⁵-CH₂C₅Me₄)(CO)₁₄ (3) containing the cr-bond CH₂-Ru, along with an ⁵-coordinated cyclopentadienyl ring.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1171–1172, June, 1995.     

Electron density distribution in vanadocene (η5-C5H5)2V and mixed metallocenes (η5-C5H5)M(η5-C7H7) (M = Ti,V, or Cr) and (η5-C5H5)Ti(η8-C8H8). Effect of the nature of the cyclic ligand on the character of the M--(π-ligand) bond

The electron density distribution and atomic displacements were analyzed based on the results of precision low-temperature X-ray diffraction studies of a series of isostructural (Pnma, Z = 4) mixed metallocenes (⁵-C₅H₅)M(⁵-C₇H₇) (M = Ti, V, or Cr) and (⁵-C₅H₅)Ti(⁸-C₈H₈). The barriers to rotation of the cyclic ligands were evaluated based on rms libration amplitudes. Analysis of the deformation electron density demonstrated that the character of the M--(-ligand) chemical bond depends substantially both on the nature of the metal atom and the size of the ligand. Lowering of the local symmetry of the (⁵-C₅H₅)M(⁵-C₇H₇) complexes to C_S leads to distortion of the cylindrical symmetry of the electron density distribution observed in vanadocene (⁵-C₅H₅)₂V and titanocene (⁵-C₅H₅)Ti(⁸-C₈H₈).     

η-Cyclopentadienyl(nitrosyl)iron complexes containing group VA donors

Summary [(-C₅H₅)Fe(NO)(CO)]₂ and (-C₅H₅)Fe(NO)(CO)I are formed when a slow stream of NO is passed through a benzene solution of [(-C₅H₅)Fe(CO)₂]₂ and (-C₅H₅)Fe(CO)₂ I respectively. Similarly NO reacts with (-C₅H₅)Fe(CO)(Ph₃E)I and [(-C₅H₅)Fe(CO)₂(Ph₃E)]I, where E = P, As and Sb, to give (-C₅H₅)Fe(NO)(Ph₃E)I and [(-C₅H₅)Fe(NO)₂(Ph₃E)]I respectively. The complexes were characterized by elemental analyses and i.r. spectra.Reprints of this article are not available.     

Reaction of the Binuclear Ruthenium-Platinum Allenyl Complexes (PPh3)2Pt(μ-η1:η2α, β-C(R)=C=CH2)Ru(CO)Cp (R=H, Ph) with (PPh3)AuO3SCF3. The Synthesis and Characterization of a Trimetallic 1:1 Adduct of the Reactants

The reaction of the heterobinuclear metal -allenyl complexes (PPh₃)₂Pt(- ¹: ² _, -C(R)=C=CH₂)Ru(CO)Cp (R=H (1), Ph (2)) with (PPh₃)AuO₃SCF₃ in THF at –78°C to room temperature affords the trimetallic products [(PPh₃)₂Pt( ₂-CO)RuCpAu(PPh₃)( ₃- ¹: ³: ¹-CH₂CCR)]⁺O₃SCF^– ₃ (R=H (3), Ph (4)) in 46 and 55% isolated yield, respectively. The products were characterized by a combination of elemental analysis, FAB mass spectrometry, and IR and ¹H, ¹³C, and ³¹P NMR spectroscopy. The structure of 4 was elucidated by a single-crystal X-ray analysis. The crystal contains discrete trimetallic RuPtAu cations and CF₃SO^– ₃ anions. In the cation, a Pt–Ru bond of 2.7171(6) Å is supported by a semibridging CO and a CH₂CCPh allyl, which is ³-bonded to Ru, and ¹-bonded to each of Pt (through the CPh carbon) and Au (through the central carbon). The Ph₃P–Au–C fragment is close to linear (175.0(2)°), and the coordination environment around Pt is distorted square planar. Complex 3 appears to have the same type of structure as 4 from spectroscopic data.     

