Exosomes are membrane-bound vesicles secreted by cells, and contain various important biological molecules, such as lipids, proteins, messenger RNAs, microRNAs, and noncoding RNAs. Emerging evidence demonstrates that proteomic analysis of exosomes is of great significance in studying metabolic diseases, tumor metastasis, immune regulation, and so forth. However, exosome proteomic analysis has high requirements with regard to the purity of collected exosomes. Here recent advances in the methods for isolating exosomes and their applications in proteomic analysis are summarized.
Graphical abstract
A multichannel chip containing 16 microchambers was developed for fast and sensitive immunoassays. In each chamber, antibody-functionalized nonmagnetic beads were applied as the solid phase to capture target antigens. Four types of IgGs (human, rabbit, chicken, and mouse) could be detected simultaneously by our combining this microchip with a sandwich immunoassay technique. A three-layer chip structure was investigated for integration of multiple processes, including washing, immune reaction, and detection, in one microchip. Moreover, the proposed chip design could improve batch-to-batch repeatability and avoid interferences between different channels without the preparation of complex microvalves. The total operation time of this system was less than 30 min, with a desirable detection limit of 0.2 pg/mL. The results indicate that the microfluidic platform is promising for the immunoassay of multiple clinical biomarkers.
Graphical abstract
The i-motif is a biologically relevant non-canonical DNA structure formed by cytosine-rich sequences. Despite the importance of the factors affecting the formation/stability of such a structure, like pH, cation type and concentration, no systematic study that simultaneously analysed their effect on the i-motif in vitro has been carried out so far. Therefore, here we report a systematic study that aims to evaluate the effect of these factors, and their possible interaction, on the formation of an i-motif structure. Our results confirm that pH plays the main role in i-motif formation. However, we demonstrate that the effect of the cation concentration on the i-motif is strictly dependent on the pH, while no significant differences are observed among the investigated cation types.
Graphical abstract
G-quadruplexes have been widely researched as new targets for cancer treatment owing to their non-canonical structure and crucial role in biological processes. Although attention has been paid to the development of selective G-quadruplex ligands, few studies have focused on the binding affinity of stereoisomers towards G-quadruplex, which will be conducive to support the optimal design of G-quadruplex ligands in future studies. Here, tetrandrine and isotetrandrine were used to study the binding affinity and difference of stereoisomers towards G-quadruplex structures. The results showed that tetrandrine had a high possibility of binding to the N-myc and Bcl-2 G-quadruplexes through hydrogen bonding, whereas the possibility of binding of isotetrandrine was low and it seemed to have no possibility of forming hydrogen bonds. Our study shows that optical isomerism of ligand molecules has an important effect on G-quadruplex recognition, which is helpful for the design of G-quadruplex ligands in future studies.
Graphical abstract
Folic acid (FA) is an essential vitamin in humans, and thus, rapid, accurate, and sensitive methods for its quantification in different biological samples are needed. This work describes a novel, simple, and effective dual-emission fluorescence nanoprobe for FA detection and quantification. The probe was covalently linked to amino-modified orange quantum dots (QDs) and carboxyl-modified blue graphene quantum dots (GQDs). The resulting material exhibited two emission peaks at 401 and 605 nm upon excitation at 310 nm. The probe had good selectivity and sensitivity toward FA with an exceptionally low detection limit (LOD = 0.09 nM). This probe was effectively used to quantify FA in animal serum samples. The method has potential utility for FA analysis in different types of biological samples.
Graphical abstract
Evaluation of post-translational modifications of protein molecules is important for both basic and applied biomedical research. Mass spectrometric quantitative studies of modifications, which do not change the mass of the protein, such as isomerization of aspartic acid, do not necessarily require the use of isotope-labelled standards. However, the accurate solution of this problem requires a deep understanding of the relationship between the mole fractions of the isomers and the peak intensities in the mass spectra. In previous studies on the isomerization of aspartic acid in short beta-amyloid fragments, it has been shown that calibration curves used for such quantitative studies often have a non-linear form. The reason for the deviation in the shape of the calibration curves from linearity has not yet been established. Here, we propose an explanation for this phenomenon based on a probabilistic model of the fragmentation process and present a general approach for the selection of fragments that can be used for quantitative studies of the degree of isomerization.
Graphical Abstract
Choosing an appropriate ion source is a crucial step in liquid chromatography mass spectrometry (LC/MS) method development. In this paper, we compare four ion sources for LC/MS analysis of 40 pesticides in tomato and garlic matrices. We compare electrospray ionisation (ESI) source, thermally focused/heated electrospray (HESI), atmospheric pressure photoionisation (APPI) source with and without dopant, and multimode source in ESI mode, atmospheric pressure chemical ionisation (APCI) mode, and combined mode using both ESI and APCI, i.e. altogether seven different ionisation modes. The lowest limits of detection (LoDs) were obtained by ESI and HESI. Widest linear ranges were observed with the conventional ESI source without heated nebuliser gas. In comparison to HESI, ESI source was significantly less affected by matrix effect. APPI ranked second (after ESI) by not being influenced by matrix effect; therefore, it would be a good alternative to ESI if low LoDs are not required.
Graphical abstract
The cholesterol-lowering properties of 12 lactic acid bacteria (LAB) in the absence or presence of 0.3% bile salts were assessed and compared quantitatively and qualitatively in vitro. A new, more sensitive and cost-effective high-performance thin-layer chromatography method combined with digital image evaluation of derivatised chromatographic plates was developed and validated to quantify cholesterol in LAB culture media. The performance of the method was compared with that of the o-phthalaldehyde method. For qualitative assessment, assimilated fluorescently tagged cholesterol was visualised by confocal microscopy. All LAB strains exhibited a cholesterol-lowering effect of various degrees (19–59% in the absence and 14–69% in the presence of bile salts). Lactobacillus plantarum LAB12 and Pentosaceus pentosaceus LAB6 were the two best strains of lactobacilli and pediococci. They lowered cholesterol levels by 59% and 54%, respectively, in the absence and by 69% and 58%, respectively, in the presence of bile salts. Confocal microscopy showed that cholesterol was localised at the outermost cell membranes of LAB12 and LAB6. The present findings warrant in-depth in vivo study.
(A) 3D plots based on scan at 525 nm of (B) derivatized HPTLC plate of separated cholesterol and (C) confocal microscopic image showing the localisation of NBD-cholesterol assimilated by LAB
A novel rhodamine–tryptamine conjugate–based fluorescent and chromogenic chemosensor (RTS) for detection of Hg2+ present in water was reported. After gradual addition of Hg2+ in aqueous methanol solution of RTS, a strong orange fluorescence and deep-pink coloration were observed. The probe showed high selectivity towards Hg2+ compared to other competitive metal ions. The 1:1 binding stoichiometry between RTS and Hg2+ was established by Job’s plot analysis and mass spectroscopy. Initial studies showed that the synthesized probe RTS possessed fair non-toxicity and effectively passed through cell walls of model cell systems, viz., human neuroblastoma (SHSY5Y) cells and cervical cells (HeLa) to detect intercellular Hg2+ ions, signifying its utility in biological system. The limit of detection (LOD) was found to be 2.1 nM or 0.42 ppb by fluorescence titration. Additionally, the potential relevance of synthesized chemosensor for detecting Hg2+ ions in environmental water samples has been demonstrated.
ᅟ
Identification and quantification of microplastics (MP) in environmental samples is crucial for understanding the risk and distribution of MP in the environment. Currently, quantification of MP particles in environmental samples and the comparability of different matrices is a major research topic. Research also focusses on sample preparation, since environmental samples must be free of inorganic and organic matrix components for the MP analysis. Therefore, we would like to propose a new method that allows the comparison of the results of MP analysis from different environmental matrices and gives a MP concentration in mass of MP particles per gram of environmental sample. This is possible by developing and validating an optimized and consistent sample preparation scheme for quantitative analysis of MP particles in environmental model samples in conjunction with quantitative 1H-NMR spectroscopy (qNMR). We evaluated for the first time the effects of different environmental matrices on identification and quantification of polyethylene terephthalate (PET) fibers using the qNMR method. Furthermore, high recovery rates were obtained from spiked environmental model samples (without matrix ~ 90%, sediment ~ 97%, freshwater ~ 94%, aquatic biofilm ~ 95%, and invertebrate matrix ~ 72%), demonstrating the high analytical potential of the method.
Graphical abstract
The preparation and fractionation of oligomeric proanthocyanidins (OPCs) are particularly important for the application of tannins in the biomedical field. By use of two different methods—gel filtration chromatography (GFC) with Sephadex LH-20 and progressive solvent precipitation—the OPCs were prepared and fractionated from mangosteen pericarp. The fractions were compared by reversed-phase and normal-phase high-performance liquid chromatography–electrospray ionization mass spectrometry and gel permeation chromatography. GFC directly purified oligomers (monomer to pentamer) with polydispersity values close to 1 and generated fractions with a higher level of total phenols (800.59 mg gallic acid equivalents per gram) but a lower yield (7.72%). Progressive solvent precipitation rapidly prepared and fractionated OPCs with a lower level of total phenols (609.57 mg gallic acid equivalents per gram) but a higher yield (24.74%) and higher polydispersity. Additionally, we found pronounced structural and quantitative differences among different tannin-rich fractions, and fractions obtained by GFC better reflected the structural diversity and complexity of OPCs from mangosteen pericarp. This study presents different ways of preparing and fractionating OPCs in the biomedical field.
We present a new observation of electrochemical oscillation during the reduction of Co2+ from sulfate solution in the presence of but-2-yne-1,4-diol (butynediol) as an additive. Cyclic voltammetry, hydrodynamic voltammetry at galvanostatic condition, and electrochemical impedance spectroscopic studies suggest that the electrochemical oscillation observed was a relaxation type and was the manifestation of adsorbed hydrogen formation by electrochemical reduction of protons on cobalt and their chemical removal by semi-hydrogenation of butynediol to butenediol during the initial stages of electrodeposition.
Graphical abstract
A novel colorimetric sensing platform based on the peroxidase activity of hemin regulated by oligonucleotide and pesticide was reported for the ultrasensitive and selective detection of isocarbophos. Oligonucleotides can accumulate on the surface of hemin in acid condition and temporarily inhibit its catalytic activity, which results in the loss of one electron of TMB molecule and produce the blue products. With the addition of isocarbophos, the pesticide molecules can interact with oligonucleotides to form some complexes, which relieve the inhibition of ssDNA to hemin and further enhance its catalytic activity. Thus, the TMB molecules are further oxidized to lose another electron and produce the yellow product in a few minutes, which has the characteristic absorption peak at 450 nm. The color change of the sensing system is related to the amount of isocarbophos, so this method can quickly discriminate whether the target pesticide exceeds the maximal residue limit just by naked eyes. To improve the performance of sensing platform, some important parameters like buffer condition and ssDNA have been investigated, and the peroxidase activity of hemin was further studied to verify the catalytic mechanism. The proposed sensing platform has a detection limit as low as 0.6 μg/L and displays good selectivity against other competitive pesticides. Moreover, the developed sensing platform also exhibits favorable accuracy and stability, indicating that it has potential applications in the detection of pesticide residues in agricultural products.
A novel colorimetric sensing platform based on oligonucleotides and pesticide regulation; the peroxidase catalytic activity of hemin was firstly reported for the ultrasensitive and selective detection of isocarbophos pesticide.
Metals often are classified as “noble” or “base”—characterizing their reduction potential as one of the most important chemical properties. We show that metals are only as noble as allowed by their environment, i.e. this is a relative term, and the “frame of reference” simply is the solvent in which the redox system is present. We prove that silver is a prime example for a noble metal that forfeits its noble character in the simple ionic liquid HMIM Br (1-hexyl-3-methylimidazolium bromide) as an example for such a solvent.
Graphical Abstract
This work reports on further development of an inhibition electrochemical sensor array based on immobilized bacteria for the preliminary detection of a wide range of organic and inorganic pollutants, such as heavy metal salts (HgCl2, PbCl2, CdCl2), pesticides (atrazine, simazine, DDVP), and petrochemicals (hexane, octane, pentane, toluene, pyrene, and ethanol) in water. A series of DC and AC electrochemical measurements, e.g., cyclic voltammograms and impedance spectroscopy, were carried out on screen-printed gold electrodes with three types of bacteria, namely Escherichia coli, Shewanella oneidensis, and Methylococcus capsulatus, immobilized via poly l-lysine. The results obtained showed a possibility of pattern recognition of the above pollutants by their inhibition effect on the three bacteria used. The analysis of a large amount of experimental data was carried out using an artificial neural network (ANN) programme for more accurate identification of pollutants as well as the estimation of their concentration. The results are encouraging for the development of a simple and cost-effective biosensing technology for preliminary in-field analysis (screening) of water samples for the presence of environmental pollutants.
Graphical abstract
In this work, the electrochemical performance of Na-doped layered cathode material LiCoO2 for Li-ion batteries is studied using first-principles calculations. The results show that the doped Na ion acts as a pillar, which can greatly increase the diffusion rate of Li ions, but it is not conducive to improving cycle performance and delithiation potential. These research results provide a theoretical reference for the study of Li-ion batteries with high-rate performance. Due to the conflicting role of single element doping, the multi-element co-doping strategy will be the best way to develop high-performance Li-ion batteries.
Graphical abstractIn this work, a straightforward analytical approach based on headspace solid-phase microextraction coupled with gas chromatography-mass spectrometry was developed for the analysis of salivary volatile organic compounds without any prior derivatization step. With a sample volume of 500 μL, optimal conditions were achieved by allowing the sample to equilibrate for 10 min at 50 °C and then extracting the samples for 10 min at the same temperature, using a carboxen/polydimethylsiloxane fibre. The method allowed the simultaneous identification and quantification of 20 compounds in sample headspace, including short-chain fatty acids and their derivatives which are commonly analysed after analyte derivatization. The proof of applicability of the methodology was performed with a case study regarding the analysis of the dynamics of volatile metabolites in saliva of a single subject undergoing 5-day treatment with rifaximin antibiotic. Non-stimulated saliva samples were collected over 3 weeks from a nominally healthy volunteer before, during, and after antibiotic treatment. The variations of some metabolites, known to be produced by the microbiota and by bacteria that are susceptible to antibiotics, suggest that the study of the dynamics of salivary metabolites can be an excellent indirect method for analysing the gut microbiota. This approach is novel from an analytical standpoint, and it encourages further studies combining saliva metabolite profiles and gut microbiota dynamics.
Graphical abstract
An ion chromatography and solid-phase extraction method has been applied for the separation and detection of morpholinium cations in environmental water samples. The water samples were purified and enriched by a UF-SCX sulfonic acid extraction column and eluted with 0.5 mol L−1 phosphoric acid/sodium dihydrogen phosphate buffer solution/55% methanol. The target compounds were separated on a carboxylic acid cation exchange column with 5.0 mmol L−1 methane sulfonic acid/2% acetonitrile as the mobile phase and direct conductivity detection. The method has been successfully applied to extract morpholinium cations from spiked water samples of Songhua River, Hulan River, East Lake, and Mopanshan Reservoir in China with the recoveries ranging from 75.0% to 98.3%. The relative standard deviations of intraday precision and interday precision are 2.1% and 5.9% or less, respectively. Using this method it is possible to preconcentrate water samples to 0.01–0.04 mg L−1. The results show that the method is applicable to detection of morpholinium ionic liquid cations in environmental water samples and provides a new approach for monitoring ionic liquids in environmental water.
The analysis procedure of morpholinium ionic liquids in environmental water samples.
One of the main challenges in large-scale applications of molecularly imprinted polymers (MIPs) is the significant amount of template needed in polymer preparation. A new strategy based on room-temperature ionic liquids (RTILs) was suggested to solve this problem by reducing the amount of template in the polymerization recipe. The MIP was synthesized with a mixture of dimethyl sulfoxide and RTIL (1-butyl-3-methylimidazolium tetrafluoroborate) as porogen, in which chlorogenic acid (CGA) was used as template, 4-vinylpyridine (4-VP) as functional monomer, and ethylene glycol dimethacrylate (EDMA) as cross-linker. The influence of polymerization variables, including CGA concentrations, and the ratio of 4-VP to EDMA on imprinting effect were investigated comprehensively. Moreover, the properties involving the column permeability, the number of binding sites, and the polymer morphology of the CGA-MIP monoliths were studied thoroughly. The MIP monolith had an excellent column permeability (1.53 × 10−13 m2) and allowed an ultra-fast on-line SPE, which dramatically shortens the separation time (< 10 min) and improves the separation efficiency. At high flow velocity (5.0 mL min−1), 50 μL of the extract from Eucommia ulmoides leaves can be loaded directly on the CGA-MIP monoliths and CGA with high purity can be obtained with a recovery of 89.01 ± 0.05%. As a conclusion, the resulting RTIL-induced approach of preparing MIP may be an effective tool in fabricating MIP in a low-cost way.
ᅟ