Reactivity of 17- and 19-electron organometallic complexes. Formation of bent sandwich 19-electron radical cation complexes of ruthenium and osmium

The redox behavior of sandwich indenyl complexes of the general formula (⁵-C₉H₇)ML (M=Ru and L=⁵-C₉H₇ (1), ⁵-C₅H₅ (2), ⁵-C₅Me₅ (3); M=Os, L=⁵-C₉H₇ (4)) has been studied in THF, MeCN, and CH₂Cl₂ by cyclic voltammetry and controlled potential electrolysis on a Pt electrode in the –85 to +20 °C temperature range. The title complexes have been found to undergo reversible one-electron oxidation to the corresponding radical cations, whose stabilities and reactivities depend on the nature of both the metal and °-ligands and of the nucleophilic properties of the solvent. The fast interaction of the electrogenerated 17-electron radical cations with nucleophiles yields bent sandwich 19-electron radical cations, [(⁵-C₉H₇)M(L)(Nu)]⁺ (Nu = Cl^–, MeCN, or THF), the latter undergoing one-electron oxidation to the corresponding [(⁵-C₉H₇)M(L)(Nu)]²⁺ dications. In the case of Nu=THF, the reaction of the electrogenerated 17-electron radical cations with nucleophiles appears to be reversible. Radical cations [(⁵-C₉H₇)₂M]^+· (M=Ru, Os) have been characterized by ESR spectra.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2394–2399, December, 1995.     

Electrochemical study of allylbenzene and allylcyclohexadienyl complexes of ruthenium

Cyclic voltammetry has been used to study the electrochemical behavior of RuCl(³-C₃H₅)(⁶-C₆H₆) (1), [Ru(PPh₃) · (³-C₃H₅)(⁶-C₆H₆)]BF₄ (2), and Ru(PPh₃)· (³-C₃H₅)(⁵-C₆H₇) (3); the latter was prepared by reacting2 with LiAlH₄. The reduction of1 and2 gives the 19-electron complexes1 ^–. and 2^·, whereas oxidation of3 gives the 17-electron complex3 ^+·. The reactivities of1 ^–·,2 ^·, and3 ^+· are discussed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1126–1128, June, 1993.     

Synthesis of dicationic triple-decker complexes with a central B-cyclohexyl-substituted borole ligand

Stacking reactions of the dicationic fragments [LM]²⁺ (LM = (-C₆H₆)Ru, (-C₆H₃Me₃)Ru, or (-C₅Me₅)Rh) with the complex (-C₅H₅)Co(-C₄H₄BCy) (Cy = cyclo-C₆H₁₁) afforded new dicationic 30-electron triple-decker complexes [(-C₅H₅)Co(-:-C₄H₄BCy)ML](BF₄)₂ containing a cyclohexyl-substituted borole ligand in the central position.     

Synthesis,characterization and crystal structures of heterometallic trinuclear carbonyl sulfido clusters (η5-Cp)MoFeCo- (CO)8(μ3-S) and [(η5-Cp)Mo]2Fe(CO)7(μ3-S)

HFe2Co(CO)9(3-S) reacts with (5-Cp)Mo(CO)3Cl in refluxing THF to give heterometallic trinuclear clusters (5-Cp)MoFeCo(CO)8(3-S) and [(5-Cp)Mo]2Fe(CO)7-(3-S), which have been characterized by elemental analyses, i.r., 1H- and 13C-n.m.r. and X-ray crystal structure determination. An electrophilic addition–elimination sequence is proposed for their formation.     

Reaction of the Hexa-1,3,5-triyne Me3SiC≡CC≡CC≡CSiMe3 with Ru4(CO)13(μ 3-PPh): Parallels with the Chemistry of Alkynes and Diynes

Reaction of Ru₄(CO)₁₃(₃-PPh) (1) with the 1,3,5-hexatriyne Me₃SiCCCCC CSiMe₃ under mild thermal conditions affords initially Ru₄(CO)₁₀(-CO)₂{₄-¹,¹,²-P(Ph)C(CCSiMe₃)C(CCSiMe₃) (2), via the facile formation of a P–C bond in a manner similar to that demonstrated previously with alkynes and diynes. The 62-CVE cluster 2 readily decarbonylates to give crystallographically characterised Ru₄(CO)₁₀(-CO)(₄-PPh){₄-¹,¹,²,²-Me₃SiCCC₂CCSiMe₃} (3). Attempts to further incorporate the pendant alkyne moieties in 3 into the Ru₄ coordination environment were partially successful with Ru₄(CO)₁₀(₄-PPh)(₄-¹,¹,³,³-RC₄R') (4, R/R'=SiMe₃/CCSiMe₃) being formed as a minor product together with the unusual toluene coordinated species Ru₄(CO)₇(⁶-C₆H₅Me)(₄-PPh)(₄-¹,¹,³,³-Me₃SiC₄CCSiMe₄) (5). Cluster 3 reacts with an excess of Me₃SiCCCCCCSiMe₃ to give the open chain cluster Ru₄(CO)₉(₃-PPh){₄-²,²,⁴,⁴,-C₄(CCSiMe₃)(SiMe₃)C₄(CCSiMe₃)₃} (6